| Atresal C 144/70 D4 | Atcoat GmbH | Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty aci...view more Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 144/70 D4 has an oil length of 62, a solid of 70%, and a viscosity of 4200 to 5200 mPas. view less | |
| Atresal C 25/60 SN | Atcoat GmbH | Atresal C 25/60 SN is short oil alkyd resin, consisting of high quality fatty acid and whit spirit, suitable for the formulation of filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materia...view more Atresal C 25/60 SN is short oil alkyd resin, consisting of high quality fatty acid and whit spirit, suitable for the formulation of filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 25/60 SN has an oil length of 29 a solid of 60%, and a viscosity of 110 to 150 sec. view less | |
| Atresal C 32/75 BA | Atcoat GmbH | Atresal C 32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for 2K coatings, NC coatings, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquer wit...view more Atresal C 32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for 2K coatings, NC coatings, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 32/75 BA has an oil length of 32 a solid of 75%, and a viscosity of 20 to 35 s (50% DIN4). view less | |
| Atresal C 35/50 D6 | Atcoat GmbH | Atresal C 35/50 D6 is medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for fast drying primer with good polish-ability, and in combination with long oil alkyds for satin gloss paints with good spread-ability. A...view more Atresal C 35/50 D6 is medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for fast drying primer with good polish-ability, and in combination with long oil alkyds for satin gloss paints with good spread-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 35/50 D6 has an oil length of 53, a solid of 50%, and a viscosity of 12000 to 16000 mPas. view less | |
| Atresal C 35/50 IP | Atcoat GmbH | Atresal C 35/50 IP is medium oil alkyd resin, consisting of high quality fatty acid and isoparaffin, suitable for fast drying primer with good polish-ability, and in combination with long oil alkyds for satin gloss paints with good spread-ability. Atcoat ...view more Atresal C 35/50 IP is medium oil alkyd resin, consisting of high quality fatty acid and isoparaffin, suitable for fast drying primer with good polish-ability, and in combination with long oil alkyds for satin gloss paints with good spread-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 35/50 IP has an oil length of 53, a solid of 50%, and a viscosity of 5000 to 6500 mPas. view less | |
| Atresal C 37/50 D4 | Atcoat GmbH | Atresal C 37/50 D4 is medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for fast drying radiator and primer paints with good drying and good polish-ability. Atcoat alkyd resins are based on natural raw materials...view more Atresal C 37/50 D4 is medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for fast drying radiator and primer paints with good drying and good polish-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 37/50 D4 has an oil length of 53, a solid of 50%, and a viscosity of 220 to 260 s(DIN6). view less | |
| Atresal C 44/60 KY | Atcoat GmbH | Atresal C 44/60 KY is a styrene modified alkyd resin, consisting of high quality fatty acid and white spirit, suitable for zinc-based primer, anti-rust primer, and fast drying primer with good adhesion. Atcoat alkyd resins are based on natural raw materia...view more Atresal C 44/60 KY is a styrene modified alkyd resin, consisting of high quality fatty acid and white spirit, suitable for zinc-based primer, anti-rust primer, and fast drying primer with good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 44/60 KY has an oil length of 40, a solid of 60%, and a viscosity of 75 to 100 sec (50% DIN4). view less | |
| Atresal F 26/60 X | Atcoat GmbH | Atresal F 26/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for the formulation of fast drying filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw m...view more Atresal F 26/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for the formulation of fast drying filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal F 26/60 X has an oil length of 27 a solid of 60%, and a viscosity of 90 to 120 s (50% DIN4). view less | |
| Atresal K1297/65 X | Atcoat GmbH | Atresal K1297/65 X is short oil alkyd resin, consisting of soya and xylene, suitable for air drying top coatings with high durability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1297/65 X has an oi...view more Atresal K1297/65 X is short oil alkyd resin, consisting of soya and xylene, suitable for air drying top coatings with high durability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1297/65 X has an oil length of 39 a solid of 65%, and a viscosity of 3000 to 4000 mPas. view less | |
| Atresal K280/60 X | Atcoat GmbH | Atresal K280/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for primers and top coats with oven and air drying; it is also compatible with PVC copolymer. Atcoat alkyd resins are based on natural raw materials lik...view more Atresal K280/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for primers and top coats with oven and air drying; it is also compatible with PVC copolymer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K280/60 X has an oil length of 28 a solid of 60%, and a viscosity of 90 to 110 sec. view less | |
| Atresal K2851/55 K2 | Atcoat GmbH | Atresal K2851/55 K2 is short oil alkyd resin, consisting of talloil, tung, and white spirit, suitable for the production of primers, fillers, oven and air drying putties, and has good adhesion strength on steel. Atcoat alkyd resins are based on natural ra...view more Atresal K2851/55 K2 is short oil alkyd resin, consisting of talloil, tung, and white spirit, suitable for the production of primers, fillers, oven and air drying putties, and has good adhesion strength on steel. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K2851/55 K2 has an oil length of 40, a solid of 55%, and a viscosity of 90 to 130 sec. view less | |
| Atresal K29/60 X | Atcoat GmbH | Atresal K29/60 X is short oil alkyd resin, consisting of dehydrated castor oil and xylene, suitable for machine paints, stove drying lacquers and primers, car repair lacquers, highly reactive resin, and NC and AC coatings. Atcoat alkyd resins are based on...view more Atresal K29/60 X is short oil alkyd resin, consisting of dehydrated castor oil and xylene, suitable for machine paints, stove drying lacquers and primers, car repair lacquers, highly reactive resin, and NC and AC coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K29/60 X has an oil length of 29 a solid of 60%, and a viscosity of 65 to 80 sec. view less | |
| Atresal K30/60 X | Atcoat GmbH | Atresal K30/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for the production of top coats, one coat, primers, and dipping paints with through drying and good surface. Atcoat alkyd resins are based on natural raw...view more Atresal K30/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for the production of top coats, one coat, primers, and dipping paints with through drying and good surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K30/60 X has an oil length of 30 a solid of 60%, and a viscosity of 65 to 85 sec. view less | |
| Atresal K32/75 BA | Atcoat GmbH | Atresal K32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of top coats, one coat, primers, and dipping paints with good drying. Atcoat alkyd resins are based on natural raw materials lik...view more Atresal K32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of top coats, one coat, primers, and dipping paints with good drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K32/75 BA has an oil length of 32 a solid of 75%, and a viscosity of 100 to 130 dPas. view less | |
| Atresal K370/60 X | Atcoat GmbH | Atresal K370/60 X is short oil alkyd resin, consisting of linseed, talloil, and xylene, suitable for fillers and primers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K370/60 X has an oil length of 36...view more Atresal K370/60 X is short oil alkyd resin, consisting of linseed, talloil, and xylene, suitable for fillers and primers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K370/60 X has an oil length of 36 a solid of 60%, and a viscosity of 150 to 190 sec. view less | |
| Atresal K381/50 K2 | Atcoat GmbH | Atresal K381/50 K2 is short oil alkyd resin, consisting of vegetable oil and white spirit, suitable for corrosion resistant fillers, primers, putties that is flexible, fast drying, and stable on storage with alkaline pigments. Atcoat alkyd resins are base...view more Atresal K381/50 K2 is short oil alkyd resin, consisting of vegetable oil and white spirit, suitable for corrosion resistant fillers, primers, putties that is flexible, fast drying, and stable on storage with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K381/50 K2 has an oil length of 38, a solid of 50%, and a viscosity of 70 to 110 sec. view less | |
| Atresal K381/60 X | Atcoat GmbH | Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based o...view more Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K381/60 X has an oil length of 38 a solid of 60%, and a viscosity of 120 to 170 sec. view less | |
| Atresal M41/50 K3 | Atcoat GmbH | Atresal M41/50 K3 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of forced drying and air drying primers and lacquers that is color stable, high flexibility, and high gloss. Atcoat alkyd resi...view more Atresal M41/50 K3 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of forced drying and air drying primers and lacquers that is color stable, high flexibility, and high gloss. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M41/50 K3 has an oil length of 41, a solid of 50%, and a viscosity of 140 to 180 sec. view less | |
| Atresal SO 32/60 X | Atcoat GmbH | Atresal SO 32/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for 2K coatings, NC, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquers with low yellowi...view more Atresal SO 32/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for 2K coatings, NC, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquers with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 32/60 X has an oil length of 32 a solid of 60%, and a viscosity of 750 to 1200 mPas (50°C). view less | |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...view more BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. view less | |
| CHS-Alkyd AL 2900 | Spolchemie | CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd ...view more CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd AL 2900 is primarily used for fast drying high performance topcoats and industrial primers. view less | |
| CHS-Alkyd AL 3961 | Spolchemie | CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...view more CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. view less | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...view more CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. view less | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...view more CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. view less | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...view more CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. view less | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...view more CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. view less | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...view more CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. view less | |
| Coronate® 1130 | Tosoh Corporation | Coronate® 1130, in the form of a brownish liquid, contains polymerized-MDI and pure-MDI. It is applicable in elastomers, adhesives, and coatings and is largely used in spray foam applications. | |
| Crestakyd® 10-1019 | Scott Bader | Crestakyd® 10-1019 is a top quality gloss paints for both decorative and marine applications. | |
| Crestakyd® 10-1022 | Scott Bader | Crestakyd® 10-1022 is a standard top quality alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-1025 | Scott Bader | Crestakyd® 10-1025 is used for economical gloss paints and primers. | |
| Crestakyd® 10-1066 | Scott Bader | Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats,...view more Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes. view less | |
| Crestakyd® 10-2020 | Scott Bader | Crestakyd® 10-2020 is a standard long oil alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2033 | Scott Bader | Crestakyd® 10-2033 is a fast drying alkyd with good flow characteristics. | |
| Crestakyd® 10-2505 | Scott Bader | Crestakyd® 10-2505 is suitable for high solids decorative paints and lacquers with excellent durability. | |
| Crestakyd® 10-3507 | Scott Bader | Crestakyd® 10-3507 is a top quality alkyd for use in decorative gloss paints and varnishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| Disvalkyd-509 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-509 is an alkyd resin made with long oils. This product derives from linseed oil. It can be used in primers, undercoats, decorative enamels, and architectural finishes. | |
| Disvalkyd-519 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-519 is an alkyd resin made from long oils. This product derives from diluted crude oil. It can be used in primers, undercoats, decorative enamels, and architectural finishes. | |
| Disvalkyd-543 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-543 is a modified alkyd resin. This product is made with linseed oils and penta polyols. It can be used in primers and industrial finishes. | |
| Disvalkyd-544 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in stoving enamels, and nitrocellulose paints, primers, and putty. | |
| Disvalkyd-545 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-545 is a modified alkyd resin. This product derives from diluted crude oil and penta polyols. It can be used in economical air-drying paints, primers and undercoatings. | |
| Disvalkyd-553 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-553 is an alkyd resin made with medium-length oils. This product uses a mixture of oils and mixed polyols. It can be used in air-drying enamels, primers, and specially-stoved enamels. | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Docure KH-240 | Kukdo Chemical Co., Ltd. | Docure KH-240 is a polyamine modified curing agent and is used for general adhesives. KH-240 has a good flexibility and adhesion strength. It is well suited for use in the production of primers and maintenance coatings. | |
| Domide GX-328K | Kukdo Chemical Co., Ltd. | Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...view more Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. view less | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...view more Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. view less | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...view more Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. view less | |
| Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
| EPOCROS™ K-2010E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & hea...view more EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and a controllable appearance by glass transition temperature adjustment. It also offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. EPOCROS™ K-2010E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| EPOCROS™ K-2020E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-12...view more EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers film properties, low toxicity, fast drying along with improved water- and heat resistance. It possesses a controllable appearance by adjusting glass transition temperature. It has a long pot life for one packaging. It shows excellent adhesion particularly to polyester such as PET. Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| EPOCROS™ K-2035E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat ...view more EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and controllable appearance by glass transition temperature adjustment. It offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It has a long pot life for one packaging. EPOCROS™ K-2035E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| Epokukdo KEM-101-50 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-101-50 is an aqueous epoxy resin emulsion based on conventional solid epoxy resin. KEM-101-50 cured in combination with water dispersible hardener, Docure KH-700, exhibits especially good adhesion to most substrates and has good physical prop...view more Epokukdo KEM-101-50 is an aqueous epoxy resin emulsion based on conventional solid epoxy resin. KEM-101-50 cured in combination with water dispersible hardener, Docure KH-700, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance. KEM-101-50/Docure KH-700 waterborne system has been used in primer and top coating areas. view less | |
| Epokukdo YD-011S | Kukdo Chemical Co., Ltd. | Epokukdo YD-011S is a low molecular weight solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. YD-011S is used for various applications in both structure and surface-coating such as primer, top coating, anti-corrosive coating, marine paint,...view more Epokukdo YD-011S is a low molecular weight solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. YD-011S is used for various applications in both structure and surface-coating such as primer, top coating, anti-corrosive coating, marine paint, heavy duty coating, filament winding, laminating, various composite application and so forth. view less | |
| EPOSIR® 7161 | SIR Industriale SpA | EPOSIR® 7161 is a standard BPA based Type-1 solid epoxy resin. It has a low molecular weight and provides heavy duty protection. This product is well suited for use in anti-corrosive coatings, primers, stoving, and enamels. | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| Glycerol Ester of Gum Rosin G-85 | Ecopower Chemical Co., Ltd. | Glycerol Ester of Gum Rosin G-85 is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives. | |
| Glycerol Ester of Gum Rosin G-90 | Ecopower Chemical Co., Ltd. | Glycerol Ester of Gum Rosin G-90 is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives. | |
| Glycerol Ester of Gum Rosin G-90L | Ecopower Chemical Co., Ltd. | Glycerol Ester of Gum Rosin G-90L is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives. | |
| HC9-110 | Ecopower Chemical Co., Ltd. | HC9-110 is a C9 petroleum hydrocarbon resin that can be used to improve paints, coatings, printing inks, and adhesives. | |
| HC9-120 | Ecopower Chemical Co., Ltd. | HC9-120 is a C9 petroleum hydrocarbon resins that can be used in paints, adhesives, pressure sensitive tapes, and printing inks. | |
| HS23-60 | Tianyi Chemical Engineering Material Co., Ltd. | HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-re...view more HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-resistant characteristics. The end product will dry easily with a light-colored finish. view less | |
| HS9301 | Tianyi Chemical Engineering Material Co., Ltd. | HS9301, in the form of a transparent resin, is a pure acrylate resin that can be used in vacuum plating surface paints, top coating varnishes, or metal UV paints. This product is soluble in active monomers or inert solvents. | |
| HS9553 | Tianyi Chemical Engineering Material Co., Ltd. | HS9553, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in special material primers and BMC high-temperature resistant coating systems. This product adheres well to its underplating. I...view more HS9553, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in special material primers and BMC high-temperature resistant coating systems. This product adheres well to its underplating. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. view less | |
| HydriCryl 130-S | Hydrite Chemical Co. | HydriCryl 130-S is a high viscosity, high molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132 | Hydrite Chemical Co. | HydriCryl 132 is a gloss, block, transfer, and resolubility modifier. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132HV | Hydrite Chemical Co. | HydriCryl 132HV is a high viscosity mid range molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 345 | Hydrite Chemical Co. | HydriCryl 345 is a low molecular weight solution resin for enhancing gloss in coatings and overprint varnishes. | |
| HydriCryl 410 | Hydrite Chemical Co. | HydriCryl 410 is an emulsion polymer optimized for high pigment load dispersion applications. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 430 | Hydrite Chemical Co. | HydriCryl 430 is a high gloss polymer with good resolubility and transfer when used in neutral pH systems. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 460 | Hydrite Chemical Co. | HydriCryl 460 is a emulsion polymer that displays maximum pigment wetting and high pigment loads at stable low viscosity. This product is well suited for use in water-based inks and coatings. | |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | Request Sample |
| Kemapox® RL 214 | CTP Egypt S.A.E. CTP Original | Kemapox® RL 214 is a modified Bisphenol-A epoxy resin that is solvent-free and has low viscosity. This product is designed for primers, self-leveling flooring applications, and coatings. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 800 mPas a...view more Kemapox® RL 214 is a modified Bisphenol-A epoxy resin that is solvent-free and has low viscosity. This product is designed for primers, self-leveling flooring applications, and coatings. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 800 mPas at 23°C. view less | |
| Kemapox® RL 216 | CTP Egypt S.A.E. CTP Original | Kemapox® RL 216 is a modified epoxy resin that has low viscosity. This product should be used for primer and coating systems and is used with water dilutable epoxy systems. It has a density of 1.11 g/cm3 at 23°C and a viscosity of 1000 mPas at 23°C. | |
| Kingcure M-510 | Sanho Chemical Co., Ltd. | Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...view more Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. view less | |
| Kingcure M-510BS | Sanho Chemical Co., Ltd. | Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...view more Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. view less | |
| Kingcure M-530 | Sanho Chemical Co., Ltd. | Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...view more Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. view less | |
| Kingmide 150-50 | Sanho Chemical Co., Ltd. | Kingmide 150-50 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 150-50 is most commonly used in primer coating formulation applications. | |
| Kingmide 305-31 | Sanho Chemical Co., Ltd. | Kingmide 305-31 is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-31MI | Sanho Chemical Co., Ltd. | Kingmide 305-31MI is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31MI is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-50 | Sanho Chemical Co., Ltd. | Kingmide 305-50 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 305-50 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-60 | Sanho Chemical Co., Ltd. | Kingmide 305-60 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 305-60 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70 | Sanho Chemical Co., Ltd. | Kingmide 305-70 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70X | Sanho Chemical Co., Ltd. | Kingmide 305-70X is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70X is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 315-80 | Sanho Chemical Co., Ltd. | Kingmide 315-80 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 78-82%. Kingmide 315-80 is most commonly used in heavy-duty primer coating formulation applications. | |
| Lucidene 202 | Hydrite Chemical Co. | Lucidene 202 is a water-based styrene/acrylic copolymer designed for use with metallic pigments. This product is well suited for use in water-based inks and coatings. | |
| Lucidene 243 | Hydrite Chemical Co. | Lucidene 243 is a fast-drying emulsion with good grease resistance, making it ideal for use in ink and primer applications. | |
| Lucidene 605 NV | Hydrite Chemical Co. | Lucidene 605 NV is an emulsion that displays outstanding adhesion, water resistance, and low VOC content. This product is well suited for use in water-based inks and coatings. | |
| Lucidene 645 | Hydrite Chemical Co. | Lucidene 645 is an acrylic/urethane emulsion featuring high gloss and good alkaline and detergent resistance. This product is well suited for use in water-based inks and coatings. | |
| Makrovil PAC 617 | Indulor Chemie GmbH | Makrovil PAC 617 is an acrylic polymer emulsion. It is a binder with excellent penetration, very good strengthening of substrate, excellent freeze/thaw stability, and is finely dispersed. Makrovil PAC 617 is used in water-based sealing primers. | |
| Maleic Acid Resin M-120 | Ecopower Chemical Co., Ltd. | Maleic Acid Resin M-120 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints. |
