| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...展開 Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. 收起 | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...展開 Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. 收起 | |
| Baybond® PU 330 | Covestro (formerly Bayer MaterialScience) 科思创 | 陰離子，非離子聚酯型聚氨酯聚合物，在玻璃纖維浸潤劑中用作成膜組份 | |
| Baybond® PU 403 | Covestro (formerly Bayer MaterialScience) 科思创 | 陰離子，非離子聚酯型聚氨酯聚合物，在玻璃纖維浸潤劑中用作成膜組份 | |
| Baybond® PU 405 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125...展開 Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 32-35, a flow time at 23°C, (4mmcup) of 11-18, and a pH value 20°C (supply form) of 6.0-8.0. Baybond® PU 405 was developed for the sizing of glass fibres used to reinforce thermoplastics, particularly polyamide. Glass fibre sizes based on Baybond® PU 405 are characterised by their outstanding film-forming properties and very good adhesion. They have very good colourfastness, even at high temperatures. The mechanical film properties of the product are developed fully by post-crosslinking at temperatures from 170°C for a duration of 20 minutes. Baybond® PU 405 is also highly resistant to shear forces and hydrolysis. 收起 | |
| Baybond® PU 406 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a f...展開 Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a flow time at 23°C, (4mmcup) of 10-22, and a pH value at 20°C, (supply form) of 5.5-7.5. 收起 | |
| Baybond® PU 407 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, c...展開 Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 40 ± 1, a flow time at 23°C, (4mmcup) of 11 - 18, and has a pH value 20°C (supply form) of 6.3 - 7.7. Baybond® PU 407 is particularly well suited for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 407 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. It is also stable against shear forces. 收起 | |
| Bayhydrol® U 241 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free o...展開 Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free of approx. 2.5, a minimum film-forming temperature MFT of approx. 0, and a mean particle size of approx. 50. Bayhydrol® U 241 is a polyester-polyurethane dispersion neutralized with dimethyl ethanol amine which is resistant to hydrolysis. The product can be diluted with water for application and shows no dilution anomalies. Bayhydrol® U 241 can be combined with partially methylated melamine resins to formulate water-dilutable stoving coatings and primers which cure at approx. 120°C. 收起 | |
| Bayhydrol® U 355 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile...展開 Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile content (1g / 1h / 125°C) of 53-57, and a pH (10% in water) value of 7.0-7.5. Bayhydrol® U 355 can be combined with flexible polyurethane dispersions, e.g. Bayhydrol® UH 240 and UH 340/1, to formulate soft-feel and suede-effect coatings. This product's suitable polyisocyanate components are Bayhydur® 3100, Bayhydur® VP LS 2306 and Bayhydur® VP LS 2319. 收起 | |
| Bayhydrol® U XP 2755 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmen...展開 Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmented coatings. This product provides coatings with very good film transparency, high wood warmth, fast drying, high hardness, and long pot life. 收起 | |
| Bayhydrol® U XP 2766 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-p...展開 Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-polyurethan dispersion, that is solvent-free. This product has an acid number of approx. 11, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 4.0. Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethan dispersion which can be thinned with water to application viscosity. In combination with hydrophobic polyisocyanates (e.g. Desmodur® N 3600, N 3900 , XP 2730) and/or with hydrophilic polyisocyanates (e.g. Bayhydur 3100, 304, 305, XP 2487/1, XP 2655) high performance, hard-elastic two-component polurethane-hydrocoatings can be formulated. 收起 | |
| GENOMER* 4188/EHA | Rahn AG | 以EHA為溶劑的單官能聚氨酯丙烯酸酯。用於自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4188/M22 | Rahn AG | 以GENOMER 1122為溶劑的單官能聚氨酯丙烯酸酯。用於自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4205 | Rahn AG | 脂肪族聚氨酯甲基丙烯酸酯。用作自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4212 | Rahn AG | GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of f...展開 GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of finished formulations. 收起 | Request Sample |
| GENOMER* 4215 | Rahn AG | 脂肪族聚酯聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4215/M22 | Rahn AG | 以GENOMER1122為載體的脂肪族聚酯聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4217 | Rahn AG | 柔韌的芳香族氨基甲酸酯丙烯酸酯。作為可自由基固化的油墨，涂料和膠粘劑用樹脂。GENOMER 4217可推薦用於需要高附著力和柔韌性的應用場合。 | Request Sample |
| GENOMER* 4230 | Rahn AG | GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulat...展開 GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations. This product is recommended for use in the following applications: coatings for metal and plastic; printing inks; laminating adhesives; and peroxide curing. 收起 | Request Sample |
| GENOMER* 4247 | Rahn AG | GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low...展開 GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low viscosity, and medium-high reactivity. This product provides films with exceptional hardness and good mechanical properties. It is recommended for clear and pigmented coatings. 收起 | Request Sample |
| GENOMER* 4256 | Rahn AG | 脂肪族聚氨酯甲基丙烯酸酯。用作自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4259 | Rahn AG | GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components...展開 GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components. Cured alone, GENOMER* 4259 provides high hardness and modulus, excellent impact resistance and exceptional light stability for use in outdoor applications. It also combines good toughness and excellent optical clarity with high chemical resistance and excellent abrasion resistance. 收起 | Request Sample |
| GENOMER* 4267 | Rahn AG | 脂肪族聚氨酯丙烯酸酯，用於輻射固化油墨、涂料和膠粘劑。推薦用於既需要彈性又需要硬度的配方體系。 | Request Sample |
| GENOMER* 4269/M22 | Rahn AG | 以GENOMER1122為載體的脂肪族聚氨酯丙烯酸酯。用作自由基固化涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4277 | Rahn AG | GENOMER* 4277 is an aliphatic urethane acrylate. It is a resin for radically coatings. It provides high flexibility and toughness, good adhesion, and high viscosity. | Request Sample |
| GENOMER* 4281 | Rahn AG | GENOMER* 4281 is a medium viscosity, bio-based urethane acrylate resin for radically curable inks, coatings, adhesives, and 3D printing. Exhibiting low colour and an excellent combination of hardness and flexibility. | Request Sample |
| GENOMER* 4297 | Rahn AG | 脂肪族聚氨酯二甲基丙烯酸酯。用作自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4302 | Rahn AG | 脂肪族聚酯三聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4312 | Rahn AG | 脂肪族聚酯聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4312TF | Rahn AG | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...展開 GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. 收起 | Request Sample |
| GENOMER* 4316 | Rahn AG | 脂肪族聚酯聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4335 | Rahn AG | GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be...展開 GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be used for automotive coatings, industrial coatings, and outdoor applications. 收起 | Request Sample |
| GENOMER* 4337 | Rahn AG | GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overpr...展開 GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overprint varnishes. 收起 | Request Sample |
| GENOMER* 4425 | Rahn AG | 低粘度，脂肪族氨基甲酸酯丙烯酸酯。作為可自由基固化的油墨，涂料和膠粘劑用樹脂。GENOMER 4425可推薦用於需要高附著力，低黃變，高戶外耐候性和低粘度的應用場合 | Request Sample |
| GENOMER* 4514 | Rahn AG | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...展開 GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. 收起 | Request Sample |
| GENOMER* 4515 | Rahn AG | GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printin...展開 GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printing. GENOMER* 4515 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. 收起 | Request Sample |
| GENOMER* 4590/PP | Rahn AG | 以GENOMER 1456 (PPTTA)為載體的聚氨酯丙烯酸酯。用於自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4622 | Rahn AG | 芳香族聚氨酯丙烯酸酯。用於自由基固化油墨、涂料和粘膠的樹脂。 | Request Sample |
| GENOMER* 4690 | Rahn AG | GENOMER* 4690 为六官能度脂肪族聚氨酯丙烯酸酯。用于辐射固化油墨、涂料和胶粘剂。 特别适合于要求具有非常好的硬度、抗挂擦性、抗化学试剂性以及低黄变性的配方体系。 | Request Sample |
| GENOMER* 4691 | Rahn AG | GENOMER* 4691 is an aliphatic urethane hexaacrylate. GENOMER* 4691 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMPRANIL® DAH | Covestro (formerly Bayer MaterialScience) 科思创 | An anionic, aromatic polyether-polyurethane dispersion used as a flexible tie coat applied by the transfer coating process in the manufacture of materials for outerwear, bags/luggage, shoes and athletic shoes. | |
| Impranil® DL 1380 | Covestro (formerly Bayer MaterialScience) 科思创 | 陰離子脂肪族聚酯-聚氨酯乳液。適合用於配制織物塗料用於各種應用。特殊性能包括高柔韌性、良好的耐光性、高固體份、柔軟觸感，並適用於機械發泡 | |
| Impranil® DL 1537 | Covestro (formerly Bayer MaterialScience) 科思创 | 陰離子脂肪族聚酯-聚氨酯乳液。適合用於配制織物塗料用於各種應用。特殊性能包括非常好的耐水解性、良好的附著力、高固體份、良好的攪拌穩定性、柔軟觸感，並適用於機械發泡 | |
| Impranil® DLN-SD | Covestro (formerly Bayer MaterialScience) 科思创 | 陰離子脂肪族聚酯-聚氨酯乳液，適合用於配制織物塗料用於各種應用。特殊的性能包括高柔韌性、良好的耐光性，並適合用於機械發泡 |
