| JONCRYL® 652-A | BASF Dispersions & Resins | Joncryl® 652-A is an emulsion of a specialty resin developed for water-based inks and overprint varnishes. Benefits include a very hard resin, rapid resolubility, hydrophilic nature of the polymer, and can be used as a main or modifying resin. | |
| KOMERATE D038 | Green Chemical Co., Ltd. | KOMERATE D038 is triethylene glycol diacrylate. It is difunctional, hydrophilic in nature, and offer low volatillity. | |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...veja mais ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. veja menos | Request Sample |
| DAOTAN® TW 6473/37WA | Allnex | Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provide...veja mais Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provides good shear stability and pigment compatibility. veja menos | Request Sample |
| MODAFLOW® Resin | Allnex | Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. T...veja mais Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. veja menos | Request Sample |
| EBECRYL® 873 | Allnex | EBECRYL® 873 is a fatty acid modified polyester hexaacrylate providing the proper hydrophilic-lipophilic balance necessary for good lithographic properties. Lithographic inks based on EBECRYL 873 display outstanding printing quality and high reactivity wh...veja mais EBECRYL® 873 is a fatty acid modified polyester hexaacrylate providing the proper hydrophilic-lipophilic balance necessary for good lithographic properties. Lithographic inks based on EBECRYL 873 display outstanding printing quality and high reactivity when cured by ultraviolet light (UV) or electron beam (EB). veja menos | Request Sample |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...veja mais RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. veja menos | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...veja mais RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. veja menos | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...veja mais RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. veja menos | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...veja mais RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. veja menos | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...veja mais RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. veja menos | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...veja mais RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. veja menos | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...veja mais RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. veja menos | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...veja mais RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. veja menos | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...veja mais RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...veja mais RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...veja mais RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...veja mais RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...veja mais RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...veja mais RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. veja menos | |
| DOWSIL™ RSN-0804 Resin | Univar Solutions | Dow Corning® RSN-0804 Resin is a silanol-functional resin supplied as a solvent solution. It offers excellent leafing properties and water resistance, very good gloss retention, and improves heat stability and weatherability of many organic resins. | Request Sample |
| MULTIFLOW® Resin | Allnex | Um modificador de efusão de baixa viscosidade para revestimentos industriais não-aquosos. | Request Sample |
| Alcohol Soluble Maleic Acid Resin | Suny Chem | Alcohol Soluble Maleic Acid Resin is made from maleic modified resins by esterification with polyalcohol. It is soluble in alcohol solvents, fast drying, and has high gloss. This product is typically used for alcohol soluble intaglio printing inks, gloss ...veja mais Alcohol Soluble Maleic Acid Resin is made from maleic modified resins by esterification with polyalcohol. It is soluble in alcohol solvents, fast drying, and has high gloss. This product is typically used for alcohol soluble intaglio printing inks, gloss oil polish and water-based inks. veja menos | |
| PAT-ADD DA 603 | Patcham USA | PAT-ADD DA 603 is a polymeric wetting and dispersing additive for waterborne pigment dispersions, architectural, industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon blacks. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic...veja mais PAT-ADD DA 603 is a polymeric wetting and dispersing additive for waterborne pigment dispersions, architectural, industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon blacks. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic organic pigments, enables high pigment loadings, at lowest viscosity, APEO free, optimizes color development, and strong contribution to electrostatic pigment stabilization, as well as steric stabilization; minimizing tendency for flocculation in the liquid stage as well as during application and film formation of waterborne formulations. veja menos | |
| Bitoner® Resin LH-3100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...veja mais Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. veja menos | |
| PAT-ADD DA 603 LV | Patcham USA | PAT-ADD DA 603 LV is a low VOC, polymeric, APEO free wetting and dispersing additive for waterborne pigment dispersions, architectural and industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon black. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic...veja mais PAT-ADD DA 603 LV is a low VOC, polymeric, APEO free wetting and dispersing additive for waterborne pigment dispersions, architectural and industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon black. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic organic pigments, enables high pigment loadings, at lowest viscosity, APEO free, low VOC, optimizes color development, and strong contribution to electrostatic pigment stabilization, as well as steric stabilization; minimizing tendency for flocculation in the liquid stage as well as during application and film formation of waterborne formulations. veja menos | |
| HDK® N20 | Wacker Chemical Corporation | Synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. | Request Sample |
| HDK® N20D | Wacker Chemical Corporation | Synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. | Request Sample |
| DOWSIL™ RSN-0840 Resin | Univar Solutions | Dow Corning® RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing Dow Corning® RSN-0840 Resin can give extremely high tempera...veja mais Dow Corning® RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing Dow Corning® RSN-0840 Resin can give extremely high temperature protection over short periods. This produces improves moisture resistance, heat stability, and weatherability of many organic resins. It also functions as a leveling agent to improve the surface appearance of organic protective coatings. veja menos | Request Sample |
| Bitoner® Resin BA-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...veja mais Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. veja menos | |
| Polyamide Resin TK 7010 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 70-100 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 7010 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 1014 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-140 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1014 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 1417 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 140-170 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1417 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 1720 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 170-200 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1720 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 2000 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 120-170 mpa.s at 25°C, and has a softening point of 115-125°C. Polyamide Resin TK 2000 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 688C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 120-180°C. Polyamide Resin TK 688C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 588B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-180 mpa.s at 25°C, and has a softening point of 105-115°C. Polyamide Resin TK 588B finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 588C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 100-180°C. Polyamide Resin TK 588C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| TEGO® Phobe 6510 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 6510 is a formulation of a polysiloxane resin / silane-blend for waterborne impregnations and primers. | Request Sample |
| Polyamide Resin TK 688B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freez...veja mais Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 110-180 mpa.s at 25°C, and has a softening point of 120-200°C. Polyamide Resin TK 688B finds application in gravure plastics, printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...veja mais Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. veja menos | |
| JONCRYL® 678 | BASF Dispersions & Resins | Joncryl® 678 is a general purpose, mid-range molecular weight resin for water-based inks, pigment dispersions and overprint varnishes. | |
| SARBIO® 6101 Resin | Sartomer Americas | O monômero SARBIO® 6101 é um monômero de baixa volatilidade monofuncional com uma estrutura hidrófoba. Ele exibe uma boa aderência e resistência à água. | |
| Soluryl 20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 20 is a low molecular weight styrene-acryl resin for water-based products. It is a gloss improving additives in water based overprint varnishes to produce a high gloss finish product. | |
| Bitoner® C9 Resin BP-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...veja mais Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. veja menos | |
| AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
| Bitoner® C9 Resin BP-140 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...veja mais Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. veja menos | |
| Mowinyl 972 | Nippon Gohsei | Mowinyl 972 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring a high glass transition temperature (Tg) and good antiblocking properties, this product is well suited for use in paint, coating, and printing toner a...veja mais Mowinyl 972 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring a high glass transition temperature (Tg) and good antiblocking properties, this product is well suited for use in paint, coating, and printing toner applications. veja menos | |
| Lithol Red R (3144W) | Ggink International Limited | Lithol Red R (3144W) is a hydrophilic barium, pigment with a Color Index number of 15630:1 (PR 49:1). Lithol Red R (3144W) is used in water based ink applications. | |
| SARBIO® 6100 Resin | Sartomer Americas | SARBIO® 6100 Resin is a low viscosity, polar monofunctional monomer that promotes adhesion to numerous substrates. It exhibits good adhesion and chemical resistance. | |
| RESYDROL® AX 247w/70BGMP | Allnex | Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-gra...veja mais Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. veja menos | Request Sample |
| Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
| SARBIO® 7106 Resin | Sartomer Americas | O oligômero SARBIO® 7106 é um oligômero de óleo vegetal acrilatado desenvolvido para sistemas de tinta curável por energia e revestimento pigmentado. Ele concede hidrofobicidade, bom fluxo e boa dispersabilidade de pigmento para tintas litográficas ou de ...veja mais O oligômero SARBIO® 7106 é um oligômero de óleo vegetal acrilatado desenvolvido para sistemas de tinta curável por energia e revestimento pigmentado. Ele concede hidrofobicidade, bom fluxo e boa dispersabilidade de pigmento para tintas litográficas ou de offset. Ele exibe uma boa resistência a impacto e resistência à água. veja menos | |
| SARBIO® 6102 Resin | Sartomer Americas | SARBIO® 6102 Resin is an excellent reactive diluent for oligomers. It produces polymers through free radical curing that have a high glass transition temperature. It exhibits good adhesion and chemical resistance. | |
| Lucidene 202 | Hydrite Chemical Co. | Lucidene 202 is a water-based styrene/acrylic copolymer designed for use with metallic pigments. This product is well suited for use in water-based inks and coatings. | |
| XIAMETER® OFS-6070 Silane | Univar Solutions | XIAMETER® OFS-6070 Silane is an alkoxy silane supplied as a low-viscosity liquid that is used to make inorganic surfaces hydrophobic. It is also used as a pigment treatment to aid in dispersion. | Request Sample |
| JONCRYL® 651 | BASF Dispersions & Resins | Is an emulsion of a specialty resin developed for waterborne inks. | |
| SHD-852 MEA | Hanwha Chemical (Thailand) Co., Ltd. | SHD-852 MEA is a Water-based resin solution for High performance Dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink, and offers improved dispersion and color strength compared to conventional dispersion r...veja mais SHD-852 MEA is a Water-based resin solution for High performance Dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink, and offers improved dispersion and color strength compared to conventional dispersion resin solutions. veja menos | |
| SHD-852 Ammonia | Hanwha Chemical (Thailand) Co., Ltd. | SHD-852 Ammonia is a water-based resin solution for high performance dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink and offers improved dispersion and ink stability compared to conventional dispersion...veja mais SHD-852 Ammonia is a water-based resin solution for high performance dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink and offers improved dispersion and ink stability compared to conventional dispersion resin solutions. veja menos | |
| Soluryl S-840 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-840 is a Styrene Acrylic resin for the neutral pH water-based products and is compatible with most common emulsions. It provides high gloss, good pigment dispersion, and good polymer surfactant for emulsion polymerization. | |
| SR542 | Sartomer Americas | SR542 is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance. | |
| Soluryl E-8040 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl E-8040 is a styrene-acryl emulsion for water-based products. It is recommended as a let down vehicle for corrugated paper. | |
| INT A81 HW Aldehyde Resin | Intech Synthetic Materials | INT A81 HW Aldehyde Resin is the condensation of urea and aliphatic aldehydes, colorlessly crystal or yellowish, soluble in most paint solvents except water and widely compatible with coatings and printing ink raw materials. INT A81 HW is an upgraded vers...veja mais INT A81 HW Aldehyde Resin is the condensation of urea and aliphatic aldehydes, colorlessly crystal or yellowish, soluble in most paint solvents except water and widely compatible with coatings and printing ink raw materials. INT A81 HW is an upgraded version of INT A81 featured by a higher viscosity in performance and improved molecular weight in chemistry compared with INT A81 veja menos | |
| SARBIO® 5103 Resin | Sartomer Americas | SARBIO® 5103 Resin is an alkoxylated acrylate monomer that offers excellent adhesion to plastics, particularly PVC and polycarbonate. SARBIO® 5103 monomer demonstrates good pigment wetting in screen and offset printing systems. It is also effective in pro...veja mais SARBIO® 5103 Resin is an alkoxylated acrylate monomer that offers excellent adhesion to plastics, particularly PVC and polycarbonate. SARBIO® 5103 monomer demonstrates good pigment wetting in screen and offset printing systems. It is also effective in promoting intercoat adhesion. It exhibits good adhesion and chemical resistance. veja menos | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| Soluryl E-80T (APE Free) | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl E-80T (APE Free) is a styrene-acryl emulsion for water-based products. It is recommended as a let down vehicle for corrugated paper. | |
| HydriCryl 130-S | Hydrite Chemical Co. | HydriCryl 130-S is a high viscosity, high molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132HV | Hydrite Chemical Co. | HydriCryl 132HV is a high viscosity mid range molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| Raybo 68 HydroSlip | Raybo Chemical | Raybo 68 HydroSlip is a coating and ink additive in a white liquid form. This product is most commonly used to improve flow control, mar resistance, and slip in water-based and water-reducible coating and ink system applications. | |
| ENDEX 155 | Univar Solutions | ENDEX 155 is a water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Reinforces the styrene end blocks of styrenic block copolymers. . | Request Sample |
| TEGO® Dispers 780 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 780 W is a polymeric, slightly anionic wetting and dispersing additive for high-quality waterborne ink formulations. It is an excellent choice for resin-containing, resin-reduced as well as resin-free grinds. TEGO® Dispers 780 W provides exc...veja mais TEGO® Dispers 780 W is a polymeric, slightly anionic wetting and dispersing additive for high-quality waterborne ink formulations. It is an excellent choice for resin-containing, resin-reduced as well as resin-free grinds. TEGO® Dispers 780 W provides excellent pigment stabilization for organic and inorganic pigments. veja menos | Request Sample |
| KOMERATE D048 | Green Chemical Co., Ltd. | KOMERATE D048 is a tetraethylene glycol diacrylate. It is a hydrophilic difunctional acrylic monomer.It offers low viscosity, low volatility and good adhesion. | |
| BECKOPOX™ EH 2162w/75WA | Allnex | BECKOPOX™ EH 2162w/75WA is an aliphatic polyamine adduct. It's also a hardener for water-reducible coatings on mineral and metallic substrates. | Request Sample |
| Soluryl RV-4965 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RV-4965 is a modified acryl-styrene copolymer for use in water-based calender overprint vanish. It is compatible with a wide range of other acrylics. | |
| ENDEX 160 | Univar Solutions | ENDEX 160 is a water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Reinforces the styrene end blocks of styrenic block copolymers. | Request Sample |
| UCECRYL® B 3033 | Allnex | UCECRYL® B 3033 is a waterbased acrylic resin developed for low VOC 1K concrete sealer market. | Request Sample |
| KOMERATE D048M | Green Chemical Co., Ltd. | KOMERATE D048M is a triethylene glycol dimethacrylate. It is a hydrophilic difunctional methacrylic monomer.It offers low viscosity, low volatility and fast cure speed. | |
| Silane Coupling Agent KH-580 | Zhejiang Feidian Chemical Co., Ltd. | Silane Coupling Agent KH-580 é um silano alquil de cadeia longa. É facilmente dissolvido em solventes orgânicos como hidrocarboneto, éter e cetona. Este produto é recomendado principalmente para uso com materiais inorgânicos como vidro e sílica. Pode melh...veja mais Silane Coupling Agent KH-580 é um silano alquil de cadeia longa. É facilmente dissolvido em solventes orgânicos como hidrocarboneto, éter e cetona. Este produto é recomendado principalmente para uso com materiais inorgânicos como vidro e sílica. Pode melhorar a ligação à matéria orgânica e fornecer benefícios de resistência à água, aumentando a propriedade mecânica dos produtos. veja menos | |
| MODAFLOW® AQ 3000 | Allnex | MODAFLOW® AQ 3000 -flow/leveling/levelling- is an acrylic flow additive for aqueous coatings, without silicone addition. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries. | Request Sample |
| Lithol Red RB (3156W) | Ggink International Limited | Lithol Red RB (3156W) is a blue shade, red calcium naphthol, pigment with a Color Index number of 15630:2 (PR 49:2). This product has hydrophilic properties. Lithol Red RB (3156W) is used in water based ink applications and also in polyvinybutyral ink. | |
| Tykote® 6152 | Mallard Creek Polymers, Inc. | Tykote® 6152 is a styrene-acrylic emulsion designed to give excellent oil and resistance while balancing water resistance and flexibility. It is a hard film forming styrene-acrylic emulsion designed for oil and grease resistant barrier coatings. | |
| E. GLYCOL ETHER DM | Brenntag North America | E. GLYCOL ETHER DM (E. glycol ether DM) is a very hydrophilic, slow-evaporating glycol ether. It is a colorless liquid with a mild, pleasant odor. It is miscible with water and most organic solvents. | Request Sample |
| CYMEL® 3020 | Allnex | CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is inso...veja mais CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is insoluble in water but has excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. veja menos | Request Sample |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| Silane Couping Agent FD‐1106 | Zhejiang Feidian Chemical Co., Ltd. | Silane Couping Agent FD-1106 é um silano de aluminato modificado. É fornecido como um líquido incolor e transparente. É usado nas resinas de matriz e enchimentos inorgânicos. Este produto é também utilizado no material de pirocondensação, para manipulação...veja mais Silane Couping Agent FD-1106 é um silano de aluminato modificado. É fornecido como um líquido incolor e transparente. É usado nas resinas de matriz e enchimentos inorgânicos. Este produto é também utilizado no material de pirocondensação, para manipulação de Mg(OH)2, Al(OH)3, ele pode diminuir drasticamente o Mg(OH)2, a absorção de água de Al(OH)3, melhorar a compatibilidade com resinas e também pode promover a propriedade mecânica física e o grau de superfície final do produto. veja menos | |
| VIACRYL® SC 175w/40WAIP | Allnex | Viacryl® SC 175W/40WAIP is a water dilutable acrylic resin. It is used as a binder for water dilutable flexographic and special gravure printing inks. | Request Sample |
| 3,6–DIOXAOCTANEDIOIC ACID | AMRI Global | 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic...veja mais 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
| POLYGLYCOL DIACID 600 | AMRI Global | POLYGLYCOL DIACID 600 is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic...veja mais POLYGLYCOL DIACID 600 is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
| 3,6,9–TRIOXADECANOIC ACID | AMRI Global | 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic...veja mais 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
| 3,6,9–TRIOXAUNDECANEDIOIC ACID | AMRI Global | 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic...veja mais 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
| AGITAN® 761 | Munzing Chemie | AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coating...veja mais AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. veja menos | |
| RESYDROL® AY 586w/45WA | Allnex | RESYDROL® AY 586W/45WA is an oxidatively drying acrylic modified alkyd resin as aqueous emulsion. It's a sole binder for waterborne decorative paints, exterior wood stains and industrial finishes. | Request Sample |
| Soluryl 812 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 812 is a resin solution for water-based products. It provides good pigment dispersion, excellent ink transfer and printability, and good compatibility with Soluryl emulsions. | |
| AGITAN® 731 | Munzing Chemie | AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...veja mais AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. veja menos | |
| AGITAN® 760 | Munzing Chemie | AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...veja mais AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. veja menos | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer designed for use in cold seal adhesives. Excellent early water resistance. | |
| Silane Coupling Agent KH-7180 | Zhejiang Feidian Chemical Co., Ltd. | KH-7180 é um silano versátil epóxi e organo reativo com dois grupos etóxi hidrolizáveis. Oferece um desempenho de promotor de aderência estável e não amarelante durante a vida útil enquanto aumenta as propriedades físicas em sistemas de adesivos e selante...veja mais KH-7180 é um silano versátil epóxi e organo reativo com dois grupos etóxi hidrolizáveis. Oferece um desempenho de promotor de aderência estável e não amarelante durante a vida útil enquanto aumenta as propriedades físicas em sistemas de adesivos e selantes de látex e à base de água. Este produto é recomendado para adesivos laminados automotivos, adesivos laminados de mobília e adesivos em flocos. veja menos | |
| CYMEL® 1156 | Allnex | CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction...veja mais CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction resistance is desired. Its excellent throwing power and migration efficiency makes this product suitable for anodic electrodeposition coatings. veja menos | Request Sample |
| UCECOAT® 7520 | Allnex | UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCEC...veja mais UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation resin or in combination with other water-borne resins. veja menos | Request Sample |
| AEROSOL® IB-45 Surfactant | Univar Solutions | AEROSOL® IB-45 Surfactant is a very hydrophilic surface active agent that exhibits excellent compatibility with electrolytes. It is an extremely efficient wetting agent in high concentrations of electrolytes. | Request Sample |
