ACQUAMINE PD 1419_7 | DKSH | ACQUAMINE PD 1419_7 is a waterborne cycloaliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. | Request Sample |
ACQUAMINE PD 2157_2 | DKSH | ACQUAMINE PD 2157_2 is a waterborne aliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. ACQUAMINE PD 2157_2 has the following features: Fast dry time AND Long pot life. | Request Sample |
AMPARMOR 1043 | DKSH | AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating appl...view more AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR 1043 is recommended for use in liquid solvent-based, and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less | Request Sample |
AMPARMOR 2000 | DKSH | The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating...view more The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less | Request Sample |
AMPARMOR 3000 | DKSH | The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating ap...view more The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less | Request Sample |
AMPARMOR 4010 | DKSH | The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR...view more The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR 4010 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less | Request Sample |
AOX52 | DKSH | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to ...view more AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). This product is available in China, Taiwan, Japan, South Korea, Australia, New Zealand, India, USA. view less | Request Sample |
DMBA | DKSH | DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available ...view more DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available in Asia Pacific and Europe. view less | Request Sample |
FLUBE CA 140 | DKSH | FLUBE CA 140 is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
FLUBE CA 140 F | DKSH | FLUBE CA 140 F is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
FLUBE CA 40 F | DKSH | FLUBE CA 40 F is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
FLUBE CA-40 | DKSH | FLUBE CA-40 is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
FLUBE CR 100 F | DKSH | FLUBE CR 100 F is a sodium salt of polymer of naphthalene-sulphonic acids condensed with formaldehyde. | Request Sample |
FLUBE OS 139 F | DKSH | FLUBE OS 139 F is a sodium salt of polymer of naphthalene-sulphonic acids condensed with formaldehyde. | Request Sample |
FLUBE OS-39 | DKSH | FLUBE OS-39 is a sodium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
HARDLEN 13LP | DKSH | HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or...view more HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 13LP main applications is adhesive for Polyolefins, Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN 15LP | DKSH | HARDLEN 15LP is a resin grafted with Chlorine (CPO) which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN 15LP main characteristics are: ecellent Adhesion Promoter without any surface treatment such as corona or flame. Availa...view more HARDLEN 15LP is a resin grafted with Chlorine (CPO) which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN 15LP main characteristics are: ecellent Adhesion Promoter without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 15LP main applications are: gravure and printing ink, hot-stamping ink Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN CY1321P | DKSH | HARDLEN CY1321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY1321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...view more HARDLEN CY1321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY1321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any C14surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY1321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN CY2321P | DKSH | HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...view more HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY2321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN CY2329 | DKSH | HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...view more HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. HARDLEN CY2329 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN CY9122P | DKSH | HARDLEN CY9122P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9122P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...view more HARDLEN CY9122P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9122P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY9122P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN CY9124P | DKSH | HARDLEN CY9124P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9124P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...view more HARDLEN CY9124P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9124P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY9124P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN DX523P | DKSH | HARDLEN DX523P is a resin grafted with Chlorine which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX523P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or fla...view more HARDLEN DX523P is a resin grafted with Chlorine which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX523P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX523P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN DX526P | DKSH | HARDLEN DX526P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX526P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flam...view more HARDLEN DX526P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX526P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX526P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN DX530P | DKSH | HARDLEN DX530P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX530P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flam...view more HARDLEN DX530P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX530P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX530P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN EH801J | DKSH | HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EH801J main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN EW5250 | DKSH | HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN EW5515 | DKSH | HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5515 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN EZ2250 | DKSH | HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EZ2250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN F-225P | DKSH | HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...view more HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F225P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN F2P | DKSH | HARDLEN F2P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F2P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins with...view more HARDLEN F2P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F2P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F2P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN F6P | DKSH | HARDLEN F6P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F6P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins with...view more HARDLEN F6P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F6P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F6P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN NZ1004 | DKSH | HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...view more HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1004 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
HARDLEN NZ1015 | DKSH | HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...view more HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1015 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
IONPURE | DKSH | IONPURE is a soluble glass containing anti-microbial metal ions. It maintains the transparency when added to PP, PVC, PC, ABS, PC. It exhibits a high heat resistance and high performance at low concentration. IONPURE is not discolored by compounding and w...view more IONPURE is a soluble glass containing anti-microbial metal ions. It maintains the transparency when added to PP, PVC, PC, ABS, PC. It exhibits a high heat resistance and high performance at low concentration. IONPURE is not discolored by compounding and with age, as it can control the speed of releasing metal ions. It is suitable for use in flooring materials and wallpapers. view less | Request Sample |
ITAMID B | DKSH | ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings ...view more ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID B, which can also be used neat, is usually used in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems ITAMID B is usually used in combination with liquid epoxy resins giving high adhesion properties. With an epoxy resin of an epoxy weight equivalent of about 190g/eq, ITAMID B is normally used in equal parts. This ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamide resin increases flexibility but reduces resistance to chemicals. More frequently ITAMID B is combined with a solid epoxy resin in solvent systems whose pot-life changes with the percentage of solvent and temperature in addition to the type of epoxy resin used. For example, a formulation with 40% of solvents with an epoxy resin of epoxy equivalent weight 475 and a ratio of 65/35 epoxy to polyamide will exhibit a pot-life at room temperature of about two days. view less | Request Sample |
ITAMID C | DKSH | ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resi...view more ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. view less | Request Sample |
ITAMID C/F | DKSH | ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high ...view more ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C/F, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C/F when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C/F is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C/F is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. view less | Request Sample |
ITAMID D | DKSH | ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coating...view more ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces and good thermal resistance. ITAMID D, which is normally used neat, however dissolves readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. The low viscosity of ITAMID D when used in combination with liquid epoxy resins gives rise to products which can be applied even by processes of spatula, spraying and pouring. When ITAMID D is used in combination with an epoxy resin with a epoxy equivalent weight of around 190, depending on the applications the ratio between epoxy and polyamine may vary between 65/35 and 75/25 with pot-lives varying between 110 and 130 minutes. It must however be keep in mind that a higher percentage of polyamine resin increases flexibility but reduces the resistance to chemical agents. view less | Request Sample |
ITAMID FL 560 | DKSH | ITAMID FL 560 is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete and Very good handling. | Request Sample |
ITAMID FL 560S | DKSH | ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good h...view more ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good handling. view less | Request Sample |
ITAMID FL300 | DKSH | ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...view more ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. view less | Request Sample |
ITAMID FL31 | DKSH | ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...view more ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL31 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. view less | Request Sample |
ITAMID FL32 | DKSH | ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...view more ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL32 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. view less | Request Sample |
ITAMID FL328 | DKSH | ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concre...view more ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.) and primer. view less | Request Sample |
ITAMID FL40/S | DKSH | ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masse...view more ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL40/S exhibits lower sensitivity to carbonatation and lower reactivity, i.e. it gives longer utilisation and hardening times. view less | Request Sample |
ITAMID FL41W3 | DKSH | ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulatio...view more ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, ITAMID FL41W3 exhibits improved resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures and in presence of water. view less | Request Sample |
ITAMID FL520 | DKSH | ITAMID FL520, is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It is a solvent free and it can be applied in wet substrate. The principle characteris...view more ITAMID FL520, is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It is a solvent free and it can be applied in wet substrate. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity and slight flexibility with high levels of mortar stability. view less | Request Sample |
ITAMID FL520/S | DKSH | ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...view more ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. view less | Request Sample |
ITAMID FL540 | DKSH | ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water. | Request Sample |
ITAMID FL550/S | DKSH | ITAMID FL550/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...view more ITAMID FL550/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. view less | Request Sample |
ITAMID M20P | DKSH | The ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M20P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and wate...view more The ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M20P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resistance, are also required a higher resistance to ink “gel”, one of his quick recovery from the phase of “gel” and a resistance to “blocking”. The ITAMID M20P has an excellent solubility with ethyl alcohol, and is also cosolvent- soluble systems, typically mixtures of alcohols and aliphatic hydrocarbons and / or aromatic. The ITAMID M20P is compatible with most of the phenolic resins, maleic, that tonic, waxes and plasticizers monometric. The ITAMID M20P is generally incompatible with polyesters, vinyl resins and urea. view less | Request Sample |
ITAMID M21P | DKSH | The ITAMID M21P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M21P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and wate...view more The ITAMID M21P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M21P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resistance, are also required a higher resistance to ink “gel”, one of his quick recovery from the phase of “gel” and a resistance to “blocking”. The ITAMID M21P has an excellent solubility with ethyl alcohol, and is also cosolvent- soluble systems, typically mixtures of alcohols and aliphatic hydrocarbons and / or aromatic. The ITAMID M21P is compatible with most of the phenolic resins, maleic, that tonic, waxes and plasticizers monometric. The ITAMID M21P is generally incompatible with polyesters, vinyl resins and urea. view less | Request Sample |
ITAMINE CA165 | DKSH | ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure te...view more ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure temperatures. ITAMINE CA 165 has good resistance to water spotting and also features good blush resistance. view less | Request Sample |
ITAMINE CA30 | DKSH | ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for applica...view more ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems): ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. view less | Request Sample |
ITAMINE CA30LA | DKSH | ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for app...view more ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems). view less | Request Sample |
ITAMINE CA51L | DKSH | ITAMINE CA51L is an Epoxy Resins curing agent based on cycloaliphatic amines, it is particularly indicated for room temperature, solvent free systems or coatings. The main properties of ITAMINE CA51L are the following: GOOD LEVELLING AND WETTING CAPACITY,...view more ITAMINE CA51L is an Epoxy Resins curing agent based on cycloaliphatic amines, it is particularly indicated for room temperature, solvent free systems or coatings. The main properties of ITAMINE CA51L are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENING EVEN AT 5°C AND WIT H HIGH RELATIVE HUMIDITY (95%), STABLE COLOUR, HIGH GLOSS and GOOD MECHANICAL AND CHEMICAL RESISTANCE. view less | Request Sample |
ITAMINE CA60 | DKSH | ITAMINE CA60 is an Epoxy Resins curing agent based on cycloaliphatic amine adduct, it is particularly indicated for room temperature, solvent free systems, glazes and food covering with low fatty content for example wine and fresh water tank. | Request Sample |
ITAMINE CA70 | DKSH | ITAMINE CA70 is an Epoxy Resins curing agent based on cycloaliphatic amines. The main properties of ITAMINE CA70 are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENIN...view more ITAMINE CA70 is an Epoxy Resins curing agent based on cycloaliphatic amines. The main properties of ITAMINE CA70 are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENING EVEN AT 5°C AND WIT H HIGH RELATIVE HUMIDITY (95%), STABLE COLOUR, HIGH GLOSS and GOOD MECHANICAL AND CHEMICAL RESISTANCE. ITAMINE CA70 is also indicated for food covering with low fatty content for example wine and fresh water tank. view less | Request Sample |
ITAMINE CA80 | DKSH | ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for applica...view more ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems) The main properties of this hardener are the following: COMPLETE CURING EVEN AT LOW TEMPERATURE (0°C), ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. view less | Request Sample |
ITAMINE FL43 | DKSH | ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Com...view more ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, such as polyaminoamide resins, ITAMINE FL43 exhibits greater reactivity, resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures. Finally, comparing the classical amine hardeners, which are normally classified as “corrosive” substances, ITAMINE FL43 exhibits lower hazard (it is actually classified only as an “irritating” substance). view less | Request Sample |
Luna ACMO | DKSH | Luna ACMO has been used for UV and EB curable resins (primarily inks and coatings). It has been found that ACMO displays similar properties as other reactive diluent monomers, such as N-vinyl pirrolidone (NVP), but exceeds them in performance and safety. ...view more Luna ACMO has been used for UV and EB curable resins (primarily inks and coatings). It has been found that ACMO displays similar properties as other reactive diluent monomers, such as N-vinyl pirrolidone (NVP), but exceeds them in performance and safety. Luna ACMO is used as a reactive diluent monomer for UV, EB curable resins in radicalic systems. Luna ACMO has good compatibility with oligomers, multi-functional acrylates, and resin components having a quicker hardening speed in the polymerization process than Isobornyl Acrylate and Phenoxyethyl Acrylate. Luna ACMO provides UV, EB curable resins made with a low hygroscopicity and good resistance to alkali, acids, and solvents. Moreover it has a nitrogen radical, which prevents generation of ozone inhibiting polymerization. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna ADH | DKSH | Luna ADH is mainly used as Chain Extender in waterbourne polyurethane systems. Commonly it is used in combination with Luna DAAM. Can also be used as a chain Extender for waterbourne PU Systems. This product is available in Europe, Asia and North America. | Request Sample |
Luna DAAM | DKSH | Luna DAAM is a functional monomer. It readily homopolymerises as well as copolymerises with a variety of co-monomers. Poly (diacetone acrylamide) has a high water absorption. Resulting polymers have high hydrophilicity, air permeability, transparency and ...view more Luna DAAM is a functional monomer. It readily homopolymerises as well as copolymerises with a variety of co-monomers. Poly (diacetone acrylamide) has a high water absorption. Resulting polymers have high hydrophilicity, air permeability, transparency and UV stability. Luna DAAM can be used in the following areas: paper treatment, adhesives, water borne coatings (cross linkable at room temperature), photosensitive resins, crosslinking agents, textile treatment, hairsprays and resin modifier. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna DCD 10 | DKSH | Luna DCD 10 is an ultra-micronized grade of Dicyandiamide containing 1.6% of anti-blocking agent to prevent caking and improving application. It is designed for use as a latent curing agent for epoxy resins. This product is available in Europe, Asia and N...view more Luna DCD 10 is an ultra-micronized grade of Dicyandiamide containing 1.6% of anti-blocking agent to prevent caking and improving application. It is designed for use as a latent curing agent for epoxy resins. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna PTSI P | DKSH | Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against det...view more Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against deterioration and discoloration. The use of Luna PTSI P in the formulation process prevents moisture-related problems. Luna PTSI P reacts rapidly with excess water to form the corresponding carbamic acid, which in turn, undergoes immediate decomposition to form carbon dioxide and non-reacting p-toluenesulfonamide. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna SI ICPTES | DKSH | Luna SI ICPTES is an isocyanate functional silane. It is used for the functionalization of numerous compounds with active hydrogen atoms. Luna SI ICPTES hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce si...view more Luna SI ICPTES is an isocyanate functional silane. It is used for the functionalization of numerous compounds with active hydrogen atoms. Luna SI ICPTES hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce siloxanes. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-add K C404 | DKSH | Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGI...view more Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGIC or cured with glycidylesters. view less | Request Sample |
Luna-add K C405-SD | DKSH | Luna-add K C405-SD is a masterbatch of a catalyst for carboxyl / epoxy reaction in superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cur...view more Luna-add K C405-SD is a masterbatch of a catalyst for carboxyl / epoxy reaction in superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cured with TGIC or with glycidylesters. view less | Request Sample |
Luna-cat 7318 | DKSH | Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe,...view more Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-charge 2485 | DKSH | Luna-charge 2485 is a polar fatty acid derivative used as charge-enhancing additive to improve powder coating transfer-efficiency and minimize Faraday-cage effects during Corona spray applications. This product can be used as a replacement for LancoStat 3...view more Luna-charge 2485 is a polar fatty acid derivative used as charge-enhancing additive to improve powder coating transfer-efficiency and minimize Faraday-cage effects during Corona spray applications. This product can be used as a replacement for LancoStat 308. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-clear 202 OP | DKSH | Luna-clear 202 OP is an organic phosphorous compound, which is used as an anti-yellowing agent in acrylic and epoxy/polyester powder coatings. Luna-clear 202 OP anti-yellowing properties are effective in all organic powder coatings that contain epoxy of g...view more Luna-clear 202 OP is an organic phosphorous compound, which is used as an anti-yellowing agent in acrylic and epoxy/polyester powder coatings. Luna-clear 202 OP anti-yellowing properties are effective in all organic powder coatings that contain epoxy of glycidylmethacrylate groups. It prevents yellowing in directly heated ovens and yellowing, which occures on parellel coating lines with different chemistries. Luna-clear 202 OP is halogen-free and contains no heavy metals. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-cure MACM | DKSH | Luna-cure MACM is a Cycloaliphatic amine. It is a colorless to yellow liquid, free of suspended matter. It is mainly used for curing of low viscosity epoxy resins for low solvent or solvent free formulations. Applications include high performance coatings...view more Luna-cure MACM is a Cycloaliphatic amine. It is a colorless to yellow liquid, free of suspended matter. It is mainly used for curing of low viscosity epoxy resins for low solvent or solvent free formulations. Applications include high performance coatings (marine, anti-corrosion) and composites, and encapsulating resins for electronics. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-cure PACM | DKSH | Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents ...view more Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents and water. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-cure RFE | DKSH | Lunacure RFE is a highly efficient crosslinker. It can be used for adhesives based on polyurethane, synthetic or natural rubber. It also improves adhesion to rubber-based substrates. This product is available in Europe, Asia and North America. | Request Sample |
Luna-flow C-85 | DKSH | Luna-flow C-85 is a castor oil derivative, which is used to significantly reduce the melt viscosity and increase the open time of powder coatings during the molten stage of the curing process. This product is available in Europe, Asia and North America. | Request Sample |
Luna-flow K F505 | DKSH | Luna-flow K F505 is a masterbatch of an acrylic polymer in carboxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 10% of thermoplastic acrylic polymer. | Request Sample |
Luna-flow K F615 | DKSH | Luna-flow K F615 is a masterbatch of an acrylic polymer in hydroxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 15% of thermoplastic acrylic polymer. | Request Sample |
Luna-fos 168 | DKSH | Luna-fos 168 is a thermally and hydrolytically stable secondary anti-oxidant that decomposes peroxy radicals and hydroperoxides formed during prosessing. Luna-fos 168 is FDA approved for incidental direct food contact. This product is available in Europe,...view more Luna-fos 168 is a thermally and hydrolytically stable secondary anti-oxidant that decomposes peroxy radicals and hydroperoxides formed during prosessing. Luna-fos 168 is FDA approved for incidental direct food contact. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-mer 1174 | DKSH | Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is avai...view more Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-mer 2165 | DKSH | Luna-mer 2165 is a matting agent for polyester epoxy hybrid powder coatings and can be used to produce coatings that have a 60° gloss range between 15–70 units. Cured films that contain Luna-mer 2165 offer excellent flow, outstanding anti-yellowing proper...view more Luna-mer 2165 is a matting agent for polyester epoxy hybrid powder coatings and can be used to produce coatings that have a 60° gloss range between 15–70 units. Cured films that contain Luna-mer 2165 offer excellent flow, outstanding anti-yellowing properties and very good finger-print resistance. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-mer 2165D | DKSH | Luna-mer 2165D is a synthetic resin-based matting agent for hybrid powder coatings, which is designed for wide ranges of curing requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can p...view more Luna-mer 2165D is a synthetic resin-based matting agent for hybrid powder coatings, which is designed for wide ranges of curing requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can provide ranges from 8–60% (60°) of low gloss, excellent flow and outstanding anti-yellowing. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-mer 3329-1 | DKSH | Luna-mer 3329-1 is a modified wax used as a gloss control agent to produce powder finishes having a 60° gloss range of 30–70%. This product is most suitable for epoxy/polyester and polyester- TGIC systems. This product is available in Europe, Asia and Nor...view more Luna-mer 3329-1 is a modified wax used as a gloss control agent to produce powder finishes having a 60° gloss range of 30–70%. This product is most suitable for epoxy/polyester and polyester- TGIC systems. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-mer 552 | DKSH | Luna-mer 552 is a curing agent for TGIC-free, exterior durable powder coatings based on carboxyl functional polyesters. Cured film performance is comparable to those of polyester/TGIC systems. Luna-mer 552 has an exceptionally clean toxicological profile ...view more Luna-mer 552 is a curing agent for TGIC-free, exterior durable powder coatings based on carboxyl functional polyesters. Cured film performance is comparable to those of polyester/TGIC systems. Luna-mer 552 has an exceptionally clean toxicological profile resulting in powder coatings that are safe to work with. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-mer B-31 | DKSH | Luna-mer B-31 is a hardener for highly reactive epoxy powder coatings, pure epoxy and accelerator for DICY or epoxy-polyester powder coatings. This product is available in Europe, Asia and North America. | Request Sample |
Luna-mer B-55 | DKSH | Luna-mer B-55 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. | Request Sample |
Luna-mer B-68 | DKSH | Luna-mer B-68 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. | Request Sample |
Luna-mer DDA | DKSH | Luna-mer DDA is a dibasic acid that can be used as a powder coating curing agent with GMA-functional acrylic resins. Luna-mer DDA is the hardener of choice for GMA resins due to the combination of favorable melting point, cure rate and viscosity reduction...view more Luna-mer DDA is a dibasic acid that can be used as a powder coating curing agent with GMA-functional acrylic resins. Luna-mer DDA is the hardener of choice for GMA resins due to the combination of favorable melting point, cure rate and viscosity reduction. Luna-mer DDA offers cured coatings with outstanding clarity, non-yellowing properties, chemical resistance and exterior durability. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-nox AO-76 | DKSH | Luna-nox AO-76 is a sterically hindered amine phenolic antioxidant to be used as a highly efficient stabilizer for organic substrates such as plastics, coatings, adhesives and waxes. It protects substrates against thermo-oxidative degradation. This produc...view more Luna-nox AO-76 is a sterically hindered amine phenolic antioxidant to be used as a highly efficient stabilizer for organic substrates such as plastics, coatings, adhesives and waxes. It protects substrates against thermo-oxidative degradation. This product is odorless and has excellent light stability. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-nox B900J | DKSH | Luna-nox B900J is a synergistic processing and long-term thermal stabilizer system. This product is available in Europe, Asia and North America. | Request Sample |
Luna-sperse 516 | DKSH | Luna-sperse 516 is a 100% active polymeric material which offers improved pigment dispersion and stability in powder coatings. This product is available in Europe, Asia and North America. | Request Sample |
Luna-stab 5501 | DKSH | Luna-stab 5501 is a micronized stabilizer for metallic pigments, especially aluminum powder, capable of preventing effectively degradation arising from oxygen or moisture to inhibiting surface defects such as blackening, darkening, spots formation and los...view more Luna-stab 5501 is a micronized stabilizer for metallic pigments, especially aluminum powder, capable of preventing effectively degradation arising from oxygen or moisture to inhibiting surface defects such as blackening, darkening, spots formation and loss of brilliance in appearance of metallic effect powder coatings. Luna-stab 5501 is recommended as a stabilizer, combined with some metallic pigments, especially, aluminum powder including leaf or non-leaf, to use in metallic effect powder coatings based on: Polyester/TGIC/HAA, hybrid, PU and epoxy. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-stab LS144 | DKSH | Luna-stab LS144 is a hindered amine light stabilizer (HALS) and also contains a sterically hindered phenol antioxidant. It significantly extends coating life time by minimizing paint defects such as cracking and loss of gloss. This product is available in...view more Luna-stab LS144 is a hindered amine light stabilizer (HALS) and also contains a sterically hindered phenol antioxidant. It significantly extends coating life time by minimizing paint defects such as cracking and loss of gloss. This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-tex 207 | DKSH | Luna-tex 207 is an amide modified vinylidene fluoride polymer which can be used as a special textured additive in powder coatings for a variety of end use applications (i.e., electrical equipment housing, office furniture, playground furniture, or for man...view more Luna-tex 207 is an amide modified vinylidene fluoride polymer which can be used as a special textured additive in powder coatings for a variety of end use applications (i.e., electrical equipment housing, office furniture, playground furniture, or for many industrial applications that require a textured finish). This product is available in Europe, Asia and North America. view less | Request Sample |
Luna-tex OB-S and Luna-tex OB-S Refined | DKSH | Luna-tex OB-S and Luna-tex OB-S Refined are optical brighteners with high molecular weight, suitable for use in a wide range of polymers, inks, and coatings. Chemical name: 2,5-thiophenediylbis (5-tertbutyl-1,3-benzoxazole). This product is available in ...view more Luna-tex OB-S and Luna-tex OB-S Refined are optical brighteners with high molecular weight, suitable for use in a wide range of polymers, inks, and coatings. Chemical name: 2,5-thiophenediylbis (5-tertbutyl-1,3-benzoxazole). This product is available in Europe, Asia and North America. view less | Request Sample |
POLIOS NT 170 LV | DKSH | POLIOS NT 170 LV is an aliphatic, saturated, linear polyester polyol. Hydrolyze in water, physiologically in active. Soluble in ketones and esters. This product is available in Myanmar, Malysia, South Korea, Philippines, Thailland and China. | Request Sample |
Rheolub RL-657 | DKSH | Rheolub RL-657 is a proprietary wax blend that is an effective wetting agent and dispersion aid in targeted polymers. This product is available in China, Philippines, Australia and New Zealand. | Request Sample |
ROPOL PC-11 | DKSH | ROPOL PC-11 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is Polycarbonated based on 1,6 Hexanediol enables to obtain high performance in polyurethane preparations, improving weather, heat and hydrolysis resistance. This product...view more ROPOL PC-11 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is Polycarbonated based on 1,6 Hexanediol enables to obtain high performance in polyurethane preparations, improving weather, heat and hydrolysis resistance. This product is available for Europe and Asia. view less | Request Sample |
ROPOL PC-12 | DKSH | ROPOL PC-12 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is a Polycarbonated based on 1,6 Hexanediol enables to obtain high performance polyurethane preparations, improving weather, heat and hydrolysis resistance. This product ...view more ROPOL PC-12 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is a Polycarbonated based on 1,6 Hexanediol enables to obtain high performance polyurethane preparations, improving weather, heat and hydrolysis resistance. This product is available for Europe and Asia. view less | Request Sample |
TOYOTAC PMA-L | DKSH | TOYOTAC PMA-L is a Maleic acid modified Polyolefin. It is grafted with maleic anhydride. It has high content of maleic anhydride. It is an Adhesion Promoter and compatibilizer. It is a powerful CPO and Primer. Totyotac PMA-L main characteristics are: Good...view more TOYOTAC PMA-L is a Maleic acid modified Polyolefin. It is grafted with maleic anhydride. It has high content of maleic anhydride. It is an Adhesion Promoter and compatibilizer. It is a powerful CPO and Primer. Totyotac PMA-L main characteristics are: Good Hot Melt adhesion power to Polyolefin, PET,PA, Steel, Metal and EVOH. Good compatibilizer between PP/PA, PP/EPDM, PP/PC etc. Good coupling agent for glass fiber reinforced PP and mineral-filled PP. TOYOTAC PMA-L main aplications are: Hot melt adhesives for Alminium foil and Polyolefin as wrapping materials. Hot Melt Lamination for the multi-layer films such as EVOH/PP, PA/PP. Coupling agent for Polypropylene reinforced with glass-fiber, talc or inorganic-filler. Compatibilizer for Polypropylene combination with wood-fiber. Compatibilizer for the fiber-reinforced plastics. Available in select countries. Please inquire for more details. view less | Request Sample |