| 1,2-Bis(Tetrabromophthalimido) Ethane | Hainan Zhongxin Chemical Co., Ltd. | 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC a...展開 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC alloy, PC, LDPE and PBT. 收起 | |
| Ammonium Polyphosphate(APP) | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate (APP) is a highly efficient, nontoxic inorganic flame retardant. This product has a low water solubility, and a high phosphorus and nitrogen content. Ammonium Polyphosphate (APP) is most commonly used as a flameproof coating for mul...展開 Ammonium Polyphosphate (APP) is a highly efficient, nontoxic inorganic flame retardant. This product has a low water solubility, and a high phosphorus and nitrogen content. Ammonium Polyphosphate (APP) is most commonly used as a flameproof coating for multistory buildings, ships, trains, and cable applications. 收起 | |
| Ammonium Polyphosphate(Phase II) | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate(Phase II) is a non halogen flame retardant. This product decomposes to a polymeric acid and ammonia when exposed to fire or heat. Ammonium Polyphosphate(Phase II) is most commonly used in plastics (PP, PVC, and PE), polyesters, rubb...展開 Ammonium Polyphosphate(Phase II) is a non halogen flame retardant. This product decomposes to a polymeric acid and ammonia when exposed to fire or heat. Ammonium Polyphosphate(Phase II) is most commonly used in plastics (PP, PVC, and PE), polyesters, rubber, and expandable fireproof coating. 收起 | |
| Ammonium Polyphosphate(phase-II) treated by epoxy resin | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate(phase-II) treated by epoxy resin solubility in water is very low and has less influence in polymers. This product is most commonly used in epoxy resin, polyurethane, and textile coating applications. | |
| Antimony Trioxide | Hainan Zhongxin Chemical Co., Ltd. | Antimony Trioxide is a fine white powder with a particle size of about 0.8 - 1.2um, and is 99.5% pure. It is primarily used as a flame retardant in plastics, rubber, paints, paper, textiles, and electronics. It can also be used as a catalyst, a clarifyin...展開 Antimony Trioxide is a fine white powder with a particle size of about 0.8 - 1.2um, and is 99.5% pure. It is primarily used as a flame retardant in plastics, rubber, paints, paper, textiles, and electronics. It can also be used as a catalyst, a clarifying agent for glass, an opacifier for porcelain and enamel, and a white pigment for paint. 收起 | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...展開 Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展開 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| BurnEx™ 30-107 | Nyacol Nano Technology | BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coati...展開 BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coatings, and water-based systems. 收起 | |
| BurnEx™ A1582 | Nyacol Nano Technology | BurnEx™ A1582, a Nano-Dispersible Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in flexible vinyl and thermoplastic polyester. | |
| BurnEx™ ADP480 | Nyacol Nano Technology | BurnEx™ ADP480 a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Polyolefins, HIPS, and Adhesives | |
| BurnEx™ ADP494 | Nyacol Nano Technology | BurnEx™ ADP494, a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Solution-spun fibers, ABS, Epoxy-ketones. | |
| BurnEx Plus™ A1588LP | Nyacol Nano Technology | BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...展開 BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. 收起 | |
| BurnEx Plus™ A1590 | Nyacol Nano Technology | BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...展開 BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. 收起 | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...展開 BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. 收起 | |
| CF-APP203 Silane Modified APP | Shifang Changfeng Chemical Co., Ltd. | CF-APP203 Silane Modified APP is flame retardant based on phosphorus /nitrogen synergism. This product is has a lower solubility in water and viscosity. CF-APP203 Silane Modified APP is most commonly used in fiber, polymer, plastics, and fire-refractory b...展開 CF-APP203 Silane Modified APP is flame retardant based on phosphorus /nitrogen synergism. This product is has a lower solubility in water and viscosity. CF-APP203 Silane Modified APP is most commonly used in fiber, polymer, plastics, and fire-refractory building board applications. 收起 | |
| Chlorinated Paraffin 70# | Henan Harvest Chem Co., LTD. | Chlorinated Paraffin 70# is a white/pale yellow, solid powder. This product provides fire-retardant, chemical reagent resistant, antideteriorant and heat stabilization properties. Chlorinated Paraffin 70# is used in coating and printing ink applications. | |
| Decabromodiphenyl Oxide | ChemCeed | Decabromodiphenyl Oxide is used as a flame retardant for elastomers, wire & cable, textile coatings, electrical & electronic equipment, automotive parts, and construction materials. | |
| Decabromodiphenyl Oxide | Hainan Zhongxin Chemical Co., Ltd. | Decabromodiphenyl Oxide (DBDPO) is a white powder with an average particle size of 3µm and contains between 82-83% Br. It is primarily used as a broad spectrum flame retardant and is widely used in the production of rubber, textile, plastics and paint. De...展開 Decabromodiphenyl Oxide (DBDPO) is a white powder with an average particle size of 3µm and contains between 82-83% Br. It is primarily used as a broad spectrum flame retardant and is widely used in the production of rubber, textile, plastics and paint. Decabromodiphenyl Oxide is recommended for use in products containing polyethylene polypropylene, ABS resins, PBT resins, and rubber. 收起 | |
| Deflame® 4216 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Deflame® 4216是一種反應性烯烴、酮、環氧化物等。它作為防火劑用於紡織品中和電子部件例如PCB用環氧樹脂中。由於它的剛性結構，即側磷基團，該產品具有高玻璃化轉變溫度和熱穩定性。它的毒性較低，冒煙少。Deflame® 4216適合用於紡織品和電子部件用環氧樹脂。它具有白色片狀表觀 | |
| Deflame® 4325 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Deflame® 4325是一種磷化氫不含鹵素的防火劑，耐溶劑萃取，揮發和起霜。該白色到淺白色結晶粉末具有良好的穩定性和防火效率，適合環氧、聚酯、聚氨酯樹脂。Deflame® 4325作為防火劑廣泛用於半導體封裝材料，作為中間體用於合成反應性防火劑，高品質環氧樹脂例如PCB中取代TBBA，或用於半導體、PCB、LED等的膠黏劑 | |
| Deflame® 460A70 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Deflame® 460A70是一種不含鹵素的環氧樹脂，溶於丙酮，70%固含。它可用於複合材料，剛性板和多層電子層壓板。分子量分布設計以增加玻璃的浸水率並提高固化環氧樹脂的交聯密度。各種分子量片段和環氧樹脂也為該體系在層壓時提供了良好的流變性。固化後的產品具有良好的熱穩定性和耐化學品性 | |
| Diammonium phosphate（DAP） | Shifang Changfeng Chemical Co., Ltd. | Diammonium phosphate（DAP）is a white sand like fire retardant crystal. This product is easily soluble in water. Diammonium phosphate（DAP）is most commonly used as a fire-proof agent additive for wood, paper, fabric, used in manufacturing late making, medici...展開 Diammonium phosphate（DAP）is a white sand like fire retardant crystal. This product is easily soluble in water. Diammonium phosphate（DAP）is most commonly used as a fire-proof agent additive for wood, paper, fabric, used in manufacturing late making, medicine and radio tube, and also used in phosphorus applications. 收起 | |
| Disflamoll® TP | Rhein Chemie Rheinau GmbH | Disflamoll® TP is triphenyl phosphate (TPP) appearing as a white pellet. This low volatility flame retardant is commonly used in polymers and finds application in coatings based on nitrocellulose, phenolic resins, and ABS/PC and PPE/HIPS compounds. | |
| Disflamoll® TP Liquid | Rhein Chemie Rheinau GmbH | Disflamoll® TP is triphenyl phosphate (TPP) appearing as a liquid. This low volatility flame retardant is commonly used in polymers and finds application in coatings based on nitrocellulose, phenolic resins, and ABS/PC and PPE/HIPS compounds. | |
| DMMP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | DMMP Flame Retardant is dimethyl methyl phosphonate, a colorless to yellow, transparent liquid. This product has a specific gravity of 1.16 and a molecular weight of 124.08. This product provides flame retardant properties as a coating. | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展開 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展開 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展開 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展開 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展開 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展開 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展開 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展開 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展開 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展開 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| Epokukdo KB-560 | Kukdo Chemical Co., Ltd. | Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...展開 Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KB-562P | Kukdo Chemical Co., Ltd. | Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...展開 Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KB-563P | Kukdo Chemical Co., Ltd. | Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrica...展開 Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Exolit® AP 420 | Clariant Plastics & Coatings Ltd. | Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate. | |
| Exolit® AP 422 | Clariant Plastics & Coatings Ltd. | Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. | |
| Exolit® AP 423 | Clariant Plastics & Coatings Ltd. | Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and ...展開 Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. 收起 | |
| Exolit® AP 462 | Clariant Plastics & Coatings Ltd. | Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-parti...展開 Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. 收起 | |
| Exolit® AP 740 | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlor...展開 Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 收起 | |
| Exolit® AP 740 F | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from c...展開 Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 收起 | |
| Exolit® AP 750 | Clariant Plastics & Coatings Ltd. | Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability....展開 Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. 收起 | |
| Exolit® IFR 36 | Clariant Plastics & Coatings Ltd. | Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants...展開 Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access. 收起 | |
| FR-245 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine | Hainan Zhongxin Chemical Co., Ltd. | FR-245 is 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine, synonymous with Tris(Tribromophenoxy)-S-Triazine and Tris(Tribromophenyl)Cyanurate and 2,4,6-Tris-(2,4,6-Tribromophenoxy)-1,3,5-Triazine, is a flame retardant additive used in the production of ...展開 FR-245 is 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine, synonymous with Tris(Tribromophenoxy)-S-Triazine and Tris(Tribromophenyl)Cyanurate and 2,4,6-Tris-(2,4,6-Tribromophenoxy)-1,3,5-Triazine, is a flame retardant additive used in the production of paints and plastics. FR-245 is recommend for use in multiple products including: ABS, HIPS, PS, PBT, PP, GF+ABS, GF+PS, GF+PBT, GF+HIPS and GF+PP. 收起 | |
| GD-APP101 Crystalline Ⅱ | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP101 Crystalline Ⅱ is a white free-flowing powder ammonium polyphosphate. This product is largely insoluble in water and completely insoluble in organic solvent. GD-APP101 Crystalline Ⅱ is applied in solvent based intumescent coatings, water based ...展開 GD-APP101 Crystalline Ⅱ is a white free-flowing powder ammonium polyphosphate. This product is largely insoluble in water and completely insoluble in organic solvent. GD-APP101 Crystalline Ⅱ is applied in solvent based intumescent coatings, water based intumescent coatings, flame retardant for flexible and rigid urethane foams, and as a flame retardant for epoxies. 收起 | |
| GD-APP102 | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP102 is a white free-flowing powder based on ammonium polyphosphate. This product has very low water solubility and a high phosphorus content. GD-APP102 is applied in intumescent coating and materials containing cellulose. | |
| GD-APP103 | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP103 is a white free-flowing powder based on ammonium polyphosphate. This product will reduce water solubility, air hygroscopicity, viscosity in water, and increase fluidity of powder. GD-APP103 is applied in various types of coatings, epoxy resins...展開 GD-APP103 is a white free-flowing powder based on ammonium polyphosphate. This product will reduce water solubility, air hygroscopicity, viscosity in water, and increase fluidity of powder. GD-APP103 is applied in various types of coatings, epoxy resins, and unsaturated resins. 收起 | |
| GD-APP104 | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP104 is a white free-flowing powder non-halogenated flame retardant based on GD-APP101, which develops its effectiveness through phosphorous/nitrogen synergism. This product is mostly used in a large range of thermoplastics, rubbers, and resins. | |
| Hexabromocyclododecane | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings. | |
| Isopropylated Triphenyl Phosphate (IPPP) | Hainan Zhongxin Chemical Co., Ltd. | Isopropylated Triphenyl Phosphate (IPPP) synonymous with Isopropylated phenol phosphate and triisopropylated phenyl phosphate, is a white to yellow transparent liquid used as a flame retardant additive for paints and plastics. It is recommended for use in...展開 Isopropylated Triphenyl Phosphate (IPPP) synonymous with Isopropylated phenol phosphate and triisopropylated phenyl phosphate, is a white to yellow transparent liquid used as a flame retardant additive for paints and plastics. It is recommended for use in PVC, fiber resin, synthetic rubber, pressure oil fields. 收起 | |
| JLS-APP | ChemFine International Co., Ltd. | JLS-APP, also known as ammonium polyphosphate, is used in intumescent flame retardant coating, as well as polyurethane foam and cellulose. | |
| Melafine® | OCI MELAMINE | Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consist...展開 Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consistent formation and expansion of a rigid carbon matrix that protects the substrate from further heat and damage. 收起 | |
| Melamine Cyanurate (MCA) | Hainan Zhongxin Chemical Co., Ltd. | Melamine Cyanurate (MCA) is a white powder that is 99.5% pure. It is primarily used as a flame retardant additive in paints and plastic. Melamine Cyanurate is recommend for use in multiple products including: nylon-66, rubbers, synthetic resins (poly viny...展開 Melamine Cyanurate (MCA) is a white powder that is 99.5% pure. It is primarily used as a flame retardant additive in paints and plastic. Melamine Cyanurate is recommend for use in multiple products including: nylon-66, rubbers, synthetic resins (poly vinyl chloride, polystyrene, polyamide, polyoxymethymens ) and acrylic acid emulsion etc. 收起 | |
| Melamine Modified APP-II (CF-APP202) | Shifang Changfeng Chemical Co., Ltd. | Melamine Modified APP-II (CF-APP202) is a flame retardant. This product is based on phosphorus /nitrogen synergism, free formaldehyde,manufactured from CF-APP201. Melamine Modified APP-II (CF-APP202) is most commonly used in plastics(PP, PVC, and PE), pol...展開 Melamine Modified APP-II (CF-APP202) is a flame retardant. This product is based on phosphorus /nitrogen synergism, free formaldehyde,manufactured from CF-APP201. Melamine Modified APP-II (CF-APP202) is most commonly used in plastics(PP, PVC, and PE), polyester, rubber, and expandable fireproof coating applications. 收起 | |
| MelaminebyOCI™ GPH | OCI MELAMINE | MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...展開 MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 收起 | |
| MelaminebyOCI™ GPH-LD | OCI MELAMINE | MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...展開 MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. 收起 | |
| MelaminebyOCI™ SLP | OCI MELAMINE | MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...展開 MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 收起 | |
| Mileflame FR 20-25 | MPI Chemie B.V. | Mileflame FR 20-25 is potassium perfluorobutane sulfonate in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame FR 5060 | MPI Chemie B.V. | Mileflame FR 5060 is a white crystal powder used as a non-halogenated flame retardant in coating applications. | |
| Mileflame HPCTP | MPI Chemie B.V. | Mileflame HPCTP is hexaphenoxycyclotriphosphazene in the form of a white crystal powder / flakes. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 1000 | MPI Chemie B.V. | Mileflame NP 1000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. Inorganic fillers, such as glass fiber, calcium carbonate and barium sulphate, will affect the fl...展開 Mileflame NP 1000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. Inorganic fillers, such as glass fiber, calcium carbonate and barium sulphate, will affect the flame retardancy of this product. 收起 | |
| Mileflame NP 2000 | MPI Chemie B.V. | Mileflame NP 2000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 3000 | MPI Chemie B.V. | Mileflame NP 3000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 4000 | MPI Chemie B.V. | Mileflame NP 4000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame S-1000 | MPI Chemie B.V. | Mileflame S-1000 is a mixture of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame S-2000 | MPI Chemie B.V. | Mileflame S-1000 is a mixture of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Monoammonium phosphate (MAP) | Shifang Changfeng Chemical Co., Ltd. | Monoammonium phosphate (MAP) is a white sand like fire retardant crystal. This product is stable in the air and free soluble in water. Monoammonium phosphate (MAP) is most commonly used in wood, paper, and fabric fire proofing applications. | |
| Nyacol® A1530 | Nyacol Nano Technology | Nyacol® A1530 is a water-based dispersion of 30nm particle antimony at 29% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1540N | Nyacol Nano Technology | Nyacol® A1540N is a water-based dispersion of 30nm particle antimony at 38% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550 | Nyacol Nano Technology | Nyacol® A1550 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 5. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyagraph ® 249 | Nyacol Nano Technology | Nyagraph® 249 is a natural material based on the processing of graphite ore. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 200 | Nyacol Nano Technology | Nyagraph® 200 is a natural material based on the processing of graphite ore with a fine particle size of 80%>180 microns. This product is an intumescent flame retardant used in sealants, adhesives, and coatings and has applications in soft ash, plastic. | |
| Nyagraph® 250 | Nyacol Nano Technology | Nyagraph® 250 is a natural material based on the processing of graphite ore with an expansion volume of >250cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 251 | Nyacol Nano Technology | Nyagraph® 251 is a natural material based on the processing of graphite ore with a minimum of 250ml/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 35 | Nyacol Nano Technology | Nyagraph® 35 is a natural material based on the processing of graphite ore with an expansion volume of ≥35cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 351 | Nyacol Nano Technology | Nyagraph® 351 is a natural material based on the processing of graphite ore with an expansion volume of 330-350cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® FP | Nyacol Nano Technology | Nyagraph® FP is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® KP251 | Nyacol Nano Technology | Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatin...展開 Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. 收起 | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展開 Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展開 Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| P-Toluene Sulfonamide (OPTSA) | Hainan Zhongxin Chemical Co., Ltd. | P-Toluene Sulfonamide (OPTSA) is a white crystalline powder that is 99.5% pure. It is primarily used as a flame retardant additive for paints, inks and plastics. P-Toluene Sulfonamide (OPTSA) can be use as a plasticizer in the production of fluorescent, p...展開 P-Toluene Sulfonamide (OPTSA) is a white crystalline powder that is 99.5% pure. It is primarily used as a flame retardant additive for paints, inks and plastics. P-Toluene Sulfonamide (OPTSA) can be use as a plasticizer in the production of fluorescent, phenolic and polyamide resins. 收起 | |
| P-Toluene Sulfonyl Chloride (OPTSC) | Hainan Zhongxin Chemical Co., Ltd. | P-Toluene Sulfonyl Chloride (OPTSC) is a white crystalline powder that is 99% pure. It is mainly used as an analytical reagent and can be used as a flame retardant additive in paints and plastic. In addition, P-Toluene Sulfonyl Chloride (OPTSC) can also b...展開 P-Toluene Sulfonyl Chloride (OPTSC) is a white crystalline powder that is 99% pure. It is mainly used as an analytical reagent and can be used as a flame retardant additive in paints and plastic. In addition, P-Toluene Sulfonyl Chloride (OPTSC) can also be used in synthesizing organics, hormones, and various dyes. 收起 | |
| Phos-Chek® P/42 | ICL Phosphate Specialty | Phos-Chek® P/42 is a white powder, free of visible foreign matter used as a fire retardant additive. It is composed of Ammonium polyphosphate (APP) CAS NO. 68333-79-9. Phos-Chek® is an effective fire retardant additive for applications such as: intumescent...展開 Phos-Chek® P/42 is a white powder, free of visible foreign matter used as a fire retardant additive. It is composed of Ammonium polyphosphate (APP) CAS NO. 68333-79-9. Phos-Chek® is an effective fire retardant additive for applications such as: intumescent paints and coatings, both water-based and solvent-based. It can also be applied to intumescent mastics, caulks, putties, sealants, epoxies, films and adhesives, as well as polymer systems, including those based on polyethylene, polypropylene, polyurethane, rubber, acrylics and polyterephthalates. Building materials such as wall coverings, ceiling tiles, roofing products, wall panels, wood chip board and composites can also be used with the application of Phos-Chek® P/42. 收起 | Request Sample |
| Poly(2,6-dibromophenylene oxide) (PBO) | Hainan Zhongxin Chemical Co., Ltd. | Poly(2,6-dibromophenylene oxide) (PBO) is a light brown powder that contains a minimum of 62% BR. It is primarily used as a flame retardant additive in paints and plastic. Poly(2,6-dibromophenylene oxide) (PBO) has excellent thermal stability with good co...展開 Poly(2,6-dibromophenylene oxide) (PBO) is a light brown powder that contains a minimum of 62% BR. It is primarily used as a flame retardant additive in paints and plastic. Poly(2,6-dibromophenylene oxide) (PBO) has excellent thermal stability with good compatibility with many types of plastic. 收起 | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...展開 R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. 收起 | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...展開 R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. 收起 | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...展開 Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...展開 Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TARGON® G3 | ICL Phosphate Specialty | TARGON® G3 is a secondary retarder which works in combination with citric or tartaric acid depending on the pH of the formulation. In formulations with an alkaline pH value, G3 works with tartaric acid. In formulations with a neutral pH, G3 works with cit...展開 TARGON® G3 is a secondary retarder which works in combination with citric or tartaric acid depending on the pH of the formulation. In formulations with an alkaline pH value, G3 works with tartaric acid. In formulations with a neutral pH, G3 works with citric acid. TARGON® G3 helps to achieve constant setting, prolong working time, and improve the finish treating qualities. 收起 | Request Sample |
| TCEP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardan...展開 TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardant properties as a nitrocellulose varnish additive due to its plasticization. 收起 | |
| TCPP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in c...展開 TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in coatings. 收起 | |
| Tetrabromobisphenol A Bis-(2,3-Dibromopropyl Ether) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromobisphenol A bis-(2,3-dibromopropyl ether), Synonymous with BDDP:2,2-Bis[4-(2,3-Dibromopropoxy)-3,5-Dibromophenyl]Propane, is a white powder that has a minimum Br content of 67%. It is primarily used as a flame retardant in paints and plastics. T...展開 Tetrabromobisphenol A bis-(2,3-dibromopropyl ether), Synonymous with BDDP:2,2-Bis[4-(2,3-Dibromopropoxy)-3,5-Dibromophenyl]Propane, is a white powder that has a minimum Br content of 67%. It is primarily used as a flame retardant in paints and plastics. Tetrabromobisphenol A bis-(2,3-dibromopropyl ether) can also be used as an additive in EPS, PS, SAN, PO and PP. 收起 | |
| Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) is a white powder that has a minimum of 64% Br. It is primarily used as a flame retardant additive in paints and plastic with it has better stability than BDDP. It is recommended for use in PP, PE, PS, A...展開 Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) is a white powder that has a minimum of 64% Br. It is primarily used as a flame retardant additive in paints and plastic with it has better stability than BDDP. It is recommended for use in PP, PE, PS, ABS resin and rubber. 收起 | |
| Tetrabromophthalic Anhydride (TBPA) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromophthalic Anhydride (TBPA) is a white or light yellow powder with a minimum of 67% BR. It is primarily used as a flame retardant additive and has a high bromine content. It is used in the production of elastomers, wire & cable, textile coatings,...展開 Tetrabromophthalic Anhydride (TBPA) is a white or light yellow powder with a minimum of 67% BR. It is primarily used as a flame retardant additive and has a high bromine content. It is used in the production of elastomers, wire & cable, textile coatings, business machines and television cabinets and is particularly effective in polyolefins, styrenic, polyamide, HIPS and polyester resins. 收起 | |
| Tetrachlorophthalic Anhydride (TCPA) | Hainan Zhongxin Chemical Co., Ltd. | Tetrachlorophthalic Anhydride (TCPA) is a white crystalline powder that is 99% pure. It is primarily used as a flame retardant additive. Tetrachlorophthalic Anhydride (TCPA) can also be used as a phthalocyanine for use in the production of green pigments ...展開 Tetrachlorophthalic Anhydride (TCPA) is a white crystalline powder that is 99% pure. It is primarily used as a flame retardant additive. Tetrachlorophthalic Anhydride (TCPA) can also be used as a phthalocyanine for use in the production of green pigments and dye intermediates. 收起 | |
| Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) | Hainan Zhongxin Chemical Co., Ltd. | Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is a clear straw colored liquid that is between 75-77% pure. It is primarily used as a flame retardant additive and can also be used as a fungicide. Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is rec...展開 Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is a clear straw colored liquid that is between 75-77% pure. It is primarily used as a flame retardant additive and can also be used as a fungicide. Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is recommended for use in cotton, leather, and polyester products. 收起 | |
| Tri(2-Chloroisopropyl) Phosphate (TCPP) | Hainan Zhongxin Chemical Co., Ltd. | Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins a...展開 Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins and is recommended for use in the production of PU foams, PVC and adhesives. 收起 |
