| JONCRYL® 537 | BASF Dispersions & Resins | Joncryl® 537 is an acrylic emulsion for industrial coating applications. This translucent emulsion provides the fast dry characteristics of an emulsion, while providing the clarity and sandability necessary for applications such as interior wood sealers. | |
| SETAL® 41-1459 | Allnex | SETAL® 41-1459 is a resin is recommended for industrial finishes cured by bake, air-dry or force-dry. SETAL® 41-1459 exhibits the desirable properties of very fast dry, good corrosion resistance and low application viscosity. SETAL® 41-1459 has better sta...もっと表示する SETAL® 41-1459 is a resin is recommended for industrial finishes cured by bake, air-dry or force-dry. SETAL® 41-1459 exhibits the desirable properties of very fast dry, good corrosion resistance and low application viscosity. SETAL® 41-1459 has better stability and maintains drying characteristics on aging than SETAL® 41-1390. 表示を減らす | Request Sample |
| JONCRYL® 922 | BASF Dispersions & Resins | Joncryl® 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coa...もっと表示する Joncryl® 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times and a practical pot life. High solids coatings for maintenance, transportation, and other applications can be formulated from 2.3 to 3.8 pounds per gallon of VOC. Joncryl® 922 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product is also available in MAK as Joncryl® 920. It should be considered as a candidate for high performance, maintenance, and transportation coatings as a replacement for conventional solids urethane finishes. 表示を減らす | |
| JONCRYL® 909 | BASF Dispersions & Resins | Joncryl® 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethan...もっと表示する Joncryl® 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times, hardness development, and practical pot life. High solids coatings for maintenance, transportation, automotive refinish, and other applications can be formulated from 2.8 to 3.5 pounds per gallon of VOC. Joncryl® 909 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product should be considered as a candidate for high performance, maintenance, automotive refinish, and transportation coatings as a replacement for conventional solids urethane finishes. 表示を減らす | |
| Domacryl 5245 75 BAc | HELIOS RESINS | Domacryl 5245 75 BAc is a premium hydroxy acrylic resin with a very long pot life and super-fast hardness development. The resin is designed for TOP PERFORMANCE 2K PUR air or forced drying systems in automotive, ACE, and general metal top coats. The bio-b...もっと表示する Domacryl 5245 75 BAc is a premium hydroxy acrylic resin with a very long pot life and super-fast hardness development. The resin is designed for TOP PERFORMANCE 2K PUR air or forced drying systems in automotive, ACE, and general metal top coats. The bio-based content is 17% of the dry matter by the Carbon-14 method. 表示を減らす | |
| JONCRYL® 910 | BASF Dispersions & Resins | Joncryl® 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying polyurethane coatings with good pot life and excellent dry...もっと表示する Joncryl® 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying polyurethane coatings with good pot life and excellent dry time characteristics for maintenance, transportation, and other applications, at VOC levels as low as 3.2 pounds per gallon without exempt solvents. 表示を減らす | |
| JONCRYL® RPD 950-AC/P | BASF Dispersions & Resins | Joncryl® RPD 950-AC/P is a specialty acrylic polyol with rapid property development for solvent-borne 2K polyurethane systems in automotive refinish and general industrial applications. This polyol, when cross-linked with either Basonat® HI 100 or HI 190 aliphatic trimer isocyanate, provides fast...もっと表示する Joncryl® RPD 950-AC/P is a specialty acrylic polyol with rapid property development for solvent-borne 2K polyurethane systems in automotive refinish and general industrial applications. This polyol, when cross-linked with either Basonat® HI 100 or HI 190 aliphatic trimer isocyanate, provides fast cure with early hardness development and a long pot life. Joncryl® RPD 950-AC/P offers early buffability for automotive refinish applications. 表示を減らす | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...もっと表示する CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. 表示を減らす | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| WorléeSol E 530 W | Worlée-Chemie G.m.b.H. | WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically a...もっと表示する WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically and oxidative drying, a cobalt drier is not necessary in many cases. Varnishes based on W´Sol E 530 W show good wood firing, good water and chemical resistance and high abrasion resistance. This grade has a non volatile content of 30% ± 1. 表示を減らす | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2218 is a styrene acrylic resin which can be crosslinked with polyisocyanates. It is preferred for the formulation of very fast drying primers, fillers, and top coats for steel and plastics. This grade has a non-volatile content of 50% ± 1. | |
| Akuapol AL 2200 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2200 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2300 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2300 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2400 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2400 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 4500 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 4500 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| IDROBEN PD 723 40% W | Benasedo | IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Pol...もっと表示する IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Polystyrene etc.) wood and metal substrates, endowed with Flexibility, adhesion, very good water and out door resistance. 表示を減らす | |
| Domacryl 5369 75 BAc | HELIOS RESINS | Domacryl 5369 75 BAc is a hydroxy acrylic resin with a very long pot life and a super-fast hardness development. This resin is designed for TOP PERFORMANCE 2K PUR air or forced drying systems in automotive, ACE, and general metal top coats. | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...もっと表示する CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. 表示を減らす | |
| DOUBLEMER® 583-1 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 583-1 is a clear liquid, which can substitute for DOUBLEMER® THEICTA. It has characteristics of good impact strength; the speed of drying is fast, and non-yellowing properties. DOUBLEMER® 583-1 has good adhesion for PET and TAC. It can be used ...もっと表示する DOUBLEMER® 583-1 is a clear liquid, which can substitute for DOUBLEMER® THEICTA. It has characteristics of good impact strength; the speed of drying is fast, and non-yellowing properties. DOUBLEMER® 583-1 has good adhesion for PET and TAC. It can be used in metal, plastics and wood coatings. 表示を減らす | |
| Crestakyd® 30-5071 | Scott Bader | Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low rea...もっと表示する Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes. 表示を減らす | |
| Unithane IC-451 NF | Union Specialties, Inc. | Unithane IC-451 NF is a NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has fast drying and has automotive grade properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 100cps. It is designed for...もっと表示する Unithane IC-451 NF is a NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has fast drying and has automotive grade properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 100cps. It is designed for use in a formulated coating for wood, metal, concrete, flooring, graphic arts, and paints. 表示を減らす | |
| Unithane IC-352 NF | Union Specialties, Inc. | Unithane IC-352 NF is a NMP free, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and high chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 10-500cps. It is often u...もっと表示する Unithane IC-352 NF is a NMP free, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and high chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 10-500cps. It is often used in formulated topcoat for wood, metal, flooring, graphic arts, and paints. 表示を減らす | |
| Terlon™ 307 A | Lawter | Terlon™ 307 A is a drying oil alkyd with a linseed base in an alkyd that has good pigment wetting abilities and fast, hard-drying properties. It has the ability to carry and print a higher pigment load than conventional alkyds and bodied oils. Flushing or...もっと表示する Terlon™ 307 A is a drying oil alkyd with a linseed base in an alkyd that has good pigment wetting abilities and fast, hard-drying properties. It has the ability to carry and print a higher pigment load than conventional alkyds and bodied oils. Flushing or grinding with the product yields more cleanliness and color strength than conventional wetting systems, while still retaining good flow characteristics. Terlon™ 307 A is a good pigment binder on most printable surfaces and is used in applications such as coldset, web heatset, varnishes and metal decorating inks. 表示を減らす | |
| Unithane SX-482 NF | Union Specialties, Inc. | Unithane SX-482 NF is a self-crosslinking, NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and good chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 100cps....もっと表示する Unithane SX-482 NF is a self-crosslinking, NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and good chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 100cps. It is specifically designed for use in a formulated coating for wood, metal, concrete, graphic arts, and paints. 表示を減らす | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...もっと表示する Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. 表示を減らす | |
| Terlon™ 311 A | Lawter | Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flu...もっと表示する Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flushing of the product results in more color strength and cleanliness than conventional wetting systems, while keeping good flow characteristics. It is an ideal pigment binder with an ability to print on most printable surfaces. Such applications include metal decorating inks, coldset systems, web heatset inks, sheet-fed inks and varnishes. 表示を減らす | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...もっと表示する IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. 表示を減らす | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast dry...もっと表示する CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. 表示を減らす | |
| Ultrapoly™ 2300 A | Lawter | Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip a...もっと表示する Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip are needed. The product is fast-setting and non-volatile and protects film in the earliest phase of printing while developing toughness over time. Ultrapoly™ 2300 A is considered ideal for use in sheet-fed offset inks and in UV and OPV metal decorating inks. 表示を減らす | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast dry...もっと表示する CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. 表示を減らす | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...もっと表示する CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. 表示を減らす | |
| Terlon™ 3010 A | Lawter | Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and...もっと表示する Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and maintain color strength with little bronzing while providing leveling and flow, ensure the product is an essential formulating tool. Terlon™ 310 A is compatible with most inks, helping to stabilizing ink formulations that don't hold up on long runs. The applications in which it has uses include sheet-fed offset, heatset offset, coldset offset, metal deco and letterpress. 表示を減らす | |
| EPOCROS™ K-2020E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers film properties, low toxicity, fast dry...もっと表示する EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers film properties, low toxicity, fast drying along with improved water- and heat resistance. It possesses a controllable appearance by adjusting glass transition temperature. It has a long pot life for one packaging. It shows excellent adhesion particularly to polyester such as PET. Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. 表示を減らす | Request Sample |
| EPOCROS™ WS-500 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It exhibits crosslinking reaction at low temperature (80-120°C) with no by-product. It provides film properties, low toxicity, fast dry...もっと表示する EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It exhibits crosslinking reaction at low temperature (80-120°C) with no by-product. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). EPOCROS™ WS-500 is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. 表示を減らす | Request Sample |
| EPOCROS™ K-2010E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & hea...もっと表示する EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and a controllable appearance by glass transition temperature adjustment. It also offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. EPOCROS™ K-2010E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. 表示を減らす | Request Sample |
| EPOCROS™ K-2035E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat ...もっと表示する EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and controllable appearance by glass transition temperature adjustment. It offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It has a long pot life for one packaging. EPOCROS™ K-2035E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. 表示を減らす | Request Sample |
| EPOCROS™ WS-300 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-300 is a VOC-free adhesion promoter and waterborne crosslinking agent based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows ex...もっと表示する EPOCROS™ WS-300 is a VOC-free adhesion promoter and waterborne crosslinking agent based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). It exhibits controllable appearance by glass transition temperature adjustment and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers high reactivity with carboxyl groups and performance expression with even small addition. It has a long pot life for one packaging. EPOCROS™ WS-300 is designed for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. 表示を減らす | Request Sample |
| EPOCROS™ WS-700 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crossl...もっと表示する EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It offers excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. EPOCROS™ WS-700 has a long pot life for one packaging. 表示を減らす | Request Sample |
