| 15% POTASSIUM HEX-CEM | OMG Borchers GmbH | 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is...view more 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is also capable of stabilizing the rheological and the pot life behaviour of waterborne 2-components PUR systems, and it can positively affect the haze-values of these paint systems. view less | |
| 21% COBALT HYDROXY TEN-CEM | OMG Borchers GmbH | 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, ...view more 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint. view less | |
| Additive OF | OMG Borchers GmbH | Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally co...view more Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally compatible with polyol and isocyanate products. However, storage stability is not assured in all combinations. Its suitability for individual applications must be tested carefully. It is suitable for solventborne polyurethane coatings and can be added both to the polyol component and to the isocyanate component. view less | |
| Additive TI | OMG Borchers GmbH | Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI ...view more Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI is used for dehydration of solvents, fillers, pigments and bituminous tars. It rapidly reacts with water and generates carbon dioxide and toluenesulfonamide which is generally inert towards further reaction with alkyl and aryl isocyanates, and is usually soluble in common coating solvents. This product does not cause further film yellowing. Application of Additive TI in a polyurethane coating formulation, prevents moisture-related problems such as gloss reduction, haze, yellowing and reaction foam. It can also react with other active hydrogen compounds, such as alcohols, phenols, amines, amides and so on. This product eliminates moisture introduced with solvents, pigments, and fillers in 1-component as well as in classical 2-component PU systems. view less | |
| Ascinin® Anti Skin 0444 | OMG Borchers GmbH | Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special...view more Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special combination of active ingredients with a high anti-oxidative potential. This product contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. Due to the chemical basis of Ascinin® Anti Skin 0444 the specific disadvantages of other antioxidants -such as the strong drying retardation of phenolics or the toxicologic potential of oximic compounds - could be avoided. Ascinin® Anti Skin 0444 contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is suitable for all solventborne and solvent-free oxidatively drying coatings. It might be used in clear-coats as well as in pigmented systems. This product is solved in a non-VOC solvent, so it contains a very low VOC portion and is of low odour. Hence it is especially recommendable for VOC-reduced coatings, High-Solids-paints, printing inks and for use in environmentally friendly coatings. view less | |
| Ascinin® Anti Skin 0445 | OMG Borchers GmbH | Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and...view more Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is a clear, low viscous, colorless to yellowish liquid. This product is solved in a high flashpoint alcoholic solvent. It is suitable for common solventborne coatings as well as for polar and waterborne formulations. Ascinin® Anti Skin 0445 might be used in clearcoats as well as in pigmented systems. view less | |
| Ascinin® P | OMG Borchers GmbH | Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting duri...view more Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting during over-coating. In baking paints, it eliminates surface defects. This product's active substance is not very volatile, so it counteracts wrinkling even in baking paints based, for examply, on ricin alkyds. view less | |
| Ascinin® Special | OMG Borchers GmbH | Ascinin® Special is a mixture of a substituted phenol and a volatile oxime in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented paints based on drying oils or alkyd resins. This product is easy to use and exhibits good bind...view more Ascinin® Special is a mixture of a substituted phenol and a volatile oxime in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented paints based on drying oils or alkyd resins. This product is easy to use and exhibits good binder compatibility. view less | |
| Aspanger ASPOLIT F100 | Aspanger | Aspanger ASPOLIT F100, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...view more Aspanger ASPOLIT F100, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F100 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F100 has a Spec. surface (m²/g) of 4.5, an a oil absorption (g/100 g) of 21, and a loose bulk density (g/l) of 630. view less | |
| Aspanger ASPOLIT F30 | Aspanger | Aspanger ASPOLIT F30, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...view more Aspanger ASPOLIT F30, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F30 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F30 has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 400. view less | |
| Aspanger ASPOLIT F40 | Aspanger | Aspanger ASPOLIT F40, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...view more Aspanger ASPOLIT F40, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F40 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F40 has a Spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 35, and a loose bulk density (g/l) of 450. view less | |
| Aspanger ASPOLIT F70 | Aspanger | Aspanger ASPOLIT F70, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...view more Aspanger ASPOLIT F70, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F70 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F70 has a Spec. surface (m²/g) of 6, an a oil absorption (g/100 g) of 27, and a loose bulk density (g/l) of 540. view less | |
| Aspanger ASPOLIT G200 | Aspanger | Aspanger ASPOLIT G200, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...view more Aspanger ASPOLIT G200, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT G200 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT G200 has a Spec. surface (m²/g) of 3, an a oil absorption (g/100 g) of 16, and a loose bulk density (g/l) of 740. view less | |
| Aspanger ASPOLIT G400 | Aspanger | Aspanger ASPOLIT G400, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...view more Aspanger ASPOLIT G400, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT G400 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT G400 has a spec. surface (m²/g) of 1-2, an a oil absorption (g/100 g) of 12, and a loose bulk density (g/l) of 885. view less | |
| Aspanger Mica 900 | Aspanger | Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves ma...view more Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica 900 has a loose bulk density (g/l) of 350. view less | |
| Aspanger Mica F | Aspanger | Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F impro...view more Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica F has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 34, and a loose bulk density (g/l) of 440. view less | |
| Aspanger Mica G | Aspanger | Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G impro...view more Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica G has a spec. surface (m²/g) of 8, an a oil absorption (g/100 g) of 28, and a loose bulk density (g/l) of 490. view less | |
| Aspanger Mica N | Aspanger | Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N impro...view more Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica N has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 31, and a loose bulk density (g/l) of 460. view less | |
| Aspanger Mica SFG20 | Aspanger | Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG2...view more Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG20 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG20 has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 41, and a loose bulk density (g/l) of 370. view less | |
| Aspanger Mica SFG40 | Aspanger | Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...view more Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG40 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG40 has a spec. surface (m²/g) of 17, an a oil absorption (g/100 g) of 42, and a loose bulk density (g/l) of 290. view less | |
| Aspanger Mica SFG70 | Aspanger | Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...view more Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG70 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG70 has a spec. surface (m²/g) of 21, an a oil absorption (g/100 g) of 43, and a loose bulk density (g/l) of 200. view less | |
| Aspanger Mica SG | Aspanger | Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG imp...view more Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SG has a spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 25, and a loose bulk density (g/l) of 500. view less | |
| Aspanger Mica TF | Aspanger | Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves mate...view more Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TF has a Spec. surface (m²/g) of 9.5, an a oil absorption (g/100 g) of 52, and a loose bulk density (g/l) of 370. view less | |
| Aspanger Mica TG | Aspanger | Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves mate...view more Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TG has a spec. surface (m²/g) of 4.0, an a oil absorption (g/100 g) of 46, and a loose bulk density (g/l) of 350. view less | |
| Aspanger Mica TM | Aspanger | Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves mate...view more Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TM has a spec. surface (m²/g) of 5.5, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 360. view less | |
| Aspanger Mica TX | Aspanger | Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves mate...view more Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TX has a spec. surface (m²/g) of 1.2 and a loose bulk density (g/l) of 320. view less | |
| Aspanger Mica TXL | Aspanger | Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves ma...view more Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TXL has a spec. surface (m²/g) of 3.3 and a loose bulk density (g/l) of 330. view less | |
| Bayoxide® Z active | OMG Borchers GmbH | Bayoxide® Z active is a zinc oxide that is obtained by precipitation. It is highly dispersed and extremely reactive. Because of its microscopic structure, this substance is an interesting additive for the coatings sector. It is used as a raw material for ...view more Bayoxide® Z active is a zinc oxide that is obtained by precipitation. It is highly dispersed and extremely reactive. Because of its microscopic structure, this substance is an interesting additive for the coatings sector. It is used as a raw material for coatings based on binders which are compatible with zinc oxide. view less | |
| Borchers® AF 0670 | OMG Borchers GmbH | Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during produ...view more Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during production/application of water based paints and coatings, inks and adhesives. view less | |
| Borchers® AF 0871 | OMG Borchers GmbH | Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable ...view more Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable with water and efficient in most polymer dispersions. It is particularly suitable for highly filled pigmented systems and pigment pastes grinding. The efficiency is independent of the curing mechanism. Borchers® AF 0871 increases density during manufacturing process and application. It provides homogenous film built after application. It has been designed for use in water based emulsions and water-thinnable systems. The efficiency is proven in chemically curing systems based on polyurethanes (including acrylate modification) and acrylates (also hydroxyl bearing polyacrylates). view less | |
| Borchers® AF 1171 | OMG Borchers GmbH | Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This ...view more Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This product improves the film gloss, substrate wetting, colour strength in pigmented systems and avoids microfoam formation. It is easily emulsified in water and easy to incorporate. Borchers® AF 1171 is characterized by good binder compatibility and needs little shear force to incorporate. view less | |
| Borchers® AF 1270 | OMG Borchers GmbH | Borchers® AF 1270 is a solution of fluorinated, organo-modified polysiloxanes as active ingredients, which are highly efficient and compatible defoamer/air release agents with anti-cratering properties. This product is a highly active silicone based foam ...view more Borchers® AF 1270 is a solution of fluorinated, organo-modified polysiloxanes as active ingredients, which are highly efficient and compatible defoamer/air release agents with anti-cratering properties. This product is a highly active silicone based foam control agent with air release property. It can be used in clear and pigmented solvent based systems. view less | |
| Borchers® AF T | OMG Borchers GmbH | Borchers® AF T is a highly effective silicone-free defoamer for emulsion paints, paper coatings, glues, adhesives, textile auxiliaries and concrete additives. It both destroys foam and prevents its formulation. | |
| Borchers® Deca Barium 12.5 | OMG Borchers GmbH | Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extend...view more Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extenders in solvent based coatings systems. It improves gloss and prevents adsorption of the primary driers by pigments and extenders thereby increasing coating stability during prolonged storage. In combination with Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese, barium has a similar effect to that of lead and will promote through drying in many formulations. Borchers® Deca Barium 12.5 is used in solventborne systems based on alkyds and epoxy esters that crosslink by oxidation. view less | |
| Borchers® Deca Cobalt 10 | OMG Borchers GmbH | Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems,...view more Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems, whether air-or forced-drying. It is used in architectural paints, industrial coatings, stains, varnishes, oil-based inks and artists' colors. Cobalt catalyses redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides up to a change in valency from Co2+ to Co3+. Borchers® Deca Cobalt 10 thus results in rapid surface drying. A surplus of cobalt may result in defects such as wrinkling, poor through-drying and yellowing. view less | |
| Borchers® Deca Cobalt 12 | OMG Borchers GmbH | Borchers® Deca Cobalt 12 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. It is used in solventborne systems. Cobalt cat...view more Borchers® Deca Cobalt 12 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. It is used in solventborne systems. Cobalt catalyses redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides up to a change in valency from Co2+ to Co3+. It is used in architectural paints, industrial coatings, stains, varnishes, oil-based inks and artists' colors. A surplus of cobalt may result in defects such as wrinkling, poor through-drying and yellowing. view less | |
| Borchers® Deca Cobalt 12 (xylene) | OMG Borchers GmbH | Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. ...view more Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. view less | |
| Borchers® Deca Cobalt 6 HS | OMG Borchers GmbH | Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borch...view more Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. view less | |
| Borchers® Deca Manganese 8 | OMG Borchers GmbH | Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combin...view more Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Borchers® Deca Manganese 8 HS | OMG Borchers GmbH | Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in com...view more Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Borchers® Deca Zirconium 15 | OMG Borchers GmbH | Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for ...view more Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in solventborne systems. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. view less | |
| Borchers® Deca Zirconium 15 HS | OMG Borchers GmbH | Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended f...view more Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in VOC-reduced and High-Solid coatings. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. view less | |
| Borchers® Dry 0133 | OMG Borchers GmbH | Borchers® Dry 0133 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerat...view more Borchers® Dry 0133 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used either in clearcoats or pigmented coating systems. Here it replaces other primary driers, especially cobalt siccatives. It provides rapid surface dry and improves through-drying and hardness of the applied film. view less | |
| Borchers® Dry 0246 | OMG Borchers GmbH | Borchers® Dry 0246 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator...view more Borchers® Dry 0246 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used either in clearcoats or pigmented coating systems. Here it replaces other primary driers, especially cobalt siccatives. It provides rapid surface dry and improves through-drying and hardness of the applied film. view less | |
| Borchers® Dry 0347 Aqua | OMG Borchers GmbH | Borchers® Dry 0347 Aqua is a cobalt-free combination drier based on a highly active synergistic drier association with an organic drying accelerator. It can be used without adding other siccatives or all waterborne oxidatively drying coating systems eit...view more Borchers® Dry 0347 Aqua is a cobalt-free combination drier based on a highly active synergistic drier association with an organic drying accelerator. It can be used without adding other siccatives or all waterborne oxidatively drying coating systems either in clear coats or in pigmented systems. This product aqua can replace other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0410 | OMG Borchers GmbH | Borchers® Dry 0410 is a new cobalt-free primary drier for all conventional oxidatively drying paints. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either ...view more Borchers® Dry 0410 is a new cobalt-free primary drier for all conventional oxidatively drying paints. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either in clearcoats or pigmented coating systems, where it replaces other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0411 HS | OMG Borchers GmbH | Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an orga...view more Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either in clear coats or pigmented coating systems, where it replaces other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0614 Aqua | OMG Borchers GmbH | Borchers® Dry 0614 aqua is a highly reactive cobalt-free primary drier for waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other...view more Borchers® Dry 0614 aqua is a highly reactive cobalt-free primary drier for waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other primary driers, especially cobalt types. view less | |
| Borchers® Dry 0615 Aqua | OMG Borchers GmbH | Borchers® Dry 0615 Aqua is a highly reactive cobalt-free primary drier for low VOC waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may repla...view more Borchers® Dry 0615 Aqua is a highly reactive cobalt-free primary drier for low VOC waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other primary driers, especially cobalt types. view less | |
| Borchers® LH 10 | OMG Borchers GmbH | Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. Thi...view more Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. This product improves the drying of chemically curing systems, such as aqueous two-component polyurethane coatings. At the same time, scratch resistance, hardness and mechanical persistence are positively influenced. In higher concentrations Borchers® LH 10 has a matting effect, and therefore should not be used in high gloss formulations. view less | |
| Borchers® VP 0132 | OMG Borchers GmbH | Borchers® VP 0132 is a new primary drier based on an organically modified Vanadium compound. It is suitable either for clearcoats or for pigmented solventborne oxidatively drying coating systems. Borchers® VP 0132 should replace other established primary ...view more Borchers® VP 0132 is a new primary drier based on an organically modified Vanadium compound. It is suitable either for clearcoats or for pigmented solventborne oxidatively drying coating systems. Borchers® VP 0132 should replace other established primary driers, especially cobalt siccatives. This product provides both rapid surface dry and also good through-drying properties. view less | |
| Borchers® VP 9950 | OMG Borchers GmbH | Borchers® VP 9950 is a new water-soluble Vanadium based drier to be used as a primary drier in waterborne oxidatively drying coatings and as a dampening solution additive in printing ink systems. It can be a replacement for other primary driers, especial...view more Borchers® VP 9950 is a new water-soluble Vanadium based drier to be used as a primary drier in waterborne oxidatively drying coatings and as a dampening solution additive in printing ink systems. It can be a replacement for other primary driers, especially for cobalt siccatives. This product provides fast drying of the film surface of water based coating systems. view less | |
| Borchi® Coll 10 | OMG Borchers GmbH | Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it af...view more Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. Borchi® Coll also improves adhesion to wood, plastic and metal surfaces. It reduces the tendency towards under-rusting as a result of improved film quality and more uniform distribution of barrier properties on the substrate. view less | |
| Borchi® Coll 20 | OMG Borchers GmbH | Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior pain...view more Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior paints based on polymer dispersions, such as copolymers of vinyl acetate, ethylene and vinyl chloride, have been achieved by the addition of Borchi® Coll 20. An addition rate of approximately 5 % increases film hardness and makes the films dirt-repellent. view less | |
| Borchi® Coll 20 M | OMG Borchers GmbH | Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicat...view more Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. It also improves adhesion to wood, plastic and metal surfaces. This product is particularly suitable for use in waterborne isocyanate-modified alkyd resins and accelerates drying of the films. It also improves film strength and final film hardness. This product appears an opalescent turbid liquid view less | |
| Borchi® Coll 30 | OMG Borchers GmbH | Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film ...view more Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film strength and hardness. At addition rates of up to 2 %, hiding power is increased without any adverse effect on gloss. It affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. view less | |
| Borchi® Gel 0434 | OMG Borchers GmbH | Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optima...view more Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optimal viscosity in all waterborne coatings for application by brush or roller, especially under higher-shear conditions (> 1000 s-1). It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0435 | OMG Borchers GmbH | Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. B...view more Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. Borchi® Gel 0435 is characterized by its extraordinary efficacy in most coating systems under high-shear conditions, which makes the product particularly well suited for setting the optimal viscosity in all waterborne coatings for application by roller or brush. It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0620 | OMG Borchers GmbH | Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with bind...view more Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with binder particles and pigments a pronounced shear-thinning flow behavior. This product is suitable as thickening agent for all waterborne systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0621 | OMG Borchers GmbH | Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other compon...view more Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other components of the system a shear-thinning flow behavior. It is well suited as thickening agent for all waterborne painting systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0625 | OMG Borchers GmbH | Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity...view more Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity stability mainly in the range between 1000 s-1 - 10000 s-1. This product is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel 0626 | OMG Borchers GmbH | Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high...view more Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high-shear range (1000 - 10000 s-1). It is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel ALA | OMG Borchers GmbH | Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film...view more Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film structure and minimizes spatter during application of emulsion paints, lacquers and printing inks. The optimization of flow characteristics results in a significant improvement in optical properties, particularly in high gloss emulsion systems. view less | |
| Borchi® Gel D8 | OMG Borchers GmbH | Borchi® Gel D8 offers many advantages, including activating primary driers such as cobalt and manganese, promoting and stabilizing drying, increasing film hardness (through-drying), improved adhesion to different substrates, and improved water resistance ...view more Borchi® Gel D8 offers many advantages, including activating primary driers such as cobalt and manganese, promoting and stabilizing drying, increasing film hardness (through-drying), improved adhesion to different substrates, and improved water resistance and promotes corrosion resistance. It is suited for use as a thickener for solvent-based and solvent-free binders. view less | |
| Borchi® Gel L 75 N | OMG Borchers GmbH | Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of...view more Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of dispersed particles formed as a result of emulsion polymerisation. lt is characterised by good efficiency. lt improves the rheological properties of emulsion paints, making the end-products easier to apply with a roller or a brush despite a considerable increase in viscosity. The product can be combined with other thickeners to achieve special effects. Since it improves the flow properties of emulsion paints, Borchi® Gel L 75 N has proved particularly useful for thickening acrylic gloss paints and anti-corrosion coatings. view less | |
| Borchi® Gel L 76 | OMG Borchers GmbH | Borchi® Gel L 76 is a polyurethane-based, non-ionogenic thickener. lt is supplied as a low-viscosity preparation in water in the form of an emulsion. This product acts as a flow promoter and improves the application properties of emulsion paints and also ...view more Borchi® Gel L 76 is a polyurethane-based, non-ionogenic thickener. lt is supplied as a low-viscosity preparation in water in the form of an emulsion. This product acts as a flow promoter and improves the application properties of emulsion paints and also stabilises aqueous pigmented paints. view less | |
| Borchi® Gel LW 44 | OMG Borchers GmbH | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and c...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less | |
| Borchi® Gel PN | OMG Borchers GmbH | Borchi® Gel PN is an aqueous solution of an organic ammoniacal zirconium compound. Borchi® Gel PN is a thixotropic additive for use in water based coating systems, as well as in solvent-free systems. Borchi® Gel PN can be used in all water based coatin...view more Borchi® Gel PN is an aqueous solution of an organic ammoniacal zirconium compound. Borchi® Gel PN is a thixotropic additive for use in water based coating systems, as well as in solvent-free systems. Borchi® Gel PN can be used in all water based coatings containing hydroxyl and carboxyl groups able for interaction. Borchi® Gel PN works through a reaction of association of the active part of the Zirconium complex with reactive groups on the polymer in emulsion or thickener. view less | |
| Borchi® Gel PW 25 | OMG Borchers GmbH | Borchi® Gel PW 25 is a non-ionic, polyurethane-based thickener dissolved in a 4:6 solution of water / propylene glycol. lt is particularly suitable for increasing the viscosity of ready-mixed textured finishes, decorative and industrial coatings. This pro...view more Borchi® Gel PW 25 is a non-ionic, polyurethane-based thickener dissolved in a 4:6 solution of water / propylene glycol. lt is particularly suitable for increasing the viscosity of ready-mixed textured finishes, decorative and industrial coatings. This product is characterised by exceptionally good thickening properties in most dispersion binders. It has a very high water retention capacity, so the coating can be applied over long periods. view less | |
| Borchi® Gel THIX 921 | OMG Borchers GmbH | Borchi® Gel THIX 921 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), and tin compounds. The product mostly produces depending on the type of binder used and the other components of the system a pronounced shear-thin...view more Borchi® Gel THIX 921 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), and tin compounds. The product mostly produces depending on the type of binder used and the other components of the system a pronounced shear-thinning flow behavior. It is well suited as thickening agent for all waterborne painting systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel Thixo 2 | OMG Borchers GmbH | Borchi® Gel Thixo 2 is a thixotropic agent and thickener for paints containing solvents of a mainly non-polar or weakly polar nature. It is suitable for use in binder systems based on drying oils, alkyd resins, epoxy resin esters, unsaturated polyesters, ...view more Borchi® Gel Thixo 2 is a thixotropic agent and thickener for paints containing solvents of a mainly non-polar or weakly polar nature. It is suitable for use in binder systems based on drying oils, alkyd resins, epoxy resin esters, unsaturated polyesters, polyurethanes, chlorinated rubber, etc. This product is supplied as a fine white powder and is used in gloss, silk finish and matted paints. view less | |
| Borchi® Gen 0451 | OMG Borchers GmbH | Borchi® Gen 0451 is a solvent-free polyurethane oligomer with excellent wetting and deflocculation properties. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization, which helps...view more Borchi® Gen 0451 is a solvent-free polyurethane oligomer with excellent wetting and deflocculation properties. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization, which helps achieve excellent color strength and high gloss. Borchi® Gen 0451 is especially recommended for high quality industrial, automotive and automotive refinishing paints as well as for preparing universal pigment pastes. It is suitable for both solvent based and water based systems. view less | |
| Borchi® Gen 0650 | OMG Borchers GmbH | Borchi® Gen 0650 is an anionic, solvent- and APEOs-free wetting and dispersing agent for aqueous and solvent-borne systems, as well as for solvent-free formulations. Due to its anionic structure, this product is suitable for dispersing and stabilisation o...view more Borchi® Gen 0650 is an anionic, solvent- and APEOs-free wetting and dispersing agent for aqueous and solvent-borne systems, as well as for solvent-free formulations. Due to its anionic structure, this product is suitable for dispersing and stabilisation of pigments having polar surface. The additive produces an equal charge on the pigments surface and thus effectively prevents re-flocculation of pigments having various surface charges. view less | |
| Borchi® Gen 0755 | OMG Borchers GmbH | Borchi® Gen 0755 is a solvent-free high molecular polyurethane polymer with excellent wetting and deflocculation properties systems. It improves pigment wetting, shortens the dispersion process and efficiently deflocculates pigments through sterical stabi...view more Borchi® Gen 0755 is a solvent-free high molecular polyurethane polymer with excellent wetting and deflocculation properties systems. It improves pigment wetting, shortens the dispersion process and efficiently deflocculates pigments through sterical stabilization. Due to the small particle size of the deflocculated pigments, excellent color strength and high gloss is achieved. This product prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. view less | |
| Borchi® Gen 0851 | OMG Borchers GmbH | Borchi® Gen 0851 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. Particularly when using carbon blac...view more Borchi® Gen 0851 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. Particularly when using carbon blacks and organic pigments, this product significantly reduces the viscosity of the mill base, enabling the production of highly concentrated pigment pastes. lt effectively inhibits pigment reflocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. Borchi® Gen 0851 enhances the gloss and reduces the haze of finishing paints. view less | |
| Borchi® Gen 1051 | OMG Borchers GmbH | Borchi® Gen 1051 is a polyurethane polymer-based wetting and dispersing additive with outstanding wetting and deflocculating properties. It is intended specifically for high-grade solventborne applications. This product is particularly recommended for use...view more Borchi® Gen 1051 is a polyurethane polymer-based wetting and dispersing additive with outstanding wetting and deflocculating properties. It is intended specifically for high-grade solventborne applications. This product is particularly recommended for use in high-grade industrial coatings such as automotive-OEM and repair coatings, as well as in pigmented furniture finishes. Its main area of use is in two-component polyurethane-based systems and it shows optimal compatibility in medium-polar binder systems. view less | |
| Borchi® Gen 12 | OMG Borchers GmbH | Borchi® Gen 12 is a non-ionic, solvent-free wetting and dispersing agent for aqueous and solventborne pigment pastes, emulsion paints and lacquers. The active ingredient is based on renewable raw materials and is completely free of VOCs and APEOs. This pr...view more Borchi® Gen 12 is a non-ionic, solvent-free wetting and dispersing agent for aqueous and solventborne pigment pastes, emulsion paints and lacquers. The active ingredient is based on renewable raw materials and is completely free of VOCs and APEOs. This product improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive effectively prevents a reflocculation of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation. view less | |
| Borchi® Gen 1251 | OMG Borchers GmbH | Borchi® Gen 1251 is a polyurethane oligomer with excellent wetting and deflocculation properties. This product is free of aromatic solvents. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through steri...view more Borchi® Gen 1251 is a polyurethane oligomer with excellent wetting and deflocculation properties. This product is free of aromatic solvents. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1251 is especially recommended for high quality industrial, automotive and automotive refinishing paints as well as for preparing pigment pastes. view less | |
| Borchi® Gen 1252 | OMG Borchers GmbH | Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for prep...view more Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous and solventborne pigment concentrates with and without grinding resin. view less | |
| Borchi® Gen 1253 | OMG Borchers GmbH | Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applica...view more Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applications. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1253 prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. In addition, this product contains no organic solvents whatsoever and is completely VOC-free. view less | |
| Borchi® Gen 1350 | OMG Borchers GmbH | Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins...view more Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous pigment concentrates. Borchi® Gen 1350 reveals high dispersing and stabilizing capability for transparent iron oxide pigments as well as organic and inorganic pigments. view less | |
| Borchi® Gen 911 | OMG Borchers GmbH | Borchi® Gen 911 is a wetting and dispersing agent dissolved in hydrocarbons for paints and pigment pastes containing solvent. It is specially recommended for alkyd resin based systems. This product consists of a combination of active ingredients with very...view more Borchi® Gen 911 is a wetting and dispersing agent dissolved in hydrocarbons for paints and pigment pastes containing solvent. It is specially recommended for alkyd resin based systems. This product consists of a combination of active ingredients with very good wetting and dispersion-promoting properties and also anti-settling properties during storage. It inhibits both re-agglomeration of the pigments and formation of hard sediment. Borchi® Gen 911 brings about rapid wetting and thus shortens the grinding process. The extremely fine pigment grind also leads to improved pigment yield, greater color intensity and better hiding power. It can be used in virtually all conventional lacquers and oil paints and is particularly suitable for systems containing pigments with a tendency to settle. view less | |
| Borchi® Gen AP | OMG Borchers GmbH | Borchi® Gen AP is a non-ionic, APEOs-free wetting and dispersing additive based on phosphonic acid ester. It is suitable for waterborne pigment pastes, emulsion paints and surface coatings. This product is free of solvents and VOCs. | |
| Borchi® Gen DFN | OMG Borchers GmbH | Borchi® Gen DFN is a non-ionic, APEO-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and improves pigment wetting and shortens...view more Borchi® Gen DFN is a non-ionic, APEO-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive - even when added afterwards - effectively prevents floating of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation. This product is suitable for air-drying and baking emulsion paints and lacquers. The main areas of application are in pure acrylic, styrene-acrylic and styrene-butadiene dispersions. view less | |
| Borchi® Gen HE | OMG Borchers GmbH | Borchi® Gen HE is an additive to used improve adhesion of baking paints and primers on metal substrate. It is also used to improve the fixation of metallic pigments in coatings. This product is completely silicone-free. Borchi® Gen HE shows good compatibi...view more Borchi® Gen HE is an additive to used improve adhesion of baking paints and primers on metal substrate. It is also used to improve the fixation of metallic pigments in coatings. This product is completely silicone-free. Borchi® Gen HE shows good compatibility with various resins; nevertheless a compatibility check is recommended. view less | |
| Borchi® Gen HMP-F | OMG Borchers GmbH | Borchi® Gen HMP-F is an additive to improve adhesion, used mainly in baking paints and primers. This product is completely silicone-free. Borchi® Gen HMP-F is used to improve adhesion, predominantly in baking systems. In addition to improved adhesion, inc...view more Borchi® Gen HMP-F is an additive to improve adhesion, used mainly in baking paints and primers. This product is completely silicone-free. Borchi® Gen HMP-F is used to improve adhesion, predominantly in baking systems. In addition to improved adhesion, increased film elasticity is also achievable. view less | |
| Borchi® Gen ND Plus | OMG Borchers GmbH | Borchi® Gen ND plus is a wetting and dispersing agent recommended above all for use in solvent-borne and solvent-free industrial coatings. Because of its 100 % active ingredient content, it is equally suitable for waterborne systems such as emulsion paint...view more Borchi® Gen ND plus is a wetting and dispersing agent recommended above all for use in solvent-borne and solvent-free industrial coatings. Because of its 100 % active ingredient content, it is equally suitable for waterborne systems such as emulsion paints and water based pigment concentrates. It has good wetting and dispersing properties even at low dosages and especially with inorganic pigments. view less | |
| Borchi® Gen PB 60 | OMG Borchers GmbH | Borchi® Gen PB 60 is excellently suited to the manufacture of stock pastes from powdered inorganic gelling agents in organic solvents, such as white spirit, xylene, butyl glycol. Borchi® Gen PB 60 can be used in styrenated alkyd resins; epoxy ester resins...view more Borchi® Gen PB 60 is excellently suited to the manufacture of stock pastes from powdered inorganic gelling agents in organic solvents, such as white spirit, xylene, butyl glycol. Borchi® Gen PB 60 can be used in styrenated alkyd resins; epoxy ester resins; alkyd / nitrocellulose; alkyd / urea / melamine silicone resins; chlorinated and cyclized rubber; vinyl resins PVC organosols / plastisols Unsaturated polyesters (UPR). view less | |
| Borchi® Gen SN 95 | OMG Borchers GmbH | Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re...view more Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re-flocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. This product enhances the gloss and reduces the haze of finishing paints, contains no organic solvents whatsoever and is completely VOC-free. view less | |
| Borchi® Gen TS | OMG Borchers GmbH | Borchi® Gen TS is excellently suited to the manufacture of stock pastes from powdery inorganic gelling agents in organic solvents such as white spirit, xylene, butyl glycol. It has several advantages, including very short dispersion and maturing time of h...view more Borchi® Gen TS is excellently suited to the manufacture of stock pastes from powdery inorganic gelling agents in organic solvents such as white spirit, xylene, butyl glycol. It has several advantages, including very short dispersion and maturing time of highly concentrated pastes, homogeneous, easily usable, pumpable and scoopable gels; stable, non-skinning, corrosion-inhibiting pastes, even if stored for long periods in opened containers; and can also be fully subsequently incorporated using high-speed mixer. It also has excellent binder compatibility and no effect on drying properties of binders which dry physically or by oxidation view less | |
| Borchi® Gen WNS | OMG Borchers GmbH | Borchi® Gen WNS is a non-ionic, APEOs-free wetting and dispersing additive both for waterborne and for glycol based universal pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and is suitable for dispersing pigments (ma...view more Borchi® Gen WNS is a non-ionic, APEOs-free wetting and dispersing additive both for waterborne and for glycol based universal pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and is suitable for dispersing pigments (mainly organic), pigments granulates and pigment press cakes to produce aqueous pigment preparations. view less | |
| Borchi® Gen WS | OMG Borchers GmbH | Borchi® Gen WS is a non-ionic, APEOs-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. With its active ingredient content of 100 %, this product is free of solv...view more Borchi® Gen WS is a non-ionic, APEOs-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. With its active ingredient content of 100 %, this product is free of solvents and VOCs. It is suitable for use as a dispersing agent in the production of pigment pastes based on organic and inorganic pigments, pigment granulates and pigment press cakes. view less | |
| Borchi® Gol 0011 | OMG Borchers GmbH | Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid ...view more Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid epoxy and polyurethane resins. This product acts as a flow promoter in such systems, destroying bubbles appearing during application and preventing crater formation. Borchi® Gol 0011 can be used in all conventional solvent-containing and solvent-free, liquid 2-component epoxy resin and polyurethane systems.. view less | |
| Borchi® Gol 1375 | OMG Borchers GmbH | Borchi® Gol 1375 is a solution of non-ionic and amphoteric surfactants as active ingredients for the promotion of substrate wetting of hydrophobic or dirt/oil contaminated surfaces, VOC- and APEO-free. Borchi® Gol 1375 is a highly efficient additive with...view more Borchi® Gol 1375 is a solution of non-ionic and amphoteric surfactants as active ingredients for the promotion of substrate wetting of hydrophobic or dirt/oil contaminated surfaces, VOC- and APEO-free. Borchi® Gol 1375 is a highly efficient additive with strong surface affinity and low-foaming properties. It can be used in waterborne and solventborne systems. view less | |
| Borchi® Gol 3451 | OMG Borchers GmbH | Borchi® Gol 3451 prevents levelling / flowing resulting in surface structures, used for creating special effects such as hammer-finish. Recoatability is not recommended with this product. It can be used in virtually all binder systems. | |
| Borchi® Gol 3467 | OMG Borchers GmbH | Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi®...view more Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi® Gol 3467 can be used in waterborne and solvent borne. view less | |
| Borchi® Gol 3739 | OMG Borchers GmbH | Borchi® Gol 3739 is a substrate wetting agent for aqueous paints. It improves wetting of critical supports like oil or grease contaminated steel, plastics and resinous wood. This product is highly efficient and has an excellent compatibility with most kin...view more Borchi® Gol 3739 is a substrate wetting agent for aqueous paints. It improves wetting of critical supports like oil or grease contaminated steel, plastics and resinous wood. This product is highly efficient and has an excellent compatibility with most kinds of water based binder systems. view less | |
| Borchi® Gol E2 | OMG Borchers GmbH | Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-fre...view more Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-free and can be used in all solvent-containing and solvent-free, single- and multi-component paints. Factors affecting the efficacy of the surface-active substances, besides the type of binder used, are application and mixing conditions. view less | |
| Borchi® Gol H 250 | OMG Borchers GmbH | Borchi® Gol H 250 is a leveling agent for baking enamels such as coil and can-coat paints. It improves flow properties. Because of its good compatibility, it can be used in numerous paint systems. lf used in polyurethane systems, a secondary reaction with...view more Borchi® Gol H 250 is a leveling agent for baking enamels such as coil and can-coat paints. It improves flow properties. Because of its good compatibility, it can be used in numerous paint systems. lf used in polyurethane systems, a secondary reaction with the solvent n-butanol may occur. view less | |
| Borchi® Gol LA 1 | OMG Borchers GmbH | Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used ei...view more Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl-functional polyacrylates and polyesters, primarily polyester melamine or polyester isocyanate systems. In physically drying systems like water-soluble alkyds, polyurethane and acrylate dispersions, this product improves scratch, levelling and slip behaviour. view less |
