| Borchi® Gol LA 1 | OMG Borchers GmbH | Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used ei...view more Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl-functional polyacrylates and polyesters, primarily polyester melamine or polyester isocyanate systems. In physically drying systems like water-soluble alkyds, polyurethane and acrylate dispersions, this product improves scratch, levelling and slip behaviour. view less | |
| Borchi® Gol LA 10 | OMG Borchers GmbH | Borchi® Gol LA 10 is a pre-diluted surface active agent based on an organo-modified silicone compound. It promotes flow and levelling properties in solvent based coating systems. This product develops a medium surface tension reduction and can be used eit...view more Borchi® Gol LA 10 is a pre-diluted surface active agent based on an organo-modified silicone compound. It promotes flow and levelling properties in solvent based coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl bearing polyacrylates and polyesters , primarily polyester melamine or epoxy systems. Borchi® Gol LA 10 furthermore controls surface levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. view less | |
| Borchi® Gol LA 2 | OMG Borchers GmbH | Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension r...view more Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. Borchi® Gol LA 2 is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints like hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine or epoxy systems. It also supports levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. This product is especially recommended in systems where solvent-free additives or certain solvents are required. To facilitate incorporation ability it may be helpful to dissolve Borchi® Gol LA 2 in solvents glycol-, aliphatic-, aromatic-, or ester-based. view less | |
| Borchi® Gol LA 20 | OMG Borchers GmbH | Borchi® Gol LA 20 is a pre-diluted, highly efficient organo-modified silicone compound to improve surface properties during and after application. This product reduces surface damage like pin holes and craters. It is characterized by good binder compati...view more Borchi® Gol LA 20 is a pre-diluted, highly efficient organo-modified silicone compound to improve surface properties during and after application. This product reduces surface damage like pin holes and craters. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine, epoxy and certain UV systems. It also controls surface effects in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. view less | |
| Borchi® Gol LA 30 | OMG Borchers GmbH | Borchi® Gol LA 30 is a pre-diluted, highly efficient organo-modified silicone compound used to improve surface properties during and after application. This product will positively influence flow and levelling properties and formation of pin holes and cra...view more Borchi® Gol LA 30 is a pre-diluted, highly efficient organo-modified silicone compound used to improve surface properties during and after application. This product will positively influence flow and levelling properties and formation of pin holes and craters will be reduced. It can be used either for clearcoats or for pigmented coating systems. view less | |
| Borchi® Gol LA 6 | OMG Borchers GmbH | Borchi® Gol LA 6 is a pre-diluted, highly efficient organo-modified silicone compound to improve wetting ability on critical substrates. Furthermore, flow and leveling properties will be positively influenced.This product develops a strong surface tension...view more Borchi® Gol LA 6 is a pre-diluted, highly efficient organo-modified silicone compound to improve wetting ability on critical substrates. Furthermore, flow and leveling properties will be positively influenced.This product develops a strong surface tension reduction and can be used either for clearcoats or for pigmented coating systems. This product favourably controls optical film appearance with reduced haze and increased gloss. view less | |
| BRB Siloen® WA 264 | BRB International BV | BRB Siloen® WA 264 is a polyether-modified siloxane. It is a silicone surfactant for aqueous coatings with excellent wetting and levelling properties. | |
| BYK®-302 | BYK 毕克 | BYK®-302 is a polyether modified polydimethylsiloxane. This product is a solvent-free version of BYK-300. This product is especially used in systems in which solvent-free additives are requested or where a requirement for a special solvent exists. | |
| BYK®-307 | BYK 毕克 | BYK®-307 is a polyether modified polydimethylsiloxane. This product has features similar to BYK-306. Due to the fact that it is solvent-free, it is preferred in systems where solvent-free additives are requested or where a requirement for a special solven...view more BYK®-307 is a polyether modified polydimethylsiloxane. This product has features similar to BYK-306. Due to the fact that it is solvent-free, it is preferred in systems where solvent-free additives are requested or where a requirement for a special solvent exists. view less | |
| BYK®-310 | BYK 毕克 | BYK®-310 is a solution of a polyester modified polydimethylsiloxane. This product is a heat resistant silicone additive, i.e., in contrast to conventional (polyether modified) silicones, it shows no thermal decomposition at temperatures between 150°C/302°...view more BYK®-310 is a solution of a polyester modified polydimethylsiloxane. This product is a heat resistant silicone additive, i.e., in contrast to conventional (polyether modified) silicones, it shows no thermal decomposition at temperatures between 150°C/302°F and 230°C/446°F. Thus, upon the recoating baking systems, no loss in adhesion and no surface defects occur. (Note: The aforementioned defects can be caused by the decomposition products of conventional silicones at temperatures above 150°C/302°F.) The effective substance of BYK-310 is listed in title 21 CFR (food and drugs) § 175.300, Indirect Food Additives, Adhesives and Components of Coatings. The usage level may not exceed 0,1% (delivery form based on total formulation) and the film thickness may not exceed 12 µm. view less | |
| BYK®-331 | BYK 毕克 | BYK®-331 is a polyether modified polydimethylsiloxane. This product is used in all solvent-borne, solvent-free and aqueous coatings. In two-component polyurethane systems, it can also be added to the isocyanate hardener. | |
| BYK®-333 | BYK 毕克 | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less | |
| BYK®-370 | BYK 毕克 | BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethan...view more BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine, self-crosslinking acrylates, and epoxies. BYK-370 increases the surface slip. view less | |
| BYK®-377 | BYK 毕克 | BYK®-377 is a polyether modified polydimethylsiloxane. The product improves substrate wetting and leveling at low dosages. In most cases only half the amount of a conventional silicone is needed to optimize substrate wetting, slip and tape release of UV c...view more BYK®-377 is a polyether modified polydimethylsiloxane. The product improves substrate wetting and leveling at low dosages. In most cases only half the amount of a conventional silicone is needed to optimize substrate wetting, slip and tape release of UV curable, 2 pack PU, polyester/melamine and aqueous topcoats. Due to the good compatibility in common binder systems, the production of highly transparent varnishes is possible. Typically it does not cause turbidity in clearcoats. Sanding is required for recoat adhesion. The OH groups of BYK-377 can react with polyisocyanates view less | |
| BYK®-SILCLEAN 3720 | BYK 毕克 | BYK®-SILCLEAN 3720 is a surface additive used to improve surface cleanability. It is a solution of a polyether modified hydroxy functional polydimethylsiloxane. In many paint systems BYK-SILCLEAN 3700 and BYK-SILCLEAN 3720 provide an increase of hydrophob...view more BYK®-SILCLEAN 3720 is a surface additive used to improve surface cleanability. It is a solution of a polyether modified hydroxy functional polydimethylsiloxane. In many paint systems BYK-SILCLEAN 3700 and BYK-SILCLEAN 3720 provide an increase of hydrophobicity and oleophobicity. Water- and oil-repellency are both significantly improved. Additionally, these additives improve dirt release and ease of cleaning of the coating surface. view less | |
| BYK®-UV 3510 | BYK 毕克 | BYK®-UV 3510 is a surface additive for radiation curing systems. It is a polyether modified polydimethylsiloxane. In non-aqueous systems BYK-UV 3510 improves substrate wetting and tape release as well as leveling, and increases surface slip. | |
| BYK®-UV 3530 | BYK 毕克 | BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueou...view more BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueous radiation curable systems leveling is improved. The surface tension, foam behavior or transparency are scarcely influenced. view less | |
| DISPERBYK®-108 | BYK 毕克 | DISPERBYK®-108 is a wetting and dispersing additive for solvent-borne and solvent-free systems. It is a hydroxyfunctional carbocylic acid ester with pigment affinic groups. s the solvent-free version of DISPERBYK®-107. Therefore it is especially suitable ...view more DISPERBYK®-108 is a wetting and dispersing additive for solvent-borne and solvent-free systems. It is a hydroxyfunctional carbocylic acid ester with pigment affinic groups. s the solvent-free version of DISPERBYK®-107. Therefore it is especially suitable for the production of flood/float-free high-solids and aromatic-free decorative and architectural paints. DISPERBYK®-108 is successfully utilized in the production of solvent-borne pigment concentrates for architectural paints. view less | |
| Dynasylan® 1505 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the modification...view more Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the modification of polymers. view less | |
| Dynasylan® 2201 EQ | Evonik Operations GmbH, BL Silanes | Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.The dual nature of its reactivity allows Dynasylan® 2201 EQ to bind chemically to both inorganic materials (e.g....view more Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.The dual nature of its reactivity allows Dynasylan® 2201 EQ to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic olymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter and as a surface modifier. Dynasylan® 2201 EQ is a 50% solution of silane in methanol, is a colorless liquid with an alcohol-like odor and is soluble in alcohols, ketones, esters or aromatic hydrocarbons. Due to novel patented process, Dynasylan® 2201 EQ is the first ureidofunctional silane, which contains no carcinogenic by-products, e.g. ethylcarbamate. Dynasylan® 2201 EQ is therefore not classified as "carcinogenic, class 2". view less | |
| Dynasylan® F 8815 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8815 is a fluoroalkylfunctional water-borne oligosiloxane which acts as an oleophobic surface modification agent on oxidic, carboxy- and hydroxyfunctional substrates for example ceramic or natural fibers like cotton or leather. | |
| Dynasylan® HYDROSIL 2627 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2627 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| DYNASYLAN® HYDROSIL 2926 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2926 is a water-borne inorganic binder for high temperature inorganic coatings. | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...view more Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. view less | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| EMULTROL DFM CP-1 | Concentrol, S.A., Productos | EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems. | |
| FY-4902 Silicone Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4902 Silicone Surfactant appears as a yellowish, transparent liquid. This product is a nonionic surfactant, and is designed to increase wetting, spreading, and dispersion properties. It can be used in inks and coating applications. | |
| FY-4903 Silicon Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating ...view more FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating applications. view less | |
| Greesol™ F06 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, a...view more Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. view less | |
| Hydropalat® WE 3240 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3240 (formerly Hydropalat® 140) is a low-foam flow promoter and substrate wetting agent for aqueous paints and coatings is based on organo modified polysiloxane. Compared with substrate wetting agents based on other chemicals, Hydropalat® W...view more Hydropalat® WE 3240 (formerly Hydropalat® 140) is a low-foam flow promoter and substrate wetting agent for aqueous paints and coatings is based on organo modified polysiloxane. Compared with substrate wetting agents based on other chemicals, Hydropalat® WE 3240 brings about a much greater reduction in static interfacial tension. Even when it is present in a concentration of 0.5%, values much lower than 25 mN/m can be achieved. view less | |
| ORDISOL SWT-01 | Concentrol, S.A., Productos | ORDISOL SWT-01 is a silicone surfactant for application in aqueous systems. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. | |
| ORDISOL SWT-01 R | Concentrol, S.A., Productos | ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surf...view more ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-01 Rs low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-03 | Concentrol, S.A., Productos | ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for ...view more ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for wood and furniture, and varnishes. view less | |
| ORDISOL SWT-04 | Concentrol, S.A., Productos | ORDISOL SWT-04 is a silicone based additive for waterborne formulations of finishing auxiliaries. | |
| ORDISOL SWT-05 | Concentrol, S.A., Productos | ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides a...view more ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides an additional anti-blocking effect. view less | |
| ORDISOL SWT-06 | Concentrol, S.A., Productos | ORDISOL SWT-06 is a silicone additive for use in the coatings industry. It is highly effective, compatible, and offers an improvement to scratch resistance. | |
| ORDISOL SWT-07 | Concentrol, S.A., Productos | ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coat...view more ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coating systems. view less | |
| ORDISOL SWT-10 | Concentrol, S.A., Productos | ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scra...view more ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scratch resistance. view less | |
| ORDISOL SWT-11 | Concentrol, S.A., Productos | ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfa...view more ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-11s low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-13 | Concentrol, S.A., Productos | ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Béna...view more ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. It is recommended for use in all systems where solvent-free additives are required. view less | |
| ORDISOL SWT-13 XI | Concentrol, S.A., Productos | ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and ...view more ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-13 XI is recommended for use in solvent systems. view less | |
| ORDISOL SWT-13-100 | Concentrol, S.A., Productos | ORDISOL SWT-13-100 is a silicone additive. It provides improved slippage, leveling, and anti-blocking properties. ORDISOL SWT-13-100 is recommended for use in all systems where solvent-free additives are required or special solvents are required. | |
| ORDISOL SWT-14 | Concentrol, S.A., Productos | ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-15 | Concentrol, S.A., Productos | ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-16 | Concentrol, S.A., Productos | ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-17 | Concentrol, S.A., Productos | ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface de...view more ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface defects, and provides wear and scratch resistance. view less | |
| ORDISOL SWT-18 | Concentrol, S.A., Productos | ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suit...view more ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suitable in aqueous systems containing a small amount of organic co-solvent. view less | |
| ORDISOL SWT-24 | Concentrol, S.A., Productos | ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-...view more ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. view less | |
| ORDISOL SWT-31 | Concentrol, S.A., Productos | ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking pro...view more ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyethers are additives with great ease of use. Problems associated with the use of silicone oils (PDMS) are not encountered with these additives. No contamination problems or surface defects are expected with the use of these additives. view less | |
| ORDISOL SWT-33 | Concentrol, S.A., Productos | ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight...view more ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV curing systems. In all the previous applications offers a strong decrease of the surface tension. view less | |
| ORDISOL SWT-400 | Concentrol, S.A., Productos | ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide r...view more ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide range of organic surfactants. Perfectly compatible with polyurethane coatings in which it offers anti-blocking properties and improves abrasion resistance. view less | |
| ORDISOL SWT-45 | Concentrol, S.A., Productos | ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and wa...view more ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer coatings. view less | |
| ORDISOL SWT-57 | Concentrol, S.A., Productos | ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL...view more ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL SWT-57 can be repainted in most cases. view less | |
| Raybo 111 Powder Additive | Raybo Chemical | Raybo 111 Powder Additive is a polysilicone glycol surfactant on an inert amorphous silica base in a free-flowing white powder form. This product is most commonly used as a wetting agent in epoxy primer and topcoat applications. | |
| Silane USi-1301 | Nanjing Union Silicon Chemical Co., Ltd. | Silane USi-1301 is an amino-functional alkoxysilane. This colorless, transparent liquid is used as a surface modifier in pigments and fillers as well as an adhesion promoter in primers for the Adhesive and Sealants Industry. | |
| Silane USi-1302 | Nanjing Union Silicon Chemical Co., Ltd. | Silane USi-1302 is an amino-functional alkoxysilane. This colorless, transparent liquid can be used as an adhesion promoter as well as a surface modifier in pigments and fillers. | |
| Silane USi-6802 | Nanjing Union Silicon Chemical Co., Ltd. | Silane USi-6802 is an essential alkyl silane. This product appears as a colorless, transparent liquid. It can be used as a surface-modifying coating on concrete, glass, inorganic pigments, or mineral fillers in order to generate hydrophobicity. | |
| Slip CFCⓇ-702 | CHEONGWOO CFC CO., LTD. | Slip CFCⓇ-702 is a modified polysiloxane levelling and slip additive for water-based and organic solvent systems. This clear liquid improves slip and prevents blocking, improves leveling and prevents benard cell, and improves gloss in coatings. It finds a...view more Slip CFCⓇ-702 is a modified polysiloxane levelling and slip additive for water-based and organic solvent systems. This clear liquid improves slip and prevents blocking, improves leveling and prevents benard cell, and improves gloss in coatings. It finds application in acrylic and alkyd air drying systems, in solvent and solvent free based epoxy and urethane coatings, in acrylic urethane and industrial baking systems, and in ink and water based, water soluble coatings. view less | |
| Slip CFCⓇ-710 | CHEONGWOO CFC CO., LTD. | Slip CFCⓇ-710 is a polyether modified levelling and slip additive for organic solvent systems. This clear, viscous liquid improves gloss for coatings, prevents silking in baking systems, and improves heat resistance and hydrolysis resistance in films. It ...view more Slip CFCⓇ-710 is a polyether modified levelling and slip additive for organic solvent systems. This clear, viscous liquid improves gloss for coatings, prevents silking in baking systems, and improves heat resistance and hydrolysis resistance in films. It finds application in automotive and refinish coating systems, in wood coatings based on polyurethane, in coil and can coating systems, and in general industrial high temperature baking systems. view less | |
| Slip CFCⓇ-720 | CHEONGWOO CFC CO., LTD. | Slip CFCⓇ-720 is a polyether levelling and slip additive for water-based and organic solvent systems. This clear liquid prevents blocking in drying films, improves floss in automotive coating systems, improves DOI and has anti-cratering properties. It fin...view more Slip CFCⓇ-720 is a polyether levelling and slip additive for water-based and organic solvent systems. This clear liquid prevents blocking in drying films, improves floss in automotive coating systems, improves DOI and has anti-cratering properties. It finds application in water based air drying and baking systems, in acrylic urethane and acrylic air drying systems, in acrylic and polyester high temperature baking system, and in solvent and solvent free based epoxy coatings. view less | |
| Slip CFCⓇ-733 | CHEONGWOO CFC CO., LTD. | Slip CFCⓇ-733 is a polyether modified levelling and slip additive for water-based and organic solvent systems. This clear, viscous liquid prevents pinhole, cratering, and orange peel, and has wetting performance for various substrates. It finds applicatio...view more Slip CFCⓇ-733 is a polyether modified levelling and slip additive for water-based and organic solvent systems. This clear, viscous liquid prevents pinhole, cratering, and orange peel, and has wetting performance for various substrates. It finds application in water dispersing systems and water soluble coatings neutralized with amine, in solvent and solvent free based epoxy and polyurethane coatings, and in acrylic urethane and acrylic baking systems. view less | |
| Surfadol® 541S Surfactant | ACME 艾克米 | Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other sys...view more Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other systems. Surfadol® 541S is without APEO and non-toxic. view less | |
| TEGO® Twin 4100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Twin 4100 is a highly effective siloxane-based gemini surfactant. It is a clear to hazy liquid. The haziness of the liquid has no affect on the product's properties. TEGO® Twin 4100 has excellent substrate wetting and anti-crater effects for wood an...view more TEGO® Twin 4100 is a highly effective siloxane-based gemini surfactant. It is a clear to hazy liquid. The haziness of the liquid has no affect on the product's properties. TEGO® Twin 4100 has excellent substrate wetting and anti-crater effects for wood and furniture coatings, industrial coatings, printing inks, overprint varnishes, and polymer emulsions. It has good long-term persistance and no foam stabilization. view less | Request Sample |
| TOYNOL® DF-70 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...view more TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 30% active content and is slightly soluble in water. view less | |
| TOYNOL® DF-72 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...view more TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 37% active content and is slightly soluble in water. view less | |
| YCK-1110 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1110 has a transparent liquid appearance, with a non-volatile matter of 100%, a density at 25℃ of 1.04 g/cm^3, a refractive index (25℃) of 1.453, and a flash point of >110℃. This product provides excellent leveling, good recoatability, quick wetting, ...view more YCK-1110 has a transparent liquid appearance, with a non-volatile matter of 100%, a density at 25℃ of 1.04 g/cm^3, a refractive index (25℃) of 1.453, and a flash point of >110℃. This product provides excellent leveling, good recoatability, quick wetting, and penetrating to substrate and dispersibility. It has applications for waterbourne coatings, industrial coatings, furniture coatings, automotive coatings, and printing inks. view less | |
| YCK-1140 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1140 has a transparent liquid appearance, with solvent of diproplylene glycol monomethylether. It has a density at 25℃ of 0.99 g/cm^3, non-volatile matter of 52%, a flash point of 86℃, and a refractive index (25℃) of 1.442. This product has applicatio...view more YCK-1140 has a transparent liquid appearance, with solvent of diproplylene glycol monomethylether. It has a density at 25℃ of 0.99 g/cm^3, non-volatile matter of 52%, a flash point of 86℃, and a refractive index (25℃) of 1.442. This product has applications for automotive coatings, industrial coatings, furniture coatings, coil coatings, and printing inks. YCK-1140 helps improve flow and leveling, improve surface slip, scratch resistance and block resistance, and improve creditability to dust and spray. It offers quick substrate wetting, good crater resistance, leveling thicker coating on the vertical surface, has great compatibility and does not easily produce cloudiness. This product helps to reduce sensitivity of wood coating and furniture finish to air flow, prevent formation of Bernard cell, and improve the orientation of flatting agents. view less | |
| YCK-1150 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1150 has a milky white liquid appearance, with a density at 25℃ of 1.04 g/cm^3, non-volatile matter of 60%, and a pH level of 7-8. This product has applications for printing inks. It has good emulsion stability, provides good wetting effect, improves ...view more YCK-1150 has a milky white liquid appearance, with a density at 25℃ of 1.04 g/cm^3, non-volatile matter of 60%, and a pH level of 7-8. This product has applications for printing inks. It has good emulsion stability, provides good wetting effect, improves gloss, improves lithography efficiency with antistatic, anti-blocking and scratch resistant function, as well as forming film of thermal stability. view less | |
| YCK-1170 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1170 is a transparent liquid, with a xylene solvent, and applications for printing inks, coil coatings, furniture coatings, industrial coatings and automotive coatings. It has a density at 25℃ of 0.88 g/cm^3, non-volatile matter of 10%, a flash point ...view more YCK-1170 is a transparent liquid, with a xylene solvent, and applications for printing inks, coil coatings, furniture coatings, industrial coatings and automotive coatings. It has a density at 25℃ of 0.88 g/cm^3, non-volatile matter of 10%, a flash point of 28℃, and a refractive index (25℃) of 1.92. This product offers improved gloss, slipping, leveling, wetting, flow properties and anti-blocking. YCK-1170 increases scratch and mar resistance, prevents pigment separation, improves performance of artificial leather in the hand feel, has no adverse impact on paint film, and has no negative impact on interlayer adhesion. view less | |
| YCK-1230 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1230 has a light yellow transparent liquid appearance, with a non-volatile matter of 100%, a flash point of >59℃, density at 25℃ of 1.05 g/cm^3, and a refractive index (25℃) of 1.450. It has applications for coil coatings, furniture coatings, industri...view more YCK-1230 has a light yellow transparent liquid appearance, with a non-volatile matter of 100%, a flash point of >59℃, density at 25℃ of 1.05 g/cm^3, and a refractive index (25℃) of 1.450. It has applications for coil coatings, furniture coatings, industrial coatings and automotive coatings. This product provides good substrate wetting by reduction of surface tension of the coatings, improve surface slip, scratch resistance and block resistance, as well as improve leveling, gloss, and prevent Bernard cell. view less | |
| YCK-1240 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1240 has a transparent liquid appearance and a xylene/isobutyl alcohol solvent, with a non-volatile matter of 52%, a flash point of 25℃, density at 25℃ of 0.98 g/cm^3, and a refractive index (25℃) of 1.465. It has applications for coil coatings, furni...view more YCK-1240 has a transparent liquid appearance and a xylene/isobutyl alcohol solvent, with a non-volatile matter of 52%, a flash point of 25℃, density at 25℃ of 0.98 g/cm^3, and a refractive index (25℃) of 1.465. It has applications for coil coatings, furniture coatings, industrial coatings and automotive coatings. This product improves surface slip, leveling and gloss, prevent formation of Bernard cells, and improve scratch resistance and anti-blocking. view less | |
| YCK-1250 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1250 has a light yellow transparent liquid appearance, with a non-volatile matter of 100%, a flash point of 66℃, density at 25℃ of 1.05 g/cm^3, and a refractive index (25℃) of 1.435. It has applications for furniture coatings, industrial coatings and ...view more YCK-1250 has a light yellow transparent liquid appearance, with a non-volatile matter of 100%, a flash point of 66℃, density at 25℃ of 1.05 g/cm^3, and a refractive index (25℃) of 1.435. It has applications for furniture coatings, industrial coatings and automotive coatings. This product provides good substrate wetting even of critical substrates and good anti-crater performance by reduction of surface tension of the coatings. It helps to improve surface slip, scratch resistance and block resistance. It improves spray effect, prevents Bernard cell, and improves the orientation of flatting agent. view less | |
| YCK-5030 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-5030 is a high efficient surfactant of polysiloxane that improves surface smoothness and hand feel. It improves scratch resistance and hardness, and has good compatibility and recoatability. This product has non-volatile matter of 50%, a density of 0....view more YCK-5030 is a high efficient surfactant of polysiloxane that improves surface smoothness and hand feel. It improves scratch resistance and hardness, and has good compatibility and recoatability. This product has non-volatile matter of 50%, a density of 0.88g/cm^3 at 25℃, and a flash point of 62℃. Its main application is in furniture coatings, but it is also excellent for automotive coatings, industrial coatings, and printing inks. view less |
