| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...veja mais PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. veja menos | |
| PAT-ADD DA 603 | Patcham USA | PAT-ADD DA 603 is a polymeric wetting and dispersing additive for waterborne pigment dispersions, architectural, industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon blacks. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic...veja mais PAT-ADD DA 603 is a polymeric wetting and dispersing additive for waterborne pigment dispersions, architectural, industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon blacks. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic organic pigments, enables high pigment loadings, at lowest viscosity, APEO free, optimizes color development, and strong contribution to electrostatic pigment stabilization, as well as steric stabilization; minimizing tendency for flocculation in the liquid stage as well as during application and film formation of waterborne formulations. veja menos | |
| HDK® N20 | Wacker Chemical Corporation | Synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. | Request Sample |
| HDK® N20D | Wacker Chemical Corporation | Synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. | Request Sample |
| PAT-ADD DA 603 LV | Patcham USA | PAT-ADD DA 603 LV is a low VOC, polymeric, APEO free wetting and dispersing additive for waterborne pigment dispersions, architectural and industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon black. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic...veja mais PAT-ADD DA 603 LV is a low VOC, polymeric, APEO free wetting and dispersing additive for waterborne pigment dispersions, architectural and industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon black. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic organic pigments, enables high pigment loadings, at lowest viscosity, APEO free, low VOC, optimizes color development, and strong contribution to electrostatic pigment stabilization, as well as steric stabilization; minimizing tendency for flocculation in the liquid stage as well as during application and film formation of waterborne formulations. veja menos | |
| KOMERATE D038 | Green Chemical Co., Ltd. | KOMERATE D038 is triethylene glycol diacrylate. It is difunctional, hydrophilic in nature, and offer low volatillity. | |
| Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
| AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
| SR542 | Sartomer Americas | SR542 is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance. | |
| Lithol Red R (3144W) | Ggink International Limited | Lithol Red R (3144W) is a hydrophilic barium, pigment with a Color Index number of 15630:1 (PR 49:1). Lithol Red R (3144W) is used in water based ink applications. | |
| KOMERATE D048 | Green Chemical Co., Ltd. | KOMERATE D048 is a tetraethylene glycol diacrylate. It is a hydrophilic difunctional acrylic monomer.It offers low viscosity, low volatility and good adhesion. | |
| BECKOPOX™ EH 2162w/75WA | Allnex | BECKOPOX™ EH 2162w/75WA is an aliphatic polyamine adduct. It's also a hardener for water-reducible coatings on mineral and metallic substrates. | Request Sample |
| KOMERATE D048M | Green Chemical Co., Ltd. | KOMERATE D048M is a triethylene glycol dimethacrylate. It is a hydrophilic difunctional methacrylic monomer.It offers low viscosity, low volatility and fast cure speed. | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| Raybo 68 HydroSlip | Raybo Chemical | Raybo 68 HydroSlip is a coating and ink additive in a white liquid form. This product is most commonly used to improve flow control, mar resistance, and slip in water-based and water-reducible coating and ink system applications. | |
| JONCRYL® 652-A | BASF Dispersions & Resins | Joncryl® 652-A is an emulsion of a specialty resin developed for water-based inks and overprint varnishes. Benefits include a very hard resin, rapid resolubility, hydrophilic nature of the polymer, and can be used as a main or modifying resin. | |
| E. GLYCOL ETHER DM | Brenntag North America | E. GLYCOL ETHER DM (E. glycol ether DM) is a very hydrophilic, slow-evaporating glycol ether. It is a colorless liquid with a mild, pleasant odor. It is miscible with water and most organic solvents. | Request Sample |
| MODAFLOW® AQ 3000 | Allnex | MODAFLOW® AQ 3000 -flow/leveling/levelling- is an acrylic flow additive for aqueous coatings, without silicone addition. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries. | Request Sample |
| 3,6–DIOXAOCTANEDIOIC ACID | AMRI Global | 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic...veja mais 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
| POLYGLYCOL DIACID 600 | AMRI Global | POLYGLYCOL DIACID 600 is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic...veja mais POLYGLYCOL DIACID 600 is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
| 3,6,9–TRIOXADECANOIC ACID | AMRI Global | 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic...veja mais 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
| 3,6,9–TRIOXAUNDECANEDIOIC ACID | AMRI Global | 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic...veja mais 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
| AEROSOL® IB-45 Surfactant | Univar Solutions | AEROSOL® IB-45 Surfactant is a very hydrophilic surface active agent that exhibits excellent compatibility with electrolytes. It is an extremely efficient wetting agent in high concentrations of electrolytes. | Request Sample |
| Lithol Red RB (3156W) | Ggink International Limited | Lithol Red RB (3156W) is a blue shade, red calcium naphthol, pigment with a Color Index number of 15630:2 (PR 49:2). This product has hydrophilic properties. Lithol Red RB (3156W) is used in water based ink applications and also in polyvinybutyral ink. | |
| AEROSOL® 22 Surfactant | Univar Solutions | AEROSOL® 22 Surfactant is a surfactant combining high hydrophilic and hydrophobic moieties with excellent acid and alkali compatibility. Emulsifier, dispersant, and hydrotrope solubilizer. Primary and secondary emulsifier in emulsion polymerization. | Request Sample |
| DAOTAN® TW 6473/37WA | Allnex | Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provide...veja mais Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provides good shear stability and pigment compatibility. veja menos | Request Sample |
| AGITAN® 761 | Munzing Chemie | AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coating...veja mais AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. veja menos | |
| AGITAN® 731 | Munzing Chemie | AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...veja mais AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. veja menos | |
| AGITAN® 760 | Munzing Chemie | AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...veja mais AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. veja menos | |
| AGITAN® 701 | Munzing Chemie | AGITAN® 701 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated and modified fatty compounds and nonionic emulsifiers. It is well suited for water reducible systems and aqueous gloss emulsion systems. It is commonly used in adh...veja mais AGITAN® 701 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated and modified fatty compounds and nonionic emulsifiers. It is well suited for water reducible systems and aqueous gloss emulsion systems. It is commonly used in adhesives and printing inks, and wood, architectural and industrial coatings. veja menos | |
| Filtrez™ 530 A | Lawter | Filtrez™ 530 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and softening point. Its low viscosity in aqueous ammonia solutions and alcohol, makes for high gloss in overprint varnishes. Filtrez™ 530 A is usually found i...veja mais Filtrez™ 530 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and softening point. Its low viscosity in aqueous ammonia solutions and alcohol, makes for high gloss in overprint varnishes. Filtrez™ 530 A is usually found in water-based gravure and flexographic inks and solvents. veja menos | |
| AGITAN® 280 | Munzing Chemie | AGITAN® 280 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems. It is com...veja mais AGITAN® 280 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. veja menos | |
| Filtrez™ 531 A | Lawter | Filtrez™ 531 A is a fumaric modified rosin ester, soluble in alcohol and with a moderately high acid value, but high softening point. The resin provides leveling and gloss and is an especially useful agent in floor polishes. It can be applied in water-bas...veja mais Filtrez™ 531 A is a fumaric modified rosin ester, soluble in alcohol and with a moderately high acid value, but high softening point. The resin provides leveling and gloss and is an especially useful agent in floor polishes. It can be applied in water-based flexographic and gravure inks and solvents. veja menos | |
| SETAQUA® 47-1257 | Allnex | SETAQUA® 47-1257 is water reducible acrylic polyol designed for use in high gloss, industrial bake enamel systems. When used in conjunction with melamine crosslinking resins such as Cymel® 303, it produces hard, high gloss coatings with excellent flexibil...veja mais SETAQUA® 47-1257 is water reducible acrylic polyol designed for use in high gloss, industrial bake enamel systems. When used in conjunction with melamine crosslinking resins such as Cymel® 303, it produces hard, high gloss coatings with excellent flexibility and chemical resistance. veja menos | Request Sample |
| EBECRYL® 873 | Allnex | EBECRYL® 873 is a fatty acid modified polyester hexaacrylate providing the proper hydrophilic-lipophilic balance necessary for good lithographic properties. Lithographic inks based on EBECRYL 873 display outstanding printing quality and high reactivity wh...veja mais EBECRYL® 873 is a fatty acid modified polyester hexaacrylate providing the proper hydrophilic-lipophilic balance necessary for good lithographic properties. Lithographic inks based on EBECRYL 873 display outstanding printing quality and high reactivity when cured by ultraviolet light (UV) or electron beam (EB). veja menos | Request Sample |
| LUBA-print 204/B-NEU | Munzing Chemie | LUBA-print 204/B-NEU is an opaque copolymer wax dispersion additive for paints and printing inks. It is used in water reducible paint-systems to improve surface hardness with good gloss stability, with excellent adhesion on metal and temporary corrosion r...veja mais LUBA-print 204/B-NEU is an opaque copolymer wax dispersion additive for paints and printing inks. It is used in water reducible paint-systems to improve surface hardness with good gloss stability, with excellent adhesion on metal and temporary corrosion resistance. veja menos | |
| VPA 90 | AMRI Global | VPA 90 (vinylphosphonic acid) has outstanding properties in several application areas due to the presence of both lipophilic and hydrophilic functionalities in one molecule. It is particularly suitable to improve material properties, for surfaces such as ...veja mais VPA 90 (vinylphosphonic acid) has outstanding properties in several application areas due to the presence of both lipophilic and hydrophilic functionalities in one molecule. It is particularly suitable to improve material properties, for surfaces such as coatings, to inhibit corrosion, and as additives for dispersions. veja menos | |
| VPA-DME | AMRI Global | VPA-DME (vinylphosphonic acid dimethylester) has outstanding properties in several application areas due to the presence of both lipophilic and hydrophilic functionalities in one molecule. It is particularly suitable to improve material properties, for su...veja mais VPA-DME (vinylphosphonic acid dimethylester) has outstanding properties in several application areas due to the presence of both lipophilic and hydrophilic functionalities in one molecule. It is particularly suitable to improve material properties, for surfaces such as coatings, to inhibit corrosion, and as additives for dispersions. veja menos | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...veja mais HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. veja menos | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...veja mais HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. veja menos | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...veja mais HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. veja menos | |
| AGITAN® 295 | Munzing Chemie | AGITAN® 295 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective defoamer for emulsion based and water reducible systems. It is commonly used in architec...veja mais AGITAN® 295 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective defoamer for emulsion based and water reducible systems. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. veja menos | |
| HS971 | Tianyi Chemical Engineering Material Co., Ltd. | HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...veja mais HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. veja menos | |
| HS973 | Tianyi Chemical Engineering Material Co., Ltd. | HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...veja mais HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. veja menos | |
| HS975 | Tianyi Chemical Engineering Material Co., Ltd. | HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...veja mais HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. veja menos | |
| Filtrez™ 5014 A | Lawter | Filtrez™ 5014 A is a fumaric modified rosin ester, soluble in alcohol and with the ability to display fast drying, low foaming and bronzing capabilities as well as good wet and dry rub resistance features. The product was created with the intention of pro...veja mais Filtrez™ 5014 A is a fumaric modified rosin ester, soluble in alcohol and with the ability to display fast drying, low foaming and bronzing capabilities as well as good wet and dry rub resistance features. The product was created with the intention of providing pigment wetting ability in water-based inks and coatings. Filtrez™ 5014 A was developed for use in gravure and flexographic ink applications and coatings. veja menos | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...veja mais Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. veja menos | |
| Filtrez™ 567 A | Lawter | Filtrez™ 567 A is a fumaric modified rosin ester that is soluble in alcohol with similar characteristics as acrylic resins as far as transfer, drying, gloss and water resistance of the dry film. Its chemical difference leads it to display an enhanced perf...veja mais Filtrez™ 567 A is a fumaric modified rosin ester that is soluble in alcohol with similar characteristics as acrylic resins as far as transfer, drying, gloss and water resistance of the dry film. Its chemical difference leads it to display an enhanced performance when compared to other water-soluble resins. Filtrez™ 567 A is ideally suited for use in gravure and flexographic inks and coatings. veja menos | |
| Pansil UltraSpheres™ 4000 | Tolsa, S.A. | Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marin...veja mais Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primers. veja menos | |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...veja mais AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. veja menos | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...veja mais Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. veja menos | |
| Fumapol 71-100 | Polidur San Luis | Fumapol 71-100 is a rosin modified fumaric resin at 100% of solids. This product presents a high melting range, fast solvent release and excellent compatibility with alcohols. It has applications in water and alcohol based flexographics inks, auto gloss w...veja mais Fumapol 71-100 is a rosin modified fumaric resin at 100% of solids. This product presents a high melting range, fast solvent release and excellent compatibility with alcohols. It has applications in water and alcohol based flexographics inks, auto gloss waxes and nitrocellulose lacquers. veja menos | |
| RHEOLATE® 2001 | Elementis | O RHEOLATE® 2001 é um aditivo líquido despejável, altamente eficiente e anti-sedimentação para uso em tintas e revestimentos com redução de água. | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...veja mais Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. veja menos | |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...veja mais Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. veja menos | |
| 2-Hydroxypropyl Methacrylate (HPMA) | Kowa American Corporation | 2-metacrilato de hidroxipropilo (HPMA) é um monómero funcional metacrilato Mitsubishi Rayon. | Request Sample |
| RHEOLATE® 310 | Elementis | O RHEOLATE® 310 é um espessante associativo baseado em poliol poliéster de baixo odor e livre de COV, para uso em sistemas com redução de água e látex convencional | |
| NUOSPERSE® FX 504 | Elementis | O NUOSPERSE® FX 504 é um agente de dispersão de pigmentos polimérico de baixa espuma que age eficientemente em vários pigmentos hidrofílicos e extensores que são utilizados em revestimentos aquosos. | |
| TINUVIN® 5151 | BASF Dispersions & Resins | Tinuvin® 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solven...veja mais Tinuvin® 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solventborne industrial and decorative coatings. The broad UV absorbance of the used UVA of Tinuvin® 5151 makes it suitable for a wide range of coatings for wood, plastics, and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. veja menos | |
| RHEOLATE® 350 D | Elementis | O RHEOLATE® 350 é um espessante associativo 50% ativo baseado em poliol poliéster projetado para proporcionar uma viscosidade de alto cisalhamento em sistemas sistemas com redução de água e látex convencional | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...veja mais RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. veja menos | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...veja mais RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. veja menos | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...veja mais RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. veja menos | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...veja mais RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. veja menos | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...veja mais RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. veja menos | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...veja mais RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. veja menos | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...veja mais RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. veja menos | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...veja mais RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. veja menos | |
| TAMOL™ 1124 | Univar Solutions | TAMOL™ 1124 is a high performance hydrophilic copolymer dispersant at 50% solids in ammonia with excellent dispersibility to achieve low sheen to high gloss coatings. It has excellent stability and compatibility with polymers, pigments/fillers and additiv...veja mais TAMOL™ 1124 is a high performance hydrophilic copolymer dispersant at 50% solids in ammonia with excellent dispersibility to achieve low sheen to high gloss coatings. It has excellent stability and compatibility with polymers, pigments/fillers and additives, along with good viscosity, flow and wet adhesion. It is a universal dispersant for compatibility with associative rheology modifiers as it is compatible with both anionic HASE and nonionic HEUR rheology modifiers. veja menos | Request Sample |
| BECKOPOX™ EH 613w/80WA | Allnex | Adutor de poliamina alifática á base de água, sem ácido acético. Endurecedor altamente reativo para revestimentos de redução de água em substratos minerais metálicos, onde cura rápida e escoação da água são importantes. | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | O Beckopox® EH 623W/80WA é um solvente a base de água e um solvente de cura de epoxi poliamina livre de ácido acético. É um endurecedor para revestimentos com redução de água em substratos metálicos e minerais, e cimentos de epoxi hidráulicos (ECC). | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Um adutor de poliamina alifática á base de água, sem ácido acético, que é um endurecedor altamente reativo para revestimentos à base de água (água-redutível) em substratos minerais metálicos, onde cura rápida e escoação de água são importantes. | Request Sample |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...veja mais RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...veja mais RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...veja mais RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...veja mais RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...veja mais RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...veja mais RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| Eco-Rez™ 9710 A | Lawter | Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images ...veja mais Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images during long and high-speed press runs. Eco-Rez™ 9710 A is ideally suited to be used in sheet-fed, heatset and coldset applications. veja menos | |
| MODAFLOW® AQ 3025 | Allnex | Aditivo acrílico de efusão para revestimentos aquosos, sem adição de silicone. | Request Sample |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...veja mais Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. veja menos | |
| BECKOPOX™ EP 386w/52WA | Allnex | Dispersão de resina sólida -Tipo 1 - plastificada internamente, com melhorada estabilidade de corte, por exemplo, para primers e revestimentos à base de água (água-redutível) de secagem rápida e anticorrosão, para plásticos. | Request Sample |
| CAB-O-SIL® M7D | Univar Solutions | CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic...veja mais CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL M-7D fumed silica, further modification of its surface is necessary to prevent crepe hardening. veja menos | Request Sample |
| CAB-O-SIL® MS75D | Univar Solutions | CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic...veja mais CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL MS-75D fumed silica, further modification of its surface is necessary to prevent crepe hardening. veja menos | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica pós-tratada com um hexadecil silano baseado em AEROSIL® 200. É utilizado em sistemas de revestimentos à base de água. | Request Sample |
| SR541 | Sartomer Americas | SR541 é um dimetacrilato bisfenol A etoxilado(6), é um monômero de baixa volatilidade usado na polimerização de radical livre. Ele tem um bom equilíbrio hidrofóbico e hidrofílico. Propriedades de desempenho incluem: resistência química e à água, flexibili...veja mais SR541 é um dimetacrilato bisfenol A etoxilado(6), é um monômero de baixa volatilidade usado na polimerização de radical livre. Ele tem um bom equilíbrio hidrofóbico e hidrofílico. Propriedades de desempenho incluem: resistência química e à água, flexibilidade, aderência, baixa retratibilidade, dureza, resistência à abrasão, resistência ao calor e resistência ao impacto. Aplicações sugeridas incluem: adesivos, , revestimentos, máscaras de solda, revestimentos fotorresistentes e fotopolímeros. veja menos | |
| 2-Hydroxyethyl Methacrylate (HEMA) | Kowa American Corporation | 2-hidroxietil metacrilato (HEMA) é um líquido claro branco água. Tem 6,79 cps de viscosidade a 20 ° C. | Request Sample |
| SR150 | Sartomer Americas | SR150 é um dimetacrilato bisfenol A etoxilado, é um monômero de baixa volatilidade usado na polimerização de radical livre. Ele proporciona um bom equilíbrio hidrofóbico e hidrofílico. As aplicações sugeridas incluem: adesivos, anaeróbicos, revestimentos,...veja mais SR150 é um dimetacrilato bisfenol A etoxilado, é um monômero de baixa volatilidade usado na polimerização de radical livre. Ele proporciona um bom equilíbrio hidrofóbico e hidrofílico. As aplicações sugeridas incluem: adesivos, anaeróbicos, revestimentos, polímeros de concreto, polímeros dentais, fotorresistores de eletrônicos, fotopolímeros, tintas flexográficas e de gravura, plastisóis, vedantes e óticos. veja menos | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic...veja mais Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. veja menos | |
| BENTONE® DE | Elementis | O BENTONE® DE é uma argila hectorite em pó altamente dispersivo, e altamente beneficiado. | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic...veja mais Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. veja menos | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic...veja mais Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. veja menos | |
| SR540 | Sartomer Americas | SR540, dimetacrilato bisfenol A etoxilado(4), é um monômero de baixa volatilidade usado na polimerização de radical livre. Ele proporciona um bom equilíbrio hidrofóbico e hidrofílico. Propriedades de desempenho incluem: resistência química e à água, flexi...veja mais SR540, dimetacrilato bisfenol A etoxilado(4), é um monômero de baixa volatilidade usado na polimerização de radical livre. Ele proporciona um bom equilíbrio hidrofóbico e hidrofílico. Propriedades de desempenho incluem: resistência química e à água, flexibilidade, aderência, baixa retratibilidade, dureza, resistência à abrasão e resistência ao impacto. As aplicações sugeridas incluem: adesivos anaeróbicos, revestimentos, polímeros de concreto, polímeros dentais, fotorresistores de eletrônicos, fotopolímeros, tintas flexográficas e de gravura, plastisóis e vedantes. veja menos | |
| OPTIGEL® WX | BYK | O OPTIGEL® WX, um produto de esmectite especialmente selecionado e ativado, tem uma elevada capacidade de expansão em água e mostra um efeito espessante tixotrópico acentuado. Este produto é estável em ácidos e bases diluídos e é particularmente eficaz em...veja mais O OPTIGEL® WX, um produto de esmectite especialmente selecionado e ativado, tem uma elevada capacidade de expansão em água e mostra um efeito espessante tixotrópico acentuado. Este produto é estável em ácidos e bases diluídos e é particularmente eficaz em sistemas ácidos, neutros e alcalinos. Este produto tem aplicações em tintas de emulsão, revestimentos de liberação, tintas de silicato, decapantes, tintas redutíveis água, produtos de limpeza líquidos, tintas, pastas de polimento e abrasivos e sub revestimentos automotivos. veja menos | |
| OPTIGEL® WX | Univar Solutions | O OPTIGEL® WX, um produto de esmectite especialmente selecionado e ativado, tem uma elevada capacidade de expansão em água e mostra um efeito espessante tixotrópico acentuado. Este produto é estável em ácidos e bases diluídos e é particularmente eficaz em...veja mais O OPTIGEL® WX, um produto de esmectite especialmente selecionado e ativado, tem uma elevada capacidade de expansão em água e mostra um efeito espessante tixotrópico acentuado. Este produto é estável em ácidos e bases diluídos e é particularmente eficaz em sistemas ácidos, neutros e alcalinos. Este produto tem aplicações em tintas de emulsão, revestimentos de liberação, tintas de silicato, decapantes, tintas redutíveis água, produtos de limpeza líquidos, tintas, pastas de polimento e abrasivos e sub revestimentos automotivos. veja menos | Request Sample |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica hidrofílica com uma área de superfície específica de 300 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, compostos para cabos e em borracha de silicone. | Request Sample |
| HDK® T30 | Wacker Chemical Corporation | O HDK® T30 é uma sílica sintética, hidrofóbica e amorfa, produzida por hidrólise da chama, e que é um pó coloidal branco de alta pureza. É aplicado como um agente espessante e tixotrópico em muitos sistemas orgânicos como, por exemplo, poliésteres insatur...veja mais O HDK® T30 é uma sílica sintética, hidrofóbica e amorfa, produzida por hidrólise da chama, e que é um pó coloidal branco de alta pureza. É aplicado como um agente espessante e tixotrópico em muitos sistemas orgânicos como, por exemplo, poliésteres insaturados, revestimentos, tintas de impressão, adesivos e outros. O HDK® T30 é usado como um enchimento de reforço em elastômeros, principalmente elastômeros de silicone. veja menos | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 é um sílica pirogênica hidrofóbica pós-tratada com o DDS (dimetildiclorossilano), baseada em uma sílica pirogênica hidrofílica, com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, borracha e seladores d...veja mais AEROSIL® R 974 é um sílica pirogênica hidrofóbica pós-tratada com o DDS (dimetildiclorossilano), baseada em uma sílica pirogênica hidrofílica, com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, borracha e seladores de silicone, tôner negativo, adesivos, polímeros de revestimento. veja menos | Request Sample |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic...veja mais Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. veja menos | |
| HDK® T40 | Wacker Chemical Corporation | O HDK® T40 é um pó branco coloidal de alta pureza e é uma sílica sintética, amorfa e hidrófila produzida por hidrólise da chama. Ele é utilizado como um aditivo de fluxo livre na produção de substâncias em pó e produtos de alimentação. O HDK® T40 é aplica...veja mais O HDK® T40 é um pó branco coloidal de alta pureza e é uma sílica sintética, amorfa e hidrófila produzida por hidrólise da chama. Ele é utilizado como um aditivo de fluxo livre na produção de substâncias em pó e produtos de alimentação. O HDK® T40 é aplicado como um agente espessante e tixotrópico em muitos sistemas orgânicos como, por exemplo, poliésteres insaturados, revestimentos, tintas de impressão, adesivos e outros. veja menos | Request Sample |
