| PLIOLITE® VTAC-L | Synthomer | PLIOLITE® VTAC-L is a highly soluble, vinyl toluene-acrylate copolymer that forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance. Newtonian resin soluble in mineral spirits, for formulation of flat or textured masonry coatings, alkali resistant primer...view more PLIOLITE® VTAC-L is a highly soluble, vinyl toluene-acrylate copolymer that forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance. Newtonian resin soluble in mineral spirits, for formulation of flat or textured masonry coatings, alkali resistant primers, anticorrosion paints and intumescent coatings. view less | |
| PLIOTEC™ HDT12 | Synthomer | PLIOTEC™ HDT12 is a modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments. PLIOTEC™ HDT12 is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primer...view more PLIOTEC™ HDT12 is a modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments. PLIOTEC™ HDT12 is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primers. view less | |
| K-FLEX® 850S Low-VOC Coalescent | LANXESS (former Emerald Performance Materials) | K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and indus...view more K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and industrial and protective coatings. It is also effective in nitrocellulosic and acrylic lacquers. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| WorléeKyd L 138 | Worlée-Chemie G.m.b.H. | WorléeKyd L 138 is a short oil phenolic modified alkyd resin suitable for the manufacture of air drying and stoving primers, under coats, surfacers, and fillers. This grade has a non-volatile content of 60% ± 1. W´Kyd L 138 is compatible with most short o...view more WorléeKyd L 138 is a short oil phenolic modified alkyd resin suitable for the manufacture of air drying and stoving primers, under coats, surfacers, and fillers. This grade has a non-volatile content of 60% ± 1. W´Kyd L 138 is compatible with most short oil alkyds and with some medium oil length alkyds and nitro cellulose. To reduce the viscosity and improve viscosity stability in heavily filled systems, a small addition of an alcohol, e.g. butanol is recommended. view less | |
| WorléeKyd SM 426 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 426 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 426 is compatible with most short oil and some medium oil le...view more WorléeKyd SM 426 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 426 is compatible with most short oil and some medium oil length alkyd resins. W´Kyd SM 426 is also compatible with the most usual butylated and iso butylated urea and melamine resins as well as with resin esters, maleic resins and modified phenolic resins. view less | |
| WorléeThix 670 HS | Worlée-Chemie G.m.b.H. | WorléeThix 670 HS is a thixotropic long oil alkyd resin, mainly for the manufacture of primers, filler, gloss paints, and silk gloss paints. This grade has a low VOC and a non volatile content of 70% ± 2. W´Thix 670 hs is compatible with most medium and l...view more WorléeThix 670 HS is a thixotropic long oil alkyd resin, mainly for the manufacture of primers, filler, gloss paints, and silk gloss paints. This grade has a low VOC and a non volatile content of 70% ± 2. W´Thix 670 hs is compatible with most medium and long oil air drying alkyd resins. It is also compatible with the common maleic and phenolic modified hard resins. Main application fields are high solid, solvent based, air drying primers, gloss paints, silk gloss paints and glazings for decorative paints, especially with regard to the stricter VOC limit values from 2010 on. W´Thix 670 hs can be used either as a sole binder or as an additional binder (e. g. in combination with W´Kyd SD 7003, 85% in dearomatized HC 160-200). view less | |
| HALOX® 650 | ICL Phosphate Specialty | HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primer...view more HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primers based on PVB. It is suitable for solvent-based polyurethanes, short-, medium- & long oil alkyds, and silicones. It is also suitable for clear coats, thin films, and aerospace coating. The dosage level of the grade is 1-3% based on total formulation solids. HALOX® 650 has a shelf life of 36 months. view less | Request Sample |
| WorléeKyd B 865 U NV | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U NV is an isocyanate modified, long oil alkyd. This grade has a non volatile content of 60% ± 1. W´Kyd B 865 U nv is mainly recommended as the only binder or in combination with long oil alkyd resins for wood varnishes, parquet sealers, primer...view more WorléeKyd B 865 U NV is an isocyanate modified, long oil alkyd. This grade has a non volatile content of 60% ± 1. W´Kyd B 865 U nv is mainly recommended as the only binder or in combination with long oil alkyd resins for wood varnishes, parquet sealers, primers, undercoat lacquers and fast drying top coats. view less | |
| WorléeDur H 90 | Worlée-Chemie G.m.b.H. | WorléeDur H 90 is a low viscous, solvent free epoxy curing agent based on a polyamine adduct. This product is mainly used as a curing agent in solvent free and self-levelling epoxy flooring systems. Systems cured with WorléeDur H 90 will provide good surface properties and short times to achieve complete cure. It is also suitable for primer...view more WorléeDur H 90 is a low viscous, solvent free epoxy curing agent based on a polyamine adduct. This product is mainly used as a curing agent in solvent free and self-levelling epoxy flooring systems. Systems cured with WorléeDur H 90 will provide good surface properties and short times to achieve complete cure. It is also suitable for primers. view less | |
| WorléeFen F 105 | Worlée-Chemie G.m.b.H. | WorléeFen F 105 is an oil soluble phenolic modified hard resin. It is used in combination with oils and alkyds in paints and coatings to impart excellent hardening and weather resistance. W´Fen F 105 is compatible with drying short, medium and long oil alkyds. This product is used as a resin of addition in primer...view more WorléeFen F 105 is an oil soluble phenolic modified hard resin. It is used in combination with oils and alkyds in paints and coatings to impart excellent hardening and weather resistance. W´Fen F 105 is compatible with drying short, medium and long oil alkyds. This product is used as a resin of addition in primers and in anti-corrosive, marine and do-it-yourself paints. view less | |
| WorléeThix S 6357 (40% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In Dearomatized HC 180-220) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W...view more WorléeThix S 6357 (40% In Dearomatized HC 180-220) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. view less | |
| Idroben 878 | Benasedo | Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (6...view more Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (60%) BG, a colour [G.H.] maximum, and an A.V. solids amount of 45-55. This product has bake applications. view less | |
| Idroben 180 | Benasedo | Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a w...view more Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a white milky colour, has a pH level of 7.0-8.0, a solids content of 44%, and a viscosity [Brookf.] m Pa.s of 700-1000. view less | |
| HS11-70D | Tianyi Chemical Engineering Material Co., Ltd. | HS11-70D, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane matte exterior coatings and primers. This product has a high carboxyl group content, which makes the end prod...view more HS11-70D, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane matte exterior coatings and primers. This product has a high carboxyl group content, which makes the end product dry faster. The end product will also have a brighter color and higher hardness. view less | |
| Picassian® AC-280 | Stahl Polymers | Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistan...view more Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistance properties, good humidity resistance properties, good adhesion properties on many types of substrates, and good mechanical properties. view less | |
| BS-1C-FA Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BS-1C-FA is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low, medium and high polarity. It offers high gelling efficiency, ease of incorporation, excellent sag resistance, and good thickening properties. This product is recommended for marine paints, foundry paints, printing inks, anti-corrosion paints, automobile primer...view more BS-1C-FA is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low, medium and high polarity. It offers high gelling efficiency, ease of incorporation, excellent sag resistance, and good thickening properties. This product is recommended for marine paints, foundry paints, printing inks, anti-corrosion paints, automobile primers, industrial paints, and adhesives. view less | |
| BS-1C-FL Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BS-1C-FL is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium and part of high polarity. It offers high gelling efficiency, high viscosity and excellent thickening, and imparts particle suspension properties. This product is recommended for marine paints, inks and printing inks, anti-corrosion paints, automobile primer...view more BS-1C-FL is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium and part of high polarity. It offers high gelling efficiency, high viscosity and excellent thickening, and imparts particle suspension properties. This product is recommended for marine paints, inks and printing inks, anti-corrosion paints, automobile primers, industrial paints, and adhesives. view less | |
| Alkipol 307-50 T | Polidur San Luis | Alkipol 307-50 T is a short oil alkyd resin based on linseed oil. This product has good air drying properties, excellent hardness and good gloss and elasticity. Alkipol 307-50 T has applications in stoving enamels, fast drying enamels, varnishes for electrical uses, corrosion resistant primer...view more Alkipol 307-50 T is a short oil alkyd resin based on linseed oil. This product has good air drying properties, excellent hardness and good gloss and elasticity. Alkipol 307-50 T has applications in stoving enamels, fast drying enamels, varnishes for electrical uses, corrosion resistant primers and cellulose nitrate lacquers. view less | |
| Acriten 350 B | Sygla Colombiana | Acriten 350 B is an ion aqueous dispersion, of an acrylic copolymer. It is a styrene with slightly high flexibility, is moisture resistant and free from plasticizer. Acriten 350 B is used to manufacture waterproof elastic adhesives withexcellent moisture resistance, primer...view more Acriten 350 B is an ion aqueous dispersion, of an acrylic copolymer. It is a styrene with slightly high flexibility, is moisture resistant and free from plasticizer. Acriten 350 B is used to manufacture waterproof elastic adhesives withexcellent moisture resistance, primers, adhesives, tile adhesives, cement paste new to old concrete. It is also for coating and laminating (BONDEO) textiles. view less | |
| Araldite® GZ 280 X 80 | Jubail Chemical Industries Co. | Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is used in the formulation for primer...view more Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is used in the formulation for primers and finishing paints applied on metal substrates. view less | |
| D.E.R.™ 684-EK40 | Univar Solutions | D.E.R.™ 684-EK40 is a solution of an ultra-high molecular weight epoxy resin. It has essentially no epoxy functionality and provides coatings with outstanding physical and chemical resistance properties by solvent evaporation alone. Main applications include maintenance and flash primer...view more D.E.R.™ 684-EK40 is a solution of an ultra-high molecular weight epoxy resin. It has essentially no epoxy functionality and provides coatings with outstanding physical and chemical resistance properties by solvent evaporation alone. Main applications include maintenance and flash primers, shop coats, wire enamels, road markers and clear coatings for brass, chrome and aluminum. view less | |
| Epotec® TH 7301 | Aditya Birla | Epotec® TH 7301 is a low viscosity, low color, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high solid coatings, self-leveling flooring applications, primer...view more Epotec® TH 7301 is a low viscosity, low color, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high solid coatings, self-leveling flooring applications, primers & screeds, transparent coatings, and chemical resistant linings. view less | |
| Benester 896 | Benasedo | Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers...view more Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers and enamels, particularly for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. view less | |
| IDROBEN PD 717 | Benasedo | IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plas...view more IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plastics (ABS.Polystyrene etc.), glass and metals, endowed with very good hardness, good resistance to organic solvents like gasoline and ethanol. view less | |
| PLIOLITE® AC4 | Synthomer | PLIOLITE® AC4 is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based thixotropic resin for low to high textured exterior masonry coatings, primer...view more PLIOLITE® AC4 is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based thixotropic resin for low to high textured exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings. view less | |
| PLIOLITE® AC5-G | Synthomer | PLIOLITE® AC5G is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based pseudoplastic resin for low to high build exterior masonry coatings, primer...view more PLIOLITE® AC5G is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based pseudoplastic resin for low to high build exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings. view less | |
| WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) | Worlée-Chemie G.m.b.H. | WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short ...view more WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length alkyd resins. It is also compatible with some physical drying binders like vinyl mix polymerisates (e.g. Laroflex from BASF) and chlorinated rubber (e.g. Pergut from Bayer). view less | |
| CYMEL® U-80 | Allnex | CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primer...view more CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primers for automotive, general industrial, and container coatings providing improved film flexibility and adhesion and to various substrates. view less | Request Sample |
| Idroben EP 5595 | Benasedo | Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. Thi...view more Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. This product has a colour [G.H.] maximum of 12, an A.V. solids content of 45-55, and a viscosity [G.H.] of Z-Z2. view less | |
| WorléeKyd L 7904 | Worlée-Chemie G.m.b.H. | WorléeKyd L 7904 is a low viscosity linseed oil based alkyd resin for the production of high solid paint systems. W´Kyd L 7904 is compatible with most air-drying medium and long oil alkyd resins. W´Kyd L 7904 is particularly suitable for manufacturing of high solid glazings, clear lacquers and high solid anticorrosion primer...view more WorléeKyd L 7904 is a low viscosity linseed oil based alkyd resin for the production of high solid paint systems. W´Kyd L 7904 is compatible with most air-drying medium and long oil alkyd resins. W´Kyd L 7904 is particularly suitable for manufacturing of high solid glazings, clear lacquers and high solid anticorrosion primers. view less | |
| Benasol 5097 in White Spirit | Benasedo | Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of...view more Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of X-Z, an A.V. solids amount of 6-15, and a color [G.H] max. of 9. Its application is for air. view less | |
| DAOTAN® TW 6425/40WA | Allnex | Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primer...view more Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM. view less | Request Sample |
| 2-Hydroxyethyl Methacrylate (HEMA), First Grade | JURONG CHEMICAL | 2-Hydroxyethyl Methacrylate (HEMA), first grade, in the form of a colorless, clear liquid, is a functional monomer that can copolymerize with other monomers to produce copolymers with a hydroxy group in the side chain. The most important application of hema is the production of coatings and primer...view more 2-Hydroxyethyl Methacrylate (HEMA), first grade, in the form of a colorless, clear liquid, is a functional monomer that can copolymerize with other monomers to produce copolymers with a hydroxy group in the side chain. The most important application of hema is the production of coatings and primers for auto applications. Because of its vinyl double bond, this product can copolymerize with other monomers to produce copolymers with hydroxy groups. view less | |
| Pansil UltraSpheres™ 4000 | Tolsa SA | Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primer...view more Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primers. view less | |
| UCECOAT® 7717 | Allnex | UCECOAT® 7717 is a solvent free, energy curable polyurethane dispersion, with low tack after drying and before UV/EB curing. The special combination of low tack, and not physically drying before cure, makes UCECOAT® 7717 the ideal product for high “Anfeuerung” primer...view more UCECOAT® 7717 is a solvent free, energy curable polyurethane dispersion, with low tack after drying and before UV/EB curing. The special combination of low tack, and not physically drying before cure, makes UCECOAT® 7717 the ideal product for high “Anfeuerung” primers and combined applications with stains. UCECOAT® 7717 can be applied by spray or roller coater. view less | Request Sample |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...view more Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. view less | |
| Razeen® SL 4150 X 90 | Jubail Chemical Industries Co. | Razeen® SL 4150 X 90 is a semi-solid epoxy resin based on Bisphenol A as a solvent cut 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 4150 X 90 is used in the formulation of primer...view more Razeen® SL 4150 X 90 is a semi-solid epoxy resin based on Bisphenol A as a solvent cut 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 4150 X 90 is used in the formulation of primers and finishing paints applied on metal substrates and in high solids coatings. view less | |
| Epotec® TH 7902 | Aditya Birla | Epotec® TH 7902 is a a low viscosity, modified, phenol-free, cycloaliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical resistant high solids coatings, chemical resistant flooring coatings, and concrete primer...view more Epotec® TH 7902 is a a low viscosity, modified, phenol-free, cycloaliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical resistant high solids coatings, chemical resistant flooring coatings, and concrete primers & repair compounds. view less | |
| Epotec® RD 108 | Aditya Birla | Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal for use in self-leveling flooring & screed applications, metal and concrete primer...view more Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal for use in self-leveling flooring & screed applications, metal and concrete primers & coatings, and general purpose adhesives. view less | |
| Epotec® YD 019 | Aditya Birla | Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primer...view more Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less | |
| Benester 839 | Benasedo | Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industrial baking primer...view more Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industrial baking primers and enamels, especially for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. view less | |
| PLIOTEC® HDT16 | Synthomer | PLIOTEC® HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more). Water-based resin for anti-corrosion paints and primer...view more PLIOTEC® HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more). Water-based resin for anti-corrosion paints and primers, Direct-To-Metal (DTM) coatings and multi-surface renovation paints. view less | |
| PLIOWAY® ECT | Synthomer | PLIOWAY® ECT is a partially crosslinked, vinyl-acrylate copolymer, soluble in low odour, dearomatized aliphatic solvents, mainly used in combination with PLIOWAY® EC1, eliminating the need for external thickeners which can often be detrimental to film performance. Rheological resin for formulation of low odour stain blocking primer...view more PLIOWAY® ECT is a partially crosslinked, vinyl-acrylate copolymer, soluble in low odour, dearomatized aliphatic solvents, mainly used in combination with PLIOWAY® EC1, eliminating the need for external thickeners which can often be detrimental to film performance. Rheological resin for formulation of low odour stain blocking primers, water proofing sealers, correction fluids and intumescent coatings. view less | |
| PLIOWAY® ULTRA G20 | Synthomer | PLIOWAY® ULTRA G20 is a vinyl-acrylate copolymer, soluble in odourless isoparaffinic solvents and used in combination with PLIOWAY® ULTRA 200 or ULTRA 350LV, eliminating the need for external thickeners which can often be detrimental to film performance. Pseudoplastic rheological resin for formulation of odourless stain blocking primer...view more PLIOWAY® ULTRA G20 is a vinyl-acrylate copolymer, soluble in odourless isoparaffinic solvents and used in combination with PLIOWAY® ULTRA 200 or ULTRA 350LV, eliminating the need for external thickeners which can often be detrimental to film performance. Pseudoplastic rheological resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids and intumescent coatings. view less | |
| WorléeThix SD 6051 (55% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix SD 6051 (55% In Dearomatized HC 180-220) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. W´Thix SD 6051 is compatible with most medium and long oil air drying alkyd resins...view more WorléeThix SD 6051 (55% In Dearomatized HC 180-220) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. W´Thix SD 6051 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with the common maleic and phenolic modified hard resins. This grade has a non volatile content of 55% ± 2. All these paint systems show very good application properties while brushing rolling and spraying. W´Thix SD 6051 reduces sagging from vertical surfaces. view less | |
| Ancamide® 2396 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2396 Curing Agent is a modified amidoamine intended for use at ambient temperature with liquid epoxy resins. Compared with standard amidoamines, it imparts better chemical resistance, improved film appearance, better low temperature cure and resistance to blush. Ancamide® 2396 Curing Agent is ideal for systems applied to concrete, such as trowelable flooring, self-leveling flooring, grouts and concrete primer...view more Ancamide® 2396 Curing Agent is a modified amidoamine intended for use at ambient temperature with liquid epoxy resins. Compared with standard amidoamines, it imparts better chemical resistance, improved film appearance, better low temperature cure and resistance to blush. Ancamide® 2396 Curing Agent is ideal for systems applied to concrete, such as trowelable flooring, self-leveling flooring, grouts and concrete primers. view less | Request Sample |
| THIXATROL® P220X - MF | Elementis | THIXATROL® P220X - MF is a 20% active, opaque pre-dispersion of a polyamide in xylene. It is easy to incorporate and can be applied in a variety of solvent-borne systems. It provides excellent thixotropy and sag control along with increased anti-settling properties. Ideal for use in industrial maintenance coatings, refinishing topcoats and primer...view more THIXATROL® P220X - MF is a 20% active, opaque pre-dispersion of a polyamide in xylene. It is easy to incorporate and can be applied in a variety of solvent-borne systems. It provides excellent thixotropy and sag control along with increased anti-settling properties. Ideal for use in industrial maintenance coatings, refinishing topcoats and primers, marine and aerospace and heavy duty coatings, protective coatings and wood coatings. view less | |
| Idroben 828 | Benasedo | Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids ...view more Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids amount. Idroben 828 has a viscosity [G.H.] of Z4-Z6, an A.V. solids content of 37-44, and a colour [G.H.] maximum of 3. view less | |
| CYMEL® 325 | Allnex | CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primer...view more CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings. view less | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| PLASTI-GRIT® TYPE III: MELAMINE | Composition Materials Co., Inc. | PLASTI-GRIT® TYPE III: MELAMINE is a thermoset Melamine Formaldehyde which meets the specifications of MIL-P-85891A. It is effective for mold cleaning; stripping paints, primers and coatings from steel and hard surfaces; and removing grit & grime from eng...view more PLASTI-GRIT® TYPE III: MELAMINE is a thermoset Melamine Formaldehyde which meets the specifications of MIL-P-85891A. It is effective for mold cleaning; stripping paints, primers and coatings from steel and hard surfaces; and removing grit & grime from engines, turbines and parts. In mold cleaning, Melamine does not damage molds and is therefore an excellent replacement to glass beads and other hard abrasives. view less | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primer...view more CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. view less | |
| MAINCOTE™ PR-15 | Univar Solutions | MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be ...view more MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be formulated into high-quality OEM and general industrial topcoat finishes for steel substrates treated with zinc or iron phosphate. view less | |
| Epotec® YD 019S | Aditya Birla | Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primer...view more Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less | |
| Epotec® YD 909 | Aditya Birla | Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primer...view more Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less | |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...view more DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| WorléeKyd B 850 U | Worlée-Chemie G.m.b.H. | WorléeKyd B 850 U is a urethane modified medium oil alkdy resin, which is used for the manufacture of high quality industrial primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd B 850 U is compatible with the majority of medium-...view more WorléeKyd B 850 U is a urethane modified medium oil alkdy resin, which is used for the manufacture of high quality industrial primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd B 850 U is compatible with the majority of medium- and long oil air drying alkyd resins. It is also compatible with most of maleic and phenolic modified hard resins. This product exhibits white spirit dilutability, very fast drying and through drying. These advantageous drying properties enable fast tape resistance and good recoatability. It is an alternative to vinyl toluene alkyds. view less | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primer...view more Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. view less | |
| SILRES® BS 1306 | Wacker Chemical Corporation | SILRES® BS 1306 is a solventless water-thinnable emulsion of a polysiloxane modified with functional silicone resin. It is an additive used in the manufacture of aqueous masonry coatings and aqueous primers to enhance water repellency, water resistance an...view more SILRES® BS 1306 is a solventless water-thinnable emulsion of a polysiloxane modified with functional silicone resin. It is an additive used in the manufacture of aqueous masonry coatings and aqueous primers to enhance water repellency, water resistance and water-vapour permeability. It also improves the processability and antiblock characteristics of the aqueous coatings. It is applied in coatings, facade coatings, plasters, silicate, silicate emulsion paints and silicone resin emulsion paints. view less | |
| WorléeThix V 747 (50%-54% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 747 (50%-54% In Isoparaffin HC 170-200) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of ...view more WorléeThix V 747 (50%-54% In Isoparaffin HC 170-200) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of 52% ± 2. With the addition of W´Thix V 747, thick layer anti corrosion systems for the heavy corrosion protection can be produced. view less | |
| ANTI-TERRA®-203 | BYK | ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primer...view more ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances. view less | |
| Pangel OMD1 | Tolsa SA | Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, polyester coatings, primer...view more Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, varnishes, lubricating greases, and bituminous undercoats. view less | |
| BS-1C-A11 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BS-1C-A11 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. It has high gelling efficiency, high viscosity, and excellent thickening properties, and also imparts particle suspension. This product is recommended for a wide range of applications, including alkyd paints, anti-corrosion paints, marine paints, primer...view more BS-1C-A11 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. It has high gelling efficiency, high viscosity, and excellent thickening properties, and also imparts particle suspension. This product is recommended for a wide range of applications, including alkyd paints, anti-corrosion paints, marine paints, primers, road paints, inks, adhesives, sealants, lubricating grease, and more. view less | |
| Vamcril 2057 NF | Sygla Colombiana | Vamcril 2057 NF is a vinyl copolymer acrylic and functional silane monomer with excellent performance in vinyl formulation type 1 and fine 2. This product gives excellent ease of cleaning, resistance to abrasion, improvement hiding power, alkalinity resistance improvement and highlights development of colors. Vamcril 2057 NF is used for paint manufacturing with high performance, finishes and high strength, primer...view more Vamcril 2057 NF is a vinyl copolymer acrylic and functional silane monomer with excellent performance in vinyl formulation type 1 and fine 2. This product gives excellent ease of cleaning, resistance to abrasion, improvement hiding power, alkalinity resistance improvement and highlights development of colors. Vamcril 2057 NF is used for paint manufacturing with high performance, finishes and high strength, primers, plasters, graniplast and carraplast. view less | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...view more Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. view less | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primer...view more CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. view less | |
| Epotec® YD 017 | Aditya Birla | Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primer...view more Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. view less | |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| 4778-X-50 Phenolic/rosin Modified Alkyd Resin | Gabriel Performance Products | 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...view more 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. view less | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primer...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less | |
| REVACRYL™ AE 3737 | Synthomer | REVACRYL™ AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers, and ammonia. REVACRYL™ AE 3737 is a low MFFT styrene-acrylic dispersion with high water-resistance, excellent wet adhesion and good flexibility. It is highly recommended for ETICS-primer...view more REVACRYL™ AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers, and ammonia. REVACRYL™ AE 3737 is a low MFFT styrene-acrylic dispersion with high water-resistance, excellent wet adhesion and good flexibility. It is highly recommended for ETICS-primers and renders. view less | |
| EpsilonBlack 105 | Hangzhou Epsilon Chemical Co., Ltd. | EpsilonBlack 105 is a regular coloring carbon black pigment. It is a black granular or fine powder with a blue or red undertone. It is easy to disperse, and offers good flow and jetness. This product is used in primers, powder coatings, wood coatings, off...view more EpsilonBlack 105 is a regular coloring carbon black pigment. It is a black granular or fine powder with a blue or red undertone. It is easy to disperse, and offers good flow and jetness. This product is used in primers, powder coatings, wood coatings, offset inks, gravure solvent based inks, polyamide inks, NC inks, CLPP inks, polyurethane inks, flexo water based inks, master batches, wire and cable. view less | |
| PAT-ADD DA 1666 | Patcham USA | PAT-ADD DA 1666 is a liquid pigment wetting and dispersing additive for solvent-borne architectural and industrial paints. Additionally, the product can be used as a polar activator for bentonites. It acts as a wetting agent, preventing pigment agglomeration and sedimentation. Main benefits are: excellent gelling agent for organo clay thickeners, provides excellent anti-sedimentation features, excellent performance in solventborne paints and primer...view more PAT-ADD DA 1666 is a liquid pigment wetting and dispersing additive for solvent-borne architectural and industrial paints. Additionally, the product can be used as a polar activator for bentonites. It acts as a wetting agent, preventing pigment agglomeration and sedimentation. Main benefits are: excellent gelling agent for organo clay thickeners, provides excellent anti-sedimentation features, excellent performance in solventborne paints and primers, and prevents pigment flocculation. view less | Request Sample |
| WorléeKyd MH 439 (60% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeKyd MH 439 (60% In Xylene) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length ...view more WorléeKyd MH 439 (60% In Xylene) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length alkyd resins. It is also compatible with some physical drying binders like vinyl mix polymerisates (e.g. Laroflex from BASF) and chlorinated rubber (e.g. Pergut from Bayer). W´Kyd MH 439 can also be used for fast drying and high resistant industrial enamels. view less | |
| SYLOSIV® A 4 | Univar Solutions | SYLOSIV® A 4 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve - with pore openings of approximately 4 Å. This product is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Typical areas of application are two-component polyurethane systems (coatings, adhesives, sealants) and metallic pigment coatings (zinc-rich primer...view more SYLOSIV® A 4 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve - with pore openings of approximately 4 Å. This product is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Typical areas of application are two-component polyurethane systems (coatings, adhesives, sealants) and metallic pigment coatings (zinc-rich primers, aluminium paints). view less | |
| WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...view more WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| WorléeThix V 727 (50%-54% White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% White Spirit 180-210) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compat...view more WorléeThix V 727 (50%-54% White Spirit 180-210) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| Pangel OM4 | Tolsa SA | Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and high viscosity and consistency over a wide temperature range. it can be used in anti-corrosive paints, polyester coatings, primer...view more Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and high viscosity and consistency over a wide temperature range. it can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes road marking paints, varnishes, lubricating greases, and bituminous undercoats. view less | |
| CHS-Epoxy 210 X 75 | Spolchemie | CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance two components coating materials such as anti-corrosion primer...view more CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance two components coating materials such as anti-corrosion primers, baking coating, paints for heating oil tanks, penetrates of concrete, treatment of wood and metal surfaces. view less | |
| AVANSE™ MV-100 | Univar Solutions | AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field ...view more AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field applied finishes for metal, concrete and masonry substrates. It has the ability to be formulated into high performance coating at or below 100 g/L of volatile organic content (VOC). view less | |
| AFCONA - 5008 | AFCONA Additives Sdn Bhd | AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and organically treated bentonites while decreasing pigment sedimentation. AFCONA – 5008 is widely compatible in systems from no polarity to high polarity, finding application in primer...view more AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and organically treated bentonites while decreasing pigment sedimentation. AFCONA – 5008 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| AFCONA - 5054 | AFCONA Additives Sdn Bhd | AFCONA – 5054 is a high molecular weight carboxylic acid salts in an alkylbenzene solvent. This transparent yellow to brown liquid functions as a wetting and dispersing additive to prevent the sedimentation and flooding of pigments by preventing interfacial tension between the hydrophilic pigments, extenders, and the binder, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5054 is widely compatible and finds application in primer...view more AFCONA – 5054 is a high molecular weight carboxylic acid salts in an alkylbenzene solvent. This transparent yellow to brown liquid functions as a wetting and dispersing additive to prevent the sedimentation and flooding of pigments by preventing interfacial tension between the hydrophilic pigments, extenders, and the binder, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5054 is widely compatible and finds application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| Epotec® YD 128 ED | Aditya Birla | Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-deposition automotive primer...view more Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-deposition automotive primers and coatings, this product is also well-suited for use in various solvent-based & solvent-free coatings, can & coil coatings, and marine & industrial coatings. view less | |
| Epotec® YD 017S | Aditya Birla | Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primer...view more Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. view less | |
| Intelli-ion® | Hexigone Inhibitors Ltd | Intelli-ion® is an award-winning, patented technology that is designed to completely replace heavy metal and chromate inhibitors or co-blend with phosphate inhibitors. It provides the coatings market with cost-effect, high-performance, sustainable anti-corrosive additives. The smart technology fights corrosion when used in primer...view more Intelli-ion® is an award-winning, patented technology that is designed to completely replace heavy metal and chromate inhibitors or co-blend with phosphate inhibitors. It provides the coatings market with cost-effect, high-performance, sustainable anti-corrosive additives. The smart technology fights corrosion when used in primers with full system barrier topcoats and is compatible with a broad spectrum of resin types, coating types, and coatings manufacturing routes. view less | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primer...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| EBECRYL® 4175 | Allnex | EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and...view more EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and EB) coating for application by roller coating, spraying and curtain coating on wood, cork and furniture. EBECRYL® 4175 can be used to formulate clear high-gloss to matt UV- curing systems. view less | Request Sample |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primer...view more Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired. view less | Request Sample |
| BYK®-P 104 | BYK | BYK®-P 104 is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer. This product is suitable for medium to high polar systems and particularly effective in preventing flooding of titanium dioxide in combination with other color pigments. It is also used in amine-neutralized aqueous coatings; it is not compatible with mineral spirits. When used in anti-corrosion primer...view more BYK®-P 104 is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer. This product is suitable for medium to high polar systems and particularly effective in preventing flooding of titanium dioxide in combination with other color pigments. It is also used in amine-neutralized aqueous coatings; it is not compatible with mineral spirits. When used in anti-corrosion primers, in many cases the protective properties are enhanced. view less | |
| CYMEL® U-216-10LF | Allnex | CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primer...view more CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. This product may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems. view less | Request Sample |
| CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...view more CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. view less | |
| WorléeKyd S 6003 hv | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 hv is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd S ...view more WorléeKyd S 6003 hv is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd S 6003 hv is compatible with the majority of medium and long oil types air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeThix S 6357 (40% In White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Th...view more WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| RHOPLEX™ PR-33 | Univar Solutions | RHOPLEX™ PR-33 is an aqueous, all-acrylic binder designed for exterior and interior primers and stain blocking sealers, which uses ambient crosslinking technology to offer improved performance versus conventional latex polymers. It achieves excellent film...view more RHOPLEX™ PR-33 is an aqueous, all-acrylic binder designed for exterior and interior primers and stain blocking sealers, which uses ambient crosslinking technology to offer improved performance versus conventional latex polymers. It achieves excellent film formation blocking stains from migrating through the dry paint film and yields stain blocking performance at high PVC. Enhanced adhesion and excellent durability are additional attributes of this technology. view less | |
| Tiona® 596 Slurry | Cristal Global | Tiona® 596 Slurry, in the form of a white odorless liquid, is an aqueous dispersion of Tiona® 596, a multipurpose chloride-process rutile titanium dioxide pigment. It has high opacity, good multipurpose durability, good tint strength, high gloss, and extreme whiteness. Tiona® 596 Slurry has recommended applications in exterior and interior decorative and architectural coatings, water-based industrial coatings, and water-based undercoats and primer...view more Tiona® 596 Slurry, in the form of a white odorless liquid, is an aqueous dispersion of Tiona® 596, a multipurpose chloride-process rutile titanium dioxide pigment. It has high opacity, good multipurpose durability, good tint strength, high gloss, and extreme whiteness. Tiona® 596 Slurry has recommended applications in exterior and interior decorative and architectural coatings, water-based industrial coatings, and water-based undercoats and primers. view less | |
| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less | |
| SILLITIN Z 89 PURISS | Hoffmann Mineral | SILLITIN Z 89 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| Ascinin® P | OMG Borchers GmbH | Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting duri...view more Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting during over-coating. In baking paints, it eliminates surface defects. This product's active substance is not very volatile, so it counteracts wrinkling even in baking paints based, for examply, on ricin alkyds. view less | |
| Borchi® Gol PL | OMG Borchers GmbH | Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primer...view more Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primers and undercoats. This product is particularly effective in unsaturated, paraffin-free polyester resins, epoxy resins and combinations of epoxy resins with phenolic resins or amino resins. view less |
