| CHEMREZ 30 | Univar Solutions | CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and...view more CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin solution to dry pigment. CHEMREZ 30 has been used with a wide range of organic pigments as well as carbon black. CHEMREZ 30 as a letdown vehicle can be used upwards of 50% of the formulation. view less | Request Sample |
| Hollow Glass Microspheres | Cospheric LLC | Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microsp...view more Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microspheres are rigid and typically have the thickness of 10% of the diameter of the sphere. The crush strength of the hollow spheres is determined by the thickness of the walls and, as expected, the higher the sphere density the higher the crush strength. The lightweight hollow glass spheres are chemically stable, noncombustible, nonporous, and have excellent water resistance. view less | |
| BRC-843S | Bomar, formerly Dymax Oligomers & Coatings | BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the subst...view more BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the substrates use-life. BRC-843S is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device. view less | |
| PAT-ADD DA 788 | Patcham USA | PAT-ADD DA 788 is a unique stabilizer for water in organic solvent borne alkyd resins and coatings. It stabilizes water in organic solvent borne alkyd paints, By the use of PAT-ADD DA 788, solvent-borne alkyd paints are formulated replacing part of the mi...view more PAT-ADD DA 788 is a unique stabilizer for water in organic solvent borne alkyd resins and coatings. It stabilizes water in organic solvent borne alkyd paints, By the use of PAT-ADD DA 788, solvent-borne alkyd paints are formulated replacing part of the mineral spirits with water. This results in reduction in VOC content, at lowest cost. Main benefits are: enabling paint cost reduction by water addition, enabling reduction in VOC level, and replacement of 20 to 35% of traditionally used white spirit in alkyd paint. view less | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...view more DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. view less | |
| Polychloroprene Adhesive (Formulation #RRS 2202) | Hoffmann Mineral | This polychloroprene adhesive SILLITIN Z 86 PURISS or AKTISIL PF 777. | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating h...view more TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with a density (pounds / gallon @ 25°C) of 9.3 +/- 0.3, a moisture content of 0.05 max., viscosity (Brookfield @ 25°C (as supplied)) of 300-500P, and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with an acid value (as supplied) of 0.8mg KOH/g max., a hydroxyl content (as supplied) of 87-93mg KOH/g, and a viscosity (Brookfield @ 25°C (as supplied)) of 100-200P. view less | |
| SILLITIN Z 86 PURISS | Hoffmann Mineral | SILLITIN Z 86 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...view more DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| LUDOX® CL | Univar Solutions | LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that impa...view more LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that imparts a positive charge. LUDOX® CL Colloidal Silica may be used in various coating applications in which the formulation requires acidic pH or cationic polymers or surfactants. The positively charged particles may be used as surface treatments to paper and fibrous materials. LUDOX® CL Colloidal Silica can also be used as a high temperature binder. view less | Request Sample |
| Lupasol® | BASF Formulation Technologies | Lupasol® Polyethylenimine (PEI) polymers have a branched cationic structure with high charge density that enables improved adhesion of dissimilar materials. Lupasol® can be used as a formulation additive or primer coat for: adhesion promotion, pigment sta...view more Lupasol® Polyethylenimine (PEI) polymers have a branched cationic structure with high charge density that enables improved adhesion of dissimilar materials. Lupasol® can be used as a formulation additive or primer coat for: adhesion promotion, pigment stabilization, and increased particle cohesion. Obtained from the polymerization of ethylenimine, this line of polymers is available in a wide range of molecular weights (from 800 -106 g/mol). Lupasol® products are water soluble and also exhibit good solubility in polar solvents with the added benefit of having a strong eco-toxicological profile including several food contact compliances. view less | |
| TAMOL™ 2002 | Univar Solutions | TAMOL™ 2002 is a high-performance hydrophobic copolymer dispersant especially suitable for semigloss and gloss paints. It is supplied in unneutralized emulsion form, free of any APEO surfactants, designed to be a performance match for TAMOL™ 2001 dispersa...view more TAMOL™ 2002 is a high-performance hydrophobic copolymer dispersant especially suitable for semigloss and gloss paints. It is supplied in unneutralized emulsion form, free of any APEO surfactants, designed to be a performance match for TAMOL™ 2001 dispersant. Relative to TAMOL™ 681, TAMOL™ 2002 provides reduced use cost, reduced as-supplied viscosity, lower odor, higher as-supplied solids, and formulation flexibility via choice of neutralizing base and absence of solvent. Sodium hydroxide, potassium hydroxide, sodium carbonate and AMP-95, as well as ammonia, can be used to neutralize the emulsion. view less | Request Sample |
| JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Add...view more JONCRYL U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. view less | |
| 2K-PU Flooring (Formulation #V 44409.0) | Hoffmann Mineral | This 2K-PU Flooring is flexible, self-leveling, and solvent-free. It features SILLITIN Z 86. | |
| Desmodur® L 75 | Covestro | Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formul...view more Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings and adhesives. Systems crosslinked with Desmodur L 75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. It is also suitable for room-temperature crosslinking of adhesives based on Desmocoll® or Baycoll®. These can be used to bond many materials,e.g. wood, metal and plastic. view less | |
| Dual-Cure 3401 | Bomar, formerly Dymax Oligomers & Coatings | Dual-Cure 3401 is designed for rapid bonding of a wide variety of plastic and metal substrates and is ideally suited for PC and ABS bonding applications. The product provides superior bond strength and is formulated with a UV/visible light and secondary a...view more Dual-Cure 3401 is designed for rapid bonding of a wide variety of plastic and metal substrates and is ideally suited for PC and ABS bonding applications. The product provides superior bond strength and is formulated with a UV/visible light and secondary ambient moisture-cure system for curing in shadow areas. Dual-Cure 3401 is also moisture and thermal resistant, has low shrinkage, and fluoresces blue under low-intensity “black light” (365 nm) for easy in-line inspection. Dual-Cure 3401 has applications that include plastic assembly, appliance assembly, and bonding, sealing, or encapsulating PC and ABS components. view less | |
| SILLITIN V 85 | Hoffmann Mineral | SILLITIN V 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 85 PURISS | Hoffmann Mineral | SILLITIN N 85 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL PF 777 | Hoffmann Mineral | AKTISIL PF 777 is an activated SILLITIN Z 86, produced by modifying the surface with alkyl silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents. | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| EPS® 2708 | EPS Materials | EPS® 2708 is an all-acrylic emulsion designed for high alkali applications. It can be used as a polymer admixture for cement-based products, and as a binder/primer for coatings over cementitious substrates. | Request Sample |
| Epoxy Hot Melt Adhesive (Formulation #RRS 2110) | Hoffmann Mineral | This epoxy hot melt adhesive features SILLITIN V 85. | |
| 2K Epoxy Industrial Flooring (Formulation #RRS 2172) | Hoffmann Mineral | This self-leveling, water-borne industrial flooring features SILLITIN Z 89. | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...view more BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. view less | |
| LUMIFLON® FD1000 | Univar Solutions | LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weigh...view more LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weight combined with a high hydroxyl value for creating 2K waterbased polyurethane coatings with a high crosslink density. This waterborne polyol is classified as a dispersion as it is synthesized without emulsifier. This unique, emulsifier-free technology allows for the formulation of waterbased 2K polyurethane coatings with the same performance as traditional solventbased 2K coatings. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. view less | Request Sample |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| XIAMETER™ PMX-0245 Cyclopentasiloxane | Univar Solutions | XIAMETER® PMX-0245 Cyclopentasiloxane is a volatile polydimethylcyclosiloxane composed mainly of cyclopentasiloxane. It may be used in antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions and stick products, bath oils, suntan a...view more XIAMETER® PMX-0245 Cyclopentasiloxane is a volatile polydimethylcyclosiloxane composed mainly of cyclopentasiloxane. It may be used in antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions and stick products, bath oils, suntan and shaving products, make-up and nail polishes. view less | Request Sample |
| SILLITIN Z 89 PURISS | Hoffmann Mineral | SILLITIN Z 89 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| 2K-Epoxy Industrial Flooring (Formulation #V 44422.2 [13]) | Hoffmann Mineral | This epoxy industrial flooring is self-leveling, with good pigment stability. It features SILLITIN Z 86. | |
| 2K-Polyaspartic Floor Coat (Formulation #WKHB 512/1) | Hoffmann Mineral | This tough floor coating is self-leveling and solvent-free. It features SILLITIN Z 86. | |
| 2K-Polyaspartic Floor Coat (Formulation #WKHB 512/2) | Hoffmann Mineral | This flooring flex coat is self-leveling and solvent-free. It features SILLITIN Z 86. | |
| SILLIKOLLOID P 87 PURISS | Hoffmann Mineral | SILLIKOLLOID P 87 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| OXFILM 351 | Univar Solutions | OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required...view more OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required to obtain the desired final film hardness. OXFILM 351 is not designed to be a drop-in replacement for traditional ester alcohol or glycol ether coalescents. It is intended for next generation low odor, low VOC coatings. Use of a slightly harder polymer is recommended to compensate for its permanence and plasticizing effect in the dried film. Low odor, extremely low 28 day emission results are achievable with OXFILM 351 when properly formulated. view less | Request Sample |
| Retroreflective Microspheres | Cospheric LLC | Retroreflective Microspheres incorporate a hemispherically coated aluminum shell which provides maximum retroreflection. In bulk, these metallized glass spheres appear as a grey powder. Under an optical microscope, each individual microsphere displays a p...view more Retroreflective Microspheres incorporate a hemispherically coated aluminum shell which provides maximum retroreflection. In bulk, these metallized glass spheres appear as a grey powder. Under an optical microscope, each individual microsphere displays a partial aluminum coating. Aluminum (Al) coatings on microspheres offer advantages in developing retroreflective surfaces for high visibility materials and applications. The hemispherical (half-shell) aluminum coating creates the mechanism for retroreflectivity as the light passes through the clear half of the glass bead and “bounces” off the reflective aluminum-coated back surface, directing the light back to the source or the viewer. Additional surface coatings (silane or fluorochemical) ensure that the spheres remain on the surface of the formulation, thereby enhancing the effect of retroreflectivity. view less | |
| BRC-843 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substr...view more BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and polystyrene. view less | |
| Mounting Adhesive, Polyester-acrylic Based (Formulation #RRS 2203) | Hoffmann Mineral | This mounting adhesive features AKTISIL VM 56. | |
| Adhesive Based on Silane-Terminated Polyether, High Strength (Formulation #V44303.2C) | Hoffmann Mineral | This adhesive is based on silane-terminated polyether and provides maximum strength. It features SILLITIN V 85, SILFIT Z 91 or AKTIFIT VM. | |
| 1K STP-U Adhesive, High Strength (Formulation #V44426.1) | Hoffmann Mineral | This high strength adhesive features SILFIT Z 91, AKTIFIT PF 115, or AKTIFIT PF 111. | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| ZetaSperse® 170 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring grou...view more ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring group that has been found to have particularly strong affinity for carbon black pigments, titanium dioxide pigments, and other pigments and particles with acidic surface groups. ZetaSperse® 170 dispersant is most effective when used as a secondary dispersant in conjunction with anionic polymeric dispersants and grind resins where it can provide significant wetting, milling, and steric stabilization benefits, often improving milling efficiency, color development, and dispersion stability, allowing formulators to achieve higher performance. view less | |
| Epokukdo KR-170 | Kukdo Chemical Co., Ltd. | Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used...view more Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used in formulating for the floor coating, molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. This product having medium-high viscosity is suitable for using in non-solvent adhesive, resin mortar, construction applications and flexible coating. KR-170 is particularly suitable for being applied on non-polar substrate surfaces such as PE or PP, greasy surface or oily surface of metals and so forth. view less | |
| BRC-443 | Bomar, formerly Dymax Oligomers & Coatings | BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substra...view more BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. view less | |
| BRC-443D | Bomar, formerly Dymax Oligomers & Coatings | BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substr...view more BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. view less | |
| 2K-PU Joint Sealant with Polybutadiene Polyol (Formulation #V 44416.0) | Hoffmann Mineral | This joint sealant features SILLITIN Z 86. | |
| AKTISIL MAM | Hoffmann Mineral | AKTISIL MAM is an activated SILLITIN V 88, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Can be used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...view more Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. view less | Request Sample |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...view more BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. view less | |
| RHOPLEX™ AC-337N | Univar Solutions | RHOPLEX™ AC-337N is 100% Acrylic Emulsion is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. It reacts more efficiently with asso...view more RHOPLEX™ AC-337N is 100% Acrylic Emulsion is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. It reacts more efficiently with associative thickeners, leading potentially to lower formulation cost. RHOPLEX™ AC-337N also shows improved color acceptance and alkyd compatibility. The 100% acrylic backbone ensures the high standard of tint retention, crack resistance, chalk resistance, and alkali resistance. The outstanding adhesion technology will ensure excellent adhesion to wood. The in-can clarity makes it possible to prepare transparent and semi-transparent stains with more attractive application properties than conventional alkyd emulsion or acrylic emulsion based stains. view less | Request Sample |
| 1K STP-U Adhesive (Formulation #BBB 7006 [01/16]) | Hoffmann Mineral | This adhesive features SILLITIN Z 86. | |
| 1K STP-U Adhesive (Formulation #BBB 7372 [01/16]) | Hoffmann Mineral | This adhesive features SILLITIN Z 86. | |
| Adhesive Based on Silane-Terminated Polyether, High Strength (Formulation #V44303.2A) | Hoffmann Mineral | This adhesive based on silane-terminated polyether features SILLITIN V 85, SILFIT Z 91, or AKTIFIT VM. | |
| PAT-ADD AF 31 | Patcham USA | PAT-ADD AF 31 is an easy dispersed defoamer for use in waterborne coatings, aqueous inks and pigment dispersions. PAT-ADD AF 31 is an oil-free defoamer based on an organically modified polysiloxane. Although specially developed for use in low pigmented pa...view more PAT-ADD AF 31 is an easy dispersed defoamer for use in waterborne coatings, aqueous inks and pigment dispersions. PAT-ADD AF 31 is an oil-free defoamer based on an organically modified polysiloxane. Although specially developed for use in low pigmented paints and varnishes, PAT-ADD AF 31 is versatile in application. It is a highly efficient defoamer and anti-foaming additive for waterborne during manufacturing and application. Main benefits are: easily dispersible, highly effective anti-foaming agent requiring low dosage, and clear liquid with excellent shelf stability. view less | |
| XIAMETER® OFS-6020 Silane | Univar Solutions | XIAMETER® OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces. It has been found to be an effective coupling agent for clay reinforced elas...view more XIAMETER® OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces. It has been found to be an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber. The silane-treated clay provides improvement in both physical and dynamic properties compared to similar cured elastomers containing untreated clay. May also be used as an additive to improve the performance of these types of thermoset resins when they are used as mineral binders in foundry and abrasive composite applications. view less | Request Sample |
| XIAMETER® OFS-6070 Silane | Univar Solutions | XIAMETER® OFS-6070 Silane is an alkoxy silane supplied as a low-viscosity liquid that is used to make inorganic surfaces hydrophobic. It is also used as a pigment treatment to aid in dispersion. | Request Sample |
| Elastic Adhesive Based on MS Polymer™ (Formulation #V 44423.1B) | Hoffmann Mineral | This elastic adhesive features SILLITIN Z 86. | |
| SILLIKOLLOID P 87 | Hoffmann Mineral | SILLIKOLLOID P 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinte. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| AKTIFIT PF 111 | Hoffmann Mineral | AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints. | |
| XIAMETER™ OFX-0193 Fluid | Univar Solutions | XIAMETER® OFX-0193 Fluid is a silicone polyether copolymer. This emulsifier is compatible with a wide range of cosmetic ingredients and can function as a foam builder that forms a dense, stable foam, a wetting agent, a surface tension depressant, or a pla...view more XIAMETER® OFX-0193 Fluid is a silicone polyether copolymer. This emulsifier is compatible with a wide range of cosmetic ingredients and can function as a foam builder that forms a dense, stable foam, a wetting agent, a surface tension depressant, or a plasticizing hair styling resin. It imparts a soft, silky feel to hair and acts as a humectant and emollient in skin care products. It is suitable for a wide range of applications in personal care products such as hair sprays and other leave in hair products, shampoos, skin care lotion and shaving soaps. view less | Request Sample |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...view more AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). view less | |
| Phenoxy PK™FE | Gabriel Performance Products | Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...view more Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HB | Gabriel Performance Products | Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...view more Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HH | Gabriel Performance Products | Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...view more Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HA | Gabriel Performance Products | Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...view more Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...view more AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. view less | |
| Non-Sagging Parquet Adhesive Based on MS Polymer™ (Formulation #V 44424.2) | Hoffmann Mineral | This parquet adhesive is non-sagging and features SILLITIN Z 86 or SILLITIN V 85. | |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...view more Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. view less | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...view more EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. view less | Request Sample |
| SILLITIN N 85 | Hoffmann Mineral | SILLITIN N 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...view more EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. view less | Request Sample |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction. | |
| EPS® 9147 | EPS Materials | EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stabilit...view more EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stability should be preformed. This is a permanent coalescent that remains in the paint film and should not be stored in PVC containers or piping for extended periods of time. view less | Request Sample |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...view more AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). view less | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...view more DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. view less | |
| PAT-ADD DA 817 | Patcham USA | PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particula...view more PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting agents, and prevents hard sedimentation in waterborne as well as solvent-borne primers. view less | |
| XIAMETER™ PMX-200 Silicone Fluid 100 CS | Univar Solutions | XIAMETER® PMX-200 Silicone Fluid 100 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic s...view more XIAMETER® PMX-200 Silicone Fluid 100 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less | Request Sample |
| PAT-ADD LE 1020 | Patcham USA | PAT-ADD LE 1020 is a levelling and substrate wetting agent for use in solvent-borne coatings PAT-ADD LE 1020 is very suitable for use in clear coatings. PAT-ADD LE 1020 enhances flow and levelling and provides gloss optimisation. Main benefits are: highly...view more PAT-ADD LE 1020 is a levelling and substrate wetting agent for use in solvent-borne coatings PAT-ADD LE 1020 is very suitable for use in clear coatings. PAT-ADD LE 1020 enhances flow and levelling and provides gloss optimisation. Main benefits are: highly effective leveling and substrate wetting additive, wide range compatibility, reduce coefficent of friction (COF), reduce risk of pigment float, and effective in epoxies, PUR, acrylics, polyester industrial paints and inks. view less | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...view more Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. view less | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...view more Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. view less | |
| SPUR+ 1050 prepolymer | Momentive Performance Materials | SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and applications whe...view more SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and applications where higher tensile strength is required. view less | |
| XIAMETER™ PMX-200 Silicone Fluid 50 CS | Univar Solutions | XIAMETER® PMX-200 Silicone Fluid 50 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic so...view more XIAMETER® PMX-200 Silicone Fluid 50 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less | Request Sample |
| GLOXIL WW SL | Hoffmann Mineral | GLOXIL WW SL is an aqueous dispersion based on modified silica for use in matt water-based coatings improves incorporation, transparency and resistance. | |
| AKTISIL VM 56 | Hoffmann Mineral | AKTISIL VM 56 is an activated SILLITIN Z 86, produced by modifying the surface with Vinyl-triethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| XIAMETER™ PMX-200 Silicone Fluid 350 CS | Univar Solutions | XIAMETER® PMX-200 Silicone Fluid 350 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic s...view more XIAMETER® PMX-200 Silicone Fluid 350 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less | Request Sample |
| Incozol 4 | Incorez Ltd. | Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it i...view more Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. view less | |
| Eastman Optifilm™ Enhancer 400 | Univar Solutions | Eastman Optifilm™ enhancer 400 is a very low VOC, low odor coalescent that is compatible with a variety of latex types. It is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. Eastman ...view more Eastman Optifilm™ enhancer 400 is a very low VOC, low odor coalescent that is compatible with a variety of latex types. It is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. Eastman Optifilm™ enhancer 400 delivers excellent film integrity, touch-up properties, and scrub resistance, even at the lowest VOCs content. Paints prepared with Eastman Optifilm™ enhancer 400 have also demonstrated good exterior durability after one year exposure. view less | Request Sample |
| Viscoatex™ 560 | Arkema Rheology & Specialty Additives | Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type,...view more Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type, surfactant and co-solvent. view less | Request Sample |
