| PAT-ADD SU 4BC | Patcham USA | PAT-ADD SU 4BC provides performance benefits in many applications; in paints, inks, adhesives and other chemical formulations. Used as a defoaming and wetting agent. This solvent composition of this product is 2-butoxy ethanol. | |
| REAXIS® C223 | Reaxis Inc. | REAXIS® C223 is a yellowish liquid catalyst that is utilized suited for the synthesis of polyurethane systems, polycondensation reactions of RTV silicone resins and salines. REAXIS® 223 is also available in special formulations upon request. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DERCOLYTE TS 105 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE TS 105 is a very light colored tackifying resin showing excellent adhesive performances with block copolymers, especially in hot melt, pressure sensitive adhesives formulations. It is produced from the copolymerisation of terpene and styrene. | |
| Speedcure BKL | Lambson Group Ltd. | SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253.nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| Rheotech™ M 02 | Arkema Rheology & Specialty Additives | Rheotech™ M 02 is a highly effective associative acrylic based thickener specifically designed for putty and textured coatings formulations Rheotech™ M 02 provides high viscosities at low and medium shear rates and outstanding resistance to crushing. | Request Sample |
| GENOMER* 1125 | Rahn USA Corp. | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| Dovernox® D-311 | Dover Chemical Corporation | Dovernox® D-311 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation, to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-321 | Dover Chemical Corporation | Dovernox® D-321 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| REAXIS® C226 | Reaxis Inc. | REAXIS® C226 is a yellowish liquid catalyst that is well suited for the synthesis of polyurethane systems and the polycondensation reactions of RTV silicone resins and salines. REAXIS® C226 is also available in special formulations upon request. | |
| PRO14072 | Sartomer Americas | PRO14072 is a low viscosity (meth)acrylate providing low residual ash content and high reactivity for the printing of ceramic by SLA/DLP. PRO14072 offers high green strength and flexibility in the development of technical ceramic formulations. | |
| REAXIS® C717 | Reaxis Inc. | REAXIS® C717 is a mixed metal liquid catalyst used for the production of polyurethane systems, including 2Ks, prepolymers, and elastomers. REAXIS® C717 is characterized by a high selectivity for the NCO/OH reaction, especially in 2K formulations. | |
| Speedcure 84 | Lambson Group Ltd. | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| SURFYNOL® DF-58 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. It has strong foam control and deairation performance. Developed for use in water-based coating and ink formulations where strong, rapid defoaming is required. 100% active liquid. | |
| Cimsil CT2 | Tolsa, S.A. | Cimsil CT2 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesives. It can be used in mortars and tile adhesives. | |
| Uvi-Cure S128 | Lambson Group Ltd. | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| DOWSIL™ US-CF 2403 Resin | Univar Solutions | DOWSIL™ US-CF 2403 Resin is a methyl-methoxy functional, solvent-less and low molecular weight liquid siloxane. It can be used as a sole binder or in combination with organic resins, in both clear and pigmented formulations. | Request Sample |
| Dovernox® D-9411-T | Dover Chemical Corporation | Dovernox® D-9411T is a one to one blend of Doverphos® S-9228T and Doverphos® S-480. It is offered by Dover Chemical Corporation to be used in various polymer formulations as an excellent cost/performance processing stabilizer. | |
| Speedcure EDB | Lambson Group Ltd. | SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure MBF | Lambson Group Ltd. | SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244_nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| Speedcure 73 | Lambson Group Ltd. | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| SR508IJ | Sartomer Americas | SR508IJ is a difunctional monomer designed to increase the gelation stability of UV formulations at elevated temperatures. Performance properties include: abrasion resistance, adhesion, chemical resistance, hardness, impact strength and water resistance. ...view more SR508IJ is a difunctional monomer designed to increase the gelation stability of UV formulations at elevated temperatures. Performance properties include: abrasion resistance, adhesion, chemical resistance, hardness, impact strength and water resistance. Suggested applications include: coatings and inkjet inks. view less | |
| Versamid® 228 | Gabriel Performance Products | Versamid® 228 is a modified polyamide/epoxy adduct designed for reactions with low viscosity liquid epoxy resins. Versamid® 228 and epoxy resin systems are recommended for applications such as industrial maintenance coating applications, primers, and enamel paint formulations...view more Versamid® 228 is a modified polyamide/epoxy adduct designed for reactions with low viscosity liquid epoxy resins. Versamid® 228 and epoxy resin systems are recommended for applications such as industrial maintenance coating applications, primers, and enamel paint formulations. view less | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| Coapur™ 2020 W | Arkema Rheology & Specialty Additives | Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheo...view more Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2020 W is a pure associative thickener. It is designed to interact strongly with the blinder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2020 W helps to match the highest coating quality possible for water-based formulations. view less | Request Sample |
| Cimsil CT1 | Tolsa, S.A. | Cimsil CT1 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesive mortars. It can be used in mortars and tile adhesives. | |
| LAPONITE® S482 | BYK | LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations...view more LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. view less | |
| GENOMER* 4337 | Rahn USA Corp. | GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overpr...view more GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overprint varnishes. view less | Request Sample |
| CN9290US | Sartomer Americas | CN9290US is a difunctional aliphatic urethane acrylate oligomer that imparts flexibility and non-yellowing properties to UV/EB-cure formulations and is compatible with epoxy acrylate oligomers. Adhesives, inks, screen inks, and overprint varnishes are rec...view more CN9290US is a difunctional aliphatic urethane acrylate oligomer that imparts flexibility and non-yellowing properties to UV/EB-cure formulations and is compatible with epoxy acrylate oligomers. Adhesives, inks, screen inks, and overprint varnishes are recommended uses for CN9290US. view less | |
| REAXIS® C208 | Reaxis Inc. | REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon reque...view more REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon request. view less | |
| Speedcure DMB | Lambson Group Ltd. | SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EHA | Lambson Group Ltd. | SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure BEDB | Lambson Group Ltd. | SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure BDMB | Lambson Group Ltd. | SpeedCure BDMB is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximumat 321 nm. SpeedCure BDMB provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Proglyme | BASF SE, Intermediates Division | Ethyl diglyme (diethylene glycol diethyl ether) is a suitable solvent for emissive applications like digital ink formulations. This water soluble, low odor aprotic solvent offers high solvency and dispersancy for pigments and dyes, while preventing clogg...view more Ethyl diglyme (diethylene glycol diethyl ether) is a suitable solvent for emissive applications like digital ink formulations. This water soluble, low odor aprotic solvent offers high solvency and dispersancy for pigments and dyes, while preventing clogging of printer heads. view less | |
| Texipol® 63-303 | Scott Bader | Texipol® 63-303 is a high solids inverse emulsion polymer that has high efficiency and is used in a variety of water-based formulations. It can be used as a thickening PVA bonding aid and in construction and industrial adhesives. | |
| GENIOSIL® STP-E10 | Wacker Chemical Corporation | GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E15 | Wacker Chemical Corporation | GENIOSIL® STP-E 15 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E30 | Wacker Chemical Corporation | GENIOSIL® STP-E 30 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E35 | Wacker Chemical Corporation | GENIOSIL® STP-E 35 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| Speedcure 97 | Lambson Group Ltd. | SpeedCure 97 is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximum at 306 nm. SpeedCure 97 provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| CN2295 | Sartomer Americas | CN2295 is a hexafunctional polyester acrylate oligomer developed for energycurable ink systems. CN2295 imparts low water pickup, good flow, and good pigment wetting to litho or offset inks. CN2295 can be used in various energy-curable formulations to incr...view more CN2295 is a hexafunctional polyester acrylate oligomer developed for energycurable ink systems. CN2295 imparts low water pickup, good flow, and good pigment wetting to litho or offset inks. CN2295 can be used in various energy-curable formulations to increase hydrophobicity. view less | |
| Speedcure PDO | Lambson Group Ltd. | SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications...view more SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications. view less | |
| D.E.N.™ 438L | Univar Solutions | D.E.N.™ 438L by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and low viscosity. D.E.N.™ 438L is recognized as a standard for high-temperature applications and higher solid formulations...view more D.E.N.™ 438L by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and low viscosity. D.E.N.™ 438L is recognized as a standard for high-temperature applications and higher solid formulations. view less | Request Sample |
| SiSiB® PC7970 | SiSiB SILICONES | SiSiB® PC7970 is a colorless or yellowish transparent liquid. It is not miscible with water and instead decomposes with water and moisture under formation of acetic acid. It is used as a raw material (crosslinker) for acetoxy crosslinking RTV-1 sealant formulations...view more SiSiB® PC7970 is a colorless or yellowish transparent liquid. It is not miscible with water and instead decomposes with water and moisture under formation of acetic acid. It is used as a raw material (crosslinker) for acetoxy crosslinking RTV-1 sealant formulations. view less | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...view more D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. view less | |
| Dow Corning® 1250 Surfactant | Univar Solutions | Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthe...view more Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthetic leathers. view less | Request Sample |
| CN704 | Sartomer Americas | CN704 is an acrylated polyester adhesion promoter that provides excellent adhesion to polyolefins, such as polyethylene and polypropylene. CN704 is designed for UV/EB cured inks and coatings. Due to its low acid value, CN704 can be used in formulations co...view more CN704 is an acrylated polyester adhesion promoter that provides excellent adhesion to polyolefins, such as polyethylene and polypropylene. CN704 is designed for UV/EB cured inks and coatings. Due to its low acid value, CN704 can be used in formulations containing tertiary amines. view less | |
| Speedcure BEM | Lambson Group Ltd. | SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations...view more SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
| GENORAD* 23 | Rahn USA Corp. | GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations...view more GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations. view less | Request Sample |
| Dovernox® D-921 | Dover Chemical Corporation | Dovernox® D-921 is an antioxidant blend which has an advantage of low-dusting during handling and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Dovernox® 10. | |
| Speedcure BP | Lambson Group Ltd. | SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations...view more SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. view less | |
| Speedcure MBP | Lambson Group Ltd. | SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations...view more SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| Polydo DP-750 | Kukdo Chemical Co., Ltd. | Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It ...view more Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less | |
| Speedcure 7040 | Lambson Group Ltd. | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations...view more SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. view less | |
| Polydo DP-1000 | Kukdo Chemical Co., Ltd. | Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...view more Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less | |
| RHODOLINE® 3100 | Univar Solutions | RHODOLINE® 3100 is an excellent APE-free non-ionic wetting/dispersing agent for use in waterborne paint fomulations. It is a low to medium HLB organic pigment wetting including carbon black, lampblack, and substrate wetting. It replaces APE wetting agents for paint formulations...view more RHODOLINE® 3100 is an excellent APE-free non-ionic wetting/dispersing agent for use in waterborne paint fomulations. It is a low to medium HLB organic pigment wetting including carbon black, lampblack, and substrate wetting. It replaces APE wetting agents for paint formulations. view less | Request Sample |
| RHODOLINE® 4170 | Univar Solutions | RHODOLINE® 4170 is a very effective APE free, anionic wetting and dispersing agent for use in waterborne paint formulations. It is excellent in dispersing inorganic pigments like iron oxide. In waterborne coatings, it exhibits improved film properties inc...view more RHODOLINE® 4170 is a very effective APE free, anionic wetting and dispersing agent for use in waterborne paint formulations. It is excellent in dispersing inorganic pigments like iron oxide. In waterborne coatings, it exhibits improved film properties including gloss, color acceptance, and adhesion. view less | Request Sample |
| GENOMER* 7302 | Rahn USA Corp. | GENOMER* 7302 is a mercaptan-modified polyether acrylate. Formulations containing GENOMER* 7302 can be readily cured with UV LED, UVA or low energy UV lamps. This product reduces oxygen inhibition of the free radical curing process and improves surface cu...view more GENOMER* 7302 is a mercaptan-modified polyether acrylate. Formulations containing GENOMER* 7302 can be readily cured with UV LED, UVA or low energy UV lamps. This product reduces oxygen inhibition of the free radical curing process and improves surface cure without increasing odor. view less | Request Sample |
| CN6502 | Sartomer Americas | CN6502 is an acrylate oligomer developed for use in UV and EB soft feel inks and coatings. It is used with CN6500 to create velvety coatings. CN6502 is intended for use in solventborne formulations, but can also be formulated for use in 100% solids system...view more CN6502 is an acrylate oligomer developed for use in UV and EB soft feel inks and coatings. It is used with CN6500 to create velvety coatings. CN6502 is intended for use in solventborne formulations, but can also be formulated for use in 100% solids systems. view less | |
| DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations...view more DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
| GENOMER* 4212 | Rahn USA Corp. | GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of finished formulations...view more GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of finished formulations. view less | Request Sample |
| BYK®-348 | BYK | BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...view more BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. view less | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...view more D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. view less | |
| Dovernox®D-721 | Dover Chemical Corporation | Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnama...view more Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. view less | |
| Razeen® SL 2711W57 | Jubail Chemical Industries Co. | Razeen® SL 2711W57 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity and compatibility with a wide variety of different end product formulations. Razeen® SL 2711W57 is used in chemical resist...view more Razeen® SL 2711W57 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity and compatibility with a wide variety of different end product formulations. Razeen® SL 2711W57 is used in chemical resistant coatings and matrix adhesives. view less | |
| SR341 | Sartomer Americas | SR341 is a difunctional acrylic monomer for use in UV and EB curing formulations. This product features low viscosity, good weatherability, good cutting power, and good adhesion. SR341 resists crystallization at reduced temperatures and is especially suit...view more SR341 is a difunctional acrylic monomer for use in UV and EB curing formulations. This product features low viscosity, good weatherability, good cutting power, and good adhesion. SR341 resists crystallization at reduced temperatures and is especially suited to graphic arts and specialty coatings applications. view less | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations...view more DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
| Speedcure XFs | Lambson Group Ltd. | SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations...view more SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations. view less | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...view more DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. view less | |
| KRATON™ D0243 K | Univar Solutions | KRATON™ D0243 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesi...view more KRATON™ D0243 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. view less | Request Sample |
| KRATON™ G1643 M | Univar Solutions | KRATON™ G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealant...view more KRATON™ G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. view less | Request Sample |
| KRATON™ G1650 M | Univar Solutions | KRATON™ G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealant...view more KRATON™ G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. view less | Request Sample |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...view more D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. view less | |
| Pangel M100 | Tolsa, S.A. | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...view more Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. view less | |
| Pangel M150 | Tolsa, S.A. | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...view more Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. view less | |
| CN160 | Sartomer Americas | CN160 is an acrylated linseed oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks. CN160 can also be used in various energy curable formulations...view more CN160 is an acrylated linseed oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks. CN160 can also be used in various energy curable formulations to increase the hydrophobicity of these systems. view less | |
| REAXIS® C719 | Reaxis Inc. | REAXIS® C719 is a colorless to light yellow aqueous solution of Bi(CH3SO3)3 produced by a proprietary process from high purity raw materials. It is primarily used to replenish bismuth in bismuth and bismuth alloy plating baths. It is also used in elecrodepostion coating formulations...view more REAXIS® C719 is a colorless to light yellow aqueous solution of Bi(CH3SO3)3 produced by a proprietary process from high purity raw materials. It is primarily used to replenish bismuth in bismuth and bismuth alloy plating baths. It is also used in elecrodepostion coating formulations. view less | |
| Methylene Chloride - Aerosol Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in adhesive and paint formulations...view more Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in adhesive and paint formulations. view less | |
| Dynasylan® P | Evonik Operations GmbH, BL Silanes | Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations...view more Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations. view less | |
| Speedcure PBZ | Lambson Group Ltd. | SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations...view more SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations...view more DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
| DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations...view more DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
| Rotary Glass Batchers | Munson Machinery Co., Inc. | The Munson Glass Batcher is designed for blending of ingredients (including cullet) comprising glass formulations. While designed to meet glass industry requirements, the Munson Batcher is also well suited for mixing of ceramics, refractory products, powd...view more The Munson Glass Batcher is designed for blending of ingredients (including cullet) comprising glass formulations. While designed to meet glass industry requirements, the Munson Batcher is also well suited for mixing of ceramics, refractory products, powdered metal and other highly abrasive materials with extreme reliability and efficiency. view less |  |
| CN9021 | Sartomer Americas | CN9021 is a clear liquid acrylic ester. This product has been developed for UV/EB cured laminating and pressure-sensitive adhesives. CN9021 has good moisture resistance and high elongation. It also imparts excellent adhesion and flexibility to laminating and pressure-sensitive adhesive formulations...view more CN9021 is a clear liquid acrylic ester. This product has been developed for UV/EB cured laminating and pressure-sensitive adhesives. CN9021 has good moisture resistance and high elongation. It also imparts excellent adhesion and flexibility to laminating and pressure-sensitive adhesive formulations, especially those for glass. view less | |
| GENOMER* 5695 | Rahn USA Corp. | GENOMER* 5695 is a newly introduced product which brings value to LED curing. Formulations containing GENOMER* 5695 cure rapidly with UV/LED. The product brings improved reactivity and surface cure in UV applications. GENOMER* 5695 features good flexibili...view more GENOMER* 5695 is a newly introduced product which brings value to LED curing. Formulations containing GENOMER* 5695 cure rapidly with UV/LED. The product brings improved reactivity and surface cure in UV applications. GENOMER* 5695 features good flexibility, low yellowing and low odor and reduces oxygen inhibition. view less | Request Sample |
| KRATON™ G1657 M | Univar Solutions | KRATON™ G1657 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in f...view more KRATON™ G1657 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. view less | Request Sample |
| KRATON™ G1702 H | Univar Solutions | KRATON™ G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations...view more KRATON™ G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. view less | Request Sample |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations...view more Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. view less | |
| Speedcure BMS | Lambson Group Ltd. | SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations...view more SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Octotint 790 | Tiarco Chemical | Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations...view more Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. view less | |
| Speedcure 7005 | Lambson Group Ltd. | SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations...view more SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations. view less | |
| CN9018 | Sartomer Americas | CN9018 is a clear viscous liquid urethane acrylate oligomer. This product imparts excellent adhesion, and flexibility to laminating and pressure-sensitive adhesive formulations especially those for glass. It also has good moisture resistance and high elon...view more CN9018 is a clear viscous liquid urethane acrylate oligomer. This product imparts excellent adhesion, and flexibility to laminating and pressure-sensitive adhesive formulations especially those for glass. It also has good moisture resistance and high elongation. CN9018 has been developed for UV/EB cured laminating and pressure-sensitive adhesives. view less |
