| ST-844 | Quaker Color (a Division of McAdoo & Allen, Inc.) | ST-844 is a solvent free, inherently dull, soft feel aliphatic urethane dispersion. ST-844 has a unique combination between soft feel, flexibility and toughness. It can be used in conjunction with isocyanate crosslinker or as is. | |
| STRUKTOSIL 45 MAM | Hoffmann Mineral | STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, rel...view more STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, released by-products are removed as far as possible during production. Undesirable byproducts, such as occur during in situ mixings (i.e. during the direct addition of the additives), are therefore practically completely prevented and the material improves its hydrophobic properties. view less | |
| Sunmide® 307D-60 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Sunmide® 307D-60 Curing Agent is a polyamide amine in xylene and n-butanol. It displays very good thixotropic properties. It is most commonly used for fast cure and fast dry applications for industrial epoxy coatings. | Request Sample |
| Surkofilm® 64S | BIP (Oldbury) Ltd | Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It imparts softness and flexibility for reverse printing on PE and OPP. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Surkofilm® 62H | BIP (Oldbury) Ltd | Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is a harder version Surkofilm® 64S. view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less | |
| Surkofilm® 71H | BIP (Oldbury) Ltd | Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is used for the production of lamination inks for nylon and other films. view less | |
| Surkofilm® 72S | BIP (Oldbury) Ltd | Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is generally used for reverse printing & lamination inks. view less | |
| Surkofilm® 90H | BIP (Oldbury) Ltd | Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where...view more Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It has low viscosity and a hard PU component when in combination with vinyl resins. view less | |
| Surkofilm® MR 132 | BIP (Oldbury) Ltd | Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wh...view more Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Surkofilm® MR 132 is a mixed aromatic/aliphatic polyurethane for reverse printing onto PE & OPP. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less | |
| Synthalat A-BWH 2172 | Synthopol Chemie Germany | Synthalat A-BWH 2172 is an aqueous binder for the production of baking primers and enamels. It can be crosslinked with melamine resins as well as with blocked polyisocyanates – also without these crosslinkers, excellent corrosion resistance and adhesion o...view more Synthalat A-BWH 2172 is an aqueous binder for the production of baking primers and enamels. It can be crosslinked with melamine resins as well as with blocked polyisocyanates – also without these crosslinkers, excellent corrosion resistance and adhesion on steel can be achieved. view less | |
| SYNTHALAT QWK 3517 | Synthopol Chemie Germany | SYNTHALAT QWK 3517 is a water-based acrylic-modified alkyd resin. It can be used for water-based primers and one-layer coats. | |
| Tacksol ER 19 | Ichemco | Tacksol ER 19 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%. Tacksol ER 19 is most commonly used in adhesive and primer formulation applications. | |
| Tacksol SPR 33 | Ichemco | Tacksol SPR 33 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 32-34%. Tacksol SPR 33 is most commonly used spray application development applications. | |
| Tackwhite A 2P 50 | Ichemco | Tackwhite A 2P 50 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 2P 50 is most commonly used in pressure sensitive article productio...view more Tackwhite A 2P 50 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 2P 50 is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V) | Ichemco | Tackwhite A 2P 50 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Tackwhite A 2P 50 (V) is most commonly used in pressure sensitive article ...view more Tackwhite A 2P 50 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Tackwhite A 2P 50 (V) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V1) | Ichemco | Tackwhite A 2P 50 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 2P 50 (V1) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 50 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 2P 50 (V1) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V2) | Ichemco | Tackwhite A 2P 50 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 50 (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 50 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 50 (V2) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 | Ichemco | Tackwhite A 2P 60 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 600-900 mPa.s. Tackwhite A 2P 60 is most commonly used in pressure sensitive article production...view more Tackwhite A 2P 60 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 600-900 mPa.s. Tackwhite A 2P 60 is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 (V) | Ichemco | Tackwhite A 2P 60 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 4000-5000 mPa.s. Tackwhite A 2P 60 (V) is most commonly used in pressure sensitive article ...view more Tackwhite A 2P 60 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 4000-5000 mPa.s. Tackwhite A 2P 60 (V) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 (V2) | Ichemco | Tackwhite A 2P 60 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 60 (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 60 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 60 (V2) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 4 MED | Ichemco | Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applicatio...view more Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. view less | |
| Tackwhite A 4 MED (V2) | Ichemco | Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. view less | |
| Tackwhite A5 MED | Ichemco | Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production...view more Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production where high adhesion, water resistance, and cold resistance are required. view less | |
| TEGO® Foamex 11 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints. | Request Sample |
| TEGO® Protect 5000 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro...view more TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro- and oleophobic properties for 2-pack coatings based on acrylic/isocyanate and polyester/isocyanate applications. TEGO® Protect 5000 N is dilutable by esters, ketones and glycol ethers and is recommended to be added at the grind stage in pigmented formulations. view less | Request Sample |
| TEGO® Therm HPG 4000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm HPG 4000 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 4000 can be combined with other materials to produce thermal insulation coatings. | Request Sample |
| TEGO® Therm HPG 6806 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm HPG 6806 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 6806 can be combined with other materials to produce thermal insulation coatings. | Request Sample |
| TEGO® Therm L 300 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm L 300 is a hybrid polysiloxane dispersion. | Request Sample |
| TEGOSTAB® B 8900 | Evonik Operations GmbH, BL Comfort & Insulation | TEGOSTAB® B 8900 is a silicone-based surfactant with strong cell-opening and degassing properties. | |
| Terfenol TF 840 | Respol Resinas | Terfenol TF 840 is a resin that can be used in paints and oleoresinous varnishes. This product confers good hardness, fast drying, good adhesion, and gloss to the end product. Its softening point ranges between 120-135 degrees Celsius and its acid value...view more Terfenol TF 840 is a resin that can be used in paints and oleoresinous varnishes. This product confers good hardness, fast drying, good adhesion, and gloss to the end product. Its softening point ranges between 120-135 degrees Celsius and its acid value is less than 20 mg of potassium hydroxide per gram. view less | |
| Tergraf TG ND2000 | Respol Resinas | Tergraf TG ND2000 is a phenolic modified rosin ester that can be used in varnishes. This product is a transesterified resin designed to avoid the cooked oil process. Its cloud point ranges between 100-115 degrees Celsius and it contains 40% solids. | |
| Tergraf TG ND2030 | Respol Resinas | Tergraf TG ND2030 is a phenolic modified rosin ester that can be used in offset printing inks. This product offers good printing properties with good stability on press. Its cloud point ranges between 68-78 degrees Celsius and it contains 50% solids. | |
| Tergraf TG ND2333 | Respol Resinas | Tergraf TG ND2333 is a phenolic modified rosin ester that can be used in offset inks. This product has a very high molecular weight and low polarity for a resin. Its cloud point ranges between 118-128 degrees Celsius and it contains 35% solids. | |
| Tergraf TG UZ-71 | Respol Resinas | Tergraf TG UZ-71 is a phenolic modified rosin ester that can be used in web offset heatset inks, quickset inks, and news inks. This product is a medium viscosity resin whose cloud point ranges between 85-95 degrees Celsius and it contains 45% solids. | |
| Tergraf TG UZ-73 | Respol Resinas | Tergraf TG UZ-73 is a phenolic modified rosin ester that can be used in conjunction with other higher viscosity or lower solubility phenolic rosin resins that will optimize the printing process. This product's cloud point ranges between 65-75 degrees Cel...view more Tergraf TG UZ-73 is a phenolic modified rosin ester that can be used in conjunction with other higher viscosity or lower solubility phenolic rosin resins that will optimize the printing process. This product's cloud point ranges between 65-75 degrees Celsius and it contains 45% solids. view less | |
| Tergraf TG UZ-76 | Respol Resinas | Tergraf TG UZ-76 is a phenolic modified rosin ester that can be used in high gloss varnishes with good heat setting properties. This product is a medium viscosity resin whose cloud point ranges between 95-105 degrees Celsius and it contains 42.5% solids. | |
| Tergraf TG UZ-77 | Respol Resinas | Tergraf TG UZ-77 is a phenolic modified rosin ester that can be used in heatset inks and varnishes. This product has good setting properties, high gloss, and low tack. Its cloud point ranges between 115-135 degrees Celsius and it contains 45% solids. | |
| Tergraf TG UZ-78 | Respol Resinas | Tergraf TG UZ-78 is a phenolic modified rosin ester that can be used in heatset inks and varnishes. This product has good setting properties, high gloss, and low tack. Its cloud point ranges between 45-55 degrees Celsius and it contains 45% solids. | |
| Tergraf TG UZ-79 | Respol Resinas | Tergraf TG UZ-79 is a phenolic modified rosin ester that can be used in lithographic applications. This product sets quickly with high film hardness and gloss. Its cloud point ranges between 117-127 degrees Celsius and it contains 42.5% solids. | |
| Tergraf TG UZ-80 | Respol Resinas | Tergraf TG UZ-80 is a phenolic modified rosin ester that can be used in lithographic applications. This product sets quickly with high film hardness and gloss. Its cloud point ranges between 45-65 degrees Celsius and it contains 45% solids. | |
| Tergraf TG UZ-81 | Respol Resinas | Tergraf TG UZ-81 is a phenolic modified rosin ester that can be used to provide better gloss and ink stability in printing applications. This product is soluble in mineral oils. Its cloud point ranges between 90-100 degrees Celsius and it contains 42.5%...view more Tergraf TG UZ-81 is a phenolic modified rosin ester that can be used to provide better gloss and ink stability in printing applications. This product is soluble in mineral oils. Its cloud point ranges between 90-100 degrees Celsius and it contains 42.5% solids. view less | |
| Tergraf TG UZ-85 | Respol Resinas | Tergraf TG UZ-85 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud poin...view more Tergraf TG UZ-85 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud point ranges between 80-90 degrees Celsius and it contains 40% solids. view less | |
| Tergraf TG UZ-86 | Respol Resinas | Tergraf TG UZ-86 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud poin...view more Tergraf TG UZ-86 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud point ranges between 80-90 degrees Celsius and it contains 35% solids. view less | |
| Tergraf TG UZ-87 | Respol Resinas | Tergraf TG UZ-87 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud poin...view more Tergraf TG UZ-87 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud point ranges between 125-135 degrees Celsius and it contains 37.5% solids. view less | |
| Tergraf TG UZ-90 | Respol Resinas | Tergraf TG UZ-90 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud poin...view more Tergraf TG UZ-90 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud point ranges between 95-115 degrees Celsius and it contains 37.5% solids. view less | |
| Tergraf TG UZ-93 | Respol Resinas | Tergraf TG UZ-93 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud point ...view more Tergraf TG UZ-93 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud point ranges between 75-85 degrees Celsius and it contains 40% solids. view less | |
| Tergraf TG UZ-96 | Respol Resinas | Tergraf TG UZ-96 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud point ...view more Tergraf TG UZ-96 is a phenolic modified rosin ester that can be used to increase printability and hold out. This product has high tolerance to mineral oils with low K.B. value, and will gellify easily with a low amount of a gelling agent. Its cloud point ranges between 55-65 degrees Celsius and it contains 40% solids. view less | |
| Tergraf TG901 | Respol Resinas | Tergraf TG901 is a phenolic modified rosin ester that can be used in high-quality sheetfed or quickset inks. This product dries quickly and has high rub resistance. Its cloud point ranges between 105-120 degrees Celsius and it contains 42.5% solids. | |
| Tergraf TG902 | Respol Resinas | Tergraf TG902 is a phenolic modified rosin ester that can be used in high-quality sheetfed or quickset inks. This product dries quickly and has high rub resistance. Its cloud point ranges between 80-100 degrees Celsius and it contains 42.5% solids. | |
| Tergraf TG903 | Respol Resinas | Tergraft TG903 is a phenolic modified rosin ester that can be used in setting inks with higher gloss systems. This product has a medium viscosity and its softening point ranges between 105-125 degrees Celsius. It contains 40% solids. | |
| Tergraf TG905 | Respol Resinas | Tergraf TG905 is a phenolic modified rosin ester that can be used in high quality printing applications. This product offers high gloss, good drying, and good rub resistance. Its cloud point ranges between 110-125 degrees Celsius and it contains 40% sol...view more Tergraf TG905 is a phenolic modified rosin ester that can be used in high quality printing applications. This product offers high gloss, good drying, and good rub resistance. Its cloud point ranges between 110-125 degrees Celsius and it contains 40% solids. view less | |
| Tergraf TG908 | Respol Resinas | Tergraf TG908 is a phenolic modified rosin ester that can be used in offset inks and in letdown applications. This product has a very high viscosity with a very low mineral oil tolerance. Its cloud point ranges between 150-170 degrees Celsius and it con...view more Tergraf TG908 is a phenolic modified rosin ester that can be used in offset inks and in letdown applications. This product has a very high viscosity with a very low mineral oil tolerance. Its cloud point ranges between 150-170 degrees Celsius and it contains 35% solids. view less | |
| Tertac TT 130 | Respol Resinas | Tertac TT 130 is a fumaric resin esterified adduct that can be used in combination with other resins to optimise printing properties in lithographic inks. This product's cloud point ranges between 70-80 degrees Celsius, and its softening point ranges bet...view more Tertac TT 130 is a fumaric resin esterified adduct that can be used in combination with other resins to optimise printing properties in lithographic inks. This product's cloud point ranges between 70-80 degrees Celsius, and its softening point ranges between 125-135 degrees Celsius. Its acid value is less than 30 mg of potassium hydroxide per gram. view less | |
| Tertac TT 132 | Respol Resinas | Tertac TT 132 is a fumaric resin esterified adduct that can be used in offset inks, news inks, and lithographic inks. This product is a low viscosity modified rosin resin. Its cloud point ranges between 55-70 degrees Celsius, and its softening point ran...view more Tertac TT 132 is a fumaric resin esterified adduct that can be used in offset inks, news inks, and lithographic inks. This product is a low viscosity modified rosin resin. Its cloud point ranges between 55-70 degrees Celsius, and its softening point ranges between 110-125 degrees Celsius. Its acid value is less than 30 mg of potassium hydroxide per gram. view less | |
| Tertac TT 140 | Respol Resinas | Tertac TT 140 is a maleic resin that can be used in coatings and oleoresinous varnishes. This product is soluble in drying oils and confers hardness, colour stability, and fast drying to the end product. Its softening point ranges between 135-145 degree...view more Tertac TT 140 is a maleic resin that can be used in coatings and oleoresinous varnishes. This product is soluble in drying oils and confers hardness, colour stability, and fast drying to the end product. Its softening point ranges between 135-145 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
| Tertac TT 150 | Respol Resinas | Tertac TT 150 is a fumaric resin esterified adduct that can be used in oleoresinous varnishes and lithographic inks. This product confers hardness, colour stability, and faster drying in the end product. Its softening point ranges between 145-155 degree...view more Tertac TT 150 is a fumaric resin esterified adduct that can be used in oleoresinous varnishes and lithographic inks. This product confers hardness, colour stability, and faster drying in the end product. Its softening point ranges between 145-155 degrees Celsius and its acid value is less than 16 mg of potassium hydroxide per gram. view less | |
| Tertac TT 160 | Respol Resinas | Tertac TT 160 is a fumaric resin esterified adduct that can be used in overprinting varnishes, lithographic inks, offset printing inks, and as a paint modifier. This product provides high gloss, colour stability, fast drying and hardness to the end produ...view more Tertac TT 160 is a fumaric resin esterified adduct that can be used in overprinting varnishes, lithographic inks, offset printing inks, and as a paint modifier. This product provides high gloss, colour stability, fast drying and hardness to the end product. Its cloud point ranges between 50-60 degrees Celsius and its softening point ranges between 150-160 degrees Celsius. Its acid value is less than 25 mg of potassium hydroxide per gram. view less | |
| Tertac TT 170 | Respol Resinas | Tertac TT 170 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a maleic modified rosin ester that promotes faster drying, hardness, gloss, and colour stability to overprinting varnishes and...view more Tertac TT 170 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a maleic modified rosin ester that promotes faster drying, hardness, gloss, and colour stability to overprinting varnishes and offset printing inks. Its cloud point ranges between 60-80 degrees Celsius and it contains 35% solids. view less | |
| Tertac TT 172 | Respol Resinas | Tertac TT 172 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a maleic modified rosin ester that promotes faster drying, hardness, gloss, and colour stability to overprinting varnishes and...view more Tertac TT 172 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a maleic modified rosin ester that promotes faster drying, hardness, gloss, and colour stability to overprinting varnishes and offset printing inks. Its cloud point ranges between 65-80 degrees Celsius and it contains 40% solids. view less | |
| Tertac TT 730 | Respol Resinas | Tertac TT 730 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a maleic modified rosin ester that promotes faster drying, hardness, gloss, and colour stability to overprinting varnishes and...view more Tertac TT 730 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a maleic modified rosin ester that promotes faster drying, hardness, gloss, and colour stability to overprinting varnishes and offset printing inks. Its cloud point ranges between 110-120 degrees Celsius and it contains 35% solids. view less | |
| Tertac TT N320 | Respol Resinas | Tertac TT N320 is a maleic resin that can be used in nitrocellulose varnishes and oleoresinous varnishes. This product improves gloss, colour retention, and adhesion in the end product. Its softening point ranges between 115-125 degrees Celsius and its ...view more Tertac TT N320 is a maleic resin that can be used in nitrocellulose varnishes and oleoresinous varnishes. This product improves gloss, colour retention, and adhesion in the end product. Its softening point ranges between 115-125 degrees Celsius and its acid value is less than 30 mg of potassium hydroxide per gram. view less | |
| Tertac TT N340 | Respol Resinas | Tertac TT N340 is a maleic resin that can be used in nitrocellulose varnishes. This product improves gloss, colour retention, adhesion and hardness sanding properties in the end product. Its softening point ranges between 130-140 degrees Celsius and its...view more Tertac TT N340 is a maleic resin that can be used in nitrocellulose varnishes. This product improves gloss, colour retention, adhesion and hardness sanding properties in the end product. Its softening point ranges between 130-140 degrees Celsius and its acid value is less than 35 mg of potassium hydroxide per gram. view less | |
| Tertac TT ND1752 | Respol Resinas | Tertac TT ND1752 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a high molecular weight maleic modified rosin ester with good solubility in vegetable oils. It confers hardness, gloss, an...view more Tertac TT ND1752 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product is a high molecular weight maleic modified rosin ester with good solubility in vegetable oils. It confers hardness, gloss, and colour stability to inks and varnishes. Its cloud point ranges between 50-70 degrees Celsius and it contains 40% solids. view less | |
| Tertac TT ND2198 | Respol Resinas | Tertac TT ND2198 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product has a low polarity and low softening point with medium solubility in mineral oils. Its cloud point ranges between 50-70 degre...view more Tertac TT ND2198 is a phenol formaldehyde-free rosin ester that can be used in offset printing inks and varnishes. This product has a low polarity and low softening point with medium solubility in mineral oils. Its cloud point ranges between 50-70 degrees Celsius and it contains 45% solids. view less | |
| Thickener NL | Ichemco | Thickener NL is a water-based vinylpyrrolidone copolymer. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 60-100 mPa.s. Thickener NL is most commonly used as a thickening agent in latex coating applications. | |
| Thickener PU 3 | Ichemco | Thickener PU 3 is a sodium polyacrylate thickener. This product has a Brookfield viscosity at 25°C of 23,000-33,000 mPa.s. Thickener PU 3 is most commonly used as a thickening agent in synthetic latex paint formulation applications. | |
| Thickener SL 6103 | Ichemco | Thickener SL 6103 is a stable, waterborne emulsion of a light molecular weight acrylic polymer in a milky white liquid form. This product has a total solids content of 27.5-28.5%. Thickener SL 6103 is most commonly used as a thickening agent in latex coat...view more Thickener SL 6103 is a stable, waterborne emulsion of a light molecular weight acrylic polymer in a milky white liquid form. This product has a total solids content of 27.5-28.5%. Thickener SL 6103 is most commonly used as a thickening agent in latex coating applications. view less | |
| TKA-396 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environmen...view more TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environment. It finds application in alcohol soluble inks, coatings, and adhesives. view less | |
| TKB-1C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-1C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a blue-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings,...view more TKB-1C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a blue-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-1D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-1D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a blue-green color. It has a particle size of 15 to 40 micrometers and finds application in coatings,...view more TKB-1D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a blue-green color. It has a particle size of 15 to 40 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-3C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-3C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 55 to 75 micrometers and finds application...view more TKB-3C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-3D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-3D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 15 to 45 micrometers and finds application...view more TKB-3D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 15 to 45 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4A | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 0.5 to 2 millimeters and finds application...view more TKB-4A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 0.5 to 2 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 65 to 85 micrometers and finds application...view more TKB-4B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 65 to 85 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4BA | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 0.15 to 0.3 millimeters and finds applica...view more TKB-4BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 0.15 to 0.3 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 45 to 55 micrometers and finds application...view more TKB-4C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 45 to 55 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 15 to 35 micrometers and finds application...view more TKB-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 15 to 35 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKBW-4D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKBW-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows in a blue-green color. It has a particle size of 15 to 35 micrometers and finds application in coatings, inks, paints, and p...view more TKBW-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows in a blue-green color. It has a particle size of 15 to 35 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-1C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-1C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds application in coating...view more TKG-1C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-1D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-1D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a yellow-green color. It has a particle size of 15 to 40 micrometers and finds application in coating...view more TKG-1D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a yellow-green color. It has a particle size of 15 to 40 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-2C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-2C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds applicati...view more TKG-2C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-2D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-2D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 15 to 45 micrometers and finds applicati...view more TKG-2D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 15 to 45 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-2EW | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-2EW is a photoluminescent pigment manufactured with TK pigments through a coating process. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 5 to 15 micrometers and fi...view more TKG-2EW is a photoluminescent pigment manufactured with TK pigments through a coating process. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 5 to 15 micrometers and finds application in water-based paints and inks. view less | |
| TKG-4A | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.5 to 2 millimeters and finds applicati...view more TKG-4A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.5 to 2 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 65 to 85 micrometers and finds applicati...view more TKG-4B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 65 to 85 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4BA | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.15 to 0.3 millimeters and finds appli...view more TKG-4BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.15 to 0.3 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 45 to 55 micrometers and finds applicati...view more TKG-4C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 45 to 55 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 25 to 35 micrometers and finds applicati...view more TKG-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 25 to 35 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4E | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4E is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 5 to 15 micrometers and finds applicatio...view more TKG-4E is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 5 to 15 micrometers and finds application in coatings, inks, paints, and printing pastes. view less |
