| TEGO® AddBond LP 1611 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It...展開 TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It is recommended for can and coil coatings, industrial coatings, and 2-pack coatings. 收起 | Request Sample |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...展開 Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. 收起 | |
| EBECRYL® 171 | Allnex | EBECRYL® 171 is a methacrylate modified acidic adhesion promoting agent designed as a modifier for ultraviolet (UV) and electron beam (EB) curable coatings. It is characterized by low viscosity, acid functionality, and adhesion on various substrates. | Request Sample |
| TEGO® AddBond LP 1600 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatin...展開 TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatings. 收起 | Request Sample |
| Titanium Diisopropoxide Bis(acetylacetonate) HW-801 | Zhejiang Feidian Chemical Co., Ltd. | HW-801 is an adhesion promoter and cross-linker that is an essential additive for inks and coatings, especially flexographic and gravure printing inks. It helps to improve the final product properties. This is achieved by the titanate acting as a cross-li...展開 HW-801 is an adhesion promoter and cross-linker that is an essential additive for inks and coatings, especially flexographic and gravure printing inks. It helps to improve the final product properties. This is achieved by the titanate acting as a cross-linker for the binder and as an adhesion promoter between the ink and substrate, which provides improved adhesion, enhanced curing, and improved chemical, solvent, and water resistance. 收起 | |
| Silane Coupling Agent FD-6150 | Zhejiang Feidian Chemical Co., Ltd. | FD-6150 is a modified amino-alkyl multiple functional oligomeric silane. It functions efficiently as an adhesion promoter. Characteristics of FD-6150 include improved adhesion with the unprimed substrate, faster curing speed, reduce yellowing, better hydr...展開 FD-6150 is a modified amino-alkyl multiple functional oligomeric silane. It functions efficiently as an adhesion promoter. Characteristics of FD-6150 include improved adhesion with the unprimed substrate, faster curing speed, reduce yellowing, better hydrophobic properties, greater flexibility, and low VOC. 收起 | |
| TEGO® AddBond DS 1300 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond DS 1300 improves adhesion of waterborne coatingson steel, galvanized steel, aluminum, and plastics. | Request Sample |
| Lucidene 351 | Hydrite Chemical Co. | Lucidene 351 is a lamination ink vehicle with good adhesion and high bond strengths. | |
| EBECRYL® 741 | Allnex | EBECRYL® 741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. | Request Sample |
| TEGO® AddBond LTW | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| Polimer 6000 | Polidur San Luis | Polimer 6000 is an acrylic acrylated at 40% in Policure 5013. This product presents good curing speed, medium film hardness, medium gloss and excellent adhesion in plastics. It is for use in plastics lacquers and varnishes, inks and varnishes with excelle...展開 Polimer 6000 is an acrylic acrylated at 40% in Policure 5013. This product presents good curing speed, medium film hardness, medium gloss and excellent adhesion in plastics. It is for use in plastics lacquers and varnishes, inks and varnishes with excellent adhesion in different substrates and Varnishes and lacquers for wood. 收起 | |
| Polimer 4007 | Polidur San Luis | Polimer 4007 is 100% acrylated amine with excellent curing speed and medium gloss. It Increases ink´s curing speed and Increases adhesion in plastics and glass. Polimer 4007 is for use in plastics lacquers and varnishes, inks and varnishes with excellent ...展開 Polimer 4007 is 100% acrylated amine with excellent curing speed and medium gloss. It Increases ink´s curing speed and Increases adhesion in plastics and glass. Polimer 4007 is for use in plastics lacquers and varnishes, inks and varnishes with excellent adhesion in different substrates and varnishes and lacquers for wood. 收起 | |
| TEGO® AddBond LTW-B | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW-B improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| Titanate Coupling Agent FD‐TnPT | Zhejiang Feidian Chemical Co., Ltd. | FD‐TnPT is a tetrabutyl titanate coupling agent. It is mainly used to improve performance of polyester lacquer, and to prepare high temperature paint. In cross-linking reactions, it can improve adhesion between adhesive and polymer and enhance adhesion of...展開 FD‐TnPT is a tetrabutyl titanate coupling agent. It is mainly used to improve performance of polyester lacquer, and to prepare high temperature paint. In cross-linking reactions, it can improve adhesion between adhesive and polymer and enhance adhesion of ink to substrate. It is also used as a catalyst in rubber synthesis. 收起 | |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...展開 Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. 收起 | |
| EBECRYL® 740/40 TP | Allnex | EBECRYL® 740/40 TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates. It is recommended for use in: silk screen inks and coatings on plastics, adhesiv...展開 EBECRYL® 740/40 TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates. It is recommended for use in: silk screen inks and coatings on plastics, adhesives and inks for difficult substrates, such as untreated polyester, polypropylene, polystyrene, and adhesion promoting adhesives. 收起 | Request Sample |
| EBECRYL® 367 | Allnex | EBECRYL® 367 is a polyester acrylate, developed to improve the adhesion of inks and varnishes onto plastics. | Request Sample |
| Titanate Coupling Agent FD-TnBT | Zhejiang Feidian Chemical Co., Ltd. | FD-TnBT is a colorless to light yellow liquid. It is mainly used to improve performance of polyester lacquer, and prepare high temperature paint. In cross linking reactions, it can improve adhesion between adhesive and polymer, as well as enhance adhesio...展開 FD-TnBT is a colorless to light yellow liquid. It is mainly used to improve performance of polyester lacquer, and prepare high temperature paint. In cross linking reactions, it can improve adhesion between adhesive and polymer, as well as enhance adhesion of ink to substrate. It is also used as catalyst in rubber synthesis. 收起 | |
| SETAL® 173 VS-60 | Allnex | SETAL® 173 VS-60 is a saturated polyester resin with high hardness, very good adhesion, Good compatibility with CAB. | Request Sample |
| TEGO® AddBond 2220 ND | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond 2220 improves flexibility and adhesion of solventborne coatings. This soft polyester shows very good compatibility in non-polar formulations. | Request Sample |
| CYREZ® 400 | Allnex | CYREZ® 400 is a HMMM-based resin using precipitated silica as a carrier. This resin is 72% active ingredient HMMM and functions as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinfo...展開 CYREZ® 400 is a HMMM-based resin using precipitated silica as a carrier. This resin is 72% active ingredient HMMM and functions as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinforcement materials. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. 收起 | Request Sample |
| ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| SETAQUA® B E 270 | Allnex | SETAQUA® B E 270 is a water thinnable, oil-free, polyester resin. Good hardness, flexibility and adhesion. High stone chip resistance. | Request Sample |
| SETALUX® 27-1316 | Allnex | SETALUX® 27-1316, when combined with aliphatic poly-isocyanates provides ease of coating application, good adhesion, flexibility and excellent water resistance. | Request Sample |
| CYMEL® U-1054 | Allnex | CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance propertie...展開 CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, this product provides an excellent balance between adhesion and film flexibility, especially after several cure cycles. 收起 | Request Sample |
| TEGO® AddBond HS | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond HS MPA | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| RESYDROL® VAX 5538w/50WA | Allnex | Resydrol® VAX 5538W/50WA is recommended as a modifier resin for waterborne primer-surfacers to improve adhesion (e.g. to PVC) and corrosion resistance. | Request Sample |
| Silane Coupling Agent KH-560 | Zhejiang Feidian Chemical Co., Ltd. | KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion...展開 KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. 收起 | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...展開 Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. 收起 | |
| EBECRYL® 3416 | Allnex | EBECRYL® 3416 is an UV curable highly reactive epoxy acrylate, which may be cross-linked with suitable reactive diluters to especially durable, hard elastic and chemically resistant paint films of high quality. In conjunction with EBECRYL® 8306 and EBECRYL® 171 it is used for metal coatings with excellent adhesion and corrosion resistance. It is used for metal coatings with excellent adhesion...展開 EBECRYL® 3416 is an UV curable highly reactive epoxy acrylate, which may be cross-linked with suitable reactive diluters to especially durable, hard elastic and chemically resistant paint films of high quality. In conjunction with EBECRYL® 8306 and EBECRYL® 171 it is used for metal coatings with excellent adhesion and corrosion resistance. It is used for metal coatings with excellent adhesion and corrosion resistance. 收起 | Request Sample |
| HydriPrint 4045 | Hydrite Chemical Co. | HydriPrint 4045 is a soft film forming polymer with good adhesion and resolubility properties. This product is well suited for use in ink applications. | |
| VISIOMER® MEEU 25 M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 25 M is an ureido methacrylate 25% in MMA. Used to impart wet adhesion and wet scrub resistance to solvent based polymers. | |
| Crestacryl® 71-1030 | Scott Bader | Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and flexibilty. Used for high grade façade, wall and concrete paints and sealers. | |
| EBECRYL® 525 | Allnex | Ebecryl® 525 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate. Films of Ebecryl® 525 cured by UV or EB are soft and flexible, with good adhesion to paper, plastics and metals, making this product especially suited for use in...展開 Ebecryl® 525 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate. Films of Ebecryl® 525 cured by UV or EB are soft and flexible, with good adhesion to paper, plastics and metals, making this product especially suited for use in laminating adhesives. It is recommended for use in: screen ink vehicles with good intercoat adhesion, adherable primer coating on metals, and laminating adhesives, particularly between paper/aluminium, paper/LDPE, paper/polypropylene, aluminium/LDPE. 收起 | Request Sample |
| SETAL® 229 XX-60 | Allnex | SETAL® 229 XX-60 is a short-oil alkyd resin based on tall oil fatty acids with good adhesion, fast curing and good pigment wetting properties. | Request Sample |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...展開 Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. 收起 | |
| Crestacryl® 71-5060 | Scott Bader | Crestacryl® 71-5060 is a thermoplastic acrylic with excellent solvent release, elasticity and adhesion onto various metallic substrates. Also used for primers for metal and wood finishing. | |
| RESYDROL® AZ 541w/42WA | Allnex | Resydrol® AZ 541W/42WA is a water dilutable, self cross-linking alkyd resin containing urethane groups. It is very flexible, has excellent adhesion, and very good stability. | Request Sample |
| ADDID® 900 | Evonik Operations GmbH, BL Coating Additives | 二氨基官能三甲氧基硅烷增粘劑。 | Request Sample |
| Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
| ROSKYDAL® K 58 | Allnex | ROSKYDAL® K 58 can be used as a binder in the formulation of highly filled UP knifing fillers with good sandability and good adhesion on all automotive substrates. | Request Sample |
| PHENODUR® EP 560 | Allnex | PHENODUR® EP 560 is used as a crosslinker for epoxy, hydroxyl, carboxyl and amide functional vehicles to produce baked films with excellent chemical resistance, corrosion protection and adhesion. | Request Sample |
| MACRYNAL® SM 500/60X | Allnex | MACRYNAL® SM 500/60X is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates with high gloss, good mechanical properties and good adhesion to metals and plastic substrates. | Request Sample |
| SETALUX® 27-1328 | Allnex | SETALUX® 27-1328 is a high solids acrylic polyol that provides, when combined with aliphatic poly-isocyanates, ease of coating application, good adhesion, flexibility and excellent water resistance. | Request Sample |
| EBECRYL® 524 | Allnex | EBECRYL® 524 is an acid-modified polyester diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA)(1). It is used as the primary or modifying oligomer in UV or EB curable formulations to increase adhesion to a variety of substrat...展開 EBECRYL® 524 is an acid-modified polyester diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA)(1). It is used as the primary or modifying oligomer in UV or EB curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is recommended for: laminating adhesives, particularly between paper/aluminum, paper/LDPE, paper/polypropylene and aluminum/LDPE, primer coatings on metal, metallization receptive coatings on plastics, and improving intercoat adhesion. 收起 | Request Sample |
| TEGO® AddBond LTH | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTH improves adhesion of coatings on metal and plastic substrates. It does not soften the coating film and can be used for solventborne, solvent-free, and radiation-curing coating systems | Request Sample |
| Lucidene 605 NV | Hydrite Chemical Co. | Lucidene 605 NV is an emulsion that displays outstanding adhesion, water resistance, and low VOC content. This product is well suited for use in water-based inks and coatings. | |
| Resipint 32 | Simon Quimica | Resipint 32 is a coating for concrete where high abrasion resistance, gloss and adhesion is required. It's viscosity is 100-500 cps a 25C, and % solids is 62+/-2. | |
| SETYRENE™ 13-1807 | Allnex | SETYRENE® 13-1807 resin solution is a copolymer of styrene and a soya / dehydrated castor oil alkyd designed for fast air-dry with good adhesion, flexibility and durability properties. | Request Sample |
| UCECRYL® B 3022 | Allnex | UCECRYL® B 3022 is amedium MFFT straight acrylic emulsion copolymer. It exhibits good adhesion on various substrate, as well as good resistance to water whitening and good weathering resistance. | Request Sample |
| TEGO® VariPlus CA N | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus CA N shows excellent viscosity reduction and helps accelerate the drying speed. It provides very good adhesion on metal combined with high gloss and good weather resistance. | Request Sample |
| SETAL® 90173 SS-50 | Allnex | SETAL® 90173 SS-50 is a saturated polyester resin, modified with sag control agent (SCA). Good compatibility with CAB, excellent rheology control, good metallic effect, good adhesion and flexibility. | Request Sample |
| Crestacryl® 71-9076 | Scott Bader | Crestacryl® 71-9076 has very rapid solvent release and drive-over ability; resin has excellent hardness, very good elasticity and adhesion. It is a high grade road-marking paint. | |
| Cyclic Trimethylopropane Formal Acrylate (CTFA) | Jiangsu Sanmu Group Corporation | CTFA is a mono-functional UV monomer. It offers high reactivity, flexibility, low shrinkage, and good adhesion. This monomer is widely used in UV or EB cured coatings, adhesives and inks. | |
| VISIOMER® MEEU 50 W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 50 W is an ureido methacrylate 50% in water. It is designed to improve wet adhesion properties of emulsion polymers and wet scrub resistance of the final products. | |
| SETALUX® 17-1265 | Allnex | SETALUX® 17-1265 is a fast drying thermoplastic acrylic resin solution supplied in toluene. This resin exhibits exceptional adhesion, drying, and sanding properties and is designed in automotive refinish primers. | Request Sample |
| EBECRYL® 3500 | Allnex | EBECRYL® 3500 is a modified epoxy diacrylate that exhibits relatively low viscosity, outstanding performance in many wood coating applications, and adhesion to many plastics. Films of EBECRYL® 3500 cured by ultraviolet light (UV) or electron beam (EB) dem...展開 EBECRYL® 3500 is a modified epoxy diacrylate that exhibits relatively low viscosity, outstanding performance in many wood coating applications, and adhesion to many plastics. Films of EBECRYL® 3500 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good flexibility, high gloss, toughness, adhesion and superior chemical resistance. EBECRYL® 3500 is recommended for use in: wood topcoats and sealers, clear coatings for paper, and flexible and rigid plastics, metal decorating varnishes, adhesives for paper or film lamination, lithographic and screen ink vehicles. 收起 | Request Sample |
| Reactol™ 1717 A | Lawter | Reactol™ 1717 A is a pale-colored polyketone resin that is soluble in alcohol and which exhibits a high degree of polarity and a broad range of compatibility. This chemistry helps to improve pigment wetting, gloss and adhesion. Coatings and inks that use ...展開 Reactol™ 1717 A is a pale-colored polyketone resin that is soluble in alcohol and which exhibits a high degree of polarity and a broad range of compatibility. This chemistry helps to improve pigment wetting, gloss and adhesion. Coatings and inks that use the resin display better inner-coat adhesion which is ideal for coatings and base primers. Reactol™ 1717 A is suitable for use in vinyl sealers and coatings, flexographic and rotogravure inks, heat-seal coatings and in laminating inks. 收起 | |
| ADDITOL® VXL 4950 | Allnex | 塑料制品的附著力促進底漆 | Request Sample |
| VISIOMER® DMAPMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® DMAPMA is an amino functional methacrylate monomer that is used to improve pigment wetting and substrate adhesion to polymers. Suggested applications include paints and coatings, paper and water and cosmetic applications. | |
| EBECRYL® 117 | Allnex | EBECRYL® 117 is a low odor aliphatic mono-functional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion. | Request Sample |
| RESYDROL® SF 8000w/50WA | Allnex | RESYDROL® SF 8000W/50WA is an ammonia neutralized oil-modified acrylic, ADH free, multi-domain dispersion. It can be used for indoor trim applications, multi adhesion coatings and anti-tannin bleed systems. | Request Sample |
| DAOTAN® VTW 6421/42WA | Allnex | Daotan® VTW 6421/42WA is a waterborn, clear solution of polyurethane resin, and has excellent adhesion and flexibility properties. It can be used as additional binder in 1pack and 2pack coating formulations and adhesives. | Request Sample |
| VISIOMER® TRGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TRGDMA is a low viscosity dimethacrylate monomer that is ideal for use as a crosslinking agent for free radical polymerization, adhesion promoter and hardener for PVC plastisols, and component in reactive resins. | |
| Barniz ON-2 | Simon Quimica | Barniz ON-2 is a recubrimento for wood or concrete floors where high abrasion resistance, gloss and adhesion are required. It's viscosity is 45+/-10 copa Ford #4, and % solids is 46+/-2. | |
| VIALKYD® AQ-518 | Allnex | VIALKYD® AQ 518 is an alkyd resin in castor oil. It offers excellent adhesion and high gloss. This product provides good wetting of pigments and drying, as well as great flexibility and spread. | Request Sample |
| VIALKYD® AQ-452 | Allnex | VIALKYD® AQ 518 is an alkyd resin in castor oil. It offers excellent adhesion and high gloss. This product provides good wetting of pigments and drying, as well as great flexibility and spread. | Request Sample |
| Silane Coupling Agent KH-591 | Zhejiang Feidian Chemical Co., Ltd. | Silane Coupling Agent KH-591 is a versatile mercapto functional silane suitable to promote the adhesion between fillers such as silica and sulfur crosslinked rubber such as NR, SBR, BR, EPDM and more. | |
| EBECRYL® 113 | Allnex | EBECRYL® 113 is a low odour aliphatic monofunctional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion to plastics. | Request Sample |
| ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content. | Request Sample |
| EBECRYL® 441 | Allnex | EBECRYL® 441 is a modified chlorinated polyester, free from intentionally added Bisphenol A. Films of EBECRYL® 441 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. | Request Sample |
| VISIOMER® THFMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® THFMA is a low viscosity, low odor mono methacrylate monomer that impacts flexibility and adhesion to adhesive applications. Due to its low volatility, it can be used as reactive diluent for reactive systems, e.g. adhesives | |
| CYREZ® CRA 200-300 Product Family (72% HMMM) | Allnex | CYREZ® 200-300 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 72% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to ...展開 CYREZ® 200-300 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 72% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinforcement materials. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. These products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions. 收起 | Request Sample |
| EBECRYL® 438 | Allnex | EBECRYL® 438 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent OTA-480. It exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Films of EBECRYL® 438 cured by ultraviolet light (UV) display good adhesion to metals, plastics and paper. EBECRYL® 438 is recommended for: wet lithographic inks for paper, plastics, and metals, promoting adhesion...展開 EBECRYL® 438 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent OTA-480. It exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Films of EBECRYL® 438 cured by ultraviolet light (UV) display good adhesion to metals, plastics and paper. EBECRYL® 438 is recommended for: wet lithographic inks for paper, plastics, and metals, promoting adhesion for coatings on metal, plastics and paper, overprint varnishes applied by lithography, and post-formable inks. 收起 | Request Sample |
| EBECRYL® 418 | Allnex | EBECRYL® 418 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted in OTA 480. Films of EBECRYL® 418 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| BYK®-4512 | BYK | BYK®-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner. | |
| VISIOMER® TMPTMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TMPTMA is a trifunctional methacrylate monomer. It is ideal for use as a crosslinking agent in free radical polymerization, as adhesion promoter and hardener for PVC plastisol, and coagent for peroxide crosslinking of elastomers. | |
| VISIOMER® MADAME™ | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MADAME™ is a monofunctional methacrylate with a tertiary amino group in the side chain. Ideal for improving adhesion of formulations. Also used for the preparation of cationic polymers, especially quaternary ammonium polymers and flocculants. | |
| BYK®-4509 | BYK | BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups. | |
| ADDITOL® SXK 407 N | Allnex | ADDITOL® SXK 407 N is a catalyst for heat curing phenolic resins and combinations of phenolic- and epoxide resins. The addition of ADDITOL SXK 407 N also results in improved adhesion and resistance against sulphur staining. | Request Sample |
| EBECRYL® 3418 | Allnex | EBECRYL® 3418 is a modified epoxy diacrylate that exhibits excellent reactivity and low viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical ...展開 EBECRYL® 3418 is a modified epoxy diacrylate that exhibits excellent reactivity and low viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance. 收起 | Request Sample |
| EBECRYL® 411 | Allnex | EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacr...展開 EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacrylate (DPGDA)(1) monomer. 收起 | Request Sample |
| EBECRYL® 416 | Allnex | EBECRYL® 416 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with trimethylolpropane triacrylate (TMPTA) (1) monomer. Films of EBECRYL® 416 cured by ultraviolet light (UV) or electron beam (EB) display good adhesion to...展開 EBECRYL® 416 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with trimethylolpropane triacrylate (TMPTA) (1) monomer. Films of EBECRYL® 416 cured by ultraviolet light (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. 收起 | Request Sample |
| MR-424 | LUKEM D.O.O. | MR-424 is a gum rosin modified maleic resin. The product has a stable color and exhibits good heat resistance and adhesion. With a softening point between 120ºC and 130ºC, MR-424 is intended for use in paints, inks, and adhesives. | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| PHENODUR® VPW 1947/50WA | Allnex | PHENODUR® VPW 1947/50WA is a real self-crosslinking grade, can be used either as sole binder, or in combination with backbone binders, good adhesion on various metal substrates, excellent chemical/acid resistance, high hardness & heat resistance. | Request Sample |
| SETAQUA® 37-3372 | Allnex | SETAQUA® 37-3372 (formerly SETAQUA® 6472) is an acrylic copolymer emulsion for industrial air dry enamels and maintenance primers. Coatings formulated with SETAQUA® 37-3372 exhibit excellent adhesion properties, exterior durability and good stain and wate...展開 SETAQUA® 37-3372 (formerly SETAQUA® 6472) is an acrylic copolymer emulsion for industrial air dry enamels and maintenance primers. Coatings formulated with SETAQUA® 37-3372 exhibit excellent adhesion properties, exterior durability and good stain and water resistance. 收起 | Request Sample |
| SILIKOFTAL® HTL 1 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 1 is a methoxy-functional silicone polyester resin. It is a cost-efficient resin with excellent adhesion to aluminum, steel, and stainless steel. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...展開 ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. 收起 | |
| EBECRYL® 872 | Allnex | EBECRYL® 872 is polyester acrylate resin. Films of EBECRYL® 872 cured by ultraviolet light (UV) or electron beam (EB) exhibits excellent adhesion, high toughness and flexibility. EBECRYL® 872 is recommended for sealers for parquet floor and furniture appl...展開 EBECRYL® 872 is polyester acrylate resin. Films of EBECRYL® 872 cured by ultraviolet light (UV) or electron beam (EB) exhibits excellent adhesion, high toughness and flexibility. EBECRYL® 872 is recommended for sealers for parquet floor and furniture applications. 收起 | Request Sample |
| SETALUX® 17-1447 | Allnex | SETALUX® 17-1447 acrylic polyol, with 4.2% OH, that when combined with appropriate aliphatic polyisocyanates, provides excellent application and appearance properties and the good attributes of DOI, adhesion and outdoor durability. SETALUX® 17-1447 also p...展開 SETALUX® 17-1447 acrylic polyol, with 4.2% OH, that when combined with appropriate aliphatic polyisocyanates, provides excellent application and appearance properties and the good attributes of DOI, adhesion and outdoor durability. SETALUX® 17-1447 also possesses good flexibility. 收起 | Request Sample |
| SETALUX® 27-1026 | Allnex | SETALUX® 27-1026 acrylic polyol provides ease of coating application, good adhesion and good flexibility when crosslinked with aliphatic isocyanates. Coatings formulations with this resin exhibit superior flow, gloss, gloss retention, corrosion resistance...展開 SETALUX® 27-1026 acrylic polyol provides ease of coating application, good adhesion and good flexibility when crosslinked with aliphatic isocyanates. Coatings formulations with this resin exhibit superior flow, gloss, gloss retention, corrosion resistance and other high performance properties. 收起 | Request Sample |
| EBECRYL® 417 | Allnex | EBECRYL® 417 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with EBECRYL® 50, a tetra functional diluting acrylate. Films of EBECRYL® 417 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals...展開 EBECRYL® 417 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with EBECRYL® 50, a tetra functional diluting acrylate. Films of EBECRYL® 417 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. 收起 | Request Sample |
| Silane Coupling Agent KH-7180 | Zhejiang Feidian Chemical Co., Ltd. | KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This ...展開 KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This product is recommended for automotive laminate adhesives, furniture laminate adhesives, and flocking adhesives. 收起 | |
| Hydro-Rez™ 1400D A | Lawter | Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that...展開 Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH adjustment on the press. Hydro-Rez™ 1400D A provides gloss, low odor, adhesion, fast drying speed, rub, transparency and scuff resistance to coatings, inks and primers. It is suitable for use in waster-based coatings and primers and in water-based gravure and flexo inks. 收起 | |
| VISIOMER® 1,4-BDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers...展開 VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers. 收起 | |
| EBECRYL® 168 | Allnex | EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube...展開 EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, solder resist formulations. 收起 | Request Sample |
