| CYMEL® UI-21-E Resin | Allnex | A resina CYMEL® UI-21-E é uma resina de ureia parcialmente iso-butilada fornecida em etanol. Foi projetada para uma ampla gama de acabamentos em madeira industrial, de baixo odor e alto rendimento. | Request Sample |
| CYMEL® UI-27-EI | Allnex | A resina CYMEL® UI-27-EI é uma resina de ureia parcialmente iso-butilada fornecida em uma mistura de etano e iso-butanol. É adequada para uso em aplicações de revestimento de madeira de cura ácida e formulações para demãos finais e primer industrial em ge...veja mais A resina CYMEL® UI-27-EI é uma resina de ureia parcialmente iso-butilada fornecida em uma mistura de etano e iso-butanol. É adequada para uso em aplicações de revestimento de madeira de cura ácida e formulações para demãos finais e primer industrial em geral. veja menos | Request Sample |
| CYMEL® UI-38-I Resin | Allnex | A resina CYMEL® UI-38-I é um reticulador de ureia parcialmente iso-butilada fornecido em iso-butanol e para uso em aplicações industriais em estufa e especialmente sistemas aplicados por spray eletro-estático. Devido à resistência insatisfatória contra in...veja mais A resina CYMEL® UI-38-I é um reticulador de ureia parcialmente iso-butilada fornecido em iso-butanol e para uso em aplicações industriais em estufa e especialmente sistemas aplicados por spray eletro-estático. Devido à resistência insatisfatória contra intempéries das resinas de ureia, este produto não é recomendado para aplicações exteriores. veja menos | Request Sample |
| CYMEL® XW 3106 | Allnex | A resina CYMEL® XW 3106 é um agente de reticulação de melamina de alta pigmentação, especialmente alquilada projetado para formulações a base de solvente, ambiente de duas partes e de baixo cozimento. O potencial de cura em baixas temperaturas para este r...veja mais A resina CYMEL® XW 3106 é um agente de reticulação de melamina de alta pigmentação, especialmente alquilada projetado para formulações a base de solvente, ambiente de duas partes e de baixo cozimento. O potencial de cura em baixas temperaturas para este reticulador oferece a oportunidade de formular revestimento de alta performance para substratos sensíveis ao calor. Esses sistemas têm uma excelente dureza prematura, propriedades de resistência, aparência e flexibilidade para ciclo quente/frio. veja menos | Request Sample |
| DAPRO® DF 1492 | Elementis | O DAPRO® DF 1492 é um eliminador de bolhas livre de silicone e altamente eficiente. Este produto é utilizado principalmente para reduzir ou eliminar a espuma existente antes do enchimento e como um desespumante do local da prensa em aplicações de impressã...veja mais O DAPRO® DF 1492 é um eliminador de bolhas livre de silicone e altamente eficiente. Este produto é utilizado principalmente para reduzir ou eliminar a espuma existente antes do enchimento e como um desespumante do local da prensa em aplicações de impressão flexográfica de gravuras. Deve ser utilizado sempre que um efeito imediato e de curto prazo seja necessário. Todos os componentes não-volatéis do DAPRO® DF 1492 Foam Suppressor estão em conformidade com o FDA sob o Título CFR 21 175.300. veja menos | |
| DAPRO® DF 1760 | Elementis | O DAPRO® DF 1760 é um eliminador de bolhas de longa duração, livre de silicone e muito eficiente. Este produto permanece eficiente após longo período de armazenagem do sistema no qual ele é utilizado, Todos os componentes não-volatéis do DAPRO® DF 1760 Fo...veja mais O DAPRO® DF 1760 é um eliminador de bolhas de longa duração, livre de silicone e muito eficiente. Este produto permanece eficiente após longo período de armazenagem do sistema no qual ele é utilizado, Todos os componentes não-volatéis do DAPRO® DF 1760 Foam Suppressor estão em conformidade sob o Título CFR 21 175.105; 175.300; 176.170 e 176.180. veja menos | |
| DAPRO® DF 5300 | Elementis | O DAPRO® DF 5300 é um agente anti-espumante, que libera as bolhas para uma variedade de revestimentos a base de solventes. As aplicações incluem esmaltes, PUR, epoxis, e acrílicos. | |
| DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | |
| DAPRO® DF 7005 | Elementis | O DAPRO® DF 7005 é um desespumante liquido sem silicone, de uso econômico, para aplicações universais a base de água. O produto apresenta uma ótima eficiência a longa prazo. | |
| DAPRO® DF 7007 | Elementis | O DAPRO® DF 7007 é um catalisador quelatante para substituir os secadores baseados em cobalto em revestimentos a base de água. | |
| DAPRO® DF 7010 | Elementis | O DAPRO® DF 7010 é um desespumante liquido de uso econômico, para aplicações universais a base de água. O produto apresenta uma ótima eficiência a longa prazo. | |
| DAPRO® DF 7015 | Elementis | O DAPRO® DF 7010 é um desespumante para sistemas a base de água com ótimas propriedades emulsificantes. É especificamente recomendado para uso em pastas de moagem e tintas de emulsão. | |
| DAPRO® DF 7540 | Elementis | O DAPRO® DF 7540 é um desespumante líquido sem silicone para uso em sistemas a base de água. Este produto tem excelentes propriedades de emulsificação na água | |
| DAPRO® DF 7580 | Elementis | O DAPRO® DF 7580 é um desespumante sem silicone para sistemas a base de água. Este produto é facilmente emulsificável em água | |
| DAPRO® DF 880 | Elementis | O DAPRO® DF 880 é um aditivo liberador de ar sem silicone que pode ser utilizado para impedir a formação de espuma em sistemas de revestimento a base de água. Este produto proporciona uma quebra rápida de bolhas em filmes molhados aplicados e impede també...veja mais O DAPRO® DF 880 é um aditivo liberador de ar sem silicone que pode ser utilizado para impedir a formação de espuma em sistemas de revestimento a base de água. Este produto proporciona uma quebra rápida de bolhas em filmes molhados aplicados e impede também a obstrução de ar durante as etapas de processamento tais como moagem, mistura e bombeamento; veja menos | |
| DAPRO® DF 975 | Elementis | O DAPRO® DF 975 é um desespumante sem silicone baseado em uma dispersão de sólidos olefínicos. Este produto apresente excelentes propriedades de controle de espuma em tintas industriais e arquiteturais e revestimentos e tintas. | |
| DAPRO® FA-NCO-6 | Elementis | O DAPRO® FA NCO-6 é uma dispersão de agentes de alisamento em essências minerais. Oferece uma incorporação simples de agitação, uma consistência e redução uniforme e eficiente do brilho | |
| DAPRO® FK 321 | Elementis | O DAPRO® FK 321 é um auxiliar eficiente para redução da resistência das tintas que são borrifadas deodo eletro-estático | |
| DAPRO® FX 511 | Elementis | O DAPRO® FX 511 é um agente coalescente de baixo odor que foi projetado para dispersões, tintas de dispersão e rebocos | |
| DAPRO® FX 513 | Elementis | O DAPRO® FX 513 é um agente coalescente amigável ambientalmente preparado a partir de recursos renováveis. É projetado especificamente para sistemas de tinta de baixo COV. Este produto apresenta excelente formação de filme, resistência a limpeza pesada, m...veja mais O DAPRO® FX 513 é um agente coalescente amigável ambientalmente preparado a partir de recursos renováveis. É projetado especificamente para sistemas de tinta de baixo COV. Este produto apresenta excelente formação de filme, resistência a limpeza pesada, melhora no brilho e tempo aberto. veja menos | |
| DAPRO® FX 514 | Elementis | O DAPRO® FX 514 é um agente coalescente amigável ambientalmente preparado a partir de recursos renováveis. É projetado especificamente para sistemas de revestimentos a base de água de baixo COV, especificamente adesivos. Este produto é inodoro e livre de ...veja mais O DAPRO® FX 514 é um agente coalescente amigável ambientalmente preparado a partir de recursos renováveis. É projetado especificamente para sistemas de revestimentos a base de água de baixo COV, especificamente adesivos. Este produto é inodoro e livre de COV. O DAPRO® FX 514presenta excelente formação de filme, resistência a limpeza pesada, melhora no brilho e tempo aberto. veja menos | |
| DAPRO® NA 1622 | Elementis | O DAPRO® NA 1622 é um desespumante líquido de silicone modificado para uso em sistemas de solventes. Possui excelentes propriedades anti-espumantes em vários sistemas de solventes. O DAPRO® NA 1622 é facilmente incorporado em revestimentos e tintas a base...veja mais O DAPRO® NA 1622 é um desespumante líquido de silicone modificado para uso em sistemas de solventes. Possui excelentes propriedades anti-espumantes em vários sistemas de solventes. O DAPRO® NA 1622 é facilmente incorporado em revestimentos e tintas a base de solventes veja menos | |
| DAPRO® U-99 | Elementis | O DAPRO® U-99 é um modificador de tensão interfacial de alta performance projetado para uso em níveis relativamente baixos para eliminar ou reduzir os defeitos dos filmes. É especificamente eficiente em sistemas epoxi de dois componentes a base de solvent...veja mais O DAPRO® U-99 é um modificador de tensão interfacial de alta performance projetado para uso em níveis relativamente baixos para eliminar ou reduzir os defeitos dos filmes. É especificamente eficiente em sistemas epoxi de dois componentes a base de solventes bem como em sistemas alquidicos baseados em solvente e água e revestimentos decorativos. veja menos | |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...veja mais DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. veja menos | |
| DAPRO® W-95HS | Elementis | O DAPRO® W-95HS é um modificador de tensão de superfície para sistemas a base de água. Este produto melhora as propriedades de fluxo e nivelamento dos revestimentos e tintas. | |
| DDSA | Univar Solutions | DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fu...veja mais DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fuels and lubricating oils. veja menos | |
| Decabromodiphenyl Oxide | Chemceed | Óxido de decabromodifenílico é usado como um retardador para elastômeros, fios e cabos, revestimentos têxteis, equipamentos elétricos e eletrônicos, peças automotivas e materiais de construção. | |
| Decoupage MNP | Univar Solutions | Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage co...veja mais Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage coating. Decoupage MNP can also be used in other nonylphenol applications where color stability is of prime importance. veja menos | |
| DEE FO® 1015 | Munzing Chemie | DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and a...veja mais DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and adhesives. veja menos | |
| DEE FO® 3010E/50 | Munzing Chemie | DEE FO® 3010E/50 is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, and mineral oil. It is an effective defoamer for printing inks as it provides good initial foam knockdown when used as a press-die defoamer. It is c...veja mais DEE FO® 3010E/50 is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, and mineral oil. It is an effective defoamer for printing inks as it provides good initial foam knockdown when used as a press-die defoamer. It is commonly used for corrugated, film and foil, press-side and screen ink printing inks. veja menos | |
| DEE FO® 718 | Munzing Chemie | DEE FO® 718 is a liquid transparent gold-tinted defoamer for aqueous systems. It has good efficiency, persistence, and ease of incorporation and is commonly used for printing press applications and flexographic news inks. | |
| DEE FO® 725E | Munzing Chemie | DEE FO® 725E is a liquid transparent yellow defoamer that is a blend of glycols and polysiloxane. It is a multi-purpose printing ink and general coatings defoamer that has good dispersion and persistence. It is commonly used in architectural, industrial, ...veja mais DEE FO® 725E is a liquid transparent yellow defoamer that is a blend of glycols and polysiloxane. It is a multi-purpose printing ink and general coatings defoamer that has good dispersion and persistence. It is commonly used in architectural, industrial, and wood coatings, and corrugated printing ink. veja menos | |
| DEE FO® PG-2 | Munzing Chemie | DEE FO® PG-2 is a liquid off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It has good foam control during letdown and is commonly used in the pigment grinding process for ink applications and high performance co...veja mais DEE FO® PG-2 is a liquid off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It has good foam control during letdown and is commonly used in the pigment grinding process for ink applications and high performance coatings. veja menos | |
| DEE FO® PG-20 | Munzing Chemie | DEE FO® PG-20 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink applications that reduces process foam in all color dispersions that helps increas...veja mais DEE FO® PG-20 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink applications that reduces process foam in all color dispersions that helps increase filling and color strength. It is commonly used in high performance coatings and water-based inks. veja menos | |
| DEE FO® PG-30 | Munzing Chemie | DEE FO® PG-30 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink application that helps increase filling and color strength. It is commonly used du...veja mais DEE FO® PG-30 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink application that helps increase filling and color strength. It is commonly used during pigment grinding for TiO2, color, black and universal colorants. veja menos | |
| DEE FO® PI-12 | Munzing Chemie | DEE FO® PI-12 is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica, polyoxyalkylene technology and mineral oil. It is a good foam control additive that is designed for OPV and printing inks, such as corrugated, coated pape...veja mais DEE FO® PI-12 is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica, polyoxyalkylene technology and mineral oil. It is a good foam control additive that is designed for OPV and printing inks, such as corrugated, coated paper, packaging, film and foil. veja menos | |
| DEE FO® PI-16P | Munzing Chemie | DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations....veja mais DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations. It is commonly used in corrugated, envelope, film and foil, and metallic printing inks, and can be used in PVOH adhesives. veja menos | |
| DEE FO® PI-320 | Munzing Chemie | DEE FO® PI-320 is a liquid opaque white colored defoamer that is a blend of 3-Dimensional siloxane and polyoxyalkylene technology. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used as a corrugated, flexible packagi...veja mais DEE FO® PI-320 is a liquid opaque white colored defoamer that is a blend of 3-Dimensional siloxane and polyoxyalkylene technology. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used as a corrugated, flexible packaging, and film and foil printing inks, as well as OPV's and clear, wood, top, high gloss architectural and industrial spray coatings. veja menos | |
| DEE FO® PI-35 | Munzing Chemie | DEE FO® PI-35 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used during the grind stage, as a press-side defoamer and d...veja mais DEE FO® PI-35 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used during the grind stage, as a press-side defoamer and during final ink formulations of various printing inks. It is commonly used in most corrugated, packaging, envelope, metallic inks, news inks, and coatings for flooring. veja menos | |
| DEE FO® PI-40 | Munzing Chemie | DEE FO® PI-40 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is commonly used in combination with defoaming persistence and pinhole free substrate wetting. It is commonly used in printing ink application...veja mais DEE FO® PI-40 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is commonly used in combination with defoaming persistence and pinhole free substrate wetting. It is commonly used in printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. It is also used in OPV, emulsion polymers, industrial paints, wood coatings, and adhesives. veja menos | |
| DEE FO® PI-45 | Munzing Chemie | DEE FO® PI-45 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a defoamer for aqueous systems that is commonly used in news printing inks and in color printing inks during the pigment grinding process. | |
| DEE FO® PI-547 | Munzing Chemie | DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids c...veja mais DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids content coatings and printing ink. It is also used for aqueous ink systems include flexible film, OPV and metallic. veja menos | |
| DEE FO® PI-75 | Munzing Chemie | DEE FO® PI-75 is a liquid light yellow defoamer that is a blend of 3-Dimensional siloxane, organo-modified siloxane and water. It is a defoamer for aqueous systems that is a combination of defoaming performance and error-free substrate wetting in OPV and ...veja mais DEE FO® PI-75 is a liquid light yellow defoamer that is a blend of 3-Dimensional siloxane, organo-modified siloxane and water. It is a defoamer for aqueous systems that is a combination of defoaming performance and error-free substrate wetting in OPV and most printing ink applications. It is commonly used in corrugated, packaging, envelope, film and foil, and news ink formulations. veja menos | |
| DEE FO® XRM-1537A | Munzing Chemie | DEE FO® XRM-1537A is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, mineral oil and water. It is a defoamer for aqueous systems that has a unique and easily applied printing ink defoamer specifically designed for pr...veja mais DEE FO® XRM-1537A is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, mineral oil and water. It is a defoamer for aqueous systems that has a unique and easily applied printing ink defoamer specifically designed for press-side use. veja menos | |
| DEE FO® XRM-1547A | Munzing Chemie | DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV sys...veja mais DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV systems. It is also commonly used in printing ink formulations, such as film/foil, envelope and metallic. veja menos | |
| Dehydrated Castor Fatty Acid - H Grade | Alnor Oil Company, Inc. | Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for us...veja mais Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for use in a wide range of applications. veja menos | |
| Dehydrated Castor Fatty Acid - L Grade | Alnor Oil Company, Inc. | Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for us...veja mais Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for use in a wide range of applications. veja menos | |
| Denatonium Benzoate, 20% in EG | Chemceed | Benzoato de denatônio é um agente amargo que é usado para dar um gosto amargo nos produtos tóxicos para tornar mais difícil a ingestão do produto. Exemplos de produtos que contêm benzoato de denatônio são anticongelantes, detergentes, produtos de limpeza ...veja mais Benzoato de denatônio é um agente amargo que é usado para dar um gosto amargo nos produtos tóxicos para tornar mais difícil a ingestão do produto. Exemplos de produtos que contêm benzoato de denatônio são anticongelantes, detergentes, produtos de limpeza de pisos, removedores de tintas e produtos de limpeza de banheiros. veja menos | |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...veja mais Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. veja menos | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...veja mais Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. veja menos | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...veja mais Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. veja menos | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...veja mais Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. veja menos | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...veja mais Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. veja menos | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...veja mais Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. veja menos | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...veja mais Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. veja menos | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...veja mais Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. veja menos | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...veja mais Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. veja menos | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...veja mais Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. veja menos | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...veja mais Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. veja menos | Request Sample |
| Dibasic Ester | Henan Harvest Chem Co., LTD. | Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vesse...veja mais Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vessel/can coating, metal furniture coating, insulating coating, printing ink and resin applications. veja menos | |
| Dibutyl Phthalate (DBP) | Chemceed | Dibutilftalato (DBP) é um plastificante usado em aplicações como tintas de impressão, vernizes e adesivos. Ftalato de dibutilo pode ser usado como um plastificante secundário com outros ftalatos para compostos de PVC de alta concentração. | |
| Dimethyl Sebacate (DMS) | Chemceed | Sebacato de dimetilo (DMS) é um plastificante para nitrocelulose, borracha e resinas vinílicas. Sebacato de dimetilo é usado na produção de estabilizadores de luz que são utilizados nos revestimentos para proteger as superfícies e os pigmentos contra foto...veja mais Sebacato de dimetilo (DMS) é um plastificante para nitrocelulose, borracha e resinas vinílicas. Sebacato de dimetilo é usado na produção de estabilizadores de luz que são utilizados nos revestimentos para proteger as superfícies e os pigmentos contra fotodegradação pela desativação de radicais livres. Sebacato de dimetilo também pode ser usado como um solvente para resinas e borrachas. Nas tintas e nos revestimentos, DMS pode suavizar os aglutinantes para melhorar a flexibilidade. veja menos | |
| Dioctyl Sebacate (DOS) | Chemceed | Sebacato de dioctil (DOS) é um plastificante de ftalatos utilizado para PVC, nitroceluloses, resinas de estireno e borrachas sintéticas onde é necessário o desempenho de baixa temperatura. É solúvel em hidrocarboneto, álcool, éster, clorocarbono, éter, be...veja mais Sebacato de dioctil (DOS) é um plastificante de ftalatos utilizado para PVC, nitroceluloses, resinas de estireno e borrachas sintéticas onde é necessário o desempenho de baixa temperatura. É solúvel em hidrocarboneto, álcool, éster, clorocarbono, éter, benzeno e outros solventes orgânicos. DOS é recomendado para o uso em adesivos e selantes. veja menos | |
| Dioctyl Terephthalate (DOTP) | Chemceed | Tereftalato dioctil (DOTP) é um plastificante de uso geral e pode ser usado como um substituto de ftalato. Como um plastificante de PVC, DOTP é usado nas formulações de tintas de impressão de tela. Além disso, DOTP pode ser usado em aplicações como tintas...veja mais Tereftalato dioctil (DOTP) é um plastificante de uso geral e pode ser usado como um substituto de ftalato. Como um plastificante de PVC, DOTP é usado nas formulações de tintas de impressão de tela. Além disso, DOTP pode ser usado em aplicações como tintas, vernizes, adesivos e selantes. veja menos | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| DISPERBYK®-108 FOR INKS | BYK | It is a wetting and dispersing additive for solvent-borne printing inks. Applications include gravure inks, flexographic inks, and silk screen printing inks. | |
| DISPERBYK®-110 FOR INKS | BYK | A wetting and dispersing additive for aqueous and solvent-borne printing inks. Solution of a copolymer with acidic groups. | |
| DISPERBYK®-111 FOR INKS | BYK | A wetting and dispersing additive for aqueous and solvent-borne printing inks. Copolymer with acidic groups. | |
| DISPERBYK®-118 | BYK | O DISPERBYK®-118 é um aditivo umectante e dispersante para sistemas à base de solvente para estabilizar dióxidos de ácidos, neutros e básicos de titânio, pigmentos inorgânicos coloridos, óxidos de ferro transparentes, preenchedores e pigmentos de efeito. ...veja mais O DISPERBYK®-118 é um aditivo umectante e dispersante para sistemas à base de solvente para estabilizar dióxidos de ácidos, neutros e básicos de titânio, pigmentos inorgânicos coloridos, óxidos de ferro transparentes, preenchedores e pigmentos de efeito. O aditivo melhora o umedecimento e a dispersão de todos os agentes de preenchimento inorgânicos, tais como carbonato de cálcio e hidróxido de alumínio (ATH). O DISPERBYK®-118 é um multifinalidade para dióxidos de titânio. O aditivo produz uma viscosidade mais baixa e permite uma maior carga de preenchimento. veja menos | |
| DISPERBYK®-142 | BYK | Aditivo de umedecimento e dispersão de alto peso molecular, para sistemas à base de solvente. Solução de um sal de éster de ácido fosfórico de um copolímero de alto peso molecular com grupos afínicos do pigmentos. | |
| DISPERBYK®-162 FOR INKS | BYK | A high molecular weight wetting and dispersing additive for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK®-163 FOR INKS | BYK | A high molecular weight wetting and dispersing additive for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK®-168 FOR INKS | BYK | High molecular weight wetting and dispersing additives for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK-168 TF | BYK | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | |
| DISPERBYK®-180 FOR INKS | BYK | A wetting and dispersing additive for aqueous and solvent-borne printing inks. Alkylolammonium salt of a copolymer with acidic groups. | |
| DISPERBYK®-181 FOR INKS | BYK | A wetting additive for aqueous printing inks. Solution of an alkylolammonium salt of a polyfunctional polymer. | |
| DISPERBYK®-182 FOR INKS | BYK | High molecular weight wetting and dispersing additive for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK®-184 FOR INKS | BYK | High molecular weight wetting and dispersing additive aqueous and solvent-borne printing inks and pigment concentrates. Solutions of high molecular weight block copolymers with pigment affinic groups | |
| DISPERBYK®-190 FOR INKS | BYK | Hhigh molecular weight wetting and dispersing additive for aqueous and solvent-borne printing inks and pigment concentrates. Solutions of high molecular weight block copolymers with pigment affinic groups. | |
| DISPERBYK®-192 FOR INKS | BYK | A wetting and dispersing additive for aqueous printing inks and pigment concentrates. Copolymer with pigment affinic groups. | |
| DISPERBYK®-193 FOR INKS | BYK | It is a high molecular weight wetting and dispersing additive for resin based aqueous printing inks and pigment concentrates that is recommended for gravure inks, flexographic inks, and silk screen printing inks. | |
| DISPERBYK®-2001 | BYK | Aditivo de umedecimento e dispersão de alto peso molecular, para sistemas à base de solvente. Copolímeros em bloco de acrilato modificado. | |
| DISPERBYK®-2012 | BYK | DISPERBYK-2012 é adequado para trituração com e sem resina. O aditivo é compatível com uma vasta gama de resinas solúveis em água, emulsões e dispersões. Este aditivo de alto peso molecular causa a defloculação dos pigmentos através de estabilização estér...veja mais DISPERBYK-2012 é adequado para trituração com e sem resina. O aditivo é compatível com uma vasta gama de resinas solúveis em água, emulsões e dispersões. Este aditivo de alto peso molecular causa a defloculação dos pigmentos através de estabilização estérica. Portanto, firmeza de cor, transparência, brilho e estabilidade de armazenamento dos concentrados de pigmentos são melhorados. veja menos | |
| DISPERBYK-2014 | BYK | DISPERBYK-2014 is a 100% solvent-free wetting and dispersing additive for solvent-borne, solvent-free, aqueous and UV coatings, as well as for aqueous printing inks and inkjet inks. | |
| DISPERBYK®-2018 | BYK | DISPERBYK®-2018 is a VOC- and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, adhesives, and pigment concentrates. | |
| DISPERBYK®-2019 | BYK | DISPERBYK®-2019 is a VOC and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, and pigment concentrates. | |
| DISPERBYK-2155 TF | BYK | DISPERBYK-2155 TF is a VOC- and solvent-free wetting and dispersing additive for solvent-borne and solvent-free coating systems, floor coatings, and printing inks. Particularly recommended for the manufacture of pigment concentrates with broad compatibili...veja mais DISPERBYK-2155 TF is a VOC- and solvent-free wetting and dispersing additive for solvent-borne and solvent-free coating systems, floor coatings, and printing inks. Particularly recommended for the manufacture of pigment concentrates with broad compatibility. The 100 % active substance makes it particularly suitable for high-solid and solvent-free systems. DISPERBYK-2155 TF is the tin-free variant of DISPERBYK-2155. veja menos | |
| DISPERBYK®-FOR INKS | BYK | A wetting additive for aqueous printing inks. Solution of an alkylolammonium salt of a lower molecular weight polycarboxylic acid polymer. | |
| Dispersion Agent BLK-9918 | BELIKE Chemical Co.,Ltd. | Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins. | |
| DMAMP-80 | Univar Solutions | DMAMP-80 is one of the strongest tertiary amino alcohols commercially available, which can be used in water based systems to provide exceptional clarity, wettability and stability. | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...veja mais Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. veja menos | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...veja mais Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). veja menos | |
| Dow Corning® 1250 Surfactant | Univar Solutions | Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthe...veja mais Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthetic leathers. veja menos | |
| Dow Corning® 26 Additive | Univar Solutions | Dow Corning® 26 Additive is a leveling and wetting agent for solvent-based coatings and inks. It is a low-viscosity, 100% silicone fluid containing no solvents. | |
| Dow Corning® 550 Fluid | Univar Solutions | Dow Corning® 550 Fluid is a trimethyl-terminated dimethyl, phenylmethyl siloxane fluid. It offers excellent heat transfer characteristics, good compressibility, and good oxidation and thermal stability. | |
| DOWSIL™ 100F Additive | Dow Performance Silicones | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...veja mais Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. veja menos | |
| DOWSIL™ 100F Additive | Univar Solutions | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...veja mais Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. veja menos | |
| DOWSIL™ 11 Additive | Univar Solutions | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...veja mais Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. veja menos | |
| DOWSIL™ 163 Additive | Dow Performance Silicones | Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% activ...veja mais Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. veja menos | |
| DOWSIL™ 163 Additive | Univar Solutions | Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% activ...veja mais Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. veja menos | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...veja mais Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. veja menos | |
| DOWSIL™ 205SL Additive | Univar Solutions | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...veja mais Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. veja menos |
