| 2-Ethylhexanol | Perstorp | 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications. | |
| AC-76 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-76 is a Vinyltriisopropoxysilane with the chemical formula C11H24O3Si and comes as a clear and colorless liquid. It is primarily used as a monomer in acrylic emulsions in the production of paints and coatings. | |
| SR406 | Sartomer Americas | SR406 is a difunctional cycloaliphatic acrylate monomer that offers fast cure rates and produces hard, durable coatings with good clarity and adhesion to diverse substrates. | |
| GENORAD* 16 | Rahn USA Corp. | GENORAD* 16 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). The product has good solubility in acrylates and methacrylates, and it maintains reactivity and viscosity. Compared to hydroquinone (HQ...view more GENORAD* 16 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). The product has good solubility in acrylates and methacrylates, and it maintains reactivity and viscosity. Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 16 has low or no effect on the reactivity of the system. It can be used in offset inks, letterpress inks, screen inks, flexo inks, inkjet and wood applications. view less | Request Sample |
| RAYKOTE® 2001 | Specialty Polymers, Inc. | RAYKOTE® 2001 is an anionic styrene acrylic emulsion. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 2001 is primarily used for corrosion and water protection by being applied to light general industrial direct-to-metal ...view more RAYKOTE® 2001 is an anionic styrene acrylic emulsion. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 2001 is primarily used for corrosion and water protection by being applied to light general industrial direct-to-metal and primer applications. view less | |
| CN963J85 | Sartomer Americas | CN963J85 is an aliphatic polyester based urethane diacrylate oligomer blended with 15% SR506, isobornyl acrylate. It is a hard oligomer offering good weatherability and is non-yellowing. Adhesives, coatings, floor, metal, paper and wood coatings, electron...view more CN963J85 is an aliphatic polyester based urethane diacrylate oligomer blended with 15% SR506, isobornyl acrylate. It is a hard oligomer offering good weatherability and is non-yellowing. Adhesives, coatings, floor, metal, paper and wood coatings, electronics, photopolymers, photoresists, and inks are recommended uses for this product. view less | |
| StanChem SC 6957 | StanChem Polymers | StanChem SC 6957 is a small particle size styrene acrylic copolymer latex that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6957 exhibit high hardness, good clarity, water resistance, abrasion re...view more StanChem SC 6957 is a small particle size styrene acrylic copolymer latex that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6957 exhibit high hardness, good clarity, water resistance, abrasion resistance and excellent adhesion properties. view less | Request Sample |
| RHOPLEX™ HG-95P | Univar Solutions | RHOPLEX™ HG-95P is a 100% acrylic emulsion with ambient crosslinking was developed specifically for low VOC aqueous gloss enamels with excellent hardness, block resistance, durability and resistance to many household chemicals. It is recommended for inter...view more RHOPLEX™ HG-95P is a 100% acrylic emulsion with ambient crosslinking was developed specifically for low VOC aqueous gloss enamels with excellent hardness, block resistance, durability and resistance to many household chemicals. It is recommended for interior/exterior applications in both high gloss and semigloss finishes. view less | Request Sample |
| RHOPLEX™ SS-4 | Univar Solutions | RHOPLEX™ SS-4 is a 100% acrylic with quick drying tendencies that will resist the rigorous environments encountered on many exterior sports surfaces. It Offers a balance of excellent cost and performance characteristics with excellent pigment and sand bin...view more RHOPLEX™ SS-4 is a 100% acrylic with quick drying tendencies that will resist the rigorous environments encountered on many exterior sports surfaces. It Offers a balance of excellent cost and performance characteristics with excellent pigment and sand binding capacity, superior resistance to wear and quick drying capabilities. view less | Request Sample |
| Sancryl 825-60 X | Polidur San Luis | Sancryl 825-60 X is a thermoplastic acrylic resin at 60% solids in xylene. This product provides Excellent dry and film hardness, weather resistance, adhesion to metal and plastics and solvent release. It is for use in metal lacquers, coatings for dificul...view more Sancryl 825-60 X is a thermoplastic acrylic resin at 60% solids in xylene. This product provides Excellent dry and film hardness, weather resistance, adhesion to metal and plastics and solvent release. It is for use in metal lacquers, coatings for dificult ahesion plastics (abs,pp,etc) and concrete coatings. view less | |
| Flexipel S-11WS | Innovative Chemical Technologies, Inc. | Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in ...view more Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in water and has a boiling point of approximately 320 degrees Fahrenheit. view less | |
| BR-144H15 | Bomar, formerly Dymax Oligomers & Coatings | BR-144H15 is a trifunctional polyether urethane acrylate with excellent weather ability properties, fast cure speeds, and abrasion and solvent resistance. BR-144H15 is suitable for abrasion-resistant wood coatings, hydrolytically stable inks, and coatings...view more BR-144H15 is a trifunctional polyether urethane acrylate with excellent weather ability properties, fast cure speeds, and abrasion and solvent resistance. BR-144H15 is suitable for abrasion-resistant wood coatings, hydrolytically stable inks, and coatings requiring additional cure speed with multifunctional oligomers. view less | |
| ST-40UF | Chan Sieh Enterprises Co, Ltd. | ST-40UF is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product provides excellent water-resistance and mechanical stability. It can be used as a binder for hard-type non-woven fabrics. It is suitable for spray an...view more ST-40UF is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product provides excellent water-resistance and mechanical stability. It can be used as a binder for hard-type non-woven fabrics. It is suitable for spray and dipping applications. view less | |
| A-45U | Chan Sieh Enterprises Co, Ltd. | A-45U is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. It can be used as a fabric adhesive for non-woven fabrics. This product has a low pH value, provides excellent water- and solvent-resistance, and excellent mechanic...view more A-45U is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. It can be used as a fabric adhesive for non-woven fabrics. This product has a low pH value, provides excellent water- and solvent-resistance, and excellent mechanical stability. view less | |
| CN9006 | Sartomer Americas | CN9006 is a hexafunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating and ink applications requiring fast cure response, high hardness, excellent abrasion resistance and non-yellowing properties. Hardcoats, plastic coatings, fle...view more CN9006 is a hexafunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating and ink applications requiring fast cure response, high hardness, excellent abrasion resistance and non-yellowing properties. Hardcoats, plastic coatings, flexo and litho inks are the recommended uses for this product. view less | |
| CN966H90 | Sartomer Americas | CN966H90 is an aliphatic polyester based urethane diacrylate oligomer blended with 10% SR256, 2(2-ethoxyethoxy) ethyl acrylate. It is a highly flexible oligomer offering good weatherability. Suggested applications are pressure sensitive adhesives, metal c...view more CN966H90 is an aliphatic polyester based urethane diacrylate oligomer blended with 10% SR256, 2(2-ethoxyethoxy) ethyl acrylate. It is a highly flexible oligomer offering good weatherability. Suggested applications are pressure sensitive adhesives, metal coatings, inks and encapsulants electronics are the recommended uses for this product. view less | |
| CN973H85 | Sartomer Americas | CN973H85 is an aromatic polyester based urethane diacrylate oligomer blended with 15% SR256, 2(2-ethoxyethoxy) ethyl acrylate. It is a highly flexible hydrphobic oligomer. Suggested applications include: adhesives, coatings, metal, paper and wood, electro...view more CN973H85 is an aromatic polyester based urethane diacrylate oligomer blended with 15% SR256, 2(2-ethoxyethoxy) ethyl acrylate. It is a highly flexible hydrphobic oligomer. Suggested applications include: adhesives, coatings, metal, paper and wood, electronics, photopolymers, photoresists, inks, rubber and plastics and elastomers. view less | |
| CN983 | Sartomer Americas | CN983 is an aliphatic polyester based urethane diacrylate oligomer. It is a low molecular weight oligomer offering fast cure response and high crosslink density. It is Sartomer’s hardest urethane acrylate oligomer. Suggested applications include: coatings...view more CN983 is an aliphatic polyester based urethane diacrylate oligomer. It is a low molecular weight oligomer offering fast cure response and high crosslink density. It is Sartomer’s hardest urethane acrylate oligomer. Suggested applications include: coatings, floor, packaging, paper, plastic, and wood coatings, and inks. view less | |
| ACRONAL® NX 4569 | BASF Dispersions & Resins | ACRONAL NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suit...view more ACRONAL NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. view less | |
| StanChem SC 6829 | StanChem Polymers | StanChem SC 6829 is an all acrylic copolymer latex that provides excellent adhesion and flexibility to a variety of industrial coatings, sealants and adhesives. With its low glass transition temperature, SC 6829 is particularly suited for flexible wall ...view more StanChem SC 6829 is an all acrylic copolymer latex that provides excellent adhesion and flexibility to a variety of industrial coatings, sealants and adhesives. With its low glass transition temperature, SC 6829 is particularly suited for flexible wall and roof coatings requiring good dirt pick up resistance. view less | Request Sample |
| StanChem SC 6933 | StanChem Polymers | StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit goo...view more StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit good clarity, water resistance and excellent adhesion properties. view less | Request Sample |
| GENOMER* 4590/PP | Rahn USA Corp. | GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks ...view more GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; and wood and industrial coatings. The low viscosity in combination with the high functionality allows for an easy product handling. view less | Request Sample |
| SILQUEST* A-186 SILANE | Momentive Performance Materials | Epoxy functional silane which may be suitable for use as adhesion promoters in SPUR+*, urethane, epoxy, polysulfide, silicone, and acrylic caulks, coatings, sealants and adhesives. | |
| SILQUEST A-187 SILANE | Momentive Performance Materials | Epoxy functional silane which may be suitable for use as adhesion promoters in SPUR+*, urethane, epoxy, polysulfide, silicone, and acrylic caulks, coatings, sealants and adhesives. | |
| Pergut® S 40 | Covestro | Pergut® S 40 is a chlorinated rubber used as a binder for anti-corrosion coatings; combination binder for e.g. alkyd resins, acrylates and ketone resins. | |
| Pergut® S 5 | Covestro | Pergut® S 5 is a chlorinated rubber used as the binder for anti-corrosion coatings; combination binder for e.g. alkyd resins, acrylates and ketone resins. | |
| Texicryl® 13-307 | Scott Bader | Texicryl® 13-307 is a carboxylated acrylic copolymer emulsion thickener that can be used for thickening ceramic tile adhesives when structuring with clays is not appropriate. | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...view more UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. view less | |
| GENOMER* 4515 | Rahn USA Corp. | GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printin...view more GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printing. GENOMER* 4515 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
| ST-40-2H | Chan Sieh Enterprises Co, Ltd. | ST-40-2H is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product provides excellent water-resistance and mechanical stability. It can be used as a binder for hard-type non-woven fabrics. This product is suitable f...view more ST-40-2H is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product provides excellent water-resistance and mechanical stability. It can be used as a binder for hard-type non-woven fabrics. This product is suitable for spray and dipping. view less | |
| VINAVIL® 2405 | VINAVIL Americas Corp. | VINAVIL® 2405, in the form of a transparent film, is a vinyl acrylic emulsion that can be used as an adhesive for coated paper, cardboard, or recycled paper. This product offers a high gloss and dries very quickly. It can also be used in flooring adhesi...view more VINAVIL® 2405, in the form of a transparent film, is a vinyl acrylic emulsion that can be used as an adhesive for coated paper, cardboard, or recycled paper. This product offers a high gloss and dries very quickly. It can also be used in flooring adhesives. view less | |
| VINAVIL® 2414 | VINAVIL Americas Corp. | VINAVIL® 2414, in the form of a transparent film, is a vinyl acrylic emulsion that can be used as an adhesive for coated paper, cardboard, or recycled paper. This product offers high gloss and dries very quickly. It can also be used as a flooring adhesi...view more VINAVIL® 2414, in the form of a transparent film, is a vinyl acrylic emulsion that can be used as an adhesive for coated paper, cardboard, or recycled paper. This product offers high gloss and dries very quickly. It can also be used as a flooring adhesive. view less | |
| RHOPLEX™ WL-81 | Univar Solutions | RHOPLEX™ WL-81 is a thermoplastic, waterborne, acrylic polymer is specifically designed for clear and pigmented ambient or forced-air-dry industrial lacquers. It is suitable for use on a variety of substrates and offering benefits currently provided by so...view more RHOPLEX™ WL-81 is a thermoplastic, waterborne, acrylic polymer is specifically designed for clear and pigmented ambient or forced-air-dry industrial lacquers. It is suitable for use on a variety of substrates and offering benefits currently provided by solventborne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems. view less | Request Sample |
| RHOPLEX™ WL-96 | Univar Solutions | RHOPLEX™ WL-96 is a waterborne acrylic polymer used for low-VOC, brush-applied, interior clear wood finishes. It is well suited for finishing wood trim, doors, walls and floors. Formulation blends with polyurethane dispersions enhance hardness, stain and ...view more RHOPLEX™ WL-96 is a waterborne acrylic polymer used for low-VOC, brush-applied, interior clear wood finishes. It is well suited for finishing wood trim, doors, walls and floors. Formulation blends with polyurethane dispersions enhance hardness, stain and chemical resistance, and other performance characteristics. view less | Request Sample |
| StanChem SC 6735 | StanChem Polymers | StanChem SC 6735 is a small particle sized acrylic copolymer emulsion designed for specialty coatings applications requiring a tough, water-resistant, clear coating. SC 6735 is typically diluted with water before application. Dilution ratio can be from 3:...view more StanChem SC 6735 is a small particle sized acrylic copolymer emulsion designed for specialty coatings applications requiring a tough, water-resistant, clear coating. SC 6735 is typically diluted with water before application. Dilution ratio can be from 3:1 to 2:1 (latex to water). view less | Request Sample |
| GENOMER* 4514 | Rahn USA Corp. | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...view more GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
| Sancryl 864-60 AB | Polidur San Luis | Sancryl 864-60 AB is an hydroxylated acrylic resin at 60% solids in butyl acetate. This product offers excellent weather and yellowing resistance, gloss and mirror image (DOI). Sancryl 864-60 AB is for use in Two componet polyurethane lacquers, clear coa...view more Sancryl 864-60 AB is an hydroxylated acrylic resin at 60% solids in butyl acetate. This product offers excellent weather and yellowing resistance, gloss and mirror image (DOI). Sancryl 864-60 AB is for use in Two componet polyurethane lacquers, clear coat systems and top coats for the automotive industry. view less | |
| RAYKOTE® 1431 | Specialty Polymers, Inc. | RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufa...view more RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufactured interiors and exterior wood primers. view less | |
| StanChem SC 6261 | StanChem Polymers | StanChem SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention. | Request Sample |
| Acryline® DP EX | Isogama Industria Quimica Ltda. | Acryline® DP EX is a high performance acrylic dispersant. Acryline® DP EX is used as a dispersant for mineral fillers such as calcium carbonate, pigments, kaolin and other products for the construction industry, in the paint industry as a component in out...view more Acryline® DP EX is a high performance acrylic dispersant. Acryline® DP EX is used as a dispersant for mineral fillers such as calcium carbonate, pigments, kaolin and other products for the construction industry, in the paint industry as a component in outer and inner rows and paper industry for surface applications. view less | |
| BR-374 | Bomar, formerly Dymax Oligomers & Coatings | BR-374, a medium molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility, with very low color. Formulations with BR-374 yield high clarity films or tie layers with adhes...view more BR-374, a medium molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility, with very low color. Formulations with BR-374 yield high clarity films or tie layers with adhesion to a variety of substrates, making it ideal for laminating applications. view less | |
| BRS-14320S | Bomar, formerly Dymax Oligomers & Coatings | BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S ...view more BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications. view less | |
| DERMULSENE TR 602 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous resin dispersion based on a terpene phenolic resin. It is specifically designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| SR595 | Sartomer Americas | SR595 is an acrylate monomer that exhibits low odor with high reactivity. SR595 is useful in applications, such as coatings and digital and screen inks, where outdoor weathering resistance is needed. | |
| SR9045 | Sartomer Americas | SR9045 is an acrylate ester that demonstrates good pigment wetting, solvent resistance and flexibility in radiation curable ink and coating applications. SR9045 is particularly suited to plastic Substrates. | |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...view more DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. view less | Request Sample |
| Texicryl® 13-220 | Scott Bader | Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printi...view more Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printing on flat screen and rotary systems. Texicryl® 13-220 also offers good adhesion on most substrates, with flexibility also ideal at low temperatures. Texicryl® 13-220 is suitable for the making of non-woven and flocking adhesives whether by pulverization, foaming or full bath methods. view less | |
| Rheotech™ 3800 | Arkema Rheology & Specialty Additives | Rheotech™ 3800 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to ...view more Rheotech™ 3800 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by brush, especially for finishing touches. view less | Request Sample |
| CN2920 | Sartomer Americas | CN2920 is an aliphatic urethane acrylate oligomer developed for UV/EB curable inks, coatings and adhesives. It provides excellent hardness and weatherability. CN2920 also imparts chemical resistance, heat resistance, impact strength and low shrinkage. Su...view more CN2920 is an aliphatic urethane acrylate oligomer developed for UV/EB curable inks, coatings and adhesives. It provides excellent hardness and weatherability. CN2920 also imparts chemical resistance, heat resistance, impact strength and low shrinkage. Suggested applications include adhesives, coatings, and photopolymers and photoresists electronics, and screen inks. view less | |
| ACRONAL® A 110 | BASF Dispersions & Resins | ACRONAL A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removab...view more ACRONAL A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. view less | |
| RHOPLEX™ 2500 | Univar Solutions | RHOPLEX™ 2500 is an all-Acrylic Emulsion Polymer that is designed for tough, water-resistant masonry paints and primers. It possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), the ...view more RHOPLEX™ 2500 is an all-Acrylic Emulsion Polymer that is designed for tough, water-resistant masonry paints and primers. It possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), the ability to retard efflorescence in cured cementitious products and high pigment-binding capacity. view less | Request Sample |
| RHOPLEX™ EC-2848 | Univar Solutions | RHOPLEX™ EC-2848 is a 100% acrylic polymer emulsion for use in elastomeric wall coatings providing outstanding balance of elongation, tensile strength, and dirt pick-up resistance over a wide temperature range. The elongation and recovery properties of th...view more RHOPLEX™ EC-2848 is a 100% acrylic polymer emulsion for use in elastomeric wall coatings providing outstanding balance of elongation, tensile strength, and dirt pick-up resistance over a wide temperature range. The elongation and recovery properties of the polymer allow coatings to bridge dimensionally unstable cracks without rupturing. view less | Request Sample |
| RHOPLEX™ EP-6060 | Univar Solutions | RHOPLEX™ EP-6060 is an acrylic emulsion recommended for factory-applied interior wood coatings requiring early hardness, block resistance, and sandability. It can be used in clear formulations as a sealer and topcoat or in lightly pigmented (PVC 20%) coat...view more RHOPLEX™ EP-6060 is an acrylic emulsion recommended for factory-applied interior wood coatings requiring early hardness, block resistance, and sandability. It can be used in clear formulations as a sealer and topcoat or in lightly pigmented (PVC 20%) coatings. The wet and dry clarity of films are good, especially over light wood. view less | Request Sample |
| AD-752S | Chan Sieh Enterprises Co, Ltd. | AD-752S is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water resistance and adhesion strength, and is miscible with polyvinyl acetate emulsions. It can be used as an adhesiv...view more AD-752S is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water resistance and adhesion strength, and is miscible with polyvinyl acetate emulsions. It can be used as an adhesive binder for lamination of polyurethane sponges and nylon cloth. view less | |
| GENOMER* 4230 | Rahn USA Corp. | GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulat...view more GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations. This product is recommended for use in the following applications: coatings for metal and plastic; printing inks; laminating adhesives; and peroxide curing. view less | Request Sample |
| DERMULSENE 222 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on terpene and stabilized rosin ester. It is designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE RE 802 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on a stabilized rosin ester. It is designed specifically to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| SR257 | Sartomer Americas | SR-257, stearyl acrylate, is a monofunctional monomer with a long chain hydrophobic backbone. It may act as a bubble breaker. Suggested applications include: textile coatings and release coatings. | |
| MIRAMER M166 | Rahn USA Corp. | MIRAMER M166 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in pressure sensitive adhesives, plastic coatings and metal varnishes. | Request Sample |
| Soluryl RP-590 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RP-590 is a modified acryl-styrene copolymer for use in pre-print application. It provides heat resistance, anti-blocking properties, rub resistance, and high gloss. | |
| CN9062 | Sartomer Americas | CN9062 is a highly functional urethane acrylate that has applicability in dual cure systems. CN9062 produces hard, scratch resistance coatings. The oligomer has a hydroxyl value of 85 mg KOH /g, which allows for UV/EB and alternative curing mechanisms. Is...view more CN9062 is a highly functional urethane acrylate that has applicability in dual cure systems. CN9062 produces hard, scratch resistance coatings. The oligomer has a hydroxyl value of 85 mg KOH /g, which allows for UV/EB and alternative curing mechanisms. Is ideal for a wide use of applications such as coatings and inks. view less | |
| BR-344 | Bomar, formerly Dymax Oligomers & Coatings | BR-344, a high molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a cost-effective choice for coatings formulations that require weathering durability and non-yellowing characteristics. Formulations with BR-344 result in fl...view more BR-344, a high molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a cost-effective choice for coatings formulations that require weathering durability and non-yellowing characteristics. Formulations with BR-344 result in flexible yet durable, abrasion-resistant, non-yellowing systems of moderate- to low-viscosity. view less | |
| BR-641E | Bomar, formerly Dymax Oligomers & Coatings | BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to t...view more BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to thermal cycling and can withstand the temperature extremes typical of such tests without undue degradation of properties. view less | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...view more Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. view less | |
| CN966J75 | Sartomer Americas | CN966J75 is an aliphatic polyester based urethane diacrylate oligomer blended with 25% SR506, isobornyl acrylate. It is a highly flexible non-yellowing oligomer offering good weatherability and improves adhesion. Pressure sensitive adhesives, metal coatin...view more CN966J75 is an aliphatic polyester based urethane diacrylate oligomer blended with 25% SR506, isobornyl acrylate. It is a highly flexible non-yellowing oligomer offering good weatherability and improves adhesion. Pressure sensitive adhesives, metal coatings, inks, screen R. 8/03 inks, encapsulants and electronics are the recommended uses for this product. view less | |
| RHOPLEX™ CL-204 | Univar Solutions | RHOPLEX™ CL-204 is a acrylic emulsion designed for use in factory applied, clear topcoats over wood coatings which dry quickly and have early print and block resistance. It was also designed to minimize microfoam entrapment when coating conditions aren't ...view more RHOPLEX™ CL-204 is a acrylic emulsion designed for use in factory applied, clear topcoats over wood coatings which dry quickly and have early print and block resistance. It was also designed to minimize microfoam entrapment when coating conditions aren't ideal, which causes blemishes, haziness and clarity loss. view less | Request Sample |
| CN9021 | Sartomer Americas | CN9021 is a clear liquid acrylic ester. This product has been developed for UV/EB cured laminating and pressure-sensitive adhesives. CN9021 has good moisture resistance and high elongation. It also imparts excellent adhesion and flexibility to laminating ...view more CN9021 is a clear liquid acrylic ester. This product has been developed for UV/EB cured laminating and pressure-sensitive adhesives. CN9021 has good moisture resistance and high elongation. It also imparts excellent adhesion and flexibility to laminating and pressure-sensitive adhesive formulations, especially those for glass. view less | |
| AD-752S-1 | Chan Sieh Enterprises Co, Ltd. | AD-752S-1 is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water resistance and adhesion strength, and is miscible with polyvinyl acetate emulsions. It can be used as an adhesiv...view more AD-752S-1 is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water resistance and adhesion strength, and is miscible with polyvinyl acetate emulsions. It can be used as an adhesive binder for lamination of polyurethane sponges and nylon cloth. view less | |
| Acryline® RA S 50 G3 EX | Isogama Industria Quimica Ltda. | Acryline® RA S 50 G3 EX is a styrene-acrylic resin water emulsion. The Acryline® RA S 50 G3 EX assigns properties such as excellent film plasticity, brightness, adhesive strength and high resistance to water. It is compatible with most pigments and paint ...view more Acryline® RA S 50 G3 EX is a styrene-acrylic resin water emulsion. The Acryline® RA S 50 G3 EX assigns properties such as excellent film plasticity, brightness, adhesive strength and high resistance to water. It is compatible with most pigments and paint materials currently employed. view less | |
| StanChem SC 6477 | StanChem Polymers | StanChem SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide o...view more StanChem SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening. view less | Request Sample |
| BR-741 | Bomar, formerly Dymax Oligomers & Coatings | BR-741 is a low molecular weight, difunctional aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to steel, aluminum, and various plastics with some amount of surface energy. The resulting hard, tough film makes an effec...view more BR-741 is a low molecular weight, difunctional aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to steel, aluminum, and various plastics with some amount of surface energy. The resulting hard, tough film makes an effective protective coating, which will be non-yellowing, due to the aliphatic backbone of BR-741. view less | |
| BR-371B | Bomar, formerly Dymax Oligomers & Coatings | BR-371B, a low molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a great fit for coatings that require high tensile strength, superior hardness, scratch resistance, and weathering resistance. Formulations with BR-371B yiel...view more BR-371B, a low molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a great fit for coatings that require high tensile strength, superior hardness, scratch resistance, and weathering resistance. Formulations with BR-371B yield hard, clear, low-yellowing films. This is a reduced MEHQ version of BR-371S. view less | |
| DERMULSENE HBR 70 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on a hybrid rosin/hydrocarbon resin. It is designed specifically to tackify and wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| CN2261 | Sartomer Americas | CN2261 is a polyester acrylate oligomer. CN2261 was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261 demonstrates excellent cure rates. | |
| Chlorinated Rubber-YURON CR-90 | Yuron New Material | YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins. | |
| Texicryl® 13-308 | Scott Bader | Texicryl® 13-308 is a carboxylated acrylic copolymer emulsion designed as a thickener for water-based formulations. It is used in the formulation of paints, waterborne coating systems, and ceramic tile adhesives. | |
| VINAVIL® 5722 | VINAVIL Americas Corp. | VINAVIL® 5722, in the form of a transparent, flexible and tacky film, is an anionic/nonionic styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and as a mortar additive for the cement industry. It can also be used in wa...view more VINAVIL® 5722, in the form of a transparent, flexible and tacky film, is an anionic/nonionic styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and as a mortar additive for the cement industry. It can also be used in waterproofing membranes, wood flatting and primers, and in pressure-sensitive adhesives. view less | |
| VINAVIL® 2431 | VINAVIL Americas Corp. | VINAVIL® 2431, in the form of a transparent, clear, flexible and tacky film, is an anionic/nonionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive adhesives, especially in flooring applications. This product is compatible with ...view more VINAVIL® 2431, in the form of a transparent, clear, flexible and tacky film, is an anionic/nonionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive adhesives, especially in flooring applications. This product is compatible with organic resins and shows good balance of shear strength and residual tack. view less | |
| StanChem SC 6280 | StanChem Polymers | StanChem SC 6280 is a crosslinking styrene-acrylic polymer, which is useful in a variety of textile and non-woven applications. SC 6280 forms a clear film. It can be used to impart a soft stiffness of hand to all types of textiles and non-wovens. It is...view more StanChem SC 6280 is a crosslinking styrene-acrylic polymer, which is useful in a variety of textile and non-woven applications. SC 6280 forms a clear film. It can be used to impart a soft stiffness of hand to all types of textiles and non-wovens. It is recommended for use in fabric finishing, as an adhesive in laminating, and for bonding non-woven. view less | Request Sample |
| CN2207 | Sartomer Americas | CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and ver...view more CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and very fast cure speed. Suggested applications are coatings, metal and wood coatings, litho, offset and screen inks. view less | |
| Viscoatex™ 100 S | Arkema Rheology & Specialty Additives | Viscoatex™ 100 S is a powerful acrylic thickener. The high-viscosity formulations made with Viscoatex™ 100 S exhibit a smooth and easy flow. Primarily designed for water-based systems, it can also be used to thicken solvent-based formulations such as alco...view more Viscoatex™ 100 S is a powerful acrylic thickener. The high-viscosity formulations made with Viscoatex™ 100 S exhibit a smooth and easy flow. Primarily designed for water-based systems, it can also be used to thicken solvent-based formulations such as alcohol gels or petroleum-based solvents as long as it is used in combination with a polar solvent. view less | Request Sample |
| Humocer® 100 A 45 SP | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 SP is a great stable paraffin emulsion with excellent dispersion in watery way. Humocer® 100 A 45 SP is used as water repellent additive, applied as beating of water, lubricant and lifting of pattern agent in the inks and internal and ex...view more Humocer® 100 A 45 SP is a great stable paraffin emulsion with excellent dispersion in watery way. Humocer® 100 A 45 SP is used as water repellent additive, applied as beating of water, lubricant and lifting of pattern agent in the inks and internal and external coverings. Based on water beyond the masses with base acrylic resins and PVA. view less | |
| RHOPLEX™ MV-23 LO | Univar Solutions | RHOPLEX™ MV-23 LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repa...view more RHOPLEX™ MV-23 LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repaint surfaces, and stainblocking sealers that minimize the "bleed through" of wood tannins and common household stains. view less | Request Sample |
| RAYPLUS™ 1098 | Specialty Polymers, Inc. | RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resis...view more RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resistant to water, UV rays and chemical abrasion. view less | |
| VINAVIL® 5713 | VINAVIL Americas Corp. | VINAVIL® 5713, in the form of a bright, flexible and tacky film, is a styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and in mortar additives for the cement industry. It can also be used in flexible waterproof coatin...view more VINAVIL® 5713, in the form of a bright, flexible and tacky film, is a styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and in mortar additives for the cement industry. It can also be used in flexible waterproof coatings, caulks and sealants, and in flooring adhesives. view less | |
| VINAVIL® 4723NA | VINAVIL Americas Corp. | VINAVIL® 4723NA, in the form of a transparent, bright, flexible and non-tacky emulsion, is an anionic or non-ionic styrene/acrylic copolymer that can be used in water-based paints and primers. It can also be used in flooring adhesives. This product is co...view more VINAVIL® 4723NA, in the form of a transparent, bright, flexible and non-tacky emulsion, is an anionic or non-ionic styrene/acrylic copolymer that can be used in water-based paints and primers. It can also be used in flooring adhesives. This product is compatible with any paint additive in the market. view less | |
| VINAVIL® 4723NA (DS) | VINAVIL Americas Corp. | VINAVIL® 4723NA (DS), in the aspect of a transparent, bright, flexible and non-tacky emulsion, is an anionic or non-ionic styrene-acrylic copolymer that can be used in water-based paints, primers, and flooring adhesives. This product has compatibility wi...view more VINAVIL® 4723NA (DS), in the aspect of a transparent, bright, flexible and non-tacky emulsion, is an anionic or non-ionic styrene-acrylic copolymer that can be used in water-based paints, primers, and flooring adhesives. This product has compatibility with any paint additive found on the market. view less | |
| BR-345 | Bomar, formerly Dymax Oligomers & Coatings | BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins ...view more BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins with less than 1000 cps can be formulated with this material when monomer levels are above 50%. view less | |
| BR-582E8 | Bomar, formerly Dymax Oligomers & Coatings | BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact ...view more BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact and bend-resistant coatings. BR-582E8 also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. view less | |
| BR-643 | Bomar, formerly Dymax Oligomers & Coatings | BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-...view more BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-643 withstands the extremes of temperature typical of such tests, without undue degradation of properties. view less | |
| BR-742S | Bomar, formerly Dymax Oligomers & Coatings | BR-742S is a difunctional polyester urethane acrylate oligomer that offers good weather ability. High-impact-strength coatings and inks can be formulated that is non-yellowing and have a high gloss. This material offers low shrinkage, which is excellent f...view more BR-742S is a difunctional polyester urethane acrylate oligomer that offers good weather ability. High-impact-strength coatings and inks can be formulated that is non-yellowing and have a high gloss. This material offers low shrinkage, which is excellent for 3D printing applications. Furthermore, BR-742S is registered with INCI for cosmetic applications. view less | |
| BR-744BT | Bomar, formerly Dymax Oligomers & Coatings | BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail ge...view more BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail gel polishes. This material has low skin sensitivity for dental and cosmetic applications and is INCI listed. view less | |
| RAYCRYL® 1240 | Specialty Polymers, Inc. | RAYCRYL® 1240 is anionic all-acrylic emulsion. This product can be used in metal and wood applications. RAYCRYL® 1240 primary use is as a sanding sealer, it adheres to metal or wood surfaces and has minimal grain raise and fills in the pours after the sur...view more RAYCRYL® 1240 is anionic all-acrylic emulsion. This product can be used in metal and wood applications. RAYCRYL® 1240 primary use is as a sanding sealer, it adheres to metal or wood surfaces and has minimal grain raise and fills in the pours after the surface has been sanded to seal the surface. view less | |
| Sancryl 884-50 ABX | Polidur San Luis | Sancryl 884-50 ABX is an hydroxylated acrylic resin at 50% in butyl acetate:xilol (1:1). This product presents excellent sandability of primers for wood, excellent yelowing resistance and very fast drying and good hardness. It is for use in two component ...view more Sancryl 884-50 ABX is an hydroxylated acrylic resin at 50% in butyl acetate:xilol (1:1). This product presents excellent sandability of primers for wood, excellent yelowing resistance and very fast drying and good hardness. It is for use in two component polyurethane primers for wood, two component polyurethane lacquers for wood and two component polyurethane lacquers for machinery. view less | |
| GENOMER* 4425 | Rahn USA Corp. | GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are require...view more GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are required. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastics and metal; wood coatings; flexo inks; and screen inks. view less | Request Sample |
| GENOMER* 4312TF | Rahn USA Corp. | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...view more GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. view less | Request Sample |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Chemisnow® MX-80H3wT | Kowa American Corporation | Chemisnow® MX-80H3wT is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-150 | Kowa American Corporation | Chemisnow® MX-150 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
