| 3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) | Kowa American Corporation | 3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) is a low viscosity, low odor and excellent solvency monomer containing a light stable cyclic group. TMCHMA is useful in paints, adhesives, sealants, water treatment & other similar applications. TMCHMA provi...もっと表示する 3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) is a low viscosity, low odor and excellent solvency monomer containing a light stable cyclic group. TMCHMA is useful in paints, adhesives, sealants, water treatment & other similar applications. TMCHMA provides impact, chemical, water, weather & abrasion resistance as well as low shrinkage, thermal stability & adhesion. 表示を減らす | Request Sample |
| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...もっと表示する 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. 表示を減らす | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...もっと表示する 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 表示を減らす | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...もっと表示する 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. 表示を減らす | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| AB-70F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-70F is NMP free aliphatic urethane dispersion with good gloss, flow, water resistance, adhesion, tough, flexible, and is applicable in mold coatings. It is applicable for numerous different coatings such as, plastic, industrial, and more. | |
| AB-72FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. | |
| AB-91F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more. | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...もっと表示する Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. 表示を減らす | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...もっと表示する Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...もっと表示する Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...もっと表示する Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...もっと表示する Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...もっと表示する Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...もっと表示する Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...もっと表示する Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 表示を減らす | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...もっと表示する Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 表示を減らす | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...もっと表示する Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 表示を減らす | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...もっと表示する Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 表示を減らす | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...もっと表示する Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 表示を減らす | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| ACMO | Rahn USA Corp. | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...もっと表示する ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. 表示を減らす | Request Sample |
| ACRONAL® PRO 761 | BASF Dispersions & Resins | Acronal® PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corro...もっと表示する Acronal® PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corrosion protection pigments and extenders allows systems to be formulated with outstanding corrosion protection properties.This product is recommended for applications such as interior/exterior general industrial metal coating applications and industrial maintenance applications. 表示を減らす | |
| ACRONAL® PRO 770 NA | BASF Dispersions & Resins | ACRONAL® PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONALPRO 770 shows outstanding anti-corrosiv...もっと表示する ACRONAL® PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONALPRO 770 shows outstanding anti-corrosive properties both in glossy DTM and matte monocoat/ primer applications without or with only limited addition of phosphate anticorrosive pigments. 表示を減らす | |
| AMBERLAC® 13-031 | Polynt Composites | AMBERLAC® 13-031 is a styrene-modified alkyd resin that can be used in primers, hammertone finishes, and general air-dry or baking industrial enamel applications. This product features good color retention, hardness, and adhesion, and dries quickly. | |
| AMBERLAC® 13-038 | Polynt Composites | AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P naphtha that can be used in aerosol finishes, toy enamels, coatings for plastics, and industrial primers and topcoats. This product provides good gloss and color with a tolerance for alip...もっと表示する AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P naphtha that can be used in aerosol finishes, toy enamels, coatings for plastics, and industrial primers and topcoats. This product provides good gloss and color with a tolerance for aliphatic solvents. It has a low viscosity for one-coat finishes. 表示を減らす | |
| AMBERLAC® 3755-X-80 | Polynt Composites | AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin that can be used in high-solids metal finishes, drum enamels, aerosol coatings, sanding sealers, coatings for toys, and other fast air-dry industrial finishes. This product has...もっと表示する AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin that can be used in high-solids metal finishes, drum enamels, aerosol coatings, sanding sealers, coatings for toys, and other fast air-dry industrial finishes. This product has high gloss, good color retention and dries rapidly. The end product will have a hard film. 表示を減らす | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 表示を減らす | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 表示を減らす | |
| AROFLINT® 252-Z1-60 | Polynt Composites | AROFLINT® 252-Z1-60 is a high acid-value polyester resin. This product is designed to be used in combination with an oxirane-modified ester in order to yield high-performance coatings in tools and implements, marine or industrial maintenance finishes, por...もっと表示する AROFLINT® 252-Z1-60 is a high acid-value polyester resin. This product is designed to be used in combination with an oxirane-modified ester in order to yield high-performance coatings in tools and implements, marine or industrial maintenance finishes, porcelain and bathtub refinishes, or transportation and aerospace applications, among other uses. It features high gloss and depth of image for a "wet" look, with a wide formulating latitude in a tough, abrasion-resistant film. 表示を減らす | |
| AROFLINT® D808-XD-71 | Polynt Composites | AROFLINT® D808-XD-71 is a high acid-value polyester resin in an aromatic solvent blend. This product is used in combination with an oxirane-modified ester in order to yield high performance coatings in tools and implements, marine or industrial maintenanc...もっと表示する AROFLINT® D808-XD-71 is a high acid-value polyester resin in an aromatic solvent blend. This product is used in combination with an oxirane-modified ester in order to yield high performance coatings in tools and implements, marine or industrial maintenance finishes, porcelain or bathtub refinishes, and transportation or aerospace applications, among other uses. This product features high gloss and depth of image for a "wet look," with a wide formulating latitude in a tough, abrasion-resistant film. 表示を減らす | |
| AROLON® 559-G4-70 | Polynt Composites | AROLON® 559-G4-70 is a non-oxidizing, water-dispersible acrylic resin that can be used in exterior durable baking enamels, non-yellowing clear coatings, and industrial topcoats. This product reduces faster with solids and offers good chemical and stain re...もっと表示する AROLON® 559-G4-70 is a non-oxidizing, water-dispersible acrylic resin that can be used in exterior durable baking enamels, non-yellowing clear coatings, and industrial topcoats. This product reduces faster with solids and offers good chemical and stain resistance, and wets pigments very well. The end product will develop a high gloss. 表示を減らす | |
| AROLON® 5900 | Polynt Composites | AROLON® 5900, in the form of a translucent to milky white liquid, is an acrylic polyol emulsion polymer that should be reacted with polyisocyanate. It can be used in industrial maintenance topcoats, light industrial topcoats, rail car topcoats, and DOT to...もっと表示する AROLON® 5900, in the form of a translucent to milky white liquid, is an acrylic polyol emulsion polymer that should be reacted with polyisocyanate. It can be used in industrial maintenance topcoats, light industrial topcoats, rail car topcoats, and DOT topcoats. This product has high gloss, good chemical, water, and humidity resistance, with UV stability and UV inhibitors. 表示を減らす | |
| AROLON® 6436 | Polynt Composites | AROLON® 6436 is an acrylic polyol resin designed for use in high solids, high-performance polyurethane coatings, such as industrial maintenance topcoats, light industrial topcoats, OEM coatings, railcar topcoats, or off-road equipment. This product featur...もっと表示する AROLON® 6436 is an acrylic polyol resin designed for use in high solids, high-performance polyurethane coatings, such as industrial maintenance topcoats, light industrial topcoats, OEM coatings, railcar topcoats, or off-road equipment. This product features high gloss, good chemical resistance, with weatherability properties in an economical coating formulation. 表示を減らす | |
| AROLON® 6473 | Polynt Composites | AROLON® 6473, in the form of a clear liquid, is an acrylic polyol resin designed for used in high-performance, two-component polyurethane coatings. This product can be used in aerospace coatings, industrial maintenance coatings, high performance clear coa...もっと表示する AROLON® 6473, in the form of a clear liquid, is an acrylic polyol resin designed for used in high-performance, two-component polyurethane coatings. This product can be used in aerospace coatings, industrial maintenance coatings, high performance clear coats and pigmented topcoats, and automotive refinishes, among other uses. This product features chemical, scratch, and impact resistance, dries quickly, and is UV-durable. 表示を減らす | |
| Aspartic Ester Resin Sunaspar SN220 | Yantai Suny Chem International Co., Ltd. | Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light cor...もっと表示する Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light corrosion protection, bubble landscape coating, fan blade coating and concrete water proofing materials. 表示を減らす | |
| Aspartic Ester Resin Sunaspar SN520 | Yantai Suny Chem International Co., Ltd. | Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent ha...もっと表示する Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent hardness, fullness, leveling and gloss properties. It also has good resistance to weather, solvents, acids and alkalies and saline water. This product is widely used in automobile, industrial, and anti-corrosion paints. 表示を減らす | |
| BASONAT® HB 275 B | BASF Dispersions & Resins | Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical pro...もっと表示する Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical properties, and non-yellowing. Basonat® HB 275 B is used to formulate lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or plastics. 表示を減らす | |
| BECKOSOL® 11-035 | Polynt Composites | BECKOSOL® 11-035 is a soy-based medium-oil alkyd that can be used in industrial primers and enamels, roller coating enamels, structural steel paints, and architectural enamels. This product is water-resistant and features good pigment-wetting properties w...もっと表示する BECKOSOL® 11-035 is a soy-based medium-oil alkyd that can be used in industrial primers and enamels, roller coating enamels, structural steel paints, and architectural enamels. This product is water-resistant and features good pigment-wetting properties with good durability. 表示を減らす | |
| BECKOSOL® 11-070 | Polynt Composites | BECKOSOL® 11-070 is a medium-oil soy/linseed alkyd designed to meet the resin requirements of Federal Specification TT-R-266 Type III. This product can be used in industrial primers and enamels, farm equipment finishes, and grinding vehicles. It features ...もっと表示する BECKOSOL® 11-070 is a medium-oil soy/linseed alkyd designed to meet the resin requirements of Federal Specification TT-R-266 Type III. This product can be used in industrial primers and enamels, farm equipment finishes, and grinding vehicles. It features good pigment wetting properties, with good flow, leveling, gloss, and gloss retention. 表示を減らす | |
| BECKOSOL® 12-054 | Polynt Composites | BECKOSOL® 12-054 is a high-viscosity, short oil TOFA alkyd that can be used in high-quality industrial baking primers and enamels. This product features good initial color and color retention, with a high reduction viscosity and exterior durability. | |
| BECKOSOL® 12107-X-60 | Polynt Composites | BECKOSOL® 12107-X-60 is a chain-stopped alkyd that can be used in air-dry or low-bake industrial enamels. This product features good color and color retention, with good chemical resistance. It has a fast dry or conversion rate. | |
| BECKOSOL® 2575-T-60 | Polynt Composites | BECKOSOL® 2575-T-60 is a short-oil, non-drying coconut oil alkyd resin. This product imparts hardness, flexibility, durability, high gloss, and retention of color to industrial finishes. It is compatible with a variety of standard modifiers and can be use...もっと表示する BECKOSOL® 2575-T-60 is a short-oil, non-drying coconut oil alkyd resin. This product imparts hardness, flexibility, durability, high gloss, and retention of color to industrial finishes. It is compatible with a variety of standard modifiers and can be used in high-gloss baking enamels, exterior enamels and lacquers, furniture lacquers, and enamels for metal equipment or fixtures. It can also be used as a plasticizer for nitrocellulose, cellulose acetate butyrate, or vinyl lacquers. 表示を減らす | |
| BECKOSOL® 6421-X-75 | Polynt Composites | BECKOSOL® 6421-X-75 is a short-oil, high solids, chain-stopped alkyd in a xylene solution that can be used in industrial maintenance finishes, aerosol enamels, lacquer modifiers, fast air-dry primers and shopcoats, and finishes for farm, road, or construc...もっと表示する BECKOSOL® 6421-X-75 is a short-oil, high solids, chain-stopped alkyd in a xylene solution that can be used in industrial maintenance finishes, aerosol enamels, lacquer modifiers, fast air-dry primers and shopcoats, and finishes for farm, road, or construction equipment, among other uses. 表示を減らす | |
| BECKOSOL® 6423-A4K4-75 | Polynt Composites | BECKOSOL® 6423-A4K4-75 is a high-solids, chain-stopped short-oil alkyd resin supplied at 75% non-volatiles in n-butyl acetate and methyl amyl ketones. This product does not contain HAPs. It can be used in industrial maintenance primers and topcoats, as we...もっと表示する BECKOSOL® 6423-A4K4-75 is a high-solids, chain-stopped short-oil alkyd resin supplied at 75% non-volatiles in n-butyl acetate and methyl amyl ketones. This product does not contain HAPs. It can be used in industrial maintenance primers and topcoats, as well as air-dry and force-dry finishes for farm implements, refinishes, and general industrial uses. This product dries rapidly, and the end product will have good humidity resistance and gloss retention. 表示を減らす | |
| BECKOSOL® 663-X-50 | Polynt Composites | BECKOSOL® 663-X-50 is a short oil, rosin and phenolic modified, oxidizing alkyd solution available in xylene. It can be used in lift-primers and surfacers for lacquer systems and fast-drying industrial enamels, and can be combined with chlorinated rubber ...もっと表示する BECKOSOL® 663-X-50 is a short oil, rosin and phenolic modified, oxidizing alkyd solution available in xylene. It can be used in lift-primers and surfacers for lacquer systems and fast-drying industrial enamels, and can be combined with chlorinated rubber for fast-drying finishes with strong resistance to chemicals. This product exhibits good adhesion, even on hard-to-coat substrates such as zinc die castings, plastics, or fiberglass, and the end product will have hard, tough, corrosion-resistant coatings. 表示を減らす | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...もっと表示する BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 表示を減らす | |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...もっと表示する BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 表示を減らす | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...もっと表示する BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 表示を減らす | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...もっと表示する BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 表示を減らす | |
| Benester 896 | Benasedo | Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers...もっと表示する Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers and enamels, particularly for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. 表示を減らす | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...もっと表示する Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 表示を減らす | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...もっと表示する Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 表示を減らす | |
| BYD-1008 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1008, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in industrial paints, leather paints, and wood paints. This product is resistant to solvents and alcohol. It is durable for kinkin...もっと表示する BYD-1008, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in industrial paints, leather paints, and wood paints. This product is resistant to solvents and alcohol. It is durable for kinking applications and is resistant to yellowing. 表示を減らす | |
| BYD-1016 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an ...もっと表示する BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 表示を減らす | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...もっと表示する CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. 表示を減らす | |
| CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
| CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...もっと表示する CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. 表示を減らす | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...もっと表示する CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. 表示を減らす | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...もっと表示する CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. 表示を減らす | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....もっと表示する CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. 表示を減らす | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...もっと表示する CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. 表示を減らす | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...もっと表示する CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. 表示を減らす | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...もっと表示する CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. 表示を減らす | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...もっと表示する CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. 表示を減らす | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...もっと表示する CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. 表示を減らす | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....もっと表示する CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. 表示を減らす | |
| CHS-Alkyd T 501 WX 55 | Spolchemie | CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating ...もっと表示する CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating all purpose coatings to improve weathering and UV resistance, due to its low yellowing tendency. 表示を減らす | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...もっと表示する CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. 表示を減らす | |
| CHS-Epoxy 381 X 90 | Spolchemie | CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid pain...もっと表示する CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid paints and manufacture of anticorrosive coatings and enamels. 表示を減らす | |
| CHS-Epoxy 501 | Spolchemie | CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints...もっと表示する CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 508 | Spolchemie | CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher...もっと表示する CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling flooring. 表示を減らす | |
| CHS-Epoxy 514 | Spolchemie | CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints...もっと表示する CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 520 X 90 | Spolchemie | CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is...もっと表示する CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is for producing solid paints and manufacture anticorrosive coatings and enamels. 表示を減らす | |
| CHS-Epoxy 571 | Spolchemie | CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating mater...もっと表示する CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 572 | Spolchemie | CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating mater...もっと表示する CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 573 | Spolchemie | CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insula...もっと表示する CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 574 | Spolchemie | CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applicatio...もっと表示する CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 575 | Spolchemie | CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applicatio...もっと表示する CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CoatOSil* DRI Waterborne Silicone | Momentive | CoatOSil DRI waterborne silicone can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its innovative chemical structure enables it to overcome the difficulties of combining silicone materials with organic wate...もっと表示する CoatOSil DRI waterborne silicone can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its innovative chemical structure enables it to overcome the difficulties of combining silicone materials with organic waterborne resins. This product has been shown to improve hydrophobicity and elongation properties when used as a cobinder with acrylic latexes, resulting in more flexible coatings and sealants. CoatOSil DRI waterborne silicone may also be considered as a sole binder when maximizing thermal and UV stability is a priority. When applied alone, this product typically cures at room temperature to form an elastomeric film. *CoatOSil, Momentive and the Momentive logo are trademarks of Momentive Performance Materials Inc. 表示を減らす | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 20-5024 | Scott Bader | Crestakyd® 20-5024 is used for air drying and low bake industrial finishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. |
