| Desmodur® 2460 M | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 2460 M is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content and stabilized against discoloration during storage. Formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related...view more Desmodur® 2460 M is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content and stabilized against discoloration during storage. Formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Desmodur® 2460 M is an isomeric mixture of monomeric diphenylmethane diisocyanate that is liquid at temperatures above 20 °C. This product has a 2,2'-MDI of max. 0.8%, a 2,4'-MD of 55.0 ± 5.0%, and a 4,4' MDI of minimum 39.2. view less | |
| Desmodur® 44 M Flakes | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 M Flakes monomeric diphenylmethane-4,4'-diisocyanate. It is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll ®, Desmophen® and Acclaim® in the formulation o...view more Desmodur® 44 M Flakes monomeric diphenylmethane-4,4'-diisocyanate. It is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll ®, Desmophen® and Acclaim® in the formulation of adhesives and polyurethane coating resins. This product has a 4,4'-MDI of minimum 98.2%, a 2,4'-MDI of maximum 2.8, and a hydrolysable chlorine content of maximum 50mg/kg. view less | |
| Desmodur® 44 M Fused | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur 44 M Fused is a monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is used in the formulation of adhesives and polyurethane coating resins. It s solid at room temperature and liquid above around 40°C. This product has a 4,4'-MDI of min. 98.2%...view more Desmodur 44 M Fused is a monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is used in the formulation of adhesives and polyurethane coating resins. It s solid at room temperature and liquid above around 40°C. This product has a 4,4'-MDI of min. 98.2%, a 2,4'-MDI of maximum 1.8%, and a hydrolysable chlorine of maximum 50mg/kg. view less | |
| Desmodur® 44 M Liquid | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 M Liquid is a monomeric diphyylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40°C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives and polyureth...view more Desmodur® 44 M Liquid is a monomeric diphyylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40°C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives and polyurethane coating resins. This product has a 4,4'-MDI of min. 98.2%, a 2,4'-MDI of maximum 1.8%, a hydrolysable chlorine of maximum 50mg/kg, and a dimer of maximum 0.1%. view less | |
| Desmodur® 44 MC Flakes | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 MC Flakes is a monomeric diphenylmethane-4,4'-diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesive and polyurethane...view more Desmodur® 44 MC Flakes is a monomeric diphenylmethane-4,4'-diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesive and polyurethane coating resins. This product has a 4,4'-MDI of min. 98.2%, a 2,4'-MDI of maximum 1.8%, and a hydrolysable chlorine of maximum 50 ± 10mg/kg. view less | |
| Desmodur® 44 MC Fused | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 MC Fused is a monomeric diphenylmethane-4,4'-diisocyanate used in the formulation of adhesives and polyurethane coating resins, and suitable for combination with Baycoll®, Desmophen® and Acclaim®. It is solid at room temperature and liquid ab...view more Desmodur® 44 MC Fused is a monomeric diphenylmethane-4,4'-diisocyanate used in the formulation of adhesives and polyurethane coating resins, and suitable for combination with Baycoll®, Desmophen® and Acclaim®. It is solid at room temperature and liquid above around 40°C. This product has a freezing point of minimum 38.4°C, an MCO content (theoretical) of 33.6% by wt., and a phenyl isocyanate content of maximum 10ppm. view less | |
| Desmodur® 44 MC Liquid | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 MC Liquid is a monomeric diphenylmethane-4,4'-diisocyanate that is used in the formulation of adhesives and polyurethane coating resins. It is a solvent-free, colorless to pale yellow liquid of low viscosity that crystallizes at temperatures ...view more Desmodur® 44 MC Liquid is a monomeric diphenylmethane-4,4'-diisocyanate that is used in the formulation of adhesives and polyurethane coating resins. It is a solvent-free, colorless to pale yellow liquid of low viscosity that crystallizes at temperatures below 38.4°C. This product has dimer of maximum 0.1%, a density at 40°C of approximately 1.19g/cm^3, and a viscosity at 40°C of 4.1mPa·s. view less | |
| Desmodur® BL 1100/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI and is solvent-free. It can be used in combination with cycloaliphatic diamines such as Laromin® C 260 (BASF) to formulate highly flexible, one-component stoving coatings. This product ...view more Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI and is solvent-free. It can be used in combination with cycloaliphatic diamines such as Laromin® C 260 (BASF) to formulate highly flexible, one-component stoving coatings. This product has a color value (hazen) of ≤ 150, a viscosity at 23°C of 43,000 ± 10,000 mPa·s, and a free NCO content of < 0.2% view less | |
| Desmodur® E 1160 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing, one-pack polyurethane coatings. It has an NCO content of 5.4 ± 0.3%, a non-volatile matter of 60.0 ± 2.0, a viscosity...view more Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing, one-pack polyurethane coatings. It has an NCO content of 5.4 ± 0.3%, a non-volatile matter of 60.0 ± 2.0, a viscosity (23°C) of 550 ± 200, and a color (Iodine) of ≤ 3. Desmodur® E 1160 MPA/X is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and mechanical damage. view less | |
| Desmodur® E 1361 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1361 BA is an aromatic polyisocyanate prepolymer based on toluylene diisocyanate. It is used in the formulation of moisture-curing one-pack polyurethane coatings. It has an NCO content of 6.8 ± 0.3%, a non-volatile matter of 61.0 ± 2.0%, a vis...view more Desmodur® E 1361 BA is an aromatic polyisocyanate prepolymer based on toluylene diisocyanate. It is used in the formulation of moisture-curing one-pack polyurethane coatings. It has an NCO content of 6.8 ± 0.3%, a non-volatile matter of 61.0 ± 2.0%, a viscosity (23°C) of 250 ± 150 mPa·s, and a color (Iodine) of ≤ 3. Desmodur® E 1361 BA is suitable for use in formulating wood coatings, e.g. for parquet flooring and for wall and ceiling paneling, anti-corrosion coatings and impregnating systems for mineral building materials. Formulations based on Desmodur® E 1361 BA protect surfaces against moisture, oil, fuels and aggressive chemicals. view less | |
| Desmodur® E 1361 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1361 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing one-pack polyurethane coatings. This product has an NCO content of 6.8 ± 0.3%, a non-volatile matter of 61.0 ± 2.0%, a...view more Desmodur® E 1361 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing one-pack polyurethane coatings. This product has an NCO content of 6.8 ± 0.3%, a non-volatile matter of 61.0 ± 2.0%, a viscosity (23°C) of 500 ± 250 mPa·s, a color (Iodine) of ≤ 3, and a monomer content of ≤ 0.4%. Desmodur® E 1361 MPA/X is suitable for use in formulating transparent wood coatings, e.g. for parquet flooring and for wall and ceiling paneling, anti-corrosion coatings, primers and intermediate coatings. Clear impregnating systems based on Desmodur® E 1361 MPA/X provide surfaces with long-term protection against moisture, oil, fuels and aggressive chemicals. view less | |
| Desmodur® E 14 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 14 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate and is used in the formulation of highly flexible coatings, sealers, and two-pack PU sealing compounds. This product has an NCO content of 3.3 ± 0.2%, a viscosity at 23°...view more Desmodur® E 14 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate and is used in the formulation of highly flexible coatings, sealers, and two-pack PU sealing compounds. This product has an NCO content of 3.3 ± 0.2%, a viscosity at 23°C of 6,800 ± 1,200 mPa·s, and a monomeric TDI of < 0.5%. Desmodur® E 14 can be combined with Hardener® DT to formulate highly flexible sealers. It is used in one-component PU formulations, Desmodur® E 14 will improve flexibility. view less | |
| Desmodur® E 15 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 15 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate that is used in the formulation of flexible coatings and sealing compounds. This product has an NCO content of 4.4 ± 0.2%, a viscosity at 23°C of 7,000 ± 1,000 mPa·s, an...view more Desmodur® E 15 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate that is used in the formulation of flexible coatings and sealing compounds. This product has an NCO content of 4.4 ± 0.2%, a viscosity at 23°C of 7,000 ± 1,000 mPa·s, and a monomeric TDI of < 0.5%. Desmodur® E 15 can be combined with Hardener® DT to formulate highly reactive two-component systems which yield highly flexible highbuild coatings, e. g. for use as crackbridging coatings on concrete surfaces. Combination with Hardener ® VP LS 2959 produces highly flexible one-component systems, e.g. for coating flat roofs. view less | |
| Desmodur® E 1660 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1660 is an aromatic polyisocynate prepolymer based on toluene diisocyanate. It can be used in the formulation of fast-drying, moisturecuring one-component polyurethane coatings and as the hardener for two-component polyurethane coatings. This ...view more Desmodur® E 1660 is an aromatic polyisocynate prepolymer based on toluene diisocyanate. It can be used in the formulation of fast-drying, moisturecuring one-component polyurethane coatings and as the hardener for two-component polyurethane coatings. This product has an NCO content of 5.3 ± 0.3%, a viscosity at 23°C of 1,600 ± 800 mPa·s, and a monomeric TDI of < 0.5%, and a non-volatile content of 60.0 ± 2.0%. Desmodur® E 1660 is suitable for the formulation of one-component transparent wood finishes, e.g. for parquet, furniture and wall and ceiling paneling. It can also be used as the hardener for two-component coatings. Films based on Desmodur® E 1660 may tear under tough service conditions. Combination with e.g. Desmodur® E 14 or Desmodur® E 1361 is therefore recommended. The ratios must be determined empirically. view less | |
| Desmodur® E 1750 PR | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1750 PR polyisocyanate prepolymer based on toluene diisocyanate 50% solution in methoxypropylacetate/xylene. It is supplied in the formulation of moisture-curing one-component polyurethane coatings. It has an NCO content (supply form) of 5.0 -...view more Desmodur® E 1750 PR polyisocyanate prepolymer based on toluene diisocyanate 50% solution in methoxypropylacetate/xylene. It is supplied in the formulation of moisture-curing one-component polyurethane coatings. It has an NCO content (supply form) of 5.0 - 5.7%, a viscosity at 23°C of 300-450 mPa·s, a solids content of 49-51%, an iodine color value (supply form) of maximum 2, and a monomeric TDI (supply form) of maximum 0.5%.Desmodur® E 1750 PR is suitable for the formulation of wood coatings, e.g. for parquet, panelling for walls and ceilings, boats and furniture and of impregnating agents for mineral construction materials, etc. Clear coatings based on Desmodur® E 1750 PR provide surfaces with durable protection against moisture, oil fuel, aggressive chemicals and mechanical impact. view less | |
| Desmodur® E 20100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 20100 is a modified polyisocyanate prepolymer based on diphenylmethane diisocyanate. It is used as an injection resin for sealing water-conveying cracks in structures above and below ground. This product has an NCO content of 15.7 ± 0.5%, a vi...view more Desmodur® E 20100 is a modified polyisocyanate prepolymer based on diphenylmethane diisocyanate. It is used as an injection resin for sealing water-conveying cracks in structures above and below ground. This product has an NCO content of 15.7 ± 0.5%, a viscosity at 23°C of 1,100 ± 400 mPa·s, a flash point of > 200°C, and a density at 20°C of approximately 1.12g/cm^3. Desmodur® E 20100 is an injection resin used primarily to seal water breakthroughs in underground structures and to displace water from water-conveying cracks and voids. It is applied by a high- or low-pressure process using suitable injection packers view less | |
| Desmodur® E 21 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is used as a raw material in the formulation of solvent-borne one-pack polyurethane coatings which cure by reaction with atmospheric moisture. This pr...view more Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is used as a raw material in the formulation of solvent-borne one-pack polyurethane coatings which cure by reaction with atmospheric moisture. This product is also a binder for the formulation of moisture-curing, one-component coatings and adhesives; and a hardener for hydroxyl-bearing co-reactants. Desmodur® E 21 has an NCO content of 16.0 ± 0.7%, a viscosity 25°C of 5,400 ± 1,300 mPa·s, and an equivalent weight of 251-274. view less | |
| Desmodur® E 2190 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 2190 X is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). As a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture. This produ...view more Desmodur® E 2190 X is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). As a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture. This product has an NCO content of 14.3 ± 0.5, a viscosity at 25°C of 1,100 ± 400 mPa·s, a flash point of approx. 25°C, a density at 20°C of approx. 1.11g/ml. Desmodur® E 2190 X is ideal for the formulation of moisture-curing, one-component primers and sealers to protect porous substrates against moisture, oil, fuels and other chemicals. A further use is as a binder for highperformance anti-corrosion coatings for steel in hydraulic and civil engineering engineering applications. view less | |
| Desmodur® E 22 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 22 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. It can be used in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible a...view more Desmodur® E 22 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. It can be used in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible aggregates, roof and concrete sealers and rubber granules. This product has an NCO content of 8.6 ± 0.3%, a viscosity at 23°C of 2,800 ± 400 mPa·s, and an equivalent weight of 472-506. Desmodur® E 22 is suitable for the flexibilization of Desmodur® E 21/E 23 or similar products and as a binder for rubber granules. Desmodur® E 22 is also suitable for use in the formulation of solvent-free moisture-curing one-component adhesives or in combination with Baycoll to formulate two-component adhesives. These can be used to bond many materials, e.g. wood, metal and plastic. view less | |
| Desmodur® E 2200/76 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 2200/76 is a prepolymer based on diphenylmethane-diisocyanate (MDI) with isomers. It is a solvent-free, colorless to yellowish liquid that is viscous at room temperature. This product has an NCO content of 9.85 ± 0.25%, a density 20°C of appro...view more Desmodur® E 2200/76 is a prepolymer based on diphenylmethane-diisocyanate (MDI) with isomers. It is a solvent-free, colorless to yellowish liquid that is viscous at room temperature. This product has an NCO content of 9.85 ± 0.25%, a density 20°C of approx. 1.09g/cm^3, and a flash point of ≥ 200°C. Desmodur® E 2200/76 can be used as a raw material for the formulation of solvent-free, moisture-curing, one-component adhesives or in combination with Baycoll® for the formulation of two-component adhesives. Such adhesives can be used to bond a wide variety of materials such as wood, metal and plastic. view less | |
| Desmodur® E 23 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 23 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. Used as a binder for moisture-curing, one-pack coatings and as a hardener for binders bearing OH-groups. This product has an NCO content of 15.4 ± 0.4%, an equ...view more Desmodur® E 23 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. Used as a binder for moisture-curing, one-pack coatings and as a hardener for binders bearing OH-groups. This product has an NCO content of 15.4 ± 0.4%, an equivalent weight of 266-280, and a flash point of > 193°C. Desmodur® E 23 is suitable for use in the formulation of moisture-curing one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. view less | |
| Desmodur® E XP 2723 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E XP 2723 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants. Thi...view more Desmodur® E XP 2723 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants. This product has an NCO content of approx. 15.4%, a flash point of approx. 223°C, and a density at 20°C of approx. 1.12 g/ml. Desmodur® E XP 2723 is suitable for use in the formulation of moisture-curing one-component systems which, when thinned with a suitable solvent, can be used as a primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. In combination with suitable Desmophen® polyols, Desmodur® E XP 2723 yields tough but flexible, wear-resistant coatings and sealers. view less | |
| Desmodur® E XP 2727 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E XP 2727 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate that is used for one- and two-component polyurethane and polyurea coatings, adhesives and sealants. This product has a NCO content of 15.25 ± 0.25%, a visco...view more Desmodur® E XP 2727 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate that is used for one- and two-component polyurethane and polyurea coatings, adhesives and sealants. This product has a NCO content of 15.25 ± 0.25%, a viscosity at 23°C of 800 ± 200 mPa·s, and an equivalent weight of approx. 275. Desmodur® E XP 2727 is suitable for the formulation of moisture-curing polyurethane coatings, adhesives and sealants. Desmodur® E XP 2727 is also suitable as a hardener for two-component polyurethane and polyurea coatings, possibly in combinationn with other polyisocyanates. view less | |
| Desmodur® HL BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® HL BA is an aromatic/aliphatic polyisocyanate based on toluylene diisocyanate/ hexamethylene diisocyanate. It can be used with Desmophen® grades or other substances containing hydroxyl groups to make clear or pigmented, two-pack polyurethane coa...view more Desmodur® HL BA is an aromatic/aliphatic polyisocyanate based on toluylene diisocyanate/ hexamethylene diisocyanate. It can be used with Desmophen® grades or other substances containing hydroxyl groups to make clear or pigmented, two-pack polyurethane coatings with rapid drying and good lightfastness. The rapid initial drying and early sandability are of particular advantage when formulating wood coatings. With just a few coats, high-bodied clear or pigmented finishes can be easily achieved. This product has a viscosity at 23°C of 2,200 ± 1,000 mPa·s, a flash point of +28°C, and a density at 20°C of approximately 1.13g/ml. view less | |
| Desmodur® HL EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® HL EA is an aromatic/aliphatic polyisocyanate based on toluylene diisocyanate/ hexamethylene diisocyanate. It has a viscosity at 23°C of 1,100 ± 600 mPa·s, a flash point of -2°C, and a density at 20°C of approx. 1.12g/ml. This product can be use...view more Desmodur® HL EA is an aromatic/aliphatic polyisocyanate based on toluylene diisocyanate/ hexamethylene diisocyanate. It has a viscosity at 23°C of 1,100 ± 600 mPa·s, a flash point of -2°C, and a density at 20°C of approx. 1.12g/ml. This product can be used in combination with various Desmophen® grades or other suitable substances containing hydroxyl groups to formulate clear or pigmented, two-component polyurethane coatings characterized by rapid drying and good lightfastness. The rapid initial drying and early sandability are of particular advantage when formulating wood coatings. With just a few coats, high-bodied clear or pigmented finishes can be easily achieved. Desmodur® HL EA can also be used to formulate high-quality coatings for paper and foils. view less | |
| Desmodur® IL 1351 51% BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. It has an isocyanate content of 8.0 ± 0.3%, a viscosity at 23°C of 1,300 ± 450 mPa·s, and a flash point of approx. 26°C. This product is a hardener component for fast dr...view more Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. It has an isocyanate content of 8.0 ± 0.3%, a viscosity at 23°C of 1,300 ± 450 mPa·s, and a flash point of approx. 26°C. This product is a hardener component for fast drying, two-component polyurethane coatings. Desmodur® IL 1351 51% BA can be used in combination with e.g. Desmophen® 1300 for the formulation of very fast drying systems. Such systems are used in the furniture industry, among others, where very short drying times and early sandability are required. view less | |
| Desmodur® IL 1351 51% EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL 1351 51% EA is an aromatic polyisocyanate based on toluene diisocyanate. It is a hardener component for fast drying, two-component polyurethane coatings. Desmodur® IL 1351 EA can be used in combination with e.g. Desmophen® 1300 for the formul...view more Desmodur® IL 1351 51% EA is an aromatic polyisocyanate based on toluene diisocyanate. It is a hardener component for fast drying, two-component polyurethane coatings. Desmodur® IL 1351 EA can be used in combination with e.g. Desmophen® 1300 for the formulation of very fast drying systems. Such systems are used in the furniture industry, among others, where very short drying times and early sandability are required. This product has a viscosity at 23°C of 350 ± 50 mPa·s, a flash point of approx. -6°C, and a density at 20°C of approx. 1,12g/ml. view less | |
| Desmodur® IL 1451 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene disocyanate, used as the hardener component for fast-drying two-pack polyurethane coatings. Two-component polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid in...view more Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene disocyanate, used as the hardener component for fast-drying two-pack polyurethane coatings. Two-component polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is of use above all in industrial wood and furniture finishing. This product has a viscosity at 23°C of 250 ± 75 mPa·s, a flash point of approx. 26°C, and a density at 20°C of approx. 1,07 g/ml. view less | |
| Desmodur® IL 1451 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL 1451 BA is an aromatic polyisocyanate based on toluene diisocyanate, used as a hardener component for fast drying, two-component polyurethane coatings. This product has a non-volatile content (0.2g / 6 min / 120°C) of 51.0 ± 2.0%, a monomeric...view more Desmodur® IL 1451 BA is an aromatic polyisocyanate based on toluene diisocyanate, used as a hardener component for fast drying, two-component polyurethane coatings. This product has a non-volatile content (0.2g / 6 min / 120°C) of 51.0 ± 2.0%, a monomeric content of < 0.50%, and an equivalent weight of approx. 570. The two-component polyurethane systems formulated with Desmodur® IL 1451 BA are characterized by their very rapid initial drying and early sandability, making them ideal for the industrial coating of wood and furniture. An NCO/OH ratio of approx. 0.5 - 0.7 is recommended as a function of the reactivity and hardness of the polyol. view less | |
| Desmodur® IL 1451 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL 1451 EA is an aromatic polyisocyanate based on toluene diisocyanate, and is used as a hardener component for fast drying, two-component polyurethane coatings. This product has a density at 20°C of approx. 1,11g/ml, a monomeric TDI (supply for...view more Desmodur® IL 1451 EA is an aromatic polyisocyanate based on toluene diisocyanate, and is used as a hardener component for fast drying, two-component polyurethane coatings. This product has a density at 20°C of approx. 1,11g/ml, a monomeric TDI (supply form) of ≤ 0,5%, and an iodine color value of ≤ 2. The low viscosity and high reactivity of the Desmodur® IL 1451 EA enables the formulation of clear and colored coatings with high solids contents. These can be applied quickly and only a few coats are required. view less | |
| Desmodur® IL BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL BA is an aromatic polyisocyanate resin based on toluene diisocyanate,that is used as the hardener component for fast-drying two-pack polyurethane coatings. This product contains a non-volatile content of 51 ± 2%, an equivalent weight of appro...view more Desmodur® IL BA is an aromatic polyisocyanate resin based on toluene diisocyanate,that is used as the hardener component for fast-drying two-pack polyurethane coatings. This product contains a non-volatile content of 51 ± 2%, an equivalent weight of approx. 525, an density at 20°C of approx. 1.10g/ml. When combined with, for example, Desmophen® 1300, Desmodur® IL BA yields very fast-drying systems. These are used in, for example, the furniture industry where very short drying times and early sandability are required. view less | |
| Desmodur® IL EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL EA is an aromatic polyisocyante resin based on toluylene diisocyanate that is a hardener component for fast-drying two-component polyurethane coatings. It is used in combination with various Baycoll products or other hydroxyl-bearing substanc...view more Desmodur® IL EA is an aromatic polyisocyante resin based on toluylene diisocyanate that is a hardener component for fast-drying two-component polyurethane coatings. It is used in combination with various Baycoll products or other hydroxyl-bearing substances to formulate adhesives. This product has a density at 20°C of approx. 1.12g/ml, an iodine color value of ≤ 4, and an NCO content of 8.0 ± 0.2%. Due to its fast drying, Desmodur® IL EA is mainly used in coatings for on-line application, e.g. in the packaging industry or in industrial furniture finishing. The fast initial drying and early sandability of the coatings allow the application of high-bodied finishes with just a few steps within a short space of time. view less | |
| Desmodur® IL V 170 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL V 170 is an aromatic polyisocyanate based on toluene diisocyanate. It is a hardener component for low VOC, two-component polyurethane coatings. Systems formulated with this product are characterized by their very rapid initial drying, early s...view more Desmodur® IL V 170 is an aromatic polyisocyanate based on toluene diisocyanate. It is a hardener component for low VOC, two-component polyurethane coatings. Systems formulated with this product are characterized by their very rapid initial drying, early sandability, and easy dilution ability, making them ideal for the industrial coating of wood and furniture. view less | |
| Desmodur® L 67 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® L 67 BA is an aromatic polyisocyanate based on toluene diisocyanate. Used to formulate air-drying two-pack polyurethane coatings. It has an NCO content of 11.9 ± 0.4%, a non-volatile content of 67±2%, and a viscosity at 23°C of 600 ± 200 mPa·s, ...view more Desmodur® L 67 BA is an aromatic polyisocyanate based on toluene diisocyanate. Used to formulate air-drying two-pack polyurethane coatings. It has an NCO content of 11.9 ± 0.4%, a non-volatile content of 67±2%, and a viscosity at 23°C of 600 ± 200 mPa·s, and an iodine color value of ≤ 2. Systems crosslinked with Desmodur® L 67 BA can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. view less | |
| Desmodur® L 67 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® L 67 MPA/X is an aromatic polyisocyanate based on toluene diisocyante, used in combination with various Desmopehn® grades or other hydroxyl-bearing substances to formulate air-drying two-pack polyurethane coatings. This product has an equivalent...view more Desmodur® L 67 MPA/X is an aromatic polyisocyanate based on toluene diisocyante, used in combination with various Desmopehn® grades or other hydroxyl-bearing substances to formulate air-drying two-pack polyurethane coatings. This product has an equivalent weight of approx. 350, a flash point of approx. 40°C, and a density at 20°C of approx. 1.15g/ml. Systems crosslinked with Desmodur® L 67 MPA/X can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. view less | |
| Desmodur® L 75 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate, used in combination with Desmophen® grades or other hydroxyl-bearing substances to formulate two-pack polyurethane coatings and adhesives. This product has an equivalent weight of...view more Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate, used in combination with Desmophen® grades or other hydroxyl-bearing substances to formulate two-pack polyurethane coatings and adhesives. This product has an equivalent weight of approx. 315, a flash point of approx. 5°C, and a density at 20°C of approx. 1.17g/ml. Systems crosslinked with Desmodur® L 75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. Desmodur® L 75 is also suitable for room-temperature crosslinking of adhesives based on Desmocoll® or Baycoll®. These can be used to bond many materials, e.g. wood, metal and plastic. The use of this polyisocyanate increases the resistance of the bonds to heat, oil, plasticisers and many solvents. It ensures good adhesion to many materials, especially plastics. view less | |
| Desmodur® LS 2424 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® LS 2424 is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content. It is used in the formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Desmodur® LS 2424 ...view more Desmodur® LS 2424 is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content. It is used in the formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Desmodur® LS 2424 is an isomeric mixture of monomeric diphenylmethane diisocyanate that is liquid at temperatures above 20 °C. Storage and handling are greatly simplified compared to 4,4' isomer that is solid at room temperature (Desmodur® 44 M, Desmodur® 44 MC). This product has a vapor pressure at 20°C (MDI) of < 10^-5 hPa, a phenyl isocyanate content of max. 10ppm, and a degree of purity (MG 250) of min. 99.5% by wt. view less | |
| Desmodur® MT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® MT is a polyisocyanate prepolymer based on diphenylmethane diisocyanate, and is used as a stabilizer for pigmented moisture-curing aromatic one-pack polyurethane coatings. This product has an equivalent weight of approx. 250, a flash point of ap...view more Desmodur® MT is a polyisocyanate prepolymer based on diphenylmethane diisocyanate, and is used as a stabilizer for pigmented moisture-curing aromatic one-pack polyurethane coatings. This product has an equivalent weight of approx. 250, a flash point of approx. 217°C, and a density at 20°C of approx. 1.13g/ml. Desmodur® MT reacts with water to release carbon dioxide. It serves as a dewatering agent to ensure the storage stability of moisture-curing pigmented one-component polyurethane coatings. The stoichiometric conversion of 1g of water requires approx. 28 g of Desmodur® MT. Trials and experience have shown that the best results are obtained using two or three times this amount. The reactivity of Desmodur® MT with water is comparable with the reactivity of the Desmodur® E grades. view less | |
| Desmodur® PF | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur PF is a modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives. It is a solvent-free, colourless to yellowish liq...view more Desmodur PF is a modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives. It is a solvent-free, colourless to yellowish liquid of medium viscosity at temperatures above 20°C that crystallises at lower temperatures. This product has an NCO content of 23.0 ± 0.5%, a viscosity at 25°C of 600 ± 100 mPa·s, a hydrolysable chlorine (Cl) amount of max. 50mg/kg, and a density at 25°C of approx. 1.21g/cm^3. Desmodur® PF can be combined with Desmophen®, Baycoll® or Acclaim® in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® PF is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. view less | |
| Desmodur® T 100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® T 100 is a pure 2,4 ’-toluene diisocyanate (TDI) that is used for polyurethane coatings and adhesives. It is a clear liquid of low viscosity at temperatures above 22°C and crystallizes at lower temperatures. This product has a purity level of ≥ ...view more Desmodur® T 100 is a pure 2,4 ’-toluene diisocyanate (TDI) that is used for polyurethane coatings and adhesives. It is a clear liquid of low viscosity at temperatures above 22°C and crystallizes at lower temperatures. This product has a purity level of ≥ 99.5%, an isocyanate content ≥ 48%, solidification point of approx. 22°C, a viscosity at 25°C of approx. 3 mPa·s, and a hydrolysable chlorine content of ≤ 100mg/kg. view less | |
| Desmodur® T 80 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® T 80 is a 2,4- and 2,6-toluene diisocyanate (TDI) in the ratio 80:20 that is used as a raw material for polyurethane coatings and adhesives.It is a clear liquid of low viscosity at room temperature. It has a content of 2,4'-TDI of 80.5 ± 1%, a b...view more Desmodur® T 80 is a 2,4- and 2,6-toluene diisocyanate (TDI) in the ratio 80:20 that is used as a raw material for polyurethane coatings and adhesives.It is a clear liquid of low viscosity at room temperature. It has a content of 2,4'-TDI of 80.5 ± 1%, a boiling point (1 bar) of approx. 14°C, and a viscosity at 25°C of approx. 3 mPa·s. view less | |
| Desmodur® VH 20 N | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VH 20 N is a polyisocyanate based on diphenylmethane diisocyanate used in combination with polyols to formulate two-component coatings and sealing compounds and to manufacture prepolymers. It is a yellow, solvent-free liquid, with a viscosity 25...view more Desmodur® VH 20 N is a polyisocyanate based on diphenylmethane diisocyanate used in combination with polyols to formulate two-component coatings and sealing compounds and to manufacture prepolymers. It is a yellow, solvent-free liquid, with a viscosity 25°C of 280 ± 80 mPa·s. This product has an NCO content of 24.5 ± 0.5%, a flash point of approx. 195°C, a density at 20°C of approx. 1.21g/ml, and an equivalent weight of 173. view less | |
| Desmodur® VK 5 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VK 5 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI), and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, dark brown liquid of low vis...view more Desmodur® VK 5 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI), and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C that may partially crystallize at lower temperatures. This product has a pot life of 25-35 min., a phenyl isocyanate content of max. 50mg/kg, and a vapor pressure at 20°C (MDI) < 10^-5 hPa. Desmodur® VK 5 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® VK 5 is particularly suitable for combining with Baycoll in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the high vapor pressure of Desmodur® VK 5, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. view less | |
| Desmodur® VKS 10 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VKS 10 is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. It is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). Thi...view more Desmodur® VKS 10 is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. It is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). This product is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C, which may partially crystallise at lower temperatures. This product has a phenyl isocyanate content of max. 50mg/kg, a vapor pressure at 20°C (MDI) < 10^-5 hPa, density at 20°C of approx. 1.2g/cm^3. Desmodur® VKS 10 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. It is particularly suitable for combining with Baycoll in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapour pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. view less | |
| Desmodur® VL | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL is an aromatic polyisocyanate based on diphenylmethane diisocyanate that is used in combination with Desmophen grades in solvent-free two-pack polyurethane coatings, fillers, sealing compounds and synthetic resin mortars. It is a brown, solve...view more Desmodur® VL is an aromatic polyisocyanate based on diphenylmethane diisocyanate that is used in combination with Desmophen grades in solvent-free two-pack polyurethane coatings, fillers, sealing compounds and synthetic resin mortars. It is a brown, solvent-free liquid with a low viscosity (25°C) of 90 ± 20 mPa·s. This product has an NCO of 31.5 ± 0.5%, a flash point of approx. 229°C, and an equivalent weight of approx. 133. Desmodur® VL is combined with, for example, Desmophen® 1145, 1150, 1155, 5028 GT and 1380 BT. Depending on the Desmophen® product used, the coatings yielded can be varied from hard to flexible. It is necessary to add water scavengers such as molecular sieve paste® 3 Å to the polyol component to prevent the undesired reaction of Desmodur® VL with water. Systems formulated with Desmodur® VL are suitable for coating concrete, asphalt, fibrous cement and plastics. view less | |
| Desmodur® VL 2854 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL 2854 is a solvent-free, brown liquid, aromatic polyisocyanate based on diphenylmethane diisocyanate (MDI) used as the hardener component in the formulation of solvent-free polyurethane systems, and also as a raw material for coating resins. T...view more Desmodur® VL 2854 is a solvent-free, brown liquid, aromatic polyisocyanate based on diphenylmethane diisocyanate (MDI) used as the hardener component in the formulation of solvent-free polyurethane systems, and also as a raw material for coating resins. This product has an isocyanate content of 32.5 ± 0.8%, an equivalent weight of approx. 130, and a flash point of > 220°C. view less | |
| Desmodur® VL 50 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL 50 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used in combo with Desmophen grades for self-leveling, two-pack polyurethane coating and sealing compounds, as well as solvent-free, two-pack polyurethane primers and thin...view more Desmodur® VL 50 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used in combo with Desmophen grades for self-leveling, two-pack polyurethane coating and sealing compounds, as well as solvent-free, two-pack polyurethane primers and thin-coat finishes. It is a brown, solvent-free liquid, with a low viscosity of 25°C of 22.5 ± 7.5 mPa·s. This product has an equivalent weight of 129, a flash point of > 200°C, and a density at 20°C of approx. 122g/ml. view less | |
| Desmodur® VL 51 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL 51 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a raw material in the formulation of self-levelling two-component polyurethane coatings and sealing compounds as well as solvent-free two-component polyurethane pr...view more Desmodur® VL 51 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a raw material in the formulation of self-levelling two-component polyurethane coatings and sealing compounds as well as solvent-free two-component polyurethane primers, and also as a component in the formulation of prepolymers. It is a brown liquid with a low viscosity at 25°C of 21.0 ± 5 mPa·s. This product has an acidity (HCI) of < 200mg/kg, an NCO of 32.5 ± 0.8%, and an equivalent weight of approx. 129. Compared with Desmodur® VL, Desmodur® VL 51 has a lower viscosity when mixed with Desmophen® 1145, 1150, 5028 GT and 1380 BT. The end-products are more flexible than combinations with Desmodur® VL. A water scavenger such as molecular sieve paste® 3 Å must be added to the polyol component to prevent any undesired reaction of Desmodur® VL 51 with water. Desmodur® VL 51 is used in the formulation of prepolymers for one- and two-component coatings and for related applications. It has the advantage of easier handling. view less | |
| Desmodur® VL 9010 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL 9010 is an aromatic polyisocyanate based on diphenylmethane diisocyanate that can be used as a raw material for blocked isocyanates. It is a solvent-free, brown liquid with an equivalent weight of approx. 130, a density at 20°C of approx. 1.2...view more Desmodur® VL 9010 is an aromatic polyisocyanate based on diphenylmethane diisocyanate that can be used as a raw material for blocked isocyanates. It is a solvent-free, brown liquid with an equivalent weight of approx. 130, a density at 20°C of approx. 1.21g/ml, and a flash point of approx. 193°C. view less | |
| Desmodur® VL R 10 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL R 10 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used in combination with suitable low-viscosity Desmophen® products to formulate solvent-free spray coatings and sealing compounds. This product is a brown, solvent-free...view more Desmodur® VL R 10 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used in combination with suitable low-viscosity Desmophen® products to formulate solvent-free spray coatings and sealing compounds. This product is a brown, solvent-free liquid with a viscosity at 25°C of 120 ± 20 mPa·s. This product has an isocyanate content of 31.5 ± 1.0%, and equivalent weight of approx. 133, a flash point of approx. 200°C, and a density at 20°C of approx. 1.24g/ml. Desmodur VL R 10 is combined with Desmophen 1150 or a mixture of Desmophen® 1150 and polyethers such as Desmophen® 5028 GT or 1380 BT to formulate coatings varying from flexible to hard. A water scavenger such as molecular sieve paste® 3 Å must be added to prevent any undesired reaction with water. view less | |
| Desmodur® VL R 20 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL R 20 is a brown, solvent-free liquid aromatic polyisocyanate that is based on diphenylmethane diisocyanate. It is used in combination with suitable low-viscosity Desmophen products to formulate solvent-free spray coatings and sealing compound...view more Desmodur® VL R 20 is a brown, solvent-free liquid aromatic polyisocyanate that is based on diphenylmethane diisocyanate. It is used in combination with suitable low-viscosity Desmophen products to formulate solvent-free spray coatings and sealing compounds. This product has an acidity of max. 200ppm HCI, an equivalent weight of approx. 133, and an isocyanate content of 31.5 ± 1.0%. Desmodur® VL R 20 is combined with Desmophen® 1150 or a mixture of Desmophen® 1150 and polyethers such as Desmophen® 5028 GT or 1380 BT to formulate coatings varying from flexible to hard. A water scavenger such as molecular sieve paste® 3 Å must be added to prevent any undesired reaction with water. view less | |
| Desmodur® XP 2551 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® XP 2551 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a hardener primarily for Desmolith® systems. It is a brown, solvent-free, low-viscosity liquid at 25°C of approx. 60 mPa·s. This product has an isocyanate conten...view more Desmodur® XP 2551 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a hardener primarily for Desmolith® systems. It is a brown, solvent-free, low-viscosity liquid at 25°C of approx. 60 mPa·s. This product has an isocyanate content of approx. 32%, an NCO of equivalentweight approx. 131, a flash point of approx. 220°C, and a density at 20°C of approx. 1.23g/ml. view less | |
| Hartben AM 29 | Benasedo | Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethan...view more Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethane coatings with good colour retention, gloss, toughness and hardness. It is recommended for metals and wood. view less | |
| Hartben E 23 | Benasedo | Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast...view more Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast-curing two-component sealers and finishes, by spray or curtain coating machine application, with good "pot-life" and lifting resistance. It has a wide compatibility with nitrocellulose. view less | |
| Hartben SV 100 | Benasedo | Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of ...view more Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of < 0.3%, a color [G.H.] maximum of 1, and a viscosity [G.H.] of Z-Z3. view less | |
| KAPU IL-50 | Keeneyes International Co., Ltd. | KAPU IL-50is an aromatic polyisocyanate based on toluene diisocyanate and dissolved in butyl acetate. It is used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. | |
| KAPU L-75 | Keeneyes International Co., Ltd. | KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral subs...view more KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. These can be used to bond many materials, such as wood, metal and plastic. view less | |
| Millionate® MT | Tosoh Corporation | Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and art...view more Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. view less | |
| Millionate® MT-F | Tosoh Corporation | Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and a...view more Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. view less | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK-HP | S.A.P.I.C.I. SpA | Polurene OK-HP is an aliphatic-aromatic isocyanurate. This product is compatible with aromatic solvents, nitrocellulose, CAB, and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with...view more Polurene OK-HP is an aliphatic-aromatic isocyanurate. This product is compatible with aromatic solvents, nitrocellulose, CAB, and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. view less | |
| Polurene OK.D | S.A.P.I.C.I. SpA | Polurene OK.D is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other s...view more Polurene OK.D is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. view less | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...view more Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. view less | |
| Polurene OK.D.S | S.A.P.I.C.I. SpA | Polurene OK.D.S is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention f...view more Polurene OK.D.S is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. view less | |
| Polurgreen ES.P | S.A.P.I.C.I. SpA | Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linkin...view more Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. view less | |
| Polyisocyanate Sunicure 75 | Suny Chem 烟台信谊化工有限公司 | Polyisocyanate Sunicure 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Sunicure 75 can increase the resistance of the bonds to heat, oil, plasticisers and many solvents. It also offers ...view more Polyisocyanate Sunicure 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Sunicure 75 can increase the resistance of the bonds to heat, oil, plasticisers and many solvents. It also offers good adhesion to many materials, especially plastics. This product is used in producing coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. It can be used to bond many materials, such as wood, metal and plastic. The pale inherent color of Sunicure 75 permits its use in bonding transparent plastic films for packaging. view less | |
| Uronal B 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also ...view more Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also suitable for matt finishes with excellent flowing and good matting agents compatibility. view less | |
| Uronal RA 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal RA 55/50 ABT is an aromatic isocianurate for PU coatings with high reactivity and more flexible than Uronal RA 50/50 ABT. It is suitable for fast drying PU coatings for wood in combination with the polyols (Ftalon). |
