| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...view more 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. view less | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...view more Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. view less | |
| Castor Oil | Castor International BV | Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial s...view more Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial segments, because of its unique molecule structure, such as lubricants in hydraulic fluids and 2 stroke engines, polyurethane in PU floor coatings, PU adhesives/sealants and PU foams, adhesives in hot-melts, and more. view less | |
| Castor Oil FSG Low Acid Value | Castor International BV | Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/...view more Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Oil FSG Low Water Content | Castor International BV | Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg K...view more Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Polyol (Type 114) | Castor International BV | Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in vari...view more Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in various fillers, like silicates, quartz, calcium carbonate and barites, additives and pigments as a leveling aids and defoamers and it may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Polyol (Type 115) | Castor International BV | Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and th...view more Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and the nature and addition of additives and fillers may vary depending on the particular formulation for making: adhesives, coatings, floorings, and electrical casting applications. view less | |
| Castor Polyol (Type 116) | Castor International BV | Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with ...view more Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with MDI and its variants or by aliphatic isocyanates like HDI, in combination with castor polyol types 114 and 115. Castor Polyol (Type 116) has many applications, for instance: in various fillers, like silicates, quartz, calcium carbonate, and barites: in additives and pigments, like leveling aids and defoamers: and may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Thickener (Blend) | Castor International BV | Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage ...view more Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Blend) has a melting point of 136°C to 140°C, a saponification value of 130 to 138 mg KOH/g, and an acid value of 6 mg KOH/g max. view less | |
| Castor Thickener (Pure) | Castor International BV | Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage st...view more Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Pure) has a melting point of 82°C to 88°C, a saponification value of 177 to 182 mg KOH/g, and an acid value of 4 mg KOH/g max. view less | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...view more Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...view more Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...view more Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Drying additive 3A (Paste 50) | Castor International BV | Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Paste 60) | Castor International BV | Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Powder) | Castor International BV | Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethan...view more Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 50) | Castor International BV | Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 60) | Castor International BV | Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Powder) | Castor International BV | Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyu...view more Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Eco-Phyl® | Imerys Performance Additives | Eco-Phyl® is derived from a unique coalescence of mica, quartz and chlorite, known as leucophyllite. It has a lamellar particle shape which improves the mechanical properties and weather resistance of paints and coatings. As it is chemically inert, it can...view more Eco-Phyl® is derived from a unique coalescence of mica, quartz and chlorite, known as leucophyllite. It has a lamellar particle shape which improves the mechanical properties and weather resistance of paints and coatings. As it is chemically inert, it can be used in all types of resins. It is recommended for indoor and outdoor decorative systems. view less | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...view more Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. view less | |
| Jetfine® 1 | Imerys Performance Additives | Jetfine® 1 is an ultra-fine, micronized talc which significantly increases hiding power. Jetfine® 1 has a top cut of 5μm and a median particle size of 1μm. | |
| Luzenac 0 | Imerys Performance Additives | Luzenac 0 is talc/chlorite with low oil absorption. Recommended for industrial applications such as low VOC coatings, plasters, adhesives and jointing compounds. | |
| Luzenac 00C | Imerys Performance Additives | Luzenac 00C is a high brightness talc/chlorite for decorative matte paints. Easy to disperse in water-based paints. Reduces mud-cracking. | |
| Luzenac 10M0 | Imerys Performance Additives | Luzenac 10M0 is a fine talc/chlorite. Recommended for water- and solvent-borne decorative paints, industrial primers and topcoats, automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and ...view more Luzenac 10M0 is a fine talc/chlorite. Recommended for water- and solvent-borne decorative paints, industrial primers and topcoats, automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and gloss adjustment. view less | |
| Luzenac 10M2 | Imerys Performance Additives | Luzenac 10M2 is a fine talc/chlorite. Recommended for water- and solvent-borne industrial primers and topcoats, and automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and gloss adjustmen...view more Luzenac 10M2 is a fine talc/chlorite. Recommended for water- and solvent-borne industrial primers and topcoats, and automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and gloss adjustment. view less | |
| Luzenac 20M0 | Imerys Performance Additives | Luzenac 20M0 is a multipurpose fine talc/chlorite. Suitable for water- and solvent-borne Decorative paints and Industrial primers. Enhances dispersability in water-based paints, lowers viscosities in polar and non-polar bases. | |
| Luzenac 20M2 | Imerys Performance Additives | Luzenac 20M2 is a multipurpose fine talc/chlorite. It is suitable for water- and solvent-borne industrial primers. This product enhances dispersability in water-based paints, lowers viscosities in polar and non-polar bases. | |
| Luzenac H100 | Imerys Performance Additives | Luzenac H100 is a coarse talc/chlorite with low oil absorption. Recommended for high build low VOC coatings and self-leveling floor coatings. | |
| Luzenac ST60 | Imerys Performance Additives | Luzenac ST60 is a standard talc/chlorite grade with low oil absorption for low VOC industrial primers providing good corrosion resistance. Allows high filling in polyester putties with good sandability. | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...view more MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. view less | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. view less | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. view less | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. view less | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. view less | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. view less | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...view more MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. view less | |
| MICA-MU™ M2/1 | Imerys Performance Additives | MICA-MU™ M2/1 is a white, micronised mica. This product is used in water based decorative paints, solvent based decorative paints, protective and OEM coatings, as well as sealant primer applications. | |
| Mistrogard® 15 | Imerys Performance Additives | Mistrogard®15 is a lamellar talc/magnesite mineral extender that is proposed for automotive refinishing sandable primers and general industrial coatings. It is especially recommended for high solids coating systems. | |
| Mistrogard® 45 | Imerys Performance Additives | Mistrogard® 45 is a lamellar talc/magnesite extender that provides barrier properties and improves corrosion resistance. Mistrogard® 45 is recommended for high solids epoxy primers, marine and protective coatings. | |
| Mistrogard® 75 | Imerys Performance Additives | Mistrogard® 75 is a talc/magnesite with a platy structure. It is a cost-effective, functional mineral extender with high loading properties for auto body compounds, caulks, putties, sealants and high build coatings. | |
| Mistron® 754 G | Imerys Performance Additives | Mistron® 754 G is a talc with low oil absorption for usage in low VOC coatings, adhesives and wood filler. Allows high filling with good barrier effect and sanding properties. | |
| Mistron® Monomix G | Imerys Performance Additives | Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers...view more Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers, decorative paints, colorants, gel coats and varnishes. view less | |
| Mistron® R20 G | Imerys Performance Additives | Mistron® R20 G is a high brightness talc suitable for decorative and industrial applications. Improves opacity, barrier properties, corrosion resistance, gloss control, sandability and stain blocking ability. | |
| NYAD® M1250 | Imerys Performance Additives | NYAD® M1250 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coating...view more NYAD® M1250 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings, industrial coatings, wind turbine coatings, automotive refinishes, aerospace coatings, and more. This product has a medium particle size of 4µm. view less | |
| NYAD® M325 | Imerys Performance Additives | NYAD® M325 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings...view more NYAD® M325 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings, industrial coatings, wind turbine coatings, automotive refinishes, aerospace coatings, and more. This product has a medium particle size of 12µm. view less | |
| NYAD® M400 | Imerys Performance Additives | NYAD® M400 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings...view more NYAD® M400 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings, industrial coatings, wind turbine coatings, automotive refinishes, aerospace coatings, and more. This product has a medium particle size of 9µm. view less | |
| NYAD® M9000 | Imerys Performance Additives | NYAD® M9000 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coating...view more NYAD® M9000 wollastonite is a natural calcium metasilicate (CaSiO3). Its low oil absorption, unique mineralogy and morphology make it an ideal extender for high performance low VOC coatings. NYAD® products are recommended for marine and protective coatings, industrial coatings, wind turbine coatings, automotive refinishes, aerospace coatings, and more. This product has a medium particle size of 3µm. view less | |
| Partially Dehydrated Castor Oil | Castor International BV | Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out....view more Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Partially Dehydrated Castor Oil has a characteristic odor and is a yellow oily liquid. It has an acid value of 5 mg KOH/g max and can be used as a hydrophobic and plasticizer component in paints, coatings, and moldings. view less | |
| PEG-25-CO | Castor International BV | PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB ...view more PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB of approximately 11, a saponification value of 70 to 90, and an iodine value of 30 to 50. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-25-HCO | Castor International BV | PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25...view more PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-HCO has a HLB of approximately 11 and a saponification value of 70 to 90. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-40-CO | Castor International BV | PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB ...view more PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB of approximately 14, a saponification value of 45 to 69, and an iodine value of 20 to 35. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-40-HCO | Castor International BV | PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40...view more PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-HCO has a HLB of approximately 14 and a saponification value of 45 to 69. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-60-CO | Castor International BV | PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB ...view more PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB of approximately 16, a saponification value of 40 to 51, and an iodine value of 15 to 30. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-60-HCO | Castor International BV | PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60...view more PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-HCO has a HLB of approximately 16 and a saponification value of 40 to 51. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-7-CO | Castor International BV | PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of...view more PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of approximately 5, a saponification value of 125 to 140, and an iodine value of 55 to 75. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-7-HCO | Castor International BV | PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-H...view more PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-HCO has a HLB of approximately 5 and a saponification value of 125 to 140. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| Plastorit® 0 | Imerys Performance Additives | Plastorit® 0 is a low oil absorption mica/quartz/chlorite filler for epoxy flooring, building putties, plasters and traffic paints. | |
| Plastorit® 00 | Imerys Performance Additives | Plastorit® 00 is a low oil absorption mica/quartz/chlorite for improving the durability and UV resistance of exterior wall paints. Improves the scrub and burnishing resistance of interior wall paints. | |
| Plastorit® 000 | Imerys Performance Additives | Plastorit® 000 is a mica/quartz/chlorite filler and extender pigment. | |
| Plastorit® 0000 | Imerys Performance Additives | Plastorit® 0000 is a low oil absorption mica/quartz/chlorite for high performance low VOC marine, protective coatings and industrial primers. Reduces settling in epoxy flooring. | |
| Plastorit® 0.25 | Imerys Performance Additives | Plastorit® 0.25 is a coarse mica/quartz/chlorite for exterior textured matt wall paints. Provides anti-slip properties in epoxy flooring and traffic paints. | |
| Plastorit® Micro | Imerys Performance Additives | Plastorit® Micro is a fine low oil absorption mica/quartz/chlorite for industrial primers and anti-corrosion coatings. | |
| Plastorit® Super | Imerys Performance Additives | Plastorit® Super is a fine low oil absorption mica/quartz/chlorite for industrial primers. Recommended for high gloss polyurethane topcoats. | |
| Polyol CI 1200/10 | Castor International BV | Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, ...view more Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/1200 | Castor International BV | Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...view more Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/240 | Castor International BV | Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI...view more Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/3600 | Castor International BV | Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...view more Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/400 | Castor International BV | Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI,...view more Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 29/825 | Castor International BV | Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (...view more Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 400/400 | Castor International BV | Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE app...view more Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 55/375 | Castor International BV | Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE appli...view more Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI T-400 | Castor International BV | Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, ...view more Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI X-630/1000 | Castor International BV | Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combin...view more Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...view more Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. view less | |
| Steabright® | Imerys Performance Additives | Steabright® is a high brightness talc/chlorite for decorative paints. Provides optimal brightness, hiding power and matting. Easy to disperse in water-based paints. Reduces mud-cracking. | |
| Steamat® | Imerys Performance Additives | Steamat® is a talc/chlorite developed for matting of interior and exterior wall paints and masonry paints. Recommended for deep matt decorative paints and reduced mud-cracking. Provides good durability for exterior paints. The low oil absorption of this g...view more Steamat® is a talc/chlorite developed for matting of interior and exterior wall paints and masonry paints. Recommended for deep matt decorative paints and reduced mud-cracking. Provides good durability for exterior paints. The low oil absorption of this grade makes it suitable for use in high build low VOC marine and protective coatings. view less | |
| Steashield™ 10 | Imerys Performance Additives | Steashield™ 10 is an ultra lamellar talc imparting significant barrier properties for high added value paint and coating applications such as stain-blocking paints and anti-corrosive coatings. | |
| Steopac® | Imerys Performance Additives | Steopac® is a fine high brightness talc/chlorite for prime pigment extension in decorative coatings. Provides optimal opacity, gloss adjustment, rheology control and barrier properties in water- and solvent-borne paints and lacquers. Fine grade, easily di...view more Steopac® is a fine high brightness talc/chlorite for prime pigment extension in decorative coatings. Provides optimal opacity, gloss adjustment, rheology control and barrier properties in water- and solvent-borne paints and lacquers. Fine grade, easily dispersible in water-borne systems reducing energy consumption and improving productivity. view less | |
| Steopac® C | Imerys Performance Additives | Steopac® C is an easily dispersible Steopac® in compacted form. It reduces incorporation and dispersion time in mill base. Easy to handle and store. | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...view more Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. view less |
