| Atrepur HS 500/70 D4 | Atcoat GmbH | Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...展開 Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 500/70 D4 has an oil length of 57, a solid of 70%, and a viscosity of 9000 to 12000 mPas. 收起 | |
| Atrepur HS 550/70 D4 | Atcoat GmbH | Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...展開 Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 550/70 D4 has an oil length of 58, a solid of 70%, and a viscosity of 13000 to 17000 mPas. 收起 | |
| Atrepur HS 600/70 IPL | Atcoat GmbH | Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and...展開 Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 600/70 IPL has an oil length of 63, a solid of 70%, and a viscosity of 5000 to 9000 mPas. 收起 | |
| Atrepur HS 700/70 D4 | Atcoat GmbH | Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...展開 Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 700/70 D4 has an oil length of 60, a solid of 70%, and a viscosity of 9000 to 13000 mPas. 收起 | |
| Atrepur HS 800/80 D4 | Atcoat GmbH | Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...展開 Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 800/80 D4 has an oil length of 60, a solid of 80%, and a viscosity of 4000 to 8000 mPas. 收起 | |
| BYD3510 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-r...展開 BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3520 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3520, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in two-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| CHS-Alkyd AL 7310 | Spolchemie | CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for ...展開 CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for printing inks as a binder for offset, heatset and metal decorating inks. CHS-Alkyd AL 7150 has good color retention, water resistance and pigment wetting. 收起 | |
| CHS-Alkyd SU 621 N 50 | Spolchemie | CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic conte...展開 CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. 收起 | |
| CHS-Alkyd SU 632 N 60 | Spolchemie | CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is ju...展開 CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. 收起 | |
| CHS-Alkyd SU 671 W 60 | Spolchemie | CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is ...展開 CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is primarily used for fast air-drying coatings for interior and exterior applications. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展開 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展開 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展開 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展開 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| Epokukdo KEM-128-70 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-128-70 is a 70% solids content emulsion based on bisphenol-A liquid epoxy resin. KEM-128-70 cured in combination with water dispersible hardeners, DOCURE KH-700 or KH-721, exhibits especially good adhesion to most substrates and has good phys...展開 Epokukdo KEM-128-70 is a 70% solids content emulsion based on bisphenol-A liquid epoxy resin. KEM-128-70 cured in combination with water dispersible hardeners, DOCURE KH-700 or KH-721, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance. 收起 | |
| Epokukdo KEM-134-60 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-134-60 is a 60% solid content emulsion based on bisphenol-A semisolid epoxy resin. KEM-134-60 cured in combination with water dispersible hardeners, DOCURE KH-721, KH723 or KH-748, exhibits especially good adhesion to most substrates and has ...展開 Epokukdo KEM-134-60 is a 60% solid content emulsion based on bisphenol-A semisolid epoxy resin. KEM-134-60 cured in combination with water dispersible hardeners, DOCURE KH-721, KH723 or KH-748, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance. KEM-134-60/DOCURE KH-721,KH-723 or KH-748 waterborne systems have been in used coating areas. 收起 | |
| Epokukdo KEM-172-60 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-172-60 is an aqueous epoxy resin emulsion based on a dimer acid modified epoxy resin. KEM-172-60 cured in combination with water dispersible hardeners, Docure KH-723,KH-721 or KH-700, exhibits especially good adhesion to most substrates and h...展開 Epokukdo KEM-172-60 is an aqueous epoxy resin emulsion based on a dimer acid modified epoxy resin. KEM-172-60 cured in combination with water dispersible hardeners, Docure KH-723,KH-721 or KH-700, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance, good flexibility. 收起 | |
| Epokukdo KR-202C | Kukdo Chemical Co., Ltd. | Epokukdo KR-202C is a NBR modified epoxy resin with mixed solvent. Accordingly, KR-202C shows good toughness, outstanding adhesion strength and excellent peeling strength at the elevated temperature. KR-202C has good compatibility with a conventional epox...展開 Epokukdo KR-202C is a NBR modified epoxy resin with mixed solvent. Accordingly, KR-202C shows good toughness, outstanding adhesion strength and excellent peeling strength at the elevated temperature. KR-202C has good compatibility with a conventional epoxy resin and hardener. with excellent flexibility, adhesion strength and toughness for a wide range of temperatures. It also has good water resistance with excellent oil resistance. 收起 | |
| Epokukdo KR-207 | Kukdo Chemical Co., Ltd. | epokukdo KR-207 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin with tri-functional epoxy resin. Accordingly, KR-207 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temper...展開 epokukdo KR-207 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin with tri-functional epoxy resin. Accordingly, KR-207 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-207 is especially used in formulating for the molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. 收起 | |
| Epokukdo KR-208 | Kukdo Chemical Co., Ltd. | Epokukdo KR-208 is a NBR modified epoxy resin including epoxy diluents. Accordingly, KR-208 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-208 has good compatibility with a conventional...展開 Epokukdo KR-208 is a NBR modified epoxy resin including epoxy diluents. Accordingly, KR-208 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-208 has good compatibility with a conventional epoxy resin and hardeners with excellent flexibility, adhesion strength and toughness for the wide range of temperatures. It also has good water resistance and excellent oil resistance. 收起 | |
| Epokukdo KR-450 | Kukdo Chemical Co., Ltd. | Epokukdo KR-450 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-450 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-450 is especially used ...展開 Epokukdo KR-450 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-450 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-450 is especially used in formulating for the molding and sealing with outstanding adhesion, excellent impact strength, good flexural strength and water resistance both at the ambient temperature and at the low temperature. 收起 | |
| Epokukdo KR-909 | Kukdo Chemical Co., Ltd. | Epokukdo KR-909 is a NBR modified epoxy resin, which has good flexibility, adhesion strength and excellent peeling strength. KR-909 is mainly used in various industrial adhesive applications. It has good compatibility with conventional epoxy resin and har...展開 Epokukdo KR-909 is a NBR modified epoxy resin, which has good flexibility, adhesion strength and excellent peeling strength. KR-909 is mainly used in various industrial adhesive applications. It has good compatibility with conventional epoxy resin and hardener as DICY. With improved impact strength and adhesive strength, especially peeling strength. And has good toughness for wide range of temperature. As well as god water resistance and chemical resistance. 收起 | |
| Epokukdo UME-305 | Kukdo Chemical Co., Ltd. | Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...展開 Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| Epokukdo UME-315 | Kukdo Chemical Co., Ltd. | Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...展開 Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| Epokukdo UME-330 | Kukdo Chemical Co., Ltd. | Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact s...展開 Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展開 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展開 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| Ongronat® 2100 | BorsodChem Rt. | Ongronat® 2100 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as an adhesive, coating and sealant in construction applications. This produ...展開 Ongronat® 2100 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as an adhesive, coating and sealant in construction applications. This product has low thermal conductivity, excellent insulation properties, and is both weather- and water-resistant. 收起 | |
| PLIOTEC® 7104E | Omnova Solutions | PLIOTEC® 7104E is a carboxylated styrene acrylic dispersion used in coatings that form resistant films with excellent adhesion to concrete. PLIOTEC® 7104E is very suitable for waterproofing sealers or one pack floor coatings with abrasion resistance, exce...展開 PLIOTEC® 7104E is a carboxylated styrene acrylic dispersion used in coatings that form resistant films with excellent adhesion to concrete. PLIOTEC® 7104E is very suitable for waterproofing sealers or one pack floor coatings with abrasion resistance, excellent hardness development, hot-tire pick up resistance and very good resistance to automotive chemicals. 收起 | |
| PLIOTEC® SA 40 | Omnova Solutions | PLIOTEC® SA 40 is a carboxylated styrene acrylic dispersion used in coatings with excellent adhesion to concrete, water resistance and pigment binding capability. PLIOTEC® SA 40 resin is particularly suitable for low VOC odorless waterproofing sealers and...展開 PLIOTEC® SA 40 is a carboxylated styrene acrylic dispersion used in coatings with excellent adhesion to concrete, water resistance and pigment binding capability. PLIOTEC® SA 40 resin is particularly suitable for low VOC odorless waterproofing sealers and exterior masonry pigmented primers, providing excellent resistance to alkali and efflorescence, even on fresh concrete or renovation mortars. 收起 | |
| PLIOWAY® EC1 | Omnova Solutions | PLIOWAY® EC1 is a vinyl acrylate copolymer. This newtonian film forming resin is soluble in low odour dearomatized solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on EC1 form...展開 PLIOWAY® EC1 is a vinyl acrylate copolymer. This newtonian film forming resin is soluble in low odour dearomatized solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on EC1 form by solvent evaporation, with low internal tension, making them ideal for rapid renovation of old problematic coatings. Typical applications include: stain blocking, waterproofing, correction fluids, intumescent coatings. 收起 | |
| PLIOWAY® ECT | Omnova Solutions | PLIOWAY® ECT is a vinyl acrylate copolymer. This thermoplastic resin is a unique film forming rheological resin that, once dissolved in low odour dearomatized solvents, develops a gel with a pseudoplastic behavior. PLIOWAY® ECT forms tension free, tough, ...展開 PLIOWAY® ECT is a vinyl acrylate copolymer. This thermoplastic resin is a unique film forming rheological resin that, once dissolved in low odour dearomatized solvents, develops a gel with a pseudoplastic behavior. PLIOWAY® ECT forms tension free, tough, chemically resistant films and, when used alone or with EC1, is ideally suited for a wide variety of end-uses such as stainblocking, waterproofing, thick or textured coatings. 收起 | |
| PLIOWAY® Ultra 200 | Omnova Solutions | PLIOWAY® Ultra 200 is a vinyl acrylate copolymer. This newtonian film forming resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ul...展開 PLIOWAY® Ultra 200 is a vinyl acrylate copolymer. This newtonian film forming resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ultra 200 form by solvent evaporation, with low internal tension, making them ideal for renovation of old problematic coatings. Typical applications include: stain blocking, waterproofing, correction fluids, intumescent coatings. 收起 | |
| SIRALES® PE 6210/F | SIR Industriale SpA | SIRALES® PE 6210/F is a 10% acrylic flow agent in hydroxylated resin with a 35-50 mgKOH/g hydroxyl value. It has good outdoor resistance and is well suited for use as a masterbatch flow agent. | |
| SIRALES® PE 6215/F | SIR Industriale SpA | SIRALES® PE 6215/F is a 15% acrylic flow agent in hydroxylated resin with a 35-50 mgKOH/g hydroxyl value. It has good outdoor resistance and is well suited for use as a masterbatch flow agent. | |
| SiSiB® PC5131 | SiSiB SILICONES | SiSiB® PC5131 is a colorless clear liquid. It is an alkylalkoxysilane that hydrolyzes slowly in the presence of moisture (methanol released) to form reactive silanols, which react further to produce oligosiloxanes and then polysiloxanes. It is used main...展開 SiSiB® PC5131 is a colorless clear liquid. It is an alkylalkoxysilane that hydrolyzes slowly in the presence of moisture (methanol released) to form reactive silanols, which react further to produce oligosiloxanes and then polysiloxanes. It is used mainly to render surfaces and material water repellent, but can also be used in the production of silicone resins and condensation-curing silicone rubber, and as a component in sol-gel systems. 收起 | |
| SiSiB® PC5132 | SiSiB SILICONES | SiSiB® PC5132 is a colorless clear liquid. It hydrolyzes slowly in the presence of moisture to form reactive silanols. It may be used as a water repellent to improve fillers dispersibility and reduces the sedimentation tendency, or as a component in sol-...展開 SiSiB® PC5132 is a colorless clear liquid. It hydrolyzes slowly in the presence of moisture to form reactive silanols. It may be used as a water repellent to improve fillers dispersibility and reduces the sedimentation tendency, or as a component in sol-gel coating, silicone resins, and silicone rubber. 收起 | |
| SiSiB® PC5821 | SiSiB SILICONES | SiSiB® PC5821 is a clear to straw liquid. It is a long-chain alkyl silane. It can be used as a water-repellent by impregnation due to its hydrophobicity, or for the treatment of mineral fillers and pigments or inorganic surfaces. | |
| SiSiB® PC5861 | SiSiB SILICONES | SiSiB® PC5861 is a clear to straw liquid. It is a monomeric long chain alkyfunctional silane. It can be used as a water-repellent or surface modifier due to its hydrophobicity, as a mineral filler treatment, as a scorch retardant in moisture crosslinked...展開 SiSiB® PC5861 is a clear to straw liquid. It is a monomeric long chain alkyfunctional silane. It can be used as a water-repellent or surface modifier due to its hydrophobicity, as a mineral filler treatment, as a scorch retardant in moisture crosslinked write and cable compounds, or for polyolefin production. 收起 | |
| SiSiB® PC5901 | SiSiB SILICONES | SiSiB® PC5901 is a colorless transparent liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, and when diluted with an appropriate solvent, can be used in for the formulation of ...展開 SiSiB® PC5901 is a colorless transparent liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, and when diluted with an appropriate solvent, can be used in for the formulation of water repellent products. 收起 | |
| SiSiB® PC5902 | SiSiB SILICONES | SiSiB® PC5902 is a colorless transparent liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, and when diluted with an appropriate solvent, can be used in for the formulation of wa...展開 SiSiB® PC5902 is a colorless transparent liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, and when diluted with an appropriate solvent, can be used in for the formulation of water repellent products. 收起 | |
| SiSiB® PC5904 | SiSiB SILICONES | SiSiB® PC5904 is a clear to straw liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, or when diluted with an appropriate solvent, can be used in the formulation of water repell...展開 SiSiB® PC5904 is a clear to straw liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, or when diluted with an appropriate solvent, can be used in the formulation of water repellent products. 收起 | |
| Tackwhite A 2P 50 | Ichemco | Tackwhite A 2P 50 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 2P 50 is most commonly used in pressure sensitive article productio...展開 Tackwhite A 2P 50 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 2P 50 is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. 收起 | |
| Tackwhite A 2P 50 (V) | Ichemco | Tackwhite A 2P 50 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Tackwhite A 2P 50 (V) is most commonly used in pressure sensitive article ...展開 Tackwhite A 2P 50 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Tackwhite A 2P 50 (V) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. 收起 | |
| Tackwhite A 2P 50 (V1) | Ichemco | Tackwhite A 2P 50 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 2P 50 (V1) is most commonly used in pressure sensitive ar...展開 Tackwhite A 2P 50 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 2P 50 (V1) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. 收起 | |
| Tackwhite A 2P 50 (V2) | Ichemco | Tackwhite A 2P 50 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 50 (V2) is most commonly used in pressure sensitive ar...展開 Tackwhite A 2P 50 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 50 (V2) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. 收起 | |
| Tackwhite A 2P 60 | Ichemco | Tackwhite A 2P 60 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 600-900 mPa.s. Tackwhite A 2P 60 is most commonly used in pressure sensitive article production...展開 Tackwhite A 2P 60 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 600-900 mPa.s. Tackwhite A 2P 60 is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. 收起 | |
| Tackwhite A 2P 60 (V) | Ichemco | Tackwhite A 2P 60 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 4000-5000 mPa.s. Tackwhite A 2P 60 (V) is most commonly used in pressure sensitive article ...展開 Tackwhite A 2P 60 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 4000-5000 mPa.s. Tackwhite A 2P 60 (V) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. 收起 | |
| Tackwhite A 2P 60 (V2) | Ichemco | Tackwhite A 2P 60 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 60 (V2) is most commonly used in pressure sensitive ar...展開 Tackwhite A 2P 60 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 60 (V2) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. 收起 | |
| Tackwhite A 4 MED | Ichemco | Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applicatio...展開 Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. 收起 | |
| Tackwhite A 4 MED (V2) | Ichemco | Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive ar...展開 Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. 收起 | |
| Tackwhite A5 MED | Ichemco | Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production...展開 Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production where high adhesion, water resistance, and cold resistance are required. 收起 | |
| Ucopol OL 18 50 X | S.A.P.I.C.I. SpA | Ucopol OL 18 50 X is an oleo-urethanic resin. This product dries quickly with good weather resistance and hardness. It can be used in anti-corrosive paints and as an impregnating agent for wood. This product has been obtained from renewable raw material...展開 Ucopol OL 18 50 X is an oleo-urethanic resin. This product dries quickly with good weather resistance and hardness. It can be used in anti-corrosive paints and as an impregnating agent for wood. This product has been obtained from renewable raw materials. 收起 |
