| APG® 325 UP | BASF |
|
用於家居、工業公共設施領域的清潔產品的性能的提升，賦予產品優異的清潔及穩定性。
Compliance Highlights Available
|
|
| Arlypon® VPC | BASF |
脂肪醇聚氧乙烯醚及烷基胺聚氧乙烯醚的混合物。在 25°C時為澄清液體。可以用於鹽酸、磷酸、檸檬酸、氨基磺酸等溶液的增稠。
Compliance Highlights Unavailable
|
||
| Degressal® SD 20 | BASF |
Degressal® SD 20 is a fatty alcohol alkoxylate with approximately 100% active content. It is very suitable for silicon-free foam suppressors for Home Care detergents and I&I cleaning. This product is supplied as a clear, yellowish liquid.
Compliance Highlights Unavailable
|
||
| Degressal® SD 40 | BASF |
Degressal® SD 40 is a phosphoric ester with approximately 100% active content. It is very suitable for silicon-free foam suppressors for Home Care detergents and I&I cleaning. This product is supplied as a clear, colourless, or yellowish liquid.
Compliance Highlights Unavailable
|
||
| Dehydem® Supra | BASF |
Dehydem® Supra is an alkyl polyalkylene glycol ether with approximately 90% active content. It is your professional partner for a multitude of I&I cleaning tasks. This product provides smart and effective foam control even at low temperatures while provid...展開
Dehydem® Supra is an alkyl polyalkylene glycol ether with approximately 90% active content. It is your professional partner for a multitude of I&I cleaning tasks. This product provides smart and effective foam control even at low temperatures while providing visible cleaning benefits. Because it is easy to formulate in water-based solutions, Dehydem® Supra provides versatility for a wide range of formulations. 收起
Compliance Highlights Unavailable
|
||
| Dehydol® LT 7 | BASF |
用於制備羊毛織物洗液及輕垢型清潔劑的脂肪醇。
Compliance Highlights Available
|
||
| Dehydol® LT 8 | BASF |
C12-C18脂肪醇聚氧乙烯(8)醚
Compliance Highlights Available
|
||
| Dehypon® 2555 | BASF |
具有極佳消泡性的表活劑的混合物，在絡合物，如葡萄糖酸鹽的存在下可以溶於50％的氫氧化鈉溶液。
Compliance Highlights Unavailable
|
||
| Dehypon® 2574 | BASF |
具有極佳抑泡性能的非離子表活劑，用於金屬處理的噴射型及浸漬型配方。
Compliance Highlights Unavailable
|
||
| Dehypon® E 124-90 | BASF |
具有極佳低發泡性及優異潤濕性的非離子表活劑，主要用於工業及家居的催干劑。
Compliance Highlights Unavailable
|
||
| Dehypon® E 127 | BASF |
改性脂肪醇聚乙二醇醚。
Compliance Highlights Unavailable
|
||
| Dehypon® G 2084 | BASF |
用於各種工業領域的低發泡性表活劑。
Compliance Highlights Available
|
||
| Dehypon® GRA | BASF |
DEHYPON® GRA是具有優異潤濕性能的粒狀、低泡型表活劑。用於自動洗碗機用結合清洗、漂洗及含鹽分的多功能洗滌粉或洗滌片產品的漂洗助劑。
Compliance Highlights Unavailable
|
||
| Dehypon® GRA | BASF |
具有優異潤濕性能的低發泡型表活劑顆粒，主要用於生產多功能的自動餐具洗滌粉及片劑中的漂洗助劑。
Compliance Highlights Unavailable
|
||
| Dehypon® KE 3447 | BASF |
具有極佳低發泡性及優異潤濕性的非離子表活劑，用於提升對硬表面的潤濕能力，同時也可用於清潔劑產品中。
Compliance Highlights Unavailable
|
||
| Dehypon® LS 104 | BASF |
極佳潤濕能力的低泡性表活劑。在酸性及腐蝕性溶液中有極佳的穩定性，與各種陰離子、陽離子及非離子表活劑混溶。
Compliance Highlights Available
|
||
| Dehypon® LS 104 L | BASF |
潤濕力更優異的低發泡性表活劑，適用於酸性及中性的水洗型澄清配方的產品中。
Compliance Highlights Available
|
||
| Dehypon® LS 24 | BASF |
低發泡型EO/PO共聚脂肪醇，適用於低發泡需求的清潔去污劑。
Compliance Highlights Available
|
||
| Dehypon® LS 36 | BASF |
低發泡型EO/PO共聚脂肪醇，適用於低發泡需求的清潔去污劑。
Compliance Highlights Available
|
||
| Dehypon® LS 45 CC | BASF |
在酸鹼性環境中充分穩定的低泡性非離子表活劑，用於碳酸鹽、硅酸鹽及磷酸鹽等鹼性體系﹔磷酸、檸檬酸等酸性體系。
Compliance Highlights Available
|
||
| Dehypon® LS 531 | BASF |
用於家居及工業公共設施的清洗劑的低泡性清潔劑，具有極佳的消泡能力及優異的潤濕能力。
Compliance Highlights Available
|
||
| Dehypon® LS 54 | BASF |
低發泡型EO/PO共聚脂肪醇
Compliance Highlights Available
|
||
| Dehypon® LST 254 | BASF |
低發泡性的非離子表活劑，可以抑制泡沫的產生，尤為適用於瓶類首次清洗的產品中。
Compliance Highlights Unavailable
|
||
| Dehypon® LT 054 | BASF |
適用於基於苛性鈉的粉狀配方的非離子、低發泡型表活劑。
Compliance Highlights Available
|
||
| Dehypon® LT 104 | BASF |
具有優異潤濕能力的低泡性表活劑，可用於低泡性的工業清潔劑、機用餐具洗滌劑及配方中含有氫氧化鈉或磷酸的這種傳統脂肪醇聚氧乙烯醚表活劑在儲存過程中不夠穩定這樣的體系中。
Compliance Highlights Available
|
||
| Dehypon® LT 104 L | BASF |
潤濕力更優異的低發泡性表活劑。
Compliance Highlights Available
|
||
| Dehypon® O 054 | BASF |
改性脂肪醇聚乙二醇醚。
Compliance Highlights Available
|
||
| Dehypon® OCP 502 | BASF |
用於鹼性洗液制備的極為理想的消泡劑。
Compliance Highlights Available
|
||
| Dehypon® WET | BASF |
用於家居及公共設施硬表面清潔的低泡型表活劑。
Compliance Highlights Unavailable
|
||
| Dehypound® VTS | BASF |
Dehypound® VTS is a silicone-replacement technology designed for Car Care applications. It is listed on EPA’s Safer Chemical Ingredients List, and is also suitable for Direct Release applications. Compared with silicones, it provides comparable tire shine...展開
Dehypound® VTS is a silicone-replacement technology designed for Car Care applications. It is listed on EPA’s Safer Chemical Ingredients List, and is also suitable for Direct Release applications. Compared with silicones, it provides comparable tire shine, better streak-free cleaning performance in rinse-aids, and better cleaning performance in interior-cleaning applications. 收起
Compliance Highlights Unavailable
|
||
| Dehypound® W 07 | BASF |
用以預濕潤濕巾制備的濃縮液，可清潔任何的硬表面。
Compliance Highlights Unavailable
|
||
| Dehyquart® AU-46 | BASF |
用於織物柔軟劑原料的季銨鹽化合物。
Compliance Highlights Available
|
||
| Dehyquart® CSP | BASF |
用於汽車護理的特殊陽離子表活劑。
Compliance Highlights Unavailable
|
||
| Demelan® 1990 | BASF |
用於發泡性粘稠漂白劑添加劑的表活劑的混合物，賦予產品清潔及發泡性能。
Compliance Highlights Unavailable
|
||
| Demelan® AU 39 BIO | BASF |
具有優異脫脂性能的陽離子表活劑，極易生物降解。
Compliance Highlights Unavailable
|
||
| Demelan® CS-30 - Ready to Use Coconut Soap | BASF |
|
極低色澤的透明液體。在配方中穩定性好，成品儲存后無需黃化處理。沒有氣味，與各種香精有著良好的配伍性。可作為重垢和液體輕垢洗滌劑的添加劑和粘性泡沫增白劑。
Compliance Highlights Unavailable
|
|
| Deriphat® 160 C | BASF |
用於清潔產品的兩性表面活性劑。在硬水和軟水中都顯示了良好的發泡性能。
Compliance Highlights Available
|
||
| Euperlan® Eco | BASF |
Euperlan® Eco is a 43% biobased† and moderately biodegradable* opacifier. It is a starch polymer with styrene and methacrylic acid. It is a milky, low viscous dispersion at room temperature.
Compliance Highlights Unavailable
|
||
| Euperlan® HCO | BASF |
超級方便的乳濁劑，苯乙烯/丙烯酸共聚物及非離子表活劑的分散液，不含防腐劑。
Compliance Highlights Unavailable
|
||
| Glucopon® 215 UP | BASF |
|
在腐蝕性劑及鹽溶液中具有優異的穩定性及溶解性。在鹽溶液、鹼液及高濃度表活體系中具有優異的增稠能力。
Compliance Highlights Available
|
|
| Glucopon® 225 DK | BASF |
|
賦予各種清潔類產品優異的硬表面清潔性能及制造工藝簡潔的非離子表活劑。具有極佳的潤濕性、分散性及降低表面張力，從而賦予產品更強的祛污力及乳化能力。
Compliance Highlights Available
|
|
| Glucopon® 425 N/HH | BASF |
賦予表面清潔產品潤濕、滲透及清潔性能的水溶液。
Compliance Highlights Available
|
||
| Glucopon® 50 G | BASF |
顆粒狀的烷基葡糖苷，用於清潔產品。
Compliance Highlights Unavailable
|
||
| Glucopon® 600 CSUP | BASF |
|
具有極佳潤濕、清潔、去污性能的水分散液。適用於餐具洗滌劑、衣物洗滌劑及各種清潔產品配方。
Compliance Highlights Available
|
|
| Glucopon® 650 EC | BASF |
|
極佳餐具洗滌及清潔性能的水溶液。
Compliance Highlights Available
|
|
| Lutensol® TO 10 | BASF |
Lutensol® TO 10 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展開
Lutensol® TO 10 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 10 is a soft, slightly yellowish paste. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 109 | BASF |
Lutensol® TO 109 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...展開
Lutensol® TO 109 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 109 is a clear liquid at 23°C. It consists of approx. 85% Lutensol® TO 10 and approx. 15% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 12 | BASF |
Lutensol® TO 12 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展開
Lutensol® TO 12 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 12 is a soft, slightly yellowish paste. 收起
Compliance Highlights Available
|
||
| Lutensol® TO 129 | BASF |
Lutensol® TO 129 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...展開
Lutensol® TO 129 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 129 is a clear liquid at 23°C. It consists of approx. 85% Lutensol® TO 12 and approx. 15% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 15 | BASF |
Lutensol® TO 15 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展開
Lutensol® TO 15 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 15 is a soft, slightly yellowish paste. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 2 | BASF |
Lutensol® TO 2 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展開
Lutensol® TO 2 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 2 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 20 | BASF |
Lutensol® TO 20 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展開
Lutensol® TO 20 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 20 is a soft, slightly yellowish paste. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 3 | BASF |
Lutensol® TO 3 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展開
Lutensol® TO 3 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 3 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 389 | BASF |
Lutensol® TO 389 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...展開
Lutensol® TO 389 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 389 is a clear liquid at 23°C. It is a special mixture of Lutensol® TO 3 and Lutensol® TO 8 with an active content of approx. 90% and approx. 10% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 5 | BASF |
Lutensol® TO 5 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展開
Lutensol® TO 5 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 5 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 6 | BASF |
Lutensol® TO 6 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展開
Lutensol® TO 6 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 6 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 65 | BASF |
Lutensol® TO 65 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展開
Lutensol® TO 65 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 65 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 7 | BASF |
Lutensol® TO 7 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展開
Lutensol® TO 7 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 7 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 79 | BASF |
Lutensol® TO 79 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展開
Lutensol® TO 79 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 79 is a clear liquid at 23°C. It consists of approx. 90% Lutensol® TO 7 and approx. 10% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 8 | BASF |
Lutensol® TO 8 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展開
Lutensol® TO 8 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 8 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 89 | BASF |
Lutensol® TO 89 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展開
Lutensol® TO 89 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 89 is a clear liquid at 23°C. It consists of approx. 90% Lutensol® TO 8 and approx. 10% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 100 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 100 is...展開
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 100 is a soft, colourless or slightly yellowish paste at 23°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 140 | BASF |
Lutensol® XL 140 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 140 is...展開
Lutensol® XL 140 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 140 is a soft, colourless or slightly yellowish paste at 23°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 40 | BASF |
Lutensol® XL 40 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 40 is a...展開
Lutensol® XL 40 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 40 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 50 | BASF |
Lutensol® XL 50 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 50 is a...展開
Lutensol® XL 50 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 50 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 60 | BASF |
Lutensol® XL 60 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 60 is a...展開
Lutensol® XL 60 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 60 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 70 | BASF |
Lutensol® XL 70 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 70 is a...展開
Lutensol® XL 70 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 70 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 79 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 79 is ...展開
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 79 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 80 | BASF |
Lutensol® XL 80 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 80 is a...展開
Lutensol® XL 80 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 80 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 89 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 89 is ...展開
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 89 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 90 | BASF |
Lutensol® XL 90 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 90 is a...展開
Lutensol® XL 90 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 90 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 100 | BASF |
Lutensol® XP 100 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The nu...展開
Lutensol® XP 100 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 100 is a soft, colourless or slightly yellowish paste at 23°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 140 | BASF |
Lutensol® XP 140 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The nu...展開
Lutensol® XP 140 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 140 is a soft, colourless or slightly yellowish paste at 23°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 30 | BASF |
Lutensol® XP 30 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 30 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 30 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 40 | BASF |
Lutensol® XP 40 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 40 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 40 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 50 | BASF |
Lutensol® XP 50 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 50 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 50 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 60 | BASF |
Lutensol® XP 60 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 60 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 60 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 69 | BASF |
Lutensol® XP 69 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 69 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 69 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 70 | BASF |
Lutensol® XP 70 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 70 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 70 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 79 | BASF |
Lutensol® XP 79 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 79 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 79 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 80 | BASF |
Lutensol® XP 80 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 80 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 80 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 89 | BASF |
Lutensol® XP 89 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 89 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 89 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 90 | BASF |
Lutensol® XP 90 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 90 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 90 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 99 | BASF |
Lutensol® XP 99 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展開
Lutensol® XP 99 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 99 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutropur® MSA | BASF |
Lutropur® MSA is high purity methanesulfonic acid 70% (in water). It provides fast and powerful cleaning, even against greasy soils. It also removes lime scale, calcium deposits, and soap rests, as well as improves rust and grime removal. This product is ...展開
Lutropur® MSA is high purity methanesulfonic acid 70% (in water). It provides fast and powerful cleaning, even against greasy soils. It also removes lime scale, calcium deposits, and soap rests, as well as improves rust and grime removal. This product is suitable for bathroom cleaners toilet bowl cleaners, shower cleaners, and rust removers. 收起
Compliance Highlights Unavailable
|
||
| Plurafac® LF 120 | BASF |
Plurafac® LF-120 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 60 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 1300 | BASF |
Plurafac® LF-1300 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 130 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 131 | BASF |
Plurafac® LF-131 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 40 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 132 | BASF |
Plurafac® LF-132 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 5 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 1430 | BASF |
Plurafac® LF-1430 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 450 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 220 | BASF |
Plurafac® LF-220 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 150 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 221 | BASF |
Plurafac® LF-221 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 100 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 223 | BASF |
Plurafac® LF-223 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 70 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 224 | BASF |
Plurafac® LF-224 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 55 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 231 | BASF |
Plurafac® LF-231 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 45 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 300 | BASF |
Plurafac® LF-300 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 75 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 301 | BASF |
Plurafac® LF-301 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 150 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 303 | BASF |
Plurafac® LF-303 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 350 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 305 | BASF |
Plurafac® LF-305 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 110 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 400 | BASF |
Plurafac® LF-400 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 70 mPa·s at 23°C.
Compliance Highlights Unavailable
|
