| Domide GX-328B75 | Kukdo Chemical Co., Ltd. | Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curi...view more Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. view less | |
| Domide GX-328K | Kukdo Chemical Co., Ltd. | Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...view more Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. view less | |
| Domide GX-422 | Kukdo Chemical Co., Ltd. | Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for fo...view more Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. view less | |
| Domide GX-450TI60 | Kukdo Chemical Co., Ltd. | Domide GX-450TI60 is a Polyamide / Epoxy adduct dissolved in Toluene/Iso-propanol for reaction with solid Epoxy Resins. GX-450TI60 is useful in maintenance coatings and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
| Domide GX-450XB70 | Kukdo Chemical Co., Ltd. | Domide GX-450XB70 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-450XB70 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...view more Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. view less | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...view more Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. view less | |
| Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
| HAA Hardener RC552 | Hangzhou Right Chemical Co., Ltd. | HAA Hardener RC552 is a tetra-functional group containing β-hydroxyalkylamide. This product appears as a white powder. It is designed to be a substitute for TGIC and can be used to provide exterior-durable powder coatings free from TGIC. | |
| HAA Hardener RC559 | Hangzhou Right Chemical Co., Ltd. | HAA Hardener RC559 is a hydroxyalkyl amide hardener. This product appears as a white granular solid. It can be used to cure carboxyl-functional polyester for powder coating applications. | |
| Hardener RC2844 | Hangzhou Right Chemical Co., Ltd. | Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatin...view more Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatings. view less | |
| ITAMID B | DKSH | ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings ...view more ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID B, which can also be used neat, is usually used in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems ITAMID B is usually used in combination with liquid epoxy resins giving high adhesion properties. With an epoxy resin of an epoxy weight equivalent of about 190g/eq, ITAMID B is normally used in equal parts. This ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamide resin increases flexibility but reduces resistance to chemicals. More frequently ITAMID B is combined with a solid epoxy resin in solvent systems whose pot-life changes with the percentage of solvent and temperature in addition to the type of epoxy resin used. For example, a formulation with 40% of solvents with an epoxy resin of epoxy equivalent weight 475 and a ratio of 65/35 epoxy to polyamide will exhibit a pot-life at room temperature of about two days. view less | Request Sample |
| ITAMID C | DKSH | ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resi...view more ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. view less | Request Sample |
| ITAMID C/F | DKSH | ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high ...view more ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C/F, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C/F when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C/F is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C/F is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. view less | Request Sample |
| ITAMID D | DKSH | ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coating...view more ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces and good thermal resistance. ITAMID D, which is normally used neat, however dissolves readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. The low viscosity of ITAMID D when used in combination with liquid epoxy resins gives rise to products which can be applied even by processes of spatula, spraying and pouring. When ITAMID D is used in combination with an epoxy resin with a epoxy equivalent weight of around 190, depending on the applications the ratio between epoxy and polyamine may vary between 65/35 and 75/25 with pot-lives varying between 110 and 130 minutes. It must however be keep in mind that a higher percentage of polyamine resin increases flexibility but reduces the resistance to chemical agents. view less | Request Sample |
| ITAMID FL 560 | DKSH | ITAMID FL 560 is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete and Very good handling. | Request Sample |
| ITAMID FL 560S | DKSH | ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good h...view more ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good handling. view less | Request Sample |
| ITAMID FL300 | DKSH | ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...view more ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. view less | Request Sample |
| ITAMID FL31 | DKSH | ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...view more ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL31 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. view less | Request Sample |
| ITAMID FL32 | DKSH | ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...view more ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL32 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. view less | Request Sample |
| ITAMID FL328 | DKSH | ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concre...view more ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.) and primer. view less | Request Sample |
| ITAMID FL40/S | DKSH | ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masse...view more ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL40/S exhibits lower sensitivity to carbonatation and lower reactivity, i.e. it gives longer utilisation and hardening times. view less | Request Sample |
| ITAMID FL41W3 | DKSH | ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulatio...view more ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, ITAMID FL41W3 exhibits improved resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures and in presence of water. view less | Request Sample |
| ITAMID FL540 | DKSH | ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water. | Request Sample |
| Tohmide 2400 | Sanho Chemical Co., Ltd. | Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation app...view more Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation applications. view less | |
| Tohmide 2500 | Sanho Chemical Co., Ltd. | Tohmide 2500 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Tohmide 2500 is most commonly used in heat curing adhesive formulation appl...view more Tohmide 2500 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Tohmide 2500 is most commonly used in heat curing adhesive formulation applications. view less | |
| Tohmide 255 | Sanho Chemical Co., Ltd. | Tohmide 255 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 300-600 mPa.s and a specific gravity of 0.97. Tohmide 255 is most commonly used in reactive epoxy lining and ...view more Tohmide 255 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 300-600 mPa.s and a specific gravity of 0.97. Tohmide 255 is most commonly used in reactive epoxy lining and thin bonding mortar formulation applications. view less | |
| Tohmide 275 | Sanho Chemical Co., Ltd. | Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive for...view more Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive formulation applications. view less | |
| Tohmide 280-B | Sanho Chemical Co., Ltd. | Tohmide 280-B is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Tohmide 280-B is most commonly used in sealant and adhesive ...view more Tohmide 280-B is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Tohmide 280-B is most commonly used in sealant and adhesive formulation applications. view less | |
| Tohmide RS-640 | Sanho Chemical Co., Ltd. | Tohmide RS-640 is a high viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 10,000-14,000 mPa.s and a specific gravity of 0.96. Tohmide RS-640 is most commonly used in wood adhesive formulation a...view more Tohmide RS-640 is a high viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 10,000-14,000 mPa.s and a specific gravity of 0.96. Tohmide RS-640 is most commonly used in wood adhesive formulation applications. view less | |
| Tohmide TXH-674B | Sanho Chemical Co., Ltd. | Tohmide TXH-674B is a modified polyaminoamide hardener in an amber liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.11. Tohmide TXH-674B is most commonly used in concrete coating formulation applications. |
