| Nubicoat HTS Waterbased Concentrate at 52% with BASF Additives | Ferro Pigments | This formulation produces a pigment concentrate of high tinting strength Ultramarine Blue for waterbased paints. It is recommended for decorative and architectural, white correction, and DIY applications. | |
| Nubicoat HWR Waterbased Concentrate at 60% with BASF Additives | Ferro Pigments | This is a pigment concentrate of encapsulated Ultramarine Blue for waterbased paints. | |
| TINUVIN® 123 | BASF Dispersions & Resins | Tinuvin® 123 is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed automotive and industrial coatings, such as two-coat metallic thermosetting acrylate sy...weiterlesen Tinuvin® 123 is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed automotive and industrial coatings, such as two-coat metallic thermosetting acrylate systems or one-coat opaque thermosetting acrylate and polyester coatings. Its low basicity prevents possible interactions with acidic paint ingredients such as catalysts. Its efficiency provides significant improvement in coatings performance by minimizing paint defects such as cracking and gloss reduction for clear coats as well as chalking for pigmented paints. verkürzen | |
| TINUVIN® 292 | BASF Dispersions & Resins | Tinuvin® 292 is a liquid hindered amine light stabilizer especially developed for coatings. It is an almost pure mixture of the two active ingredients below. It is this combination that keeps the product liquid, unlike the pure diester which tends to soli...weiterlesen Tinuvin® 292 is a liquid hindered amine light stabilizer especially developed for coatings. It is an almost pure mixture of the two active ingredients below. It is this combination that keeps the product liquid, unlike the pure diester which tends to solidify, even at room temperature. The efficiency of Tinuvin® 292 provides significantly extended lifetime to coatings by minimizing paint defects such as cracking and loss of gloss. The dispersion of Tinuvin® 292 in waterborne coatings may be facilitated by dilution with a watermiscible solvent such as butylcarbitol. The performance of Tinuvin® 292 can be significantly improved when used in combination with a UV absorber such as recommended below. These synergistic combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination and color change. verkürzen | |
| TINUVIN® 460 | BASF Dispersions & Resins | Tinuvin® 460 is a UV light absorber of the hydroxyphenyl-triazine class. Due to its extremely high extinction, it provides outstanding protection to coatings and light sensitive substrates and materials. It is therefore especially suited for use in silve...weiterlesen Tinuvin® 460 is a UV light absorber of the hydroxyphenyl-triazine class. Due to its extremely high extinction, it provides outstanding protection to coatings and light sensitive substrates and materials. It is therefore especially suited for use in silver halide photographic papers or overprint varnishes. This product is a slightly yellow powder. verkürzen | |
| TINUVIN® 1130 | BASF Dispersions & Resins | Tinuvin® 1130 is a liquid UV absorber of the hydroxyphenyl benzotriazole class specifically developed for industrial coating applications. Its high temperature and extraction resistance makes it especially suitable for industrial and automotive coatings. ...weiterlesen Tinuvin® 1130 is a liquid UV absorber of the hydroxyphenyl benzotriazole class specifically developed for industrial coating applications. Its high temperature and extraction resistance makes it especially suitable for industrial and automotive coatings. Because of its broad UV absorption, it also provides efficient protection to light sensitive substrates such as wood and plastics. Tinuvin® 1130 can be used in waterborne and solvent borne coating applications. verkürzen | |
| TINUVIN® 384-2 | BASF Dispersions & Resins | Tinuvin® 384-2 is a liquid UV absorber of the hydroxyphenylbenzotriazole class developed for coatings. Its very high thermal stability and environmental permanence makes it suitable for coatings exposed to high bake cycles and/or extreme environmental con...weiterlesen Tinuvin® 384-2 is a liquid UV absorber of the hydroxyphenylbenzotriazole class developed for coatings. Its very high thermal stability and environmental permanence makes it suitable for coatings exposed to high bake cycles and/or extreme environmental conditions. It has been designed to fulfill the high performance and durability requirements of automotive and industrial high quality finishes. Its broad UV absorption allows efficient protection of light sensitive base coats or substrates such as wood and plastics. Since its absorption spectrum does not tail significantly into the visible region, it is an ideal UV absorber for those systems where initial yellowing must be kept to a minimum. verkürzen | |
| TINUVIN® 477 | BASF Dispersions & Resins | Tinuvin® 477 is a liquid, high performance UV absorber developed for solventborne and liquid UV curable coatings. Based on a red shifted Tris-Resorcinol-Triazine chromophore, it is suited for the protection of UVA range sensitive substrates or ingredients...weiterlesen Tinuvin® 477 is a liquid, high performance UV absorber developed for solventborne and liquid UV curable coatings. Based on a red shifted Tris-Resorcinol-Triazine chromophore, it is suited for the protection of UVA range sensitive substrates or ingredients. verkürzen | |
| TINUVIN® 479 | BASF Dispersions & Resins | Tinuvin® 479 is a hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs for automotive and industrial finishes. It has been developed as an interaction free UV absorber to be used in amine and / or metal ca...weiterlesen Tinuvin® 479 is a hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs for automotive and industrial finishes. It has been developed as an interaction free UV absorber to be used in amine and / or metal catalyzed coating systems or in coatings applied on base coats containing such catalysts. Its high extinction coefficient allows the formulation of coatings with reduced UV absorber levels and / or thin film applications. Combinations especially with other HPT UV absorbers and the newest generation photoinitiators makes it an excellent choice for UV curing coatings. Tinuvin® 479 is recommended for automotive OEM and refinish systems, UV cured coatings, and industrial finishes where long life performance is essential. Due to the high extinction coefficient and superior photostability applications specifically include thin film applications. Depending on the application, the spectral coverage can be further broadened through combinations with other UV absorbers of the hydroxyphenyl-triazine or hydroxyphenyl-benzotriazole class such as Tinuvin® 400 or Tinuvin® 928. verkürzen | |
| TINUVIN® 5050 | BASF Dispersions & Resins | Tinuvin® 5050 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne in...weiterlesen Tinuvin® 5050 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne industrial and decorative coatings. The broad UV absorbance of Tinuvin® 5050 makes it suitable for a wide range of coatings for wood, plastics and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. verkürzen | |
| TINUVIN® 5060 | BASF Dispersions & Resins | Tinuvin® 5060 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborn...weiterlesen Tinuvin® 5060 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne industrial and decorative coatings and is especially suited for oxidative drying and acid catalyzed systems. The broad UV absorbance of the used UVA of Tinuvin® 5060 makes it suitable for a wide range of coatings for wood, plastics, and metal. The non-basic character of the used NOR HALS prevents possible interactions with acidic paint ingredients such as catalysts, biocides, and pigments. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. verkürzen | |
| FOAMSTAR® ST 2434 | BASF Formulation Additives | FOAMSTAR® ST 2434 is effective in high gloss paints and coatings based on acrylic, styrene acrylic and vinyl acrylic latex. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), ...weiterlesen FOAMSTAR® ST 2434 is effective in high gloss paints and coatings based on acrylic, styrene acrylic and vinyl acrylic latex. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® ST 2434 defoams on a molecular level. It also has wetting properties not found in other conventional defoamers. FOAMSTAR® ST 2434 utilizes the FOAMSTAR® Molecule compounded with polysiloxanes in a mineral oil-free system. verkürzen | |
| LOXANOL® CA 5086 | BASF Formulation Additives | LOXANOL® CA 5086 is a clear liquid, nonvolatile, medium molecular weight coalescing solvent and plasticizer. This coalescent is compatible with acrylics, epoxies, alkyds, polyesters, and phenolic resins. Latex caulks incorporated with this product display...weiterlesen LOXANOL® CA 5086 is a clear liquid, nonvolatile, medium molecular weight coalescing solvent and plasticizer. This coalescent is compatible with acrylics, epoxies, alkyds, polyesters, and phenolic resins. Latex caulks incorporated with this product display excellent elongation and recovery properties. Most formulations can tolerate various loading levels and still provide flexibility without decreasing the caulks ability to adhere to various substrates. LOXANOL® CA 5086 increases flexibility and toughness, reduces brittleness, minimizes water sensitivity, and improves film formation. verkürzen | |
| TINUVIN® 928 | BASF Dispersions & Resins | Tinuvin® 928 is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. Its characteristic broadband absorption provides efficient protection to coatings and light sensitive substrates. Its excel...weiterlesen Tinuvin® 928 is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. Its characteristic broadband absorption provides efficient protection to coatings and light sensitive substrates. Its excellent solubility and high thermal and environmental permanence makes it particularly suitable for coatings exposed to high temperature curing processes, such as powder and coil coatings, or high environmental stress. It may be used in combination with a light stabilizer of the sterically hindered amine or aminoether class (HALS) such as recommended below. These combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination, and color change. The light stabilizers may be added in two-coat automotive finishes to the base and clear coat. verkürzen | |
| TINUVIN® 5333-DW (N) | BASF Dispersions & Resins | Tinuvin® 5333-DW (N) is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer (HALS) for coatings, adhesives, sealants, and printing inks. It was also designed to meet high performance and durability requirements of ...weiterlesen Tinuvin® 5333-DW (N) is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer (HALS) for coatings, adhesives, sealants, and printing inks. It was also designed to meet high performance and durability requirements of exterior water-based industrial and architectural coatings including energy curable systems (UV, electron beam). This product is a slightly yellow dispersion. verkürzen | |
| JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Ad...weiterlesen JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. verkürzen | |
| JONCRYL® 1685-A | BASF Dispersions & Resins | Joncryl® 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
| EFKA® PU 4015 | BASF Formulation Additives | EFKA® PU 4015 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments with strong viscosity depressing properties. This results in: improved gloss, reduced flooding problems, higher color st...weiterlesen EFKA® PU 4015 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments with strong viscosity depressing properties. This results in: improved gloss, reduced flooding problems, higher color strength, lower viscosity and higher pigment loads. Due to its particularly good combination of price and performance, EFKA® PU 4015 is a very attractive substitute for conventional wetting and dispersing agents. verkürzen | |
| EFKA® PU 4020 | BASF Formulation Additives | EFKA® PU 4020 is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in reduced grinding time, improved gloss, prevention of flooding and floating p...weiterlesen EFKA® PU 4020 is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in reduced grinding time, improved gloss, prevention of flooding and floating problems, and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4020 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4020 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. verkürzen | |
| TINUVIN® 5151 | BASF Dispersions & Resins | Tinuvin® 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solven...weiterlesen Tinuvin® 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solventborne industrial and decorative coatings. The broad UV absorbance of the used UVA of Tinuvin® 5151 makes it suitable for a wide range of coatings for wood, plastics, and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. verkürzen | |
| LAROMER® PO 8967 | BASF Dispersions & Resins | Laromer® PO 8967 is a polyether-modified acrylate oligomer. It is lower viscosity version of Laromer® PO 43 F, which shows a very balanced property profile and can be used as a sole binder in UV energy curable formulations for a variety of applications. ...weiterlesen Laromer® PO 8967 is a polyether-modified acrylate oligomer. It is lower viscosity version of Laromer® PO 43 F, which shows a very balanced property profile and can be used as a sole binder in UV energy curable formulations for a variety of applications. Laromer® PO 8967 is recommended for use in energy curable flexo, screen, and offset inks and overprint varnishes. Cured inks and overprint varnishes formulated with Laromer® PO 8967 exhibit resistance to chemicals and provide good surface hardness in combination with Lucirin® TPO, Lucirin TPO-L and Benzophenone. verkürzen | |
| LAROMER® PR 9013 | BASF Dispersions & Resins | Laromer® PR 9013 is an unsaturated modified dispersion oligomer used to formulate energy curable pigment concentrates and energy curable offset, flexographic, or silk-screen printing inks. Inks based on Laromer® PR 9013 are characterized by an excellent y...weiterlesen Laromer® PR 9013 is an unsaturated modified dispersion oligomer used to formulate energy curable pigment concentrates and energy curable offset, flexographic, or silk-screen printing inks. Inks based on Laromer® PR 9013 are characterized by an excellent yield value even at high pigmentation levels, high gloss, excellent run-ability, little moisture expansion; they cure to produce low odor films. Laromer® PR 9013 can also be used to formulate coatings for paper, plastic films, metals, wood, and wood products. In energy curable coatings for wood or wood products, it reduces absorption into the substrate. Films show little shrinkage and good wetting. verkürzen | |
| LAROMER® EA 8765 R | BASF Dispersions & Resins | Laromer® EA 8765 R is an aliphatic epoxy-modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications. | |
| JONCRYL® WAX 28 | BASF Dispersions & Resins | Joncryl® WAX 28 is a 35% solids polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings without significant loss of gloss often associated with polyethylene wax additions. | |
| ACRONAL® 3633 | BASF Dispersions & Resins | Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non...weiterlesen Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-APEO. verkürzen | |
| LAROMER® LR 8986 | BASF Dispersions & Resins | Laromer® LR 8986 is a modified aromatic epoxy acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications. | |
| TINUVIN® 400-DW (N) | BASF Dispersions & Resins | Tinuvin® 400-DW is an aqueous white to light beige liquid dispersion of a 2-hydroxy-phenyl-s-triazine (HPT) UV absorber (UVA). It is a versatile light stabilizer which can be used in a variety of waterborne coating systems. It has been designed to fulfill...weiterlesen Tinuvin® 400-DW is an aqueous white to light beige liquid dispersion of a 2-hydroxy-phenyl-s-triazine (HPT) UV absorber (UVA). It is a versatile light stabilizer which can be used in a variety of waterborne coating systems. It has been designed to fulfill the high cost/performance and durability requirements of interior and exterior industrial, decorative and automotive coatings. The high thermal stability and photo-permanence makes it suitable for coatings exposed to high bake temperatures and/or to extreme environmental conditions. verkürzen | |
| TINUVIN® 477-DW (N) | BASF Dispersions & Resins | Tinuvin® 477-DW (N) is an aqueous UV absorber dispersion developed for waterborne coatings. Based on a red shifted hydroxyphenyl-s-trizine chromophore, it is suited for coatings and substrates requiring strong UVA range wavelength protection. Its high he...weiterlesen Tinuvin® 477-DW (N) is an aqueous UV absorber dispersion developed for waterborne coatings. Based on a red shifted hydroxyphenyl-s-trizine chromophore, it is suited for coatings and substrates requiring strong UVA range wavelength protection. Its high heat stability and excellent photo-permanence provide superior UV stabilization and fulfill the requirements of high performance industrial, decorative, and wood coatings. verkürzen | |
| TINUVIN® 9945-DW (N) | BASF Dispersions & Resins | Tinuvin® 9945-DW (N) is a solvent-free, aqueous UV absorber dispersion for high performance industrial and decorative waterborne coating applications. | |
| ACRONAL® 3630 | BASF Dispersions & Resins | Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, t...weiterlesen Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, tack and cohesion, as well as excellent water resistance. Product has also been found to be suitable for numerous demanding roll label type applications. verkürzen | |
| JONCRYL® 662 | BASF Dispersions & Resins | Joncryl® 662 is an acrylic colloidal emulsion comprising 50% renewable raw materials on solids. It is suitable for pre- and post-print corrugated board and kraft paper applications. With the introduction of Joncryl 662, we offer our customers the chance t...weiterlesen Joncryl® 662 is an acrylic colloidal emulsion comprising 50% renewable raw materials on solids. It is suitable for pre- and post-print corrugated board and kraft paper applications. With the introduction of Joncryl 662, we offer our customers the chance to formulate a corrugated ink partly based on renewable raw materials with good press performance and excellent ink transfer, ensuring good color strength of the printed material. verkürzen | |
| ACRONAL® 4032 X | BASF Dispersions & Resins | Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels. | |
| ACRONAL® A 220 NA | BASF Dispersions & Resins | Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...weiterlesen Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. verkürzen | |
| ACRONAL® N 284 NA | BASF Dispersions & Resins | Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...weiterlesen Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. verkürzen | |
| ACRONAL® NX 2160 | BASF Dispersions & Resins | Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...weiterlesen Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. verkürzen | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| Lupasol® | BASF Formulation Technologies | Lupasol® Polyethylenimine (PEI) polymers have a branched cationic structure with high charge density that enables improved adhesion of dissimilar materials. Lupasol® can be used as a formulation additive or primer coat for: adhesion promotion, pigment sta...weiterlesen Lupasol® Polyethylenimine (PEI) polymers have a branched cationic structure with high charge density that enables improved adhesion of dissimilar materials. Lupasol® can be used as a formulation additive or primer coat for: adhesion promotion, pigment stabilization, and increased particle cohesion. Obtained from the polymerization of ethylenimine, this line of polymers is available in a wide range of molecular weights (from 800 -106 g/mol). Lupasol® products are water soluble and also exhibit good solubility in polar solvents with the added benefit of having a strong eco-toxicological profile including several food contact compliances. verkürzen | |
| JONCRYL® 659-A | BASF Dispersions & Resins | Joncryl® 659-A is an acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications. It provides good transfer and printability at low polymer solids. | |
| LAROMER® UA 9089 | BASF Dispersions & Resins | Laromer® UA 9089 is an aliphatic urethane di-acrylate resin. It may be used in energy-cure ink, overprint varnish, or laminating adhesive. When used in laminating adhesive, Laromer® UA 9089 provides good peel strength with polyester (PET) over biaxially o...weiterlesen Laromer® UA 9089 is an aliphatic urethane di-acrylate resin. It may be used in energy-cure ink, overprint varnish, or laminating adhesive. When used in laminating adhesive, Laromer® UA 9089 provides good peel strength with polyester (PET) over biaxially oriented polypropylene (BOPP) and with PET over low-density polyethylene (LDPE) substrates. Also, Laromer® UA 9089 provides good adhesion over plastic substrates. verkürzen | |
| ACRONAL® 4034 | BASF Dispersions & Resins | Acronal® 4034 is a non-APEO containing acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesives labels and tapes. | |
| ACRONAL® 4510 | BASF Dispersions & Resins | Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also di...weiterlesen Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also displays high water vapor permeability and low water absorption, which provides excellent long-term performance. The self-crosslinking mechanism of Acronal® 4510 imparts excellent dirt pick-up resistance and film strength while maintaining film elasticity at very low temperatures and varying film thicknesses. verkürzen | |
| Nubifer NB-5970 Waterbased Concentrate at 60% with BASF Additives | Ferro Pigments | This formulation is a pigment concentrate of micronized Black Iron Oxide for waterbased paints. | |
| Nubifer R-5530 Waterbased Concentrate at 67% with BASF Additives | Ferro Pigments | This is a pigment concentrate of micronized Red Iron Oxide for waterbased paints. | |
| Nubifer Y-5028 Waterbased Concentrate at 55% with BASF Additives | Ferro Pigments | This formulation produces a pigment concentrate of micronized Yellow Iron Oxide for waterbased paints. | |
| Water-Based Single Component High Gloss Acrylic for DTM and Topcoat Applications | BASF Dispersions & Resins | High performance coatings with low VOC content are needed to meet the market demand and government regulation. BASF has developed a low VOC, high performance, water-based coating system for direct to metal and topcoat applications. | |
| Water-based 2K High-gloss PUR for DTM and Topcoat Applications (With End-of-Pot-Life Indication) | BASF Dispersions & Resins | High-performance coatings with low VOC content are needed to meet the market demand and government regulations. BASF has developed a low VOC, high-performance, water-based 2K polyurethane coating system for direct-to-metal and topcoat applications. | |
| JONCRYL® 1982 | BASF Dispersions & Resins | Joncryl® 1982 is a one-pack, self-crosslinking acrylic emulsion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. This emulsion offers excellent clarity, low foaming, and excellent crack resis...weiterlesen Joncryl® 1982 is a one-pack, self-crosslinking acrylic emulsion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. This emulsion offers excellent clarity, low foaming, and excellent crack resistance. The chemical resistance of Joncryl® 1982 may allow its use in other applications, such as concrete coatings, specialty hardboard and plastics. This product is a translucent liquid. verkürzen | |
| JONCRYL® 1984 | BASF Dispersions & Resins | Joncryl® 1984 is a one-pack, self-crosslinking acrylic emulsion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. This emulsion offers excellent clarity, low foaming, and excellent crack resis...weiterlesen Joncryl® 1984 is a one-pack, self-crosslinking acrylic emulsion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. This emulsion offers excellent clarity, low foaming, and excellent crack resistance. The chemical resistance of Joncryl® 1984 may allow its use in other applications, such as concrete coatings, specialty hardboard and plastics. verkürzen | |
| JONCRYL® 1987 | BASF Dispersions & Resins | Joncryl® 1987 is a soft, flexible, one-pack, self-crosslinking acrylic emulsion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1987 offers excellent clarity, chemical and excellent ...weiterlesen Joncryl® 1987 is a soft, flexible, one-pack, self-crosslinking acrylic emulsion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1987 offers excellent clarity, chemical and excellent crack resistance. The resistance properties of Joncryl® 1987 may allow its use in other applications, such as concrete coatings, specialty hardboard, and plastics. This product is recommended for applications such as: interior/exterior wood coatings for millwork applications, interior/exterior concrete applications. verkürzen | |
| JONCRYL® 963 | BASF Dispersions & Resins | Joncryl® 963 is a very soft, flexibilizing, reactive modifier resin for use in high solids systems for low VOC coatings systems. It acts as a VOC reducer in coatings formulations that is a 98+% solids, pourable liquid at room temperature. Compared to Jon...weiterlesen Joncryl® 963 is a very soft, flexibilizing, reactive modifier resin for use in high solids systems for low VOC coatings systems. It acts as a VOC reducer in coatings formulations that is a 98+% solids, pourable liquid at room temperature. Compared to Joncryl® 960, Joncryl® 963 exhibits better acid-etch resistance and improved weathering properties. Joncryl® 963 is also styrene free. verkürzen | |
| BASONAT® HB 475 B/X | BASF Dispersions & Resins | Basonat® HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of nbutyl acetate and xylene. It is recommended for applications such as: i...weiterlesen Basonat® HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of nbutyl acetate and xylene. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. verkürzen | |
| JONCRYL® 558 | BASF Dispersions & Resins | Joncryl® 558 is a hydroxyl functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a typical “workhorse”, conventional solid acrylic resin. It differs from Joncryl® 587 in that it is slightly faster cur...weiterlesen Joncryl® 558 is a hydroxyl functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a typical “workhorse”, conventional solid acrylic resin. It differs from Joncryl® 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of Joncryl® 587. verkürzen | |
| BASONAT® HW 1180 PC | BASF Dispersions & Resins | Basonat® HW 1180 PC is a water-emulsificable, solvent-free, aliphatic polyisocyanate for crosslinking polymeric dispersions. It is an approximately 80% solids solution in propylene carbonate. Basonat® HW 1180 PC is used as a crosslinker for polymeric disp...weiterlesen Basonat® HW 1180 PC is a water-emulsificable, solvent-free, aliphatic polyisocyanate for crosslinking polymeric dispersions. It is an approximately 80% solids solution in propylene carbonate. Basonat® HW 1180 PC is used as a crosslinker for polymeric dispersions containing reactive OH groups. Basonat® HW 1180 PC is recommended for applications such as interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications and interior/exterior automotive OEM or refinish applications. verkürzen | |
| BASONAT® HB 100 | BASF Dispersions & Resins | Basonat® HB 100 is a solvent-free, aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exteri...weiterlesen Basonat® HB 100 is a solvent-free, aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. verkürzen | |
| BASONAT® HB 175 MP/X | BASF Dispersions & Resins | Basonat® HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. It is recommended for application...weiterlesen Basonat® HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. verkürzen | |
| JONCRYL® PRO 1537 | BASF Dispersions & Resins | Joncryl® PRO 1537 is an ultra-fine particle size acrylic emulsion polymer for general and specialty purpose industrial finishing and architectural paints. It provides a unique balance of expected acrylic benefits along with many “alkyd-like” features not ...weiterlesen Joncryl® PRO 1537 is an ultra-fine particle size acrylic emulsion polymer for general and specialty purpose industrial finishing and architectural paints. It provides a unique balance of expected acrylic benefits along with many “alkyd-like” features not found in other emulsion polymers. Joncryl® PRO 1537 is recommended for applications such as interior/exterior general metal industrial coating applications and interior/exterior architectural coatings. verkürzen | |
| JONCRYL® 2153 | BASF Dispersions & Resins | Joncryl® 2153 is a hard, RC styrene acrylic emulsion for use in economical industrial coatings for wood clears and hardboard primers. It offers superb application properties, low foam, good adhesion, high gloss potential, fast drying with excellent ea...weiterlesen Joncryl® 2153 is a hard, RC styrene acrylic emulsion for use in economical industrial coatings for wood clears and hardboard primers. It offers superb application properties, low foam, good adhesion, high gloss potential, fast drying with excellent early hardness development and inherent pigment dispersing ability without the use of conventional surfactants. Joncryl® 2153 is recommended for applications such as: interior waterborne wood coatings for furniture or millwork applications verkürzen | |
| JONCRYL® 538-A | BASF Dispersions & Resins | Joncryl® 538-A is an amine salt of modified acrylic copolymer. Its uses include polymers for inks, varnishes or coatings. This product is a straw yellow liquid with an ammonia-like odour. | |
| TINUVIN® 405 | BASF Dispersions & Resins | Tinuvin® 405 is a solid triazine-based UV absorber for coatings. It was designed to meet the high performance and durability requirements of acrylic powder coatings for transportation and industrial applications. For outdoor applications, Tinuvin® 405 nee...weiterlesen Tinuvin® 405 is a solid triazine-based UV absorber for coatings. It was designed to meet the high performance and durability requirements of acrylic powder coatings for transportation and industrial applications. For outdoor applications, Tinuvin® 405 needs to be combined with a hindered amine light stabilizer (HALS) such as Tinuvin® 144 or Tinuvin® 152. This product is a light yellow powder. verkürzen | |
| TINUVIN® 5248 | BASF Dispersions & Resins | Tinuvin® 5248 is a liquid light stabilizer blend containing a triazine-based UV absorber and a basic HALS for coatings, adhesives, and sealants. It was designed to meet high performance and durability requirements of exterior solvent-based automotive, ind...weiterlesen Tinuvin® 5248 is a liquid light stabilizer blend containing a triazine-based UV absorber and a basic HALS for coatings, adhesives, and sealants. It was designed to meet high performance and durability requirements of exterior solvent-based automotive, industrial, architectural, and decorative coatings including energy curable systems (UV, electron beam). It is especially suitable for clear coatings with a layer thickness from 40 – 80 µm and low pigmented coatings exposed to high baking temperatures and/or to extreme environmental conditions. verkürzen | |
| JONCRYL® WAX 120 | BASF Dispersions & Resins | Joncryl® Wax 120 is a paraffin/polyethylene wax emulsion for overprint varnish, industrial coating, and functional packaging coating applications. It is designed for water shedding, heat release, and low COF with FDA acceptability. It combines the film fo...weiterlesen Joncryl® Wax 120 is a paraffin/polyethylene wax emulsion for overprint varnish, industrial coating, and functional packaging coating applications. It is designed for water shedding, heat release, and low COF with FDA acceptability. It combines the film forming and water shedding characteristics of paraffin wax with the durability and broad compatibility of polyethylene wax. verkürzen | |
| JONCRYL® 1540 | BASF Dispersions & Resins | Joncryl® 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is su...weiterlesen Joncryl® 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is suitable for metal and hardboard applications. verkürzen | |
| JONCRYL® 1907 | BASF Dispersions & Resins | Joncryl® 1907 is a film forming emulsion used as a blend vehicle to impart flexibility, adhesion and reduced solvent demand. This product is used for wood finishes and hardboard primers. It is also suitable for interior gloss brushing enamels and as a mod...weiterlesen Joncryl® 1907 is a film forming emulsion used as a blend vehicle to impart flexibility, adhesion and reduced solvent demand. This product is used for wood finishes and hardboard primers. It is also suitable for interior gloss brushing enamels and as a modifier to improve chalk penetration. verkürzen | |
| JONCRYL® 1908 | BASF Dispersions & Resins | Joncryl® 1908 is a very hard polymer that imparts excellent block resistance properties. It is a styrenated acrylic emulsion designed as a blending system to give hardness and block resistance at low filming temperatures for maximum latitude in the formul...weiterlesen Joncryl® 1908 is a very hard polymer that imparts excellent block resistance properties. It is a styrenated acrylic emulsion designed as a blending system to give hardness and block resistance at low filming temperatures for maximum latitude in the formulation of clear and pigmented, fast dry coatings for wood surfaces. verkürzen | |
| JONCRYL® 1915 | BASF Dispersions & Resins | Joncryl® 1915 is a unique acrylic emulsion that exhibits low minimum film forming temperature, yet offers excellent block resistance. This product is ideally suited for high PVC primers used over hardboard and composite wood substrates. Joncryl® 1915 is r...weiterlesen Joncryl® 1915 is a unique acrylic emulsion that exhibits low minimum film forming temperature, yet offers excellent block resistance. This product is ideally suited for high PVC primers used over hardboard and composite wood substrates. Joncryl® 1915 is recommended for applications such as: interior/exterior primers on wood, hardboard, cement fiberboard, and composite wood applications verkürzen | |
| JONCRYL® 1916 | BASF Dispersions & Resins | Joncryl® 1916 is an acrylic emulsion for hardboard/door skin primer coatings. Although its block resistant properties are similar to Joncryl® 1915, it provides far better water resistance. This product is recommended for applications such as: interior/ext...weiterlesen Joncryl® 1916 is an acrylic emulsion for hardboard/door skin primer coatings. Although its block resistant properties are similar to Joncryl® 1915, it provides far better water resistance. This product is recommended for applications such as: interior/exterior primers on wood, hardboard, cement fiberboard, and composite wood applications. verkürzen | |
| JONCRYL® 1919 | BASF Dispersions & Resins | Joncryl® 1919 is a unique acrylic emulsion that exhibits low minimum film forming temperature, yet offers excellent block and water resistance. This product is ideally suited for high PVC primers used over hardboard and cement fiberboard substrates. It is...weiterlesen Joncryl® 1919 is a unique acrylic emulsion that exhibits low minimum film forming temperature, yet offers excellent block and water resistance. This product is ideally suited for high PVC primers used over hardboard and cement fiberboard substrates. It is a translucent emulsion. verkürzen | |
| JONCRYL® 1954 | BASF Dispersions & Resins | Joncryl® 1954 is an acrylic emulsion for use in high gloss, fast dry wood coatings. It is recommended in applications where fast dry, good block resistance, and high gloss are of importance. Joncryl® 1954 is recommended for applications such as interior w...weiterlesen Joncryl® 1954 is an acrylic emulsion for use in high gloss, fast dry wood coatings. It is recommended in applications where fast dry, good block resistance, and high gloss are of importance. Joncryl® 1954 is recommended for applications such as interior waterborne wood coatings for furniture or millwork applications verkürzen | |
| JONCRYL® 1980 | BASF Dispersions & Resins | Joncryl® 1980 is a one-pack, self-crosslinking acrylic emulsion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1980 offers excellent clarity, low foaming, and excellent crack resis...weiterlesen Joncryl® 1980 is a one-pack, self-crosslinking acrylic emulsion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1980 offers excellent clarity, low foaming, and excellent crack resistance. The chemical resistance of Joncryl® 1980 may allow its use in other applications, such as concrete coatings, specialty hardboard, and plastics. This product is a translucent emulsion. verkürzen | |
| JONCRYL® 2561 | BASF Dispersions & Resins | Joncryl® 2561 is an unique acrylic latex developed for interior and exterior high gloss architectural coatings. As an RC emulsion, it provides alkyd-like rheology, gloss, and pigment dispersing capabilities, while maintaining the excellent exterior durabi...weiterlesen Joncryl® 2561 is an unique acrylic latex developed for interior and exterior high gloss architectural coatings. As an RC emulsion, it provides alkyd-like rheology, gloss, and pigment dispersing capabilities, while maintaining the excellent exterior durability and resistance properties of acrylics. Joncryl® 2561 is recommended for interior/exterior waterborne wood coatings for furniture or millwork applications. verkürzen | |
| JONCRYL® WAX 26 | BASF Dispersions & Resins | Joncryl® Wax 26 is a 26% solid, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. The fine particle size of this product makes it ideal for high gloss overpr...weiterlesen Joncryl® Wax 26 is a 26% solid, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. The fine particle size of this product makes it ideal for high gloss overprint varnish and gravure applications. verkürzen | |
| JONCRYL® WAX 4 | BASF Dispersions & Resins | Joncryl® Wax 4 is a highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water-based ink formulations. Its unique composition results in very high rub and scuff resistance at low use ...weiterlesen Joncryl® Wax 4 is a highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water-based ink formulations. Its unique composition results in very high rub and scuff resistance at low use levels. For this reason, this product is extremely effective. Joncryl® Wax 4 is recommended for printing inks for flexographic or gravure applications, and interior/exterior wood coatings for flooring, furniture, or millwork applications. verkürzen | |
| JONCRYL® 507 | BASF Dispersions & Resins | Joncryl® 507 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with Joncryl® 507 feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. It is recommended for uretha...weiterlesen Joncryl® 507 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with Joncryl® 507 feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. It is recommended for urethane coating applications in the industrial coatings market. Joncryl® 507 is an alternate solvent version of Joncryl® 500 for low odor and nonHAPS applications. verkürzen | |
| JONCRYL® 508 | BASF Dispersions & Resins | Joncryl® 508 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with this clear liquid feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. Joncryl® 508 is an alte...weiterlesen Joncryl® 508 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with this clear liquid feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. Joncryl® 508 is an alternate solvent version of Joncryl® 500 for low VOC applications. verkürzen | |
| JONCRYL® 537 | BASF Dispersions & Resins | Joncryl® 537 is an acrylic emulsion for industrial coating applications. This translucent emulsion provides the fast dry characteristics of an emulsion, while providing the clarity and sandability necessary for applications such as interior wood sealers. | |
| JONCRYL® 551 | BASF Dispersions & Resins | Joncryl® 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially ...weiterlesen Joncryl® 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin. Joncryl® 551 differs from Joncryl® 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of Joncryl® 587. verkürzen | |
| JONCRYL® 67 | BASF Dispersions & Resins | Joncryl® 67 is a high molecular weight styrenated acrylic resin designed to produce high quality aqueous pigment dispersions. In addition, it can also be used to manufacture water-soluble pigmented chips where maximum color development and transparency a...weiterlesen Joncryl® 67 is a high molecular weight styrenated acrylic resin designed to produce high quality aqueous pigment dispersions. In addition, it can also be used to manufacture water-soluble pigmented chips where maximum color development and transparency are essential. verkürzen | |
| JONCRYL® 690 | BASF Dispersions & Resins | Joncryl® 690 is a high molecular weight, high acid value acrylic resin specifically designed to optimize the gloss and transparency of organic pigment dispersions. Dispersions formulated with Joncryl® 690 approach the quality of chip dispersions. Its colo...weiterlesen Joncryl® 690 is a high molecular weight, high acid value acrylic resin specifically designed to optimize the gloss and transparency of organic pigment dispersions. Dispersions formulated with Joncryl® 690 approach the quality of chip dispersions. Its color development capability often allows equal color strength at reduced pigment levels. verkürzen | |
| JONCRYL® 8383-A | BASF Dispersions & Resins | Joncryl® 8383-A has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. This emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a so...weiterlesen Joncryl® 8383-A has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. This emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a solvent-based system.) Joncryl® 8383-A shows excellent water resistance, good hardness, block resistance, and excellent wet adhesion/elasticity (for outdoor purposes). It allows the formulation of a coating with a unique balance of chemical resistance, mechanical properties, and appearance. For outdoor purposes, Joncryl® 8383-A shows very good wet adhesion. The crosslinking chemistry of Joncryl® 8383-A allows drying at room and elevated temperatures. The good clarity, hardness development, and block resistance in combination with water resistance makes this product suitable for replacing some solvent-based coatings. verkürzen | |
| JONCRYL® 901 | BASF Dispersions & Resins | Joncryl® 901 is an innovative acrylic oligomer for high solids polyurethane coatings. High solids coatings containing as low as 2.8 pounds per gallon of VOC (Volatile Organic Compounds) can be formulated to spray by conventional or airless equipment. Jon...weiterlesen Joncryl® 901 is an innovative acrylic oligomer for high solids polyurethane coatings. High solids coatings containing as low as 2.8 pounds per gallon of VOC (Volatile Organic Compounds) can be formulated to spray by conventional or airless equipment. Joncryl® 901 displays excellent viscosity characteristics without the addition of low molecular weight reactive diluents. Paints formulated with should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. verkürzen | |
| JONCRYL® 906-AC | BASF Dispersions & Resins | Joncryl® 906-AC is an exempt solvent version of Joncryl 906 that is recommended for high solids urethane coatings. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventio...weiterlesen Joncryl® 906-AC is an exempt solvent version of Joncryl 906 that is recommended for high solids urethane coatings. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. This product is a clear liquid that exhibits excellent gloss retention and fast dry time. verkürzen | |
| JONCRYL® 909 | BASF Dispersions & Resins | Joncryl® 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethan...weiterlesen Joncryl® 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times, hardness development, and practical pot life. High solids coatings for maintenance, transportation, automotive refinish, and other applications can be formulated from 2.8 to 3.5 pounds per gallon of VOC. Joncryl® 909 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product should be considered as a candidate for high performance, maintenance, automotive refinish, and transportation coatings as a replacement for conventional solids urethane finishes. verkürzen | |
| JONCRYL® 910 | BASF Dispersions & Resins | Joncryl® 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate f...weiterlesen Joncryl® 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying polyurethane coatings with good pot life and excellent dry time characteristics for maintenance, transportation, and other applications, at VOC levels as low as 3.2 pounds per gallon without exempt solvents. verkürzen | |
| JONCRYL® 915 | BASF Dispersions & Resins | Joncryl® 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of Joncryl® 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink dens...weiterlesen Joncryl® 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of Joncryl® 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink density. High solids coatings that are as low as 2.8 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. Joncryl® 915 displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids polyurethane finishes. verkürzen | |
| JONCRYL® 920 | BASF Dispersions & Resins | Joncryl® 920 is an innovative acrylic oligomer for high solids polyurethane coatings, which features fast cure with a practical pot life. High solids coatings that are as low as 2.3 pounds per gallon of VOC can be formulated to spray by conventional or ai...weiterlesen Joncryl® 920 is an innovative acrylic oligomer for high solids polyurethane coatings, which features fast cure with a practical pot life. High solids coatings that are as low as 2.3 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. It displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. Joncryl® 920 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. verkürzen | |
| JONCRYL® 922 | BASF Dispersions & Resins | Joncryl® 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coa...weiterlesen Joncryl® 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times and a practical pot life. High solids coatings for maintenance, transportation, and other applications can be formulated from 2.3 to 3.8 pounds per gallon of VOC. Joncryl® 922 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product is also available in MAK as Joncryl® 920. It should be considered as a candidate for high performance, maintenance, and transportation coatings as a replacement for conventional solids urethane finishes. verkürzen | |
| JONCRYL® 924 | BASF Dispersions & Resins | Joncryl® 924 is an innovative acrylic oligomer for high solids urethane coatings, which features fast cure with a practical pot life. It is supplied in the exempt solvent PCBTF for very low to zero VOC applications, although most formulations will contain...weiterlesen Joncryl® 924 is an innovative acrylic oligomer for high solids urethane coatings, which features fast cure with a practical pot life. It is supplied in the exempt solvent PCBTF for very low to zero VOC applications, although most formulations will contain 1.0 – 2.5 lbs/gal of VOC content. It possesses outstanding exterior durability and outstanding gloss, flow, leveling, and application properties. verkürzen | |
| JONCRYL® 934 | BASF Dispersions & Resins | Joncryl® 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. Jo...weiterlesen Joncryl® 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. Joncryl® 934 displays good cure rate and pot life. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. verkürzen | |
| JONCRYL® 935 | BASF Dispersions & Resins | Joncryl® 935 is a high performance polyol for polyurethane coatings suitable for automotive refinish and industrial applications. It offers excellent exterior durability with good chemical resistance and is available in PCBTF as Joncryl® 939. | |
| JONCRYL® 945 | BASF Dispersions & Resins | Joncryl® 945 is a fast curing acrylic polyol designed for high solids polyurethane coatings. It displays excellent gloss and gloss retention as well as good chemical resistance. Joncryl® 945 should be considered as a candidate for high performance mainten...weiterlesen Joncryl® 945 is a fast curing acrylic polyol designed for high solids polyurethane coatings. It displays excellent gloss and gloss retention as well as good chemical resistance. Joncryl® 945 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. verkürzen | |
| JONCRYL® 95 | BASF Dispersions & Resins | Joncryl® 95 is an ultra-fine particle size, acrylic emulsion designed for use in wood stain applications. It provides solution-like appearance and penetration properties along with reduced grain raising. Joncryl® 95 is recommended for interior waterborne ...weiterlesen Joncryl® 95 is an ultra-fine particle size, acrylic emulsion designed for use in wood stain applications. It provides solution-like appearance and penetration properties along with reduced grain raising. Joncryl® 95 is recommended for interior waterborne wood coatings for furniture or millwork applications verkürzen | |
| JONCRYL® 2570 | BASF Dispersions & Resins | Joncryl® 2570 is an acrylic emulsion for industrial coating applications. It provides high gloss, good adhesion, water resistance, block resistant, and very low VOC. This translucent emulsion is recommended for interior/exterior wood coatings for millwork...weiterlesen Joncryl® 2570 is an acrylic emulsion for industrial coating applications. It provides high gloss, good adhesion, water resistance, block resistant, and very low VOC. This translucent emulsion is recommended for interior/exterior wood coatings for millwork applications and interior/exterior general metal coating applications. verkürzen | |
| JONCRYL® 1921 | BASF Dispersions & Resins | Joncryl® 1921 is an acrylic emulsion offering a balance between block resistance and adhesion properties for hardboard primer coatings. Joncryl® 1921 is a unique acrylic emulsion that exhibits low minimum film forming temperature, yet offers excellent blo...weiterlesen Joncryl® 1921 is an acrylic emulsion offering a balance between block resistance and adhesion properties for hardboard primer coatings. Joncryl® 1921 is a unique acrylic emulsion that exhibits low minimum film forming temperature, yet offers excellent block and water resistance. it is ideally suited for high PVC primers used over hardboard and cement fiberboard substrates. It is recommended for interior/exterior primers on wood, hardboard, cement fiberboard, and composite wood. verkürzen | |
| TINUVIN® 99-2 | BASF Dispersions & Resins | Tinuvin® 99-2 is a liquid UV absorber of the hydroxyphenyl-benzotriazole class designed to fulfill the high cost/performance and durability requirements of trade sales and industrial coatings. Its broad UV absorption allows efficient protection of light ...weiterlesen Tinuvin® 99-2 is a liquid UV absorber of the hydroxyphenyl-benzotriazole class designed to fulfill the high cost/performance and durability requirements of trade sales and industrial coatings. Its broad UV absorption allows efficient protection of light sensitive substrates such as wood and plastics. verkürzen | |
| TINUVIN® 900 | BASF Dispersions & Resins | Tinuvin® 900 is a UV absorber of the hydroxyphenyl-benzotriazole class developed specifically for coating systems exposed to high temperatures and/or extreme environmental stresses. It may be used in combination with a light stabilizer of the sterically h...weiterlesen Tinuvin® 900 is a UV absorber of the hydroxyphenyl-benzotriazole class developed specifically for coating systems exposed to high temperatures and/or extreme environmental stresses. It may be used in combination with a light stabilizer of the sterically hindered amine or aminoether class (HALS) such as recommended below. These combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination, and color change. The light stabilizers may be added in two-coat automotive finishes to the base and clear coat. verkürzen | |
| TINUVIN® 5100 | BASF Dispersions & Resins | Tinuvin® 5100 is a liquid, non-basic aminoether (NOR) hindered amine light stabilizer (HALS) developed especially to give high durability to exterior industrial and decorative coatings. It is specifically designed and manufactured for coatings where a low...weiterlesen Tinuvin® 5100 is a liquid, non-basic aminoether (NOR) hindered amine light stabilizer (HALS) developed especially to give high durability to exterior industrial and decorative coatings. It is specifically designed and manufactured for coatings where a low basicity, non-interacting and high value stabilizer is required. Based on amino-ether functionality, its low basicity reduces possible interactions with acidic paint components such as curing catalysts. Its high efficiency provides significant improvement of coating performance by minimizing paint degradation that causes cracking and gloss reduction of clear coats as well as chalking and fading of pigmented paints. verkürzen | |
| TINUVIN® CARBOPROTECT® | BASF Dispersions & Resins | Tinuvin® CarboProtect® is a solid, very red-shifted benzotriazole-based UV absorber designed for solvent-based clear or semi-transparent coatings over carbon fiber-reinforced plastics (CFRP) or glass fiber-reinforced plastics (GFRP) where fibers are embed...weiterlesen Tinuvin® CarboProtect® is a solid, very red-shifted benzotriazole-based UV absorber designed for solvent-based clear or semi-transparent coatings over carbon fiber-reinforced plastics (CFRP) or glass fiber-reinforced plastics (GFRP) where fibers are embedded in an epoxy matrix. verkürzen | |
| TINUVIN® 292 HP | BASF Dispersions & Resins | Tinuvin® 292 HP is a liquid hindered amine light stabilizer especially developed for color sensitive coating applications. Tinuvin® 292 HP is a very pure mixture of two active ingredients that help maintain this products’ liquid state. It provides signifi...weiterlesen Tinuvin® 292 HP is a liquid hindered amine light stabilizer especially developed for color sensitive coating applications. Tinuvin® 292 HP is a very pure mixture of two active ingredients that help maintain this products’ liquid state. It provides significantly extended lifetime to coatings by minimizing paint defects such as cracking and loss of gloss without adding additional color to the formulation. verkürzen | |
| BASONAT® HW 2000 | BASF Dispersions & Resins | Basonat® HW 2000 is a solvent-free, water-emulsifiable, polyfunctional isocyanate used as a hardener for polymeric dispersions containing reactive OH groups. It has excellent weather and chemical resistance, is non-yellowing and offers excellent hardness/...weiterlesen Basonat® HW 2000 is a solvent-free, water-emulsifiable, polyfunctional isocyanate used as a hardener for polymeric dispersions containing reactive OH groups. It has excellent weather and chemical resistance, is non-yellowing and offers excellent hardness/flexibility for demanding applications. verkürzen | |
| HYDROPALAT® SL 3682 | BASF Formulation Additives | HYDROPALAT® SL 3682 is a highly effective slip and anti-blocking additive. It is suitable for aqueous paint, coating and ink formulations to provide slip, mar resistance and anti-blocking properties. It is suitable for all kinds of paints and also clear c...weiterlesen HYDROPALAT® SL 3682 is a highly effective slip and anti-blocking additive. It is suitable for aqueous paint, coating and ink formulations to provide slip, mar resistance and anti-blocking properties. It is suitable for all kinds of paints and also clear coating formulations (e.g. wood coatings). verkürzen |
