ADDAPT® Anticor™ A3N | ADDAPT Chemicals BV | ADDAPT® Anticor™ A3N is a proprietary blend of phosphonates and organic silicates. It is used as a water-free aluminum anti-corrosion additive in metal working fluids, coatings, ester based lubricants, and textile fluids. | |
ADDAPT® Anticor™ A40 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegr...展開 ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegradable, and is not restricted by the hardness of the water. 收起 | |
ADDAPT® Anticor™ A65N | ADDAPT Chemicals BV | ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pi...展開 ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pitting on the metal surface, is biodegradable, and is not restricted by the hardness of the water. 收起 | |
ADDAPT® Anticor™ A84 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restr...展開 ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restricted by the hardness of the water. It is used in coatings, printing inks, lubricants, textile fluids, and cleaners. 收起 | |
ADDAPT® Anticor™ AMC 2330 | ADDAPT Chemicals BV | ADDAPT® Anticor™ AMC 2330 is a proprietary blend phosphonates and glycol ethers. It is added to coatings as an anti-corrosion additive to protect aluminum and magnesium. This product is low-foaming, controls pitting on the metal surface, and is not restri...展開 ADDAPT® Anticor™ AMC 2330 is a proprietary blend phosphonates and glycol ethers. It is added to coatings as an anti-corrosion additive to protect aluminum and magnesium. This product is low-foaming, controls pitting on the metal surface, and is not restricted by the hardness of the water. 收起 | |
ADDAPT® Anticor™ C 10N | ADDAPT Chemicals BV | ADDAPT® Anticor™ C 10N is a proprietary mixture of modified monophosphate and diphosphate esters. It is used as a metal passivator in lacquers and paints. This product does not contain BTA, TTA, or amine. | |
ADDAPT® Anticor™ C 6 | ADDAPT Chemicals BV | ADDAPT® Anticor™ C 6 is a proprietary mixture of modified monophosphate and diphosphate esters. It is used as a metal passivator in lacquers and paints. This product is BTA, TTA, and amine free. | |
ADDAPT® Anticor™ L 4783 | ADDAPT Chemicals BV | ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, solub...展開 ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, soluble in water, and is not restricted by the hardness of water. 收起 | |
ADDAPT® Ferrocor™ Flash | ADDAPT Chemicals BV | ADDAPT® Ferrocor™ Flash is a proprietary blend of phosphate salts and phosphonoxy esters. It is used as a corrosion inhibitor for ferrous and zinc surfaces. This product is water soluble and can be added to emulsion paints, lacquers, and textile fluids. | |
ADDITOL® XL 6557 | Allnex | Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gl...展開 Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gloss, good drying properties, and good water/weather resistance. It is recommended for solvent-borne industrial applications, such as coil coatings, marine and heavy duty anti-corrosive paints, agriculture, industrial wood, and other metal coatings. 收起 | Request Sample |
AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | 一種憎水氣相二氧化硅,基於比表面積為130 m2/g的親水氣相二氧化硅,用二甲基二氯硅烷后處理。 | Request Sample |
AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...展開 AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. 收起 | Request Sample |
ALKATERGE®-T | ANGUS Chemical Company | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展開 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
ALUMINASOL™ AS-200 | Nissan Chemical America Corporation | 膠體水合氧化鋁,可應用於催化劑、玻璃纖維、織物、紡織品和合成纖維等多種領域 | Request Sample |
Amorphic™ A450 | Bunge Amorphic Solutions, LLC. | Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展開 Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in interior, exterior, and marine applications. 收起 | |
Amorphic™ A950 | Bunge Amorphic Solutions, LLC. | Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, d...展開 Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in coatings and high performance binder systems. 收起 | |
Amorphic™ C120 | Bunge Amorphic Solutions, LLC. | Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展開 Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
Amorphic™ I200 | Bunge Amorphic Solutions, LLC. | Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展開 Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
Amorphic™ I700 | Bunge Amorphic Solutions, LLC. | Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, a...展開 Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, and refinish applications. 收起 | |
ASCONIUM® 110 | ASCOTEC | ASCONIUM® 110 is a liquid corrosion inhibitor for long-term protection of dry film coatings, mainly used in solventborne alkyd clear coats. | Request Sample |
ASCONIUM® 111 | ASCOTEC | ASCONIUM® 111 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd, urethane-alkyd, 1K or 2K polyurethane resins. | Request Sample |
ASCONIUM® 112 | ASCOTEC | ASCONIUM® 112 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on pure or modified alkyd, polyester, 1K or 2K polyurethane resins. | Request Sample |
ASCONIUM® 114 | ASCOTEC | ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins. | Request Sample |
ASCONIUM® 130 | ASCOTEC | ASCONIUM® 130 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints; It is mainly used in waterborne or solventborne epoxy resins. | Request Sample |
ASCONIUM® 140 | ASCOTEC | ASCONIUM® 140 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on alkyd or urethane-alkyd resins, and waterborne paints based on 1K or 2K polyurethane resins. | Request Sample |
ASCONIUM® 141S1 | ASCOTEC | ASCONIUM® 141S1 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on 2K acrylic or 2K PU resins, and waterborne paints based on epoxy resins. | Request Sample |
ASCONIUM® 142DA | ASCOTEC | ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
ASCONIUM® 143 | ASCOTEC | ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. | Request Sample |
ASCONIUM® 144DA | ASCOTEC | ASCONIUM® 144DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
新 ASCONIUM® 500 | ASCOTEC | ASCONIUM® 500 is a liquid corrosion inhibitor for long-term protection of DTM clear coats or paints. It is VOC and heavy metal free, tailored for post addition and designed for water-based formulations based on acrylic, alkyd, epoxy, and PU binders. | Request Sample |
ASCOTRAN® AL4 | ASCOTEC | ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the...展開 ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
ASCOTRAN® H10 | ASCOTEC | ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...展開 ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
ASCOTRAN® H14 | ASCOTEC | ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and...展開 ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
ASCOTRAN® H17 | ASCOTEC | ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...展開 ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
ASCOTRAN® H18 | ASCOTEC | ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during dryin...展開 ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...展開 ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
ASCOTRAN® HPB | ASCOTEC | ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and a...展開 ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
ASCOTRUST® X1 | ASCOTEC | ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
ASCOTRUST® X2 | ASCOTEC | ASCOTRUST® X2 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne clear coatings to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
ASCOTRUST® X4 | ASCOTEC | ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...展開 BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. 收起 | Request Sample |
BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
BECKOCURE™ EH 2260w/41WA | Allnex | Beckocure® EH 2260w/41WA是一種疏水性胺類固化劑,推薦用於水性金屬塗料配方,不含揮發性堿性胺和溶劑。結合環氧乳液,可配制具有出色的防腐性及非常好的不流掛性能的快幹底漆和單塗。該產品具有出色的施工性能和非常強大的性能,即使在前處理不良的表面上也一樣。 | Request Sample |
Benzotriazole | ChemCeed | Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for ...展開 Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for photography, and use as a lubricant additive. 收起 | |
BRB Siloen® SR 313 | BRB International BV | BRB Siloen® SR 313 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
BRB Siloen® SR 379 | BRB International BV | BRB Siloen® SR 379 is a hard methyl silicone resin 50% active in organic solvents. It can be used as a binder for heat resistant and anti-corrosive paints. | |
BRB Siloen® SR 379N | BRB International BV | BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat r...展開 BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat resistant and anti-corrosive paints. 收起 | |
BRB Siloen® SR 383 | BRB International BV | BRB Siloen® SR 383 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
Chlorinated Rubber-YURON CR-40 | Yuron New Material | YURON CR-40 is a chlorinated rubber supplied in the form of a white powder. It is used as a binder for anti-corrosion coatings and adhesives. This product is also recommended as a combination binder for alkyd resins and adhesive resins. | |
Chlorinated Rubber-YURON CR-90 | Yuron New Material | YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins. | |
Chromic Acid | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chromic Acid, in the form of a dark purplish red-flake, is a metallic acid. This product can be used in sealing phosphate coatings applied to iron or steel. Its melting point is 197 degrees Celsius, and is soluble in water. This product is both poisono...展開 Chromic Acid, in the form of a dark purplish red-flake, is a metallic acid. This product can be used in sealing phosphate coatings applied to iron or steel. Its melting point is 197 degrees Celsius, and is soluble in water. This product is both poisonous and corrosive. 收起 | |
CoatOSil* FLX Coating Modifier | Momentive | CoatOSil* FLX is a polysiloxane resin modifier for silane/polysiloxane containing coatings, including hybrids. It improves coating flexibility, gloss retention under harsh weathering conditions, and corrosion performance in neutral spray testing. This pro...展開 CoatOSil* FLX is a polysiloxane resin modifier for silane/polysiloxane containing coatings, including hybrids. It improves coating flexibility, gloss retention under harsh weathering conditions, and corrosion performance in neutral spray testing. This product is compatible with many organic resin systems and pigments. 收起 | |
CV-1142 | NuSil Silicone Technology 1 | CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive d...展開 CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. Furthermore, it is also best used for applications requiring extremely low temperatures. 收起 | |
CV3-1144-1 | NuSil Silicone Technology 1 | CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provid...展開 CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provides protection from thermal stress and radiation. 收起 | |
Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...展開 Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. 收起 | |
Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...展開 Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. 收起 | |
Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...展開 Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. 收起 | |
Dextrol™ OC-1025 | Ashland | Dextrol™ OC-1025 is ammonium hydroxide salt neutralized gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
Dextrol™ OC-1525 | Ashland | Dextrol™ OC-1525 is ammonium hydroxide salt neutralized gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
Dextrol™ OC-180 | Ashland | 它是一種乙氧基化脂肪醇磷酸酯的中和態(鉀鹽)。它設計用於為水性乳膠漆改善光澤度和顏色接受性 | |
Dextrol™ OC-4025 | Ashland | Dextrol™ OC-4025 is ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
Dextrol™ OC-45N | Ashland | Dextrol™ OC-45N is sodium salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展開 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
Durazane® 1500 rapid cure | Merck | Durazane® 1500 rapid cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications. | |
Durazane® 1500 slow cure | Merck | Durazane® 1500 slow cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications. | |
Durazane® 5500 | Merck | Durazane® 5500 is a composite material consisting of an amorphous SiO2 core and a polymer cladding material. Since the nano particles are completely incoperated in a polymeric matrix, no nanoscalic dust is produced when the solvent is removed. The dried r...展開 Durazane® 5500 is a composite material consisting of an amorphous SiO2 core and a polymer cladding material. Since the nano particles are completely incoperated in a polymeric matrix, no nanoscalic dust is produced when the solvent is removed. The dried residue has polymeric characteristics like film building and transparent properties. 收起 | |
ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展開 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
HALOX® 350 | ICL Phosphate Specialty | HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odo...展開 HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odor, nitrite-free, di-carboxylic acid-based grade. It is very effective at low loading levels and offers temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors. It is compatible with water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It is also used in clear coats, thin films, and coil coatings. The recommended dosage level is 0.2-0.8% based on total solids formulation. It has a shelf life of 36 months. 收起 | Request Sample |
HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...展開 HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. 收起 | Request Sample |
HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...展開 HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. 收起 | Request Sample |
HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...展開 HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. 收起 | Request Sample |
HALOX® 515 LFG | ICL Phosphate Specialty | HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effect...展開 HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin-film applications (<2 mils). It is heavy metal- & nitrite-free grade and contains no chromates or phosphates. It offers improved adhesion at the scribe and good humidity resistance. HALOX® 515 LFG can easily and effectively be post-added or added in the letdown stage of any coating system. Recommended loading level is 1-3% based on total formula weight. It has a shelf life of 24 months. 收起 | Request Sample |
HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active ...展開 HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. 收起 | Request Sample |
HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-...展開 HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. 收起 | Request Sample |