DOWSIL™ RSN-0804 Resin | Univar Solutions | Dow Corning® RSN-0804 Resin is a silanol-functional resin supplied as a solvent solution. It offers excellent leafing properties and water resistance, very good gloss retention, and improves heat stability and weatherability of many organic resins. | |
DOWSIL™ RSN-0840 Resin | Univar Solutions | Dow Corning® RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing Dow Corning® RSN-0840 Resin can give extremely high tempera...veja mais Dow Corning® RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing Dow Corning® RSN-0840 Resin can give extremely high temperature protection over short periods. This produces improves moisture resistance, heat stability, and weatherability of many organic resins. It also functions as a leveling agent to improve the surface appearance of organic protective coatings. veja menos | |
XIAMETER® OFS-6070 Silane | Univar Solutions | XIAMETER® OFS-6070 Silane is an alkoxy silane supplied as a low-viscosity liquid that is used to make inorganic surfaces hydrophobic. It is also used as a pigment treatment to aid in dispersion. | |
ENDEX 155 | Univar Solutions | ENDEX 155 is a water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Reinforces the styrene end blocks of styrenic block copolymers. . | |
ENDEX 160 | Univar Solutions | ENDEX 160 is a water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Reinforces the styrene end blocks of styrenic block copolymers. | |
AEROSOL® IB-45 Surfactant | Univar Solutions | AEROSOL® IB-45 Surfactant is a very hydrophilic surface active agent that exhibits excellent compatibility with electrolytes. It is an extremely efficient wetting agent in high concentrations of electrolytes. | |
AEROSOL® 22 Surfactant | Univar Solutions | AEROSOL® 22 Surfactant is a surfactant combining high hydrophilic and hydrophobic moieties with excellent acid and alkali compatibility. Emulsifier, dispersant, and hydrotrope solubilizer. Primary and secondary emulsifier in emulsion polymerization. | |
REGALITE S-1100 | Univar Solutions | REGALITE S-1100 is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing. | |
REGALITE R-1100 | Univar Solutions | REGALITE R-1100 is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon agin...veja mais REGALITE R-1100 is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. veja menos | |
RHOPLEX™ WL-51 | Univar Solutions | RHOPLEX™ WL-51 is an acrylic resin ideal for high-performance waterborne finishes for coating plastic substrates which are used for business machines and office equipment which require ideal durability, appearance and application-use. Examples of plastic ...veja mais RHOPLEX™ WL-51 is an acrylic resin ideal for high-performance waterborne finishes for coating plastic substrates which are used for business machines and office equipment which require ideal durability, appearance and application-use. Examples of plastic substrates include acrylonitrile, butadiene, styrene, polycarbonate, polyphenylene oxide, polyvinyl chloride, acrylic, polystyrene, high-impact polystyrene, polypropylene, and pre-treated thermoplastic polyolefin. veja menos | |
REGALITE R-1125 | Univar Solutions | REGALITE R-1125 is a low molecular weight fully hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is particularly useful as tackifier for hot melt systems based on EVA copolymers and SIS block copolymers. | |
LUMIFLON® FD1000 | Univar Solutions | LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weigh...veja mais LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weight combined with a high hydroxyl value for creating 2K waterbased polyurethane coatings with a high crosslink density. This waterborne polyol is classified as a dispersion as it is synthesized without emulsifier. This unique, emulsifier-free technology allows for the formulation of waterbased 2K polyurethane coatings with the same performance as traditional solventbased 2K coatings. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. veja menos | |
LUMIFLON® FE4300 | Univar Solutions | LUMIFLON® FE4300 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coat...veja mais LUMIFLON® FE4300 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coatings with excellent resistance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. veja menos | |
PLASTOLYN 240 | Univar Solutions | PLASTOLYN 240 is a versatile, aromatic, water white, high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchlor...veja mais PLASTOLYN 240 is a versatile, aromatic, water white, high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and block copolymers. veja menos | |
MAINCOTE™ HG-54D | Univar Solutions | MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial mainten...veja mais MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial maintenance markets. veja menos | |
KRISTALEX 5140 | Univar Solutions | KRISTALEX 5140 is a high softening point, low molecular weight resin produced by copolymerization of pure aromatic monomers. It is designed primarily for use as a modifier resin in high performance adhesives and coating compositions requiring water clear ...veja mais KRISTALEX 5140 is a high softening point, low molecular weight resin produced by copolymerization of pure aromatic monomers. It is designed primarily for use as a modifier resin in high performance adhesives and coating compositions requiring water clear color, heat stability, and resistance to oxidation and discoloration. . veja menos | |
PLASTOLYN 290 | Univar Solutions | PLASTOLYN 290 is a versatile, aromatic, water white, very high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinyl...veja mais PLASTOLYN 290 is a versatile, aromatic, water white, very high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and block copolymers. veja menos | |
REGALITE S-5100 | Univar Solutions | REGALITE S-5100 is an unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as a tackifier in hot melt adhesives based on Sis and SBS block copolymers, where it provides...veja mais REGALITE S-5100 is an unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as a tackifier in hot melt adhesives based on Sis and SBS block copolymers, where it provides superior room temperature cohesion combined with very low adhesive viscosity. veja menos | |
DOWSIL™ 8590 Additive | Univar Solutions | Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emuls...veja mais Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. veja menos | |
XIAMETER™ AFE-1410 Antifoam Emulsion | Univar Solutions | XIAMETER™ AFE-1410 Antifoam Emulsion is a water-dilutable, 10% active silicone emulsion that is designed to control foam in aqueous systems. It offers good stability, and is easily dispersed as supplied or when diluted. This product is recommended for agrochemicals, textiles, gas processing, printing fountain solutions, resin...veja mais XIAMETER™ AFE-1410 Antifoam Emulsion is a water-dilutable, 10% active silicone emulsion that is designed to control foam in aqueous systems. It offers good stability, and is easily dispersed as supplied or when diluted. This product is recommended for agrochemicals, textiles, gas processing, printing fountain solutions, resin manufacturing, and antifoaming in aqueous systems from highly acidic to highly alkaline. veja menos | |
XIAMETER™ ACP-1400 Antifoam Compound | Univar Solutions | XIAMETER™ ACP-1400 Antifoam Compound is a foam preventative for aqueous and nonaqueous industrial processes. It gives excellent performance in a wide range of applications including extreme pH systems. Some typical uses include resin manufacturing, cuttin...veja mais XIAMETER™ ACP-1400 Antifoam Compound is a foam preventative for aqueous and nonaqueous industrial processes. It gives excellent performance in a wide range of applications including extreme pH systems. Some typical uses include resin manufacturing, cutting oils, detergents, oil refining, and solvent processing. veja menos | |
RHOPLEX™ WL-100 | Univar Solutions | RHOPLEX™ WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal s...veja mais RHOPLEX™ WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) accommodates a wide range of formulation types and process types capable of meeting many applications. It can achieve volume solids above conventional waterborne binders. veja menos | |
XIAMETER® OFS-0772 Siliconate | Univar Solutions | XIAMETER® OFS-0772 Siliconate is a nonflammable, water soluble sodium methyl siliconate solution designed to impart water repellency to a wide variety of surfaces. The siliconate reacts with moisture and carbon dioxide in the air to form an insoluble water-resistant resin...veja mais XIAMETER® OFS-0772 Siliconate is a nonflammable, water soluble sodium methyl siliconate solution designed to impart water repellency to a wide variety of surfaces. The siliconate reacts with moisture and carbon dioxide in the air to form an insoluble water-resistant resin within 24 hours. Applications include hydrophobing treatment of plasterboard and plaster blocks and teatment for powders and granular materials to make them water repellent and free flowing, and to reduce caking. veja menos | |
KRISTALEX 1120 | Univar Solutions | KRISTALEX 1120 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | |
KRISTALEX 3070 | Univar Solutions | KRISTALEX 3070 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | |
KRISTALEX 3085 | Univar Solutions | KRISTALEX 3085 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | |
KRISTALEX 3100 | Univar Solutions | KRISTALEX 3100 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | |
KRISTALEX 3115LV | Univar Solutions | KRISTALEX 3115LV is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | |
RHOPLEX™ P-376 50% | Univar Solutions | RHOPLEX™ P-376 50% is a styrene acrylic binder is a hydrophobic binder with excellent wet and dry pick resistance for offset printing. This latex is effective in promoting sheet gloss development, glueability properties for packaging, and ink/aqueous coat...veja mais RHOPLEX™ P-376 50% is a styrene acrylic binder is a hydrophobic binder with excellent wet and dry pick resistance for offset printing. This latex is effective in promoting sheet gloss development, glueability properties for packaging, and ink/aqueous coating holdout in offset printing. It has excellent compatibility with natural and synthetic co-binders and adhesion to paper and non-conventional substrates. veja menos | |
MAINCOTE™ PR-15 | Univar Solutions | MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be ...veja mais MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be formulated into high-quality OEM and general industrial topcoat finishes for steel substrates treated with zinc or iron phosphate. veja menos | |
RHOPLEX™ AC-1034 | Univar Solutions | RHOPLEX™ AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edgesealer products and offers very good compatibility with high leve...veja mais RHOPLEX™ AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edgesealer products and offers very good compatibility with high levels of waxes and fillers, which are often used in such products. RHOPLEX™ AC-1034 can also be used as a clear primer or sealer coat to provide water resistance. veja menos | |
TAMOL™ 1124 | Univar Solutions | TAMOL™ 1124 is a high performance hydrophilic copolymer dispersant at 50% solids in ammonia with excellent dispersibility to achieve low sheen to high gloss coatings. It has excellent stability and compatibility with polymers, pigments/fillers and additiv...veja mais TAMOL™ 1124 is a high performance hydrophilic copolymer dispersant at 50% solids in ammonia with excellent dispersibility to achieve low sheen to high gloss coatings. It has excellent stability and compatibility with polymers, pigments/fillers and additives, along with good viscosity, flow and wet adhesion. It is a universal dispersant for compatibility with associative rheology modifiers as it is compatible with both anionic HASE and nonionic HEUR rheology modifiers. veja menos | |
CHEMREZ 30 | Univar Solutions | CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin...veja mais CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin solution to dry pigment. CHEMREZ 30 has been used with a wide range of organic pigments as well as carbon black. CHEMREZ 30 as a letdown vehicle can be used upwards of 50% of the formulation. veja menos | |
TAMOL™ 983 | Univar Solutions | TAMOL™ 983 is a versatile, low-cost, low foaming, 35% solids, water-soluble polyacid dispersant in potassium form. It is recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl-acrylic formulations and is effective over a pH r...veja mais TAMOL™ 983 is a versatile, low-cost, low foaming, 35% solids, water-soluble polyacid dispersant in potassium form. It is recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl-acrylic formulations and is effective over a pH range of 7 to 11 with a wide temperature range. It is highly compatible with anionic HASE associative rheology modifiers providing excellent heat age and viscosity stability. It has excellent color acceptance with glycol and water dispersed colorants, including hard to disperse pigments such as red iron oxide. veja menos | |
CAB-O-SIL® M7D | Univar Solutions | CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic...veja mais CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL M-7D fumed silica, further modification of its surface is necessary to prevent crepe hardening. veja menos | |
CAB-O-SIL® MS75D | Univar Solutions | CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic...veja mais CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL MS-75D fumed silica, further modification of its surface is necessary to prevent crepe hardening. veja menos | |
TAMOL™ 963 | Univar Solutions | TAMOL™ 963 is a versatile, low-cost, low foaming, water-soluble polyacid dispersant recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7 to 11 with a wide temperatu...veja mais TAMOL™ 963 is a versatile, low-cost, low foaming, water-soluble polyacid dispersant recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7 to 11 with a wide temperature range. It is supplied at 35% solids in the ammonia form and highly compatible with anionic HASE associative rheology modifiers. It t can be used with ACRYSOL™TM DR series of rheology modifier products to offer excellent heat age and viscosity stability. It has excellent color acceptance with glycol and water dispersed colorants including hard to disperse pigments such as red iron oxide. Features B. veja menos | |
OPTIGEL® WX | Univar Solutions | O OPTIGEL® WX, um produto de esmectite especialmente selecionado e ativado, tem uma elevada capacidade de expansão em água e mostra um efeito espessante tixotrópico acentuado. Este produto é estável em ácidos e bases diluídos e é particularmente eficaz em...veja mais O OPTIGEL® WX, um produto de esmectite especialmente selecionado e ativado, tem uma elevada capacidade de expansão em água e mostra um efeito espessante tixotrópico acentuado. Este produto é estável em ácidos e bases diluídos e é particularmente eficaz em sistemas ácidos, neutros e alcalinos. Este produto tem aplicações em tintas de emulsão, revestimentos de liberação, tintas de silicato, decapantes, tintas redutíveis água, produtos de limpeza líquidos, tintas, pastas de polimento e abrasivos e sub revestimentos automotivos. veja menos | |
TAMOL™ 731A | Univar Solutions | TAMOL™ 731A is an extremely versatile hydrophobic dispersant for acrylic, butadiene/styrene, vinyl acetate/ethylene, and vinyl acrylic based coatings. Benefits include: very effective with inorganic pigments, high efficiency performance, exceptional gloss...veja mais TAMOL™ 731A is an extremely versatile hydrophobic dispersant for acrylic, butadiene/styrene, vinyl acetate/ethylene, and vinyl acrylic based coatings. Benefits include: very effective with inorganic pigments, high efficiency performance, exceptional gloss development, pigment wetting, wide range compatibility, compatibility with HEUR rheology modifiers. veja menos | |
TAMOL™ 851 | Univar Solutions | TAMOL™ 851 is a versatile 30% solids polyacid pigment dispersant, free of ammonia and formaldehyde, with low-foam and used in a wide range of latex paint formulations. It is recommended for flat through semi-gloss acrylic, styrene/acrylic, and vinyl acryl...veja mais TAMOL™ 851 is a versatile 30% solids polyacid pigment dispersant, free of ammonia and formaldehyde, with low-foam and used in a wide range of latex paint formulations. It is recommended for flat through semi-gloss acrylic, styrene/acrylic, and vinyl acrylic by providing efficient dispersibility and compatibility with ZnO and other pigments/fillers, viscosity stability and highly compatible with anionic HASE associative rheology modifiers. veja menos | |
TAMOL™ 1254 | Univar Solutions | TAMOL™ 1254 is a versatile, low-cost, low-foaming polyacid dispersant providing outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulation...veja mais TAMOL™ 1254 is a versatile, low-cost, low-foaming polyacid dispersant providing outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulations. In addition to good efficiency, this polyacid dispersant provides excellent stability and color acceptance even in formulations containing zinc oxide. Itt is supplied at 35% solids and is both ammonia and formaldehyde free. It is highly compatible with anionic HASE associative rheology modifiers. veja menos | |
RHOPLEX™ 52 | Univar Solutions | RHOPLEX™ 52 is a styrene-acrylic emulsion designed to be employed in stain blocking interior and exterior primers. It provides excellent tannin and marker stain blocking in zinc oxide free and zinc oxide containing formulations. It has excellent sandabili...veja mais RHOPLEX™ 52 is a styrene-acrylic emulsion designed to be employed in stain blocking interior and exterior primers. It provides excellent tannin and marker stain blocking in zinc oxide free and zinc oxide containing formulations. It has excellent sandability allowing formulated primers to be quickly topcoated. It has excellent alkaki resistance minimizing efflorescence and good adhesion to a variety of substrates including alkyds, wood, masonry, aluminum and steel. It also has very good enamel holdout properties.RHOPLEX™ 52 can be coalesced with non-volatile plasticisers to formulate primers with <5g/l VOC and is made APEO-free(1). veja menos |