| Acronal® 7015 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal ® 7015 is a finely dispersed emulsion polymer that has a medium viscosity. It is a fill with good bond force. It has good flexibility and anti-sticky features on the film. | |
| Acronal® A 684 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural f...view more Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural finishes, wood paints, wood stains, latex paints, and textured finishes. view less | |
| Acronal® PA 510 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain prod...view more Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain produced with Acronal® PA 510 are therefore highly blocking- resistant and at the same time flexible. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate like aged alkyd resin paints. Acronal® PA 510 formulated high gloss coating provides high block resistant. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate especially to aged alkyd. view less | |
| Joncryl® 1980 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 1980 is a self-crosslinking acrylic emulsion that is non- formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1980 emulsion offers excellent clarity, low foaming, and excellent crack resist...view more Joncryl® 1980 is a self-crosslinking acrylic emulsion that is non- formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1980 emulsion offers excellent clarity, low foaming, and excellent crack resistance. The chemical resistance of Joncryl® 1980 emulsion may allow its use in other applications, such as concrete coatings, specialty hardboard and plastics. view less | |
| Joncryl® 1982 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 1982 emulsion is a one package, self-crosslinking acrylic emulsion that is non- formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1982 emulsion offers excellent clarity, low foaming, and ...view more Joncryl® 1982 emulsion is a one package, self-crosslinking acrylic emulsion that is non- formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1982 emulsion offers excellent clarity, low foaming, and excellent crack resistance. The chemical resistance of Joncryl® 1982 emulsion may allow its use in other applications, such as concrete coatings, specialty hardboard and plastics. view less | |
| Joncryl® 8224 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8224 is a rheology controlled acrylic emulsion for use in industrial applied lacquers for furniture and flatstock or metal primers. Specifically, it is developed for application in clear primers and topcoats for furniture and flatstock. Due to it...view more Joncryl® 8224 is a rheology controlled acrylic emulsion for use in industrial applied lacquers for furniture and flatstock or metal primers. Specifically, it is developed for application in clear primers and topcoats for furniture and flatstock. Due to its excellent stackability, drying speed and fast hardness development, Joncryl® 8224 can be used in high speed lines. This product has good adhesion to a variety of substrates, including melamine, UV coated substrates and galvanized metal. Joncryl® 8224 has excellent (hot) block resistance, fast stackability, fast hardness development and good chemical resistance. view less | |
| Joncryl® 8284 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8284 is a rheology controlled acrylic emulsion for use in industrial applied lacquers for furniture and flatstock or metal primers. It was designed to use as a fast drying industrial primer for the timber industry to coat prefab window frames, do...view more Joncryl® 8284 is a rheology controlled acrylic emulsion for use in industrial applied lacquers for furniture and flatstock or metal primers. It was designed to use as a fast drying industrial primer for the timber industry to coat prefab window frames, doors and wooden trim. Joncryl® 8284 is a Rheology Controled emulsion exhibiting the typical properties resulting from this technology, which includes good flow and leveling, low foaming, and good shear and temperature stability. Joncryl® 8284 has good tannin isolating properties when used on tropical hardwoods. view less | |
| Joncryl® 8330 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8330 is a self-crosslinking acrylic emulsion. It shows very good appearance (high clarity), excellent block and chemical resistance. This product is recommended for high-quality clear and pigmented water-based wood coatings. | |
| Joncryl® 95 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 95 is an acrylic emulsion polymer for industrial waterborne wood stains. It is an ultra-fine particle size acrylic emulsion designed for use in wood stain applications. Joncryl® 95 provides solution-like appearance and penetration properties alon...view more Joncryl® 95 is an acrylic emulsion polymer for industrial waterborne wood stains. It is an ultra-fine particle size acrylic emulsion designed for use in wood stain applications. Joncryl® 95 provides solution-like appearance and penetration properties along with reduced grain raising. view less | |
| Joncryl® HYB 6336 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® HYB 6336 is a cost effective, ecological “NMP”-free aliphatic polyurethane acrylic hybrid (HYB) for high-quality water-based clear coats on wood. It is developed for application in clear topcoats for high-quality industrial wood coatings. Due to ...view more Joncryl® HYB 6336 is a cost effective, ecological “NMP”-free aliphatic polyurethane acrylic hybrid (HYB) for high-quality water-based clear coats on wood. It is developed for application in clear topcoats for high-quality industrial wood coatings. Due to its excellent appearance, drying speed and resistance properties, Joncryl® HYB 6336 is suitable to replace solvent-based coatings in high-quality finishes. This product has excellent appearance and clarity, good chemical resistance, fast hardness development and scratch resistance. view less | |
| Joncryl® U4190 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® U4190 is a "NMP" free aliphatic waterborne polyuerathane dispersion for high end wood coatings and other industry coatings. It provides excellent abrasion resistance and toughness, good adhesion on most of the substrates, and good chemical resist...view more Joncryl® U4190 is a "NMP" free aliphatic waterborne polyuerathane dispersion for high end wood coatings and other industry coatings. It provides excellent abrasion resistance and toughness, good adhesion on most of the substrates, and good chemical resistance. This product imparts excellent water resistance to coatings for wood, metal, concrete and plastic. It is compatible with a wide range of acryic emulsions and is useful in upgrading adhesion, toughness and flexibility. view less | |
| Laromer® LR 8987 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® LR 8987 is a urethane-modified acrylic resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. It is an aliphatic urethane acrylate for making UV- and EB-curing varnishes. Varnishes m...view more Laromer® LR 8987 is a urethane-modified acrylic resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. It is an aliphatic urethane acrylate for making UV- and EB-curing varnishes. Varnishes made with Laromer® LR 8987 exhibit very little yellowing tendency. view less | |
| Laromer® LR 9004 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® LR 9004 is a polyester-modified acrylic resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. The shelf life for this product is 12 months. These resins have a balanced property pro...view more Laromer® LR 9004 is a polyester-modified acrylic resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. The shelf life for this product is 12 months. These resins have a balanced property profile and are used as sole binders or in combination with other unsaturated acrylic resins for the formulation of electron-beam- or UV-curable printing inks or coatings. Films based on Laromer® LR 9004 are very tough and highly resistant to chemicals. view less | |
| Laromer® LR 9013 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® LR 9013 is an unsaturated modified dispersing resin to formulate radiation-curable pigment pastes and radiation-curable offset, flexographic or silk-screen printing inks. Inks based on Laromer® LR 9013 are characterized by an excellent yield valu...view more Laromer® LR 9013 is an unsaturated modified dispersing resin to formulate radiation-curable pigment pastes and radiation-curable offset, flexographic or silk-screen printing inks. Inks based on Laromer® LR 9013 are characterized by an excellent yield value even at high pigmentation levels, high gloss, excellent runability, little moisture expansion; they cure to produce low-odor films. Laromer® LR 9013 can also be used to formulate coatings for paper, plastic films, metals, wood and wood products. In radiationcurable coatings for wood or wood products, it reduces absorption into the substrate. Films show little shrinkage and good wetting. view less | |
| Laromer® LR 9019 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® LR 9019 is a modified aromatic epoxy acrylate resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. The resin can be used solely or in combination with other unsaturated acrylic res...view more Laromer® LR 9019 is a modified aromatic epoxy acrylate resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. The resin can be used solely or in combination with other unsaturated acrylic resins to formulate electron- or UV-beamcurable printing inks and coatings for wood, wood products, plastics and paper. Laromer® LR 9019 is markedly more viscoelastic and more reactive than Laromer® LR 8986. view less | |
| Laromer® PE 56 F | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® PE 56 F is a polyester-modified acrylic resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. These resins have a balanced property profile are used as sole binders or in combinatio...view more Laromer® PE 56 F is a polyester-modified acrylic resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. These resins have a balanced property profile are used as sole binders or in combination with other unsaturated acrylic resins for the formulation of electron-beam- or UV-curable printing inks or coatings view less | |
| Laromer® PE 9074 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® PE 9074 is a polyester acrylate resin for the formulation of radiation-curable inks and coatings for wood, wood products and plastics. The pronounced elasticity/toughness of UV-cured coatings based on Laromer® PE 9074 provides for an interesting ...view more Laromer® PE 9074 is a polyester acrylate resin for the formulation of radiation-curable inks and coatings for wood, wood products and plastics. The pronounced elasticity/toughness of UV-cured coatings based on Laromer® PE 9074 provides for an interesting profile of mechanical properties demanded in many applications, e.g., post-forming. Laromer® PE 9074 distinguishes itself by its medium viscosity and thus is suitable for applications such as offset printing inks and roller coatings. This product is used as a sole binder or in combination with other radiation-curable resins to formulate coatings curable by ultraviolet light or electron beam. view less | |
| Laromer® PO 9026 N | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® PO 9026 N is a polyether acrylate resin with 50 % nano-scale silica for the formulation of radiation-curable coatings for plastics, wood and wood products. It shows an extraordinarily good resistance to scratching and is used in combination with...view more Laromer® PO 9026 N is a polyether acrylate resin with 50 % nano-scale silica for the formulation of radiation-curable coatings for plastics, wood and wood products. It shows an extraordinarily good resistance to scratching and is used in combination with other radiation-curable resins to formulate UV- or electron-beam-curable coatings for wood, wood products and plastics. view less | |
| Laromer® PO 94 F | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® PO 94 F is a multifunctional, polymeric amine modified polyether acrylate generally employed to boost the reactivity of both UV/EB inks and UV/EB overprint varnishes in graphic arts and of pigmented and non-pigmented UV/EB lacquers in wood coati...view more Laromer® PO 94 F is a multifunctional, polymeric amine modified polyether acrylate generally employed to boost the reactivity of both UV/EB inks and UV/EB overprint varnishes in graphic arts and of pigmented and non-pigmented UV/EB lacquers in wood coatings. This product is fully compatible with all common monomers and with all common oligomers like epoxy, polyester and urethane acrylates. It is soluble in many organic solvents like esters, ketones and aromatic hydrocarbons as used in UV spray coating applications for example. Laromer® PO 94 F provides superior film forming properties leading to tough, flexible coatings after UV/EB curing. It also features outstanding solvent fastness with high MEK and acetone resistance. This product is an excellent choice as sole binder for radiation curable clear coats, where fast curing speed, high gloss and low yellowing are required. Laromer® PO 94 F is particularly suitable as main binder or co-binder resin for UV/EB overprint varnishes as well as for UV/EB offset and UV flexo inks in food packaging applications, where low odour and a very low level of migratable species are required. view less | |
| Laromer® PR 9052 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® PR 9052 is a special acrylate dissolved in TMPTA for the formulation of radiation curable putties, primers and topcoats for wood, wood products and plastic applications. It is a medium reactive modified polyester resin, preferably used for wood a...view more Laromer® PR 9052 is a special acrylate dissolved in TMPTA for the formulation of radiation curable putties, primers and topcoats for wood, wood products and plastic applications. It is a medium reactive modified polyester resin, preferably used for wood applications. Due to the high network density, coatings based on Laromer® PR 9052 show a high hardness and scratch resistance after curing. In combination with aluminium oxide Laromer® PR 9052 shows very good abrasion resistance according to S42. For putties, different fillers can be used, e.g. talcum, kaolin, barite or silica. view less | |
| Laromer® UA 9033 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9033 is a urethane-modified acrylic resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. It is an aliphatic, 70 % solution in Laromer® LR 8887. This product is used as a sole bi...view more Laromer® UA 9033 is a urethane-modified acrylic resin for the formulation of radiation-curable printing inks and coatings for wood, wood products, paper and plastics. It is an aliphatic, 70 % solution in Laromer® LR 8887. This product is used as a sole binder or in combination with other reactive acrylic resins to formulate coatings for wood, paper and plastics. Its films exhibit very little yellowing and excellent elasticity. view less | |
| Laromer® UA 9047 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9047 is a urethane-modified acrylic resin for the formulation of printing inks and coatings for wood, wood products, plastics and the automotive industry. It is a 70% solution in butyl acetate. This product is resistant to yellowing and suitab...view more Laromer® UA 9047 is a urethane-modified acrylic resin for the formulation of printing inks and coatings for wood, wood products, plastics and the automotive industry. It is a 70% solution in butyl acetate. This product is resistant to yellowing and suitable for a wide choice of applications. The very good resistance to weathering, for instance, allows it to be used in coatings for the outdoors. This product exhibits good resistance to both scratching and chemicals, mainly due to the resins's functionalities. This excellent property profile can even be improved by curing in a low-oxygen atmosphere (Larolux®). Laromer® UA 9047 is a physically drying urethane acrylate, which after UV curing meets highest demands (e.g., automotive coatings). Even before being exposed to UV light, an almost tack-free film is obtained at room temperature after application and flashing off the solvents. Curing warm films at 80 °C (176 °F) under low- oxygen conditions produces highest surface qualities. view less | |
| Laromer® UA 9048 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9048 is a urethane-modified acrylic resin for the formulation of printing inks and coatings for wood, wood products, plastics and the automotive industry. It is a 75% solution in dipropyleneglycol diacrylate. This product is resistant to yello...view more Laromer® UA 9048 is a urethane-modified acrylic resin for the formulation of printing inks and coatings for wood, wood products, plastics and the automotive industry. It is a 75% solution in dipropyleneglycol diacrylate. This product is resistant to yellowing and suitable for a wide choice of applications. The very good resistance to weathering, for instance, allows it to be used in coatings for the outdoors. This product exhibits good resistance to both scratching and chemicals, mainly due to the resins's functionalities. This excellent property profile can even be improved by curing in a low-oxygen atmosphere (Larolux®). Laromer® UA 9048 is a solvent-free urethane acrylate thinned with DPGDA. It is mainly used for plastics and wood substrates. Its high acrylic functionality (it contains octafunctional fractions) is reflected by very good resistance to chemicals and scratching. To adjust the processing viscosity, Laromer® UA 9048 can be mixed with other acrylic resins as well as monomers such as DPGDA or TPGDA. view less | |
| Laromer® UA 9050 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9050 is a an acrylic resin for the formulation of printing inks and coatings for wood, wood products, plastics and the automotive industry. It is an 80% solution in butyl acetate. This product is resistant to yellowing and suitable for a wide ...view more Laromer® UA 9050 is a an acrylic resin for the formulation of printing inks and coatings for wood, wood products, plastics and the automotive industry. It is an 80% solution in butyl acetate. This product is resistant to yellowing and suitable for a wide choice of applications. The very good resistance to weathering, for instance, allows it to be used in coatings for the outdoors. This product exhibits good resistance to both scratching and chemicals, mainly due to the resins's functionalities. This excellent property profile can even be improved by curing in a low-oxygen atmosphere (Larolux®). Laromer® UA 9050 is a DPGDA-free version of Laromer® UA 9048 diluted in butyl acetate. The viscosity can be further reduced by adding butyl acetate or other common solvents. It is thus the product of choice for high-solids UV spray coatings excellently resistant to scratching, chemicals and weathering. It is compatible with other acrylic resins. view less | |
| Laromer® UA 9059 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9059 is an aliphatic urethane acrylate, 70% diluted in water. It is used for the formulation of radiation curable coatings for inks, wood, wood products, paper and plastic applications. It has excellent adhesion on wood, and the applicability ...view more Laromer® UA 9059 is an aliphatic urethane acrylate, 70% diluted in water. It is used for the formulation of radiation curable coatings for inks, wood, wood products, paper and plastic applications. It has excellent adhesion on wood, and the applicability as a hydroprimer on different wood substrates. Excellent coin test results can be obtained if applied as hydroprimer on parquet. view less | |
| Laromer® UA 9072 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9072 is an aliphatic urethane acrylate, 70 % in Laromer® TBCH. It is used for the formulation of radiation curable coatings for wood, wood products, plastic and mineral substrates. This high-viscosity liquid was developed for coatings with hig...view more Laromer® UA 9072 is an aliphatic urethane acrylate, 70 % in Laromer® TBCH. It is used for the formulation of radiation curable coatings for wood, wood products, plastic and mineral substrates. This high-viscosity liquid was developed for coatings with high elongation and flexibility and get high toughness/strength. Coatings based on Laromer® UA 9072 show an extra ordinary toughness/elasticity ration (elongation of ± 300 % at a tensile strength of approximately 15 - 20 N/mm2. Laromer® UA 9072 is recommended on wood, plastic and mineral substrates to enhance the mechanical properties. Due to low shrinkage, Laromer® UA 9072 shows good adhesion properties. The high resistance against yellowing makes Laromer® UA 9072 the preferred resin for exterior applications. In combination with suitable light stabilisers (e.g. Tinuvin® 292, Tinuvin® 400) the outdoor durability is even more enhanced. view less | |
| Laromer® WA 9057 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® WA 9057 is an acrylic resin for the formulation of radiation curable coatings for wood, wood products and plastic applications. It is a water-based UV-curable acrylic dispersion. Laromer® WA 9057 has been developed for pigmented and unpigmented p...view more Laromer® WA 9057 is an acrylic resin for the formulation of radiation curable coatings for wood, wood products and plastic applications. It is a water-based UV-curable acrylic dispersion. Laromer® WA 9057 has been developed for pigmented and unpigmented primers and topcoats for wooden furniture and plastics. This low- to medium-viscosity liquid can be applied by means of curtain coating and spraycoating in high speed coating equipment. Since Laromer® WA 9057 has good physical drying properties, it is suitable for 3D objects where shadow areas are insufficienlty cured. After physical drying, coatings based on Laromer® WA 9057 give tack free films in shadow areas after UV-curing films with good chemical resistance as well as good scratch resistance and low yellowing are obtained. view less | |
| Luhydran® A 848 S | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luhydran® A 848 S is a self-crosslinking workhorse acrylic emulsion for interior wood coating applications. This white emulsion is suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topco...view more Luhydran® A 848 S is a self-crosslinking workhorse acrylic emulsion for interior wood coating applications. This white emulsion is suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. Luhydran® A 848 S can also be used for plastics and fiber cement board. In blends with polyurethane dispersions, it provides excellent adhesion for wood floor coatings. Luhydran® A 848 S is recommended for applications such as: interior wood coatings for furniture or millwork applications; and general purpose and commercial interior coating applications. view less | |
| Luhydran® S938T | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luhydran® S938T is an aqueous, self- and externally crosslinking dispersion of a copolymer of acrylates and methacrylates as well as styrene, containing hydroxyl groups. It is used for the formulation of furniture films, heat-curing coatings on metals and...view more Luhydran® S938T is an aqueous, self- and externally crosslinking dispersion of a copolymer of acrylates and methacrylates as well as styrene, containing hydroxyl groups. It is used for the formulation of furniture films, heat-curing coatings on metals and non-metals and for two-pack polyurethane finishes. Luhydran® S 938 T self-crosslinks at baking temperatures above 150 °C (302 F). No formaldehyde is released. External crosslinking with urea- and melamine-formaldehyde resins can be brought about by the action of heat alone or – preferably – in combination with an acid catalyst. Curing with a polyisocyanate is possible at room temperature. Coatings made with Luhydran® S 938 T are hard, fast to light, resistant to blocking and hydrolysis and very resistant to household chemicals. view less | |
| Luhydran® S945T | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luhydran® S945T is an APEO-formaldehyde-free OH functional crosslinkable emulsion for interior and exterior coatings on wood, plastic, metal, concrete and glass. This slightly yellow anionic product has a broad compatibility with a wide range of polyisocy...view more Luhydran® S945T is an APEO-formaldehyde-free OH functional crosslinkable emulsion for interior and exterior coatings on wood, plastic, metal, concrete and glass. This slightly yellow anionic product has a broad compatibility with a wide range of polyisocynates and melamine resins which gives it flexible crosslinking functionality. view less |
