| A 135 | BIP (Oldbury) Ltd | A 135 is a non ionic polyethylene emulsion, in a low viscosity liquid. It is used primarily to improve tear strength and can be used on any fabric. | |
| A 154 | BIP (Oldbury) Ltd | A 154 is a modified dicyandiamide formaldehyde precondensate. It is a clear colourless cationic solution. It is primarily used to improve wet fastness of direct dyes. | |
| A 174 | BIP (Oldbury) Ltd | A 174 is a non re-wetting emulsifier. It is designed for use with water repellants and fluorochemical finishes. It an also be used as a foaming agent for use in foam finishing systems. | |
| A 199 | BIP (Oldbury) Ltd | A 199 is a permanent repellant for all fibre types. | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| AC 119 | BIP (Oldbury) Ltd | AC 119 is a modified magnesium chloride catalyst. In a highly reactivity, low PH clear solution. It has applications where high production speeds required. | |
| AC 178 | BIP (Oldbury) Ltd | AC 178 is a magnesium chloride catalyst. It has medium reactivity and is a clear solution. It is mainly used in medium cure catalyst having minimum effect on shade. | |
| AC 600 | BIP (Oldbury) Ltd | AC 600 is an amine salt of p-toluene sulphonic acid in isopropanol. It is a highly reactive, clear solution. Primarily recommended for use in curing HMMM resin PT 370. | |
| BCP | BIP (Oldbury) Ltd | BCP is a blend of waterbased synthetic polymers. Primarily used as a coating on fabric to prevent wrinkles. It can be used in conjunction with PT 939C or A 135 and can be used for single pass systems. | |
| BEETLE® PT312 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise wate...view more PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT312 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT336 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders...view more PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT336 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT355 - Wet Strength Resin | BIP (Oldbury) Ltd | PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envel...view more PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes, sack-krafts, laundry tags, tea-bag tissue, and label papers. When used under optimum conditions of pH (4.5 - 6.5) and heat input, the resin will also improve basic sheet dry strength. An added benefit is that PT355 colloid will enhance the performance of rosin sizing agents. view less | |
| BEETLE® PT746 - Neutral Cure Wet Strength Resin | BIP (Oldbury) Ltd | PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile,...view more PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile, multifunctional product, useful in other applications and areas of the paper-making process. PT746 is used to impart wet strength in the production of a wide variety of papers based upon all cellulosic or all synthetic furnishes, or blends of both fibre types, when used under neutral to alkaline conditions. Higher dry strength often results from the use of PT746, particularly where high or all synthetic fibre furnishes are involved. view less | |
| BEETLE® PT789 - Wet Strength Resin | BIP (Oldbury) Ltd | PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack...view more PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack-krafts, when such products are made at pH levels below neutral. Since PT789 is a melamine resin, it is particularly suited to the production of higher quality, more demanding paper products such as hot-filters, laundry-tag, currency, security and bottle label papers. view less | |
| Eco-Phyl® | Imerys Performance Additives | Eco-Phyl® is derived from a unique coalescence of mica, quartz and chlorite, known as leucophyllite. It has a lamellar particle shape which improves the mechanical properties and weather resistance of paints and coatings. As it is chemically inert, it can...view more Eco-Phyl® is derived from a unique coalescence of mica, quartz and chlorite, known as leucophyllite. It has a lamellar particle shape which improves the mechanical properties and weather resistance of paints and coatings. As it is chemically inert, it can be used in all types of resins. It is recommended for indoor and outdoor decorative systems. view less | |
| Jetfine® 1 | Imerys Performance Additives | Jetfine® 1 is an ultra-fine, micronized talc which significantly increases hiding power. Jetfine® 1 has a top cut of 5μm and a median particle size of 1μm. | |
| Luzenac 0 | Imerys Performance Additives | Luzenac 0 is talc/chlorite with low oil absorption. Recommended for industrial applications such as low VOC coatings, plasters, adhesives and jointing compounds. | |
| Luzenac 00C | Imerys Performance Additives | Luzenac 00C is a high brightness talc/chlorite for decorative matte paints. Easy to disperse in water-based paints. Reduces mud-cracking. | |
| Luzenac 10M0 | Imerys Performance Additives | Luzenac 10M0 is a fine talc/chlorite. Recommended for water- and solvent-borne decorative paints, industrial primers and topcoats, automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and ...view more Luzenac 10M0 is a fine talc/chlorite. Recommended for water- and solvent-borne decorative paints, industrial primers and topcoats, automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and gloss adjustment. view less | |
| Luzenac 10M2 | Imerys Performance Additives | Luzenac 10M2 is a fine talc/chlorite. Recommended for water- and solvent-borne industrial primers and topcoats, and automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and gloss adjustmen...view more Luzenac 10M2 is a fine talc/chlorite. Recommended for water- and solvent-borne industrial primers and topcoats, and automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and gloss adjustment. view less | |
| Luzenac 20M0 | Imerys Performance Additives | Luzenac 20M0 is a multipurpose fine talc/chlorite. Suitable for water- and solvent-borne Decorative paints and Industrial primers. Enhances dispersability in water-based paints, lowers viscosities in polar and non-polar bases. | |
| Luzenac 20M2 | Imerys Performance Additives | Luzenac 20M2 is a multipurpose fine talc/chlorite. It is suitable for water- and solvent-borne industrial primers. This product enhances dispersability in water-based paints, lowers viscosities in polar and non-polar bases. | |
| Luzenac H100 | Imerys Performance Additives | Luzenac H100 is a coarse talc/chlorite with low oil absorption. Recommended for high build low VOC coatings and self-leveling floor coatings. | |
| Luzenac ST60 | Imerys Performance Additives | Luzenac ST60 is a standard talc/chlorite grade with low oil absorption for low VOC industrial primers providing good corrosion resistance. Allows high filling in polyester putties with good sandability. | |
| MICA-MU™ M2/1 | Imerys Performance Additives | MICA-MU™ M2/1 is a white, micronised mica. This product is used in water based decorative paints, solvent based decorative paints, protective and OEM coatings, as well as sealant primer applications. | |
| Mistrogard® 15 | Imerys Performance Additives | Mistrogard®15 is a lamellar talc/magnesite mineral extender that is proposed for automotive refinishing sandable primers and general industrial coatings. It is especially recommended for high solids coating systems. | |
| Mistrogard® 45 | Imerys Performance Additives | Mistrogard® 45 is a lamellar talc/magnesite extender that provides barrier properties and improves corrosion resistance. Mistrogard® 45 is recommended for high solids epoxy primers, marine and protective coatings. | |
| Mistrogard® 75 | Imerys Performance Additives | Mistrogard® 75 is a talc/magnesite with a platy structure. It is a cost-effective, functional mineral extender with high loading properties for auto body compounds, caulks, putties, sealants and high build coatings. | |
| Mistron® 754 G | Imerys Performance Additives | Mistron® 754 G is a talc with low oil absorption for usage in low VOC coatings, adhesives and wood filler. Allows high filling with good barrier effect and sanding properties. | |
| Mistron® Monomix G | Imerys Performance Additives | Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers...view more Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers, decorative paints, colorants, gel coats and varnishes. view less | |
| Mistron® R20 G | Imerys Performance Additives | Mistron® R20 G is a high brightness talc suitable for decorative and industrial applications. Improves opacity, barrier properties, corrosion resistance, gloss control, sandability and stain blocking ability. | |
| NYAD® M1250 | Imerys Performance Additives | NYAD® M1250 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coating...view more NYAD® M1250 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings, industrial coatings, wind turbine coatings, automotive refinishes, aerospace coatings, and more. This product has a medium particle size of 4µm. view less | |
| NYAD® M325 | Imerys Performance Additives | NYAD® M325 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings...view more NYAD® M325 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings, industrial coatings, wind turbine coatings, automotive refinishes, aerospace coatings, and more. This product has a medium particle size of 12µm. view less | |
| NYAD® M400 | Imerys Performance Additives | NYAD® M400 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings...view more NYAD® M400 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings, industrial coatings, wind turbine coatings, automotive refinishes, aerospace coatings, and more. This product has a medium particle size of 9µm. view less | |
| NYAD® M9000 | Imerys Performance Additives | NYAD® M9000 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coating...view more NYAD® M9000 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings, industrial coatings, wind turbine coatings, automotive refinishes, aerospace coatings, and more. This product has a medium particle size of 3µm. view less | |
| Plastorit® 0 | Imerys Performance Additives | Plastorit® 0 is a low oil absorption mica/quartz/chlorite filler for epoxy flooring, building putties, plasters and traffic paints. | |
| Plastorit® 00 | Imerys Performance Additives | Plastorit® 00 is a low oil absorption mica/quartz/chlorite for improving the durability and UV resistance of exterior wall paints. Improves the scrub and burnishing resistance of interior wall paints. | |
| Plastorit® 000 | Imerys Performance Additives | Plastorit® 000 is a mica/quartz/chlorite filler and extender pigment. | |
| Plastorit® 0000 | Imerys Performance Additives | Plastorit® 0000 is a low oil absorption mica/quartz/chlorite for high performance low VOC marine, protective coatings and industrial primers. Reduces settling in epoxy flooring. | |
| Plastorit® 0.25 | Imerys Performance Additives | Plastorit® 0.25 is a coarse mica/quartz/chlorite for exterior textured matt wall paints. Provides anti-slip properties in epoxy flooring and traffic paints. | |
| Plastorit® Micro | Imerys Performance Additives | Plastorit® Micro is a fine low oil absorption mica/quartz/chlorite for industrial primers and anti-corrosion coatings. | |
| Plastorit® Super | Imerys Performance Additives | Plastorit® Super is a fine low oil absorption mica/quartz/chlorite for industrial primers. Recommended for high gloss polyurethane topcoats. | |
| PT 312 | BIP (Oldbury) Ltd | PT 312 is a methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening of all fibre types. It has a low free formaldehyde version PT 338. | |
| PT 322 | BIP (Oldbury) Ltd | PT 322 is a modified urea resin. Primarily used in the production of economic fabric stiffeners. | |
| PT 336 | BIP (Oldbury) Ltd | PT 336 Methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening and binding of all fibre types. This product exhibits medium to high reactivity. | |
| PT 338 | BIP (Oldbury) Ltd | PT 338 is a methylated melamine resin. Primarily used as a resin for stiffening of all fabric types. | |
| PT 350 | BIP (Oldbury) Ltd | PT 350 is a modified reactant resin. Primarily used as a cross Linking Resins for Acrylic Pastes and coatings and use as fabric stiffeners or binders. It combines easy care with additive fixation. | |
| PT 368 | BIP (Oldbury) Ltd | PT 368 is a modified methylated melamine resin. It can be used to create a cost effective stiffening agent and binder. | |
| PT 370 | BIP (Oldbury) Ltd | PT 370 is a fully methylated HMMM resin. It is primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 3745 | BIP (Oldbury) Ltd | PT 3745 is a fully methylated HMMM resin. Primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 726 | BIP (Oldbury) Ltd | PT 726 is a modified polymer of ethylene urea. It is a non-ionic, clear to pale yellow, formaldehyde free liquid. Primarily used for crease resistant finishes on cellulose fiber fabrics when formaldehyde free product and requires no special catalyst. | |
| PT 727 | BIP (Oldbury) Ltd | PT 727 is a modified urea formaldehyde polymer. It is a clear, straw coloured cationic liquid. Primarily used for anchoring thermoplastic coatings to regenerated cellulose film. | |
| PT 729 | BIP (Oldbury) Ltd | PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine r...view more PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine retention is of no importance. view less | |
| PT 931 | BIP (Oldbury) Ltd | PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. Th...view more PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. This product gives improved chlorine resistance and very low residual formaldehyde. view less | |
| PT 933 | BIP (Oldbury) Ltd | PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and...view more PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and Japanese Law 112 for baby wear and good chlorine resistance. view less | |
| PT 939 C | BIP (Oldbury) Ltd | PT 939 C is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. It is very reactive and primarily used with BCP for excellent DP ratings on cellulose fabrics. | |
| S 144 | BIP (Oldbury) Ltd | S 144 is a type of cationic softener. it has a suitable use as a softener for all cellulosic and polyester cellulose blends. | |
| Steabright® | Imerys Performance Additives | Steabright® is a high brightness talc/chlorite for decorative paints. Provides optimal brightness, hiding power and matting. Easy to disperse in water-based paints. Reduces mud-cracking. | |
| Steamat® | Imerys Performance Additives | Steamat® is a talc/chlorite developed for matting of interior and exterior wall paints and masonry paints. Recommended for deep matt decorative paints and reduced mud-cracking. Provides good durability for exterior paints. The low oil absorption of this g...view more Steamat® is a talc/chlorite developed for matting of interior and exterior wall paints and masonry paints. Recommended for deep matt decorative paints and reduced mud-cracking. Provides good durability for exterior paints. The low oil absorption of this grade makes it suitable for use in high build low VOC marine and protective coatings. view less | |
| Steashield™ 10 | Imerys Performance Additives | Steashield™ 10 is an ultra lamellar talc imparting significant barrier properties for high added value paint and coating applications such as stain-blocking paints and anti-corrosive coatings. | |
| Steopac® | Imerys Performance Additives | Steopac® is a fine high brightness talc/chlorite for prime pigment extension in decorative coatings. Provides optimal opacity, gloss adjustment, rheology control and barrier properties in water- and solvent-borne paints and lacquers. Fine grade, easily di...view more Steopac® is a fine high brightness talc/chlorite for prime pigment extension in decorative coatings. Provides optimal opacity, gloss adjustment, rheology control and barrier properties in water- and solvent-borne paints and lacquers. Fine grade, easily dispersible in water-borne systems reducing energy consumption and improving productivity. view less | |
| Steopac® C | Imerys Performance Additives | Steopac® C is an easily dispersible Steopac® in compacted form. It reduces incorporation and dispersion time in mill base. Easy to handle and store. | |
| Surkofilm® 64S | BIP (Oldbury) Ltd | Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It imparts softness and flexibility for reverse printing on PE and OPP. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Surkofilm® 62H | BIP (Oldbury) Ltd | Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is a harder version Surkofilm® 64S. view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less | |
| Surkofilm® 71H | BIP (Oldbury) Ltd | Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is used for the production of lamination inks for nylon and other films. view less | |
| Surkofilm® 72S | BIP (Oldbury) Ltd | Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is generally used for reverse printing & lamination inks. view less | |
| Surkofilm® 90H | BIP (Oldbury) Ltd | Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where...view more Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It has low viscosity and a hard PU component when in combination with vinyl resins. view less | |
| Surkofilm® MR 132 | BIP (Oldbury) Ltd | Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wh...view more Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Surkofilm® MR 132 is a mixed aromatic/aliphatic polyurethane for reverse printing onto PE & OPP. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less |
