| 3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M c...veja mais 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-210 are typically chosen over other 3M ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. veja menos | |
| 3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler load...veja mais 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-410 are typically chosen over other 3M ceramic microspheres for their overall balance in properties. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. veja menos | |
| 3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic m...veja mais 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. veja menos | |
| AC-67 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...veja mais AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. veja menos | |
| ADDAPT® SilStab HL+ | ADDAPT Chemicals BV | ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preserva...veja mais ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preservatives. veja menos | |
| ADDAPT® SilStab L 100 | ADDAPT Chemicals BV | ADDAPT® SilStab L 100 is a solvent-free, stabilized potassium silicate solution in water. It is added to interior and exterior coatings as well as textured masonry coatings. This product is non-foaming, free of preservatives, and has anti-corrosion proper...veja mais ADDAPT® SilStab L 100 is a solvent-free, stabilized potassium silicate solution in water. It is added to interior and exterior coatings as well as textured masonry coatings. This product is non-foaming, free of preservatives, and has anti-corrosion properties when applied to ferrous surfaces. The high stability of ADDAPT® SilStab L 100 allows it to be added to coatings without causing coagulation, and no additional stabilizing additives are necessary. veja menos | |
| ADDAPT® SilStab L 50 | ADDAPT Chemicals BV | ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be ad...veja mais ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be added to coatings without causing coagulation. veja menos | |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM é uma SILFIT Z ativado 91, produzido pela modificação da superfície com silano funciona lamino . É usado como um preenchimento funcional, por conta própria ou combinado com extensores ou agentes de fosqueamento. Um efeito ótimo será obtido em e...veja mais AKTIFIT AM é uma SILFIT Z ativado 91, produzido pela modificação da superfície com silano funciona lamino . É usado como um preenchimento funcional, por conta própria ou combinado com extensores ou agentes de fosqueamento. Um efeito ótimo será obtido em elastômeros polares em combinação com enxofre ou contribuintes de enxofre, amina ou sistemas de reticulação bisfenolica. Pode ser usado sempre que elevada resistência à tração e módulo, combinada com uma tração muito baixa e um conjunto de compressão, que são tão importantes quanto suas excelentes propriedades de processamento e de extrusão. veja menos | |
| AKTIFIT PF 111 | Hoffmann Mineral | AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...veja mais AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). veja menos | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...veja mais AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). veja menos | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM é um SILFIT Z 91 ativado que pode ser usado como um material de preenchimento funcional, por conta própria ou combinado com extensores ou agentes de fosqueamento. O melhor efeito é obtido em sistemas de ligantes que polimerizam ou curam devido...veja mais AKTIFIT VM é um SILFIT Z 91 ativado que pode ser usado como um material de preenchimento funcional, por conta própria ou combinado com extensores ou agentes de fosqueamento. O melhor efeito é obtido em sistemas de ligantes que polimerizam ou curam devido a uma reação iniciada de maneira radical. veja menos | |
| AKTISIL AM | Hoffmann Mineral | Um SILLITIN Z 86 ativado, produzido pela modificação da superfície com amino silano funcional. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| AKTISIL MAM | Hoffmann Mineral | Um SILLITIN V 88 ativado, produzido pela modificação da superfície com 3-metacriloxipropil-trimetoxi-silano. Pode ser utilizado como um enchimento (filler) funcional sózinho ou combinado com extensores ou agentes de alisamento. | |
| AKTISIL MAM-R | Hoffmann Mineral | Um SILLITIN ativado V 85, produzido pela modificação da superfície com 3-metacriloxipropil-trimetoxi-silano. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| AKTISIL PF 777 | Hoffmann Mineral | Um SILLITIN Z 86 ativado, produzido pela modificação da superfície com silano alquilo. Utilizado como um enchimento (filler) funcional só, por si mesmo, ou em combinação com aditivos reológicos e/ou agentes de alisamento. | |
| AKTISIL VM 56 | Hoffmann Mineral | Um SILLITIN Z 86 ativado, produzido pela modificação da superfície com vinil-trietoxi-silano. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| AKTISIL VM 56/89 | Hoffmann Mineral | AKTISIL VM 56/89 é um SILLITIN Z 89 ativado produzido pela modificação da superfície com silano 3-Vinyltriethoxy . Usado como carga funcional por conta própria ou combinado com extensores ou agentes de alisamento. | |
| CAB-O-SIL® L90 | Univar Solutions | CAB-O-SIL® L90 is a low surface area fumed silica. It is untreated and provides rheology control and reinforcement for silicone sealants and elastomer applications. It is the most easily dispersed of Cabot’s untreated fumed silicas. | Request Sample |
| Coattun S.PR.C150 | Kaltun Mining Co. | Coattun S.PR.C150 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has a hardness of 6mohs and a density of 2.6g/cm3. | |
| Coattun S.PR.C25 | Kaltun Mining Co. | Coattun S.PR.C25 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 27g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C3 | Kaltun Mining Co. | Coattun S.PR.C3 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 37g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C30 | Kaltun Mining Co. | Coattun S.PR.C30 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 25g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C300 | Kaltun Mining Co. | Coattun S.PR.C300 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has a hardness of 6mohs and a density of 2.60g/cm3. | |
| Coattun S.PR.C5 | Kaltun Mining Co. | Coattun S.PR.C5 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 31g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C50 | Kaltun Mining Co. | Coattun S.PR.C50 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 22g/100g and a density of 2.60g/cm3. | |
| CS Glass Powder CS-200 | Vitro Minerals | CS Glass Powder CS-200 is a functional glass filler and extender made from 100% recycled glass. Providing good abrasion resistance and chemical stability, this product is ideal for use in coatings, sealants, and other polymer-based systems where high brig...veja mais CS Glass Powder CS-200 is a functional glass filler and extender made from 100% recycled glass. Providing good abrasion resistance and chemical stability, this product is ideal for use in coatings, sealants, and other polymer-based systems where high brightness is not required. veja menos | |
| CS Glass Powder CS-325 | Vitro Minerals | CS Glass Powder CS-325 is a functional glass filler and extender made from 100% recycled glass. Providing good abrasion resistance and chemical stability, this product is ideal for use in coatings, sealants, and other polymer-based systems where high brig...veja mais CS Glass Powder CS-325 is a functional glass filler and extender made from 100% recycled glass. Providing good abrasion resistance and chemical stability, this product is ideal for use in coatings, sealants, and other polymer-based systems where high brightness is not required. veja menos | |
| CS Glass Powder CS-400 | Vitro Minerals | CS Glass Powder CS-400 is a functional glass filler and extender made from 100% recycled glass. Providing good abrasion resistance and chemical stability, this product is ideal for use in coatings, sealants, and other polymer-based systems where high brig...veja mais CS Glass Powder CS-400 is a functional glass filler and extender made from 100% recycled glass. Providing good abrasion resistance and chemical stability, this product is ideal for use in coatings, sealants, and other polymer-based systems where high brightness is not required. veja menos | |
| Feldspar | Provencale S.A. | Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plast...veja mais Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plastic films. It is mostly a potash feldspar that has been processed and separated by a screening technique that includes classification and micro-grinding. veja menos | |
| Fumed Silica | Yantai Suny Chem International Co., Ltd. | Fumed Silica é amplamente usado em borracha de silicone, selantes de construção, revestimento, e nos setores de eletrônica e elétrica, aeroespacial, medicina e materiais médicos, processamento de resina, tinta de impressão, pesticidas, entre outros setore...veja mais Fumed Silica é amplamente usado em borracha de silicone, selantes de construção, revestimento, e nos setores de eletrônica e elétrica, aeroespacial, medicina e materiais médicos, processamento de resina, tinta de impressão, pesticidas, entre outros setores. É insolúvel em todos os tipos de solventes e fluidos, exceto o ácido fluorídrico e bases concentradas. veja menos | |
| Gasil® 200DF | PQ Corporation | Gasil® 200DF is a fine particle silica gel with exceptional moisture adsorption properties suitable for use in drafting film coatings or as a degassing agent in aluminum based coatings. | |
| Gasil® 23D | PQ Corporation | Gasil® 23D is a synthetic amorphous silica. Used in primer coats of Diazo papers, to provide absorptive layer for active chemicals. Thickening agent and viscosity modifier. Antiblocking of high clarity polypropylene and PVC films. Anti-caking agent for f...veja mais Gasil® 23D is a synthetic amorphous silica. Used in primer coats of Diazo papers, to provide absorptive layer for active chemicals. Thickening agent and viscosity modifier. Antiblocking of high clarity polypropylene and PVC films. Anti-caking agent for foods, pharmaceuticals and fine powders. veja menos | |
| Gasil® 23F | PQ Corporation | Gasil® 23F is a high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented, water based coatings and printing inks. | |
| Gasil® GM2 | PQ Corporation | Gasil® GM2 is a silica gel specifically designed as a moisture scavenger / degassing agent for aluminum paints and as a free-flow agent in powder coatings. | |
| Gasil® HP210 | PQ Corporation | Gasil® HP210 is a high performance organically treated silica gel specifically designed as an effective matting agent for solvent based clear systems such as wood flooring, furniture, decorative and general industrial. | |
| Gasil® HP230 | PQ Corporation | Gasil® HP230 is a synthetic amorphous silica. It is used as a matting agent for thin film industrial coatings, inks and high transparency water-based coatings. Gasil® HP230 is a fine, light powder and care should be taken to avoid inhaling it. Face masks ...veja mais Gasil® HP230 is a synthetic amorphous silica. It is used as a matting agent for thin film industrial coatings, inks and high transparency water-based coatings. Gasil® HP230 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. veja menos | |
| Gasil® HP260 | PQ Corporation | Gasil® HP260 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. It provides excellent matting efficiency combined with minimal ...veja mais Gasil® HP260 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties in thin film applications. veja menos | |
| Gasil® HP270 | PQ Corporation | Gasil® HP270 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. | |
| Gasil® HP280 | PQ Corporation | Gasil® HP280 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. This product provides excellent matting efficiency combined wit...veja mais Gasil® HP280 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. This product provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. veja menos | |
| Gasil® HP380 | PQ Corporation | Gasil® HP380 is a new PQ matting agent specially designed for the effective gloss reduction of Wood and Plastic Coatings. Formulations based on resins dissolved in organic solvents, dispersed in water or UV curable are all used in this sector depending on...veja mais Gasil® HP380 is a new PQ matting agent specially designed for the effective gloss reduction of Wood and Plastic Coatings. Formulations based on resins dissolved in organic solvents, dispersed in water or UV curable are all used in this sector depending on the performance requirements of the final coated component, its cost and the local legislation. Gasil® HP380 has displayed excellent weight effectiveness in most systems in which it has been tested. veja menos | |
| Gasil® HP39 | PQ Corporation | Gasil® HP39 is a large particle, high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented water based coatings. It provides excellent matting efficiency combined with minimal effect on clarity and...veja mais Gasil® HP39 is a large particle, high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented water based coatings. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. veja menos | |
| Gasil® HP710 | PQ Corporation | Gasil® HP710 is a synthetic amorphous silica. It can be used as a matting agent suitable for high solids and waterborne coatings with excellent performances in 100% UV curable formulations. | |
| Gasil® HP860 | PQ Corporation | Gasil® HP860 is a fine particle, high performance, organically treated silica gel specifically designed as an effective matting agent for solvent based coatings such as wood flooring and furniture. | |
| Gasil® HP880 | PQ Corporation | Gasil® HP880 is a large particle, high performance, organically treated silica gel specifically designed for solvent based coatings such as wood flooring and furniture. Use of Gasil® HP880 has benefits of optimal matting efficiency from ultra high pore vo...veja mais Gasil® HP880 is a large particle, high performance, organically treated silica gel specifically designed for solvent based coatings such as wood flooring and furniture. Use of Gasil® HP880 has benefits of optimal matting efficiency from ultra high pore volume and controlled particle size distribution. Suitable in acetone rich systems, has ease of dispersion and film clarity while also allowing for raw material cost savings. veja menos | |
| Gasil® UV70C | PQ Corporation | Gasil® UV70C is an organically treated silica gel specifically designed as an effective matting agent for 100% solids UV curable coatings for wood, plastic and graphic industry. Gasil® UV70C provides excellent matting efficiency combined with minimal effe...veja mais Gasil® UV70C is an organically treated silica gel specifically designed as an effective matting agent for 100% solids UV curable coatings for wood, plastic and graphic industry. Gasil® UV70C provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. veja menos | |
| Gasil® XE3100 | PQ Corporation | Gasil® XE3100 is a synthetic amorphous silica. It is used as an ultra high efficient silica matting agent. This product is suitable for wood, coil, and general industrial coatings. It performs well in waterbased formulations. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...veja mais HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. veja menos | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...veja mais HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. veja menos | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...veja mais HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. veja menos | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...veja mais HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. veja menos | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...veja mais HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. veja menos | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...veja mais HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. veja menos | |
| IMSIL® 1240 | Sibelco | IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durabi...veja mais IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.2 microns. veja menos | |
| IMSIL® A-10 | Sibelco | IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability ov...veja mais IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 2.4 microns. veja menos | |
| IMSIL® A-15 | Sibelco | IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, dura...veja mais IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 3.5 microns. veja menos | |
| IMSIL® A-25 | Sibelco | IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...veja mais IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 5.0 microns. veja menos | |
| IMSIL® A-30 | Sibelco | IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...veja mais IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 8.1 microns. veja menos | |
| IMSIL® A-45 | Sibelco | IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...veja mais IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.7 microns. veja menos | |
| IMSIL® A-75 | Sibelco | IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weatherin...veja mais IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 11.3 microns. veja menos | |
| IMSIL® A-8 | Sibelco | IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering...veja mais IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 2.1 microns. veja menos | |
| Kaoflor® 20 A | Minerals Girona S.A. | O Kaoflor® 20 A é um preenchedor de Koalin de alumínio hidrossilicato. Sua brancura e abrasividade ow o tornam um dos mais notáveis kaolins, adequado para as indústrias de tintas e borrachas. Possui uma absorção de óleo de 60g/100g e um corte superior de ...veja mais O Kaoflor® 20 A é um preenchedor de Koalin de alumínio hidrossilicato. Sua brancura e abrasividade ow o tornam um dos mais notáveis kaolins, adequado para as indústrias de tintas e borrachas. Possui uma absorção de óleo de 60g/100g e um corte superior de 20µm. veja menos | |
| Kaoflor® 20 B | Minerals Girona S.A. | O Kaoflor® 20 B é um preenchedor de Koalin de alumínio hidrossilicato. Sua brancura e abrasividade ow o tornam um dos mais notáveis kaolins, adequado para as indústrias de tintas e borrachas. Possui um DOP de absorção de óleo de 60g/100g e um corte superi...veja mais O Kaoflor® 20 B é um preenchedor de Koalin de alumínio hidrossilicato. Sua brancura e abrasividade ow o tornam um dos mais notáveis kaolins, adequado para as indústrias de tintas e borrachas. Possui um DOP de absorção de óleo de 60g/100g e um corte superior de 20µm. veja menos | |
| Kaoflor® 30 B | Minerals Girona S.A. | O Kaoflor® 30 B é um preenchedor de Koalin de alumínio hidrossilicato. Sua brancura e abrasividade ow o tornam um dos mais notáveis kaolins, adequado para as indústrias de tintas e borrachas. Possui uma absorção de óleo de 58g/100g e um corte superior de ...veja mais O Kaoflor® 30 B é um preenchedor de Koalin de alumínio hidrossilicato. Sua brancura e abrasividade ow o tornam um dos mais notáveis kaolins, adequado para as indústrias de tintas e borrachas. Possui uma absorção de óleo de 58g/100g e um corte superior de 30µm. veja menos | |
| LA Glass Powder 300 | Vitro Minerals | LA Glass Powder 300 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, co...veja mais LA Glass Powder 300 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, coatings, and adhesives. veja menos | |
| LA Glass Powder 350 | Vitro Minerals | LA Glass Powder 350 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, co...veja mais LA Glass Powder 350 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, coatings, and adhesives. veja menos | |
| LA Glass Powder 400 | Vitro Minerals | LA Glass Powder 400 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, co...veja mais LA Glass Powder 400 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, coatings, and adhesives. veja menos | |
| LA Glass Powder 500 | Vitro Minerals | LA Glass Powder 500 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, co...veja mais LA Glass Powder 500 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, coatings, and adhesives. veja menos | |
| LA Glass Powder 600 | Vitro Minerals | LA Glass Powder 600 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, co...veja mais LA Glass Powder 600 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, coatings, and adhesives. veja menos | |
| LA Glass Powder 700 | Vitro Minerals | LA Glass Powder 700 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, co...veja mais LA Glass Powder 700 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, coatings, and adhesives. veja menos | |
| LA Glass Powder 800 | Vitro Minerals | LA Glass Powder 800 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, co...veja mais LA Glass Powder 800 is a functional filler and extender produced from clean, post-industrial glass feedstocks. Resistant to blooming, blistering, and chemical degradation in harsh environments, this product is ideal for use in a wide variety of paints, coatings, and adhesives. veja menos | |
| LA-300 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...veja mais LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (22). LA-300 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. veja menos | |
| LA-350 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...veja mais LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (23). LA-350 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. veja menos | |
| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...veja mais LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. veja menos | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...veja mais LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. veja menos | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...veja mais LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. veja menos | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...veja mais LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. veja menos | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...veja mais LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. veja menos | |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...veja mais LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. veja menos | Request Sample |
| MCF - Vermiculite | Micronized Products | MCF - Vermiculite is an asbestos-free blend of vermiculite and other phyllosilicate and silicate mineral powders. This product is most commonly used in specialty paint formulation applications. | |
| Micaflor® MF 10 | Minerals Girona S.A. | O Micaflor® MF 10 é um silicato de potássio e alumínio (Mica) que, com rigorosas verificações através do processo de tratamento, incluindo o uso de separadores magnéticos de intensidade, possibilita oferecer uma muscovita que é ideal para uso em plásticos...veja mais O Micaflor® MF 10 é um silicato de potássio e alumínio (Mica) que, com rigorosas verificações através do processo de tratamento, incluindo o uso de separadores magnéticos de intensidade, possibilita oferecer uma muscovita que é ideal para uso em plásticos, tintas, soldas, etc. Este produto possui uma absorção de óleo de 82g/100g e um corte superior de 10µm. veja menos | |
| Micaflor® MF 150 | Minerals Girona S.A. | O Micaflor® MF 150 é um silicato de potássio e alumínio (Mica) que é ideal para uso em plásticos, tintas e soldas. Este produto possui um DOP de absorção de óleo de 70g/100g e um corte superior de 125µm. | |
| Micaflor® MF 25 | Minerals Girona S.A. | O Micaflor® MF 25 é um silicato de potássio e alumínio (Mica) que passou por rigorosas verificações através do processo de tratamento, incluindo o uso de separadores magnéticos de intensidade, tornando possível oferecer uma muscovita que é ideal para uso ...veja mais O Micaflor® MF 25 é um silicato de potássio e alumínio (Mica) que passou por rigorosas verificações através do processo de tratamento, incluindo o uso de separadores magnéticos de intensidade, tornando possível oferecer uma muscovita que é ideal para uso em plásticos, tintas e soldas. Possui uma absorção de óleo de 80g/100g e um corte superior de 25µm. veja menos | |
| Micaflor® MF 250 | Minerals Girona S.A. | O Micaflor® MF 250 é um silicato de potássio e alumínio (Mica) que é recomendado para uso em plásticos, tintas e eletrodos. Possui um DOP de absorção de óleo de 67g/100g e um corte superior de 150µm. | |
| Micaflor® MF 45 | Minerals Girona S.A. | O Micaflor® MF 45 é um silicato de potássio e alumínio (Mica) que é recomendado para uso em plásticos, tintas e eletrodos. Possui um DOP de absorção de óleo de 77g/100g e um corte superior de 40µm. | |
| Micaflor® MF 500 | Minerals Girona S.A. | O Micaflor® MF 500é um silicato de potássio e alumínio (Mica) que é recomendado para uso em plásticos, tintas e eletrodos. Possui um DOP de absorção de óleo de 52g/100g e um corte superior de 500µm. | |
| Micaflor® MF 75 | Minerals Girona S.A. | O Micaflor® MF 75 é um silicato de potássio e alumínio (Mica) que é ideal para uso em plásticos, tintas e eletrodos. Possui um DOP de absorção de óleo de 77g/100g e um corte superior de 60µm. | |
| Microbrite 10 | Micronized Products | Microbrite 10 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 21%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Micro...veja mais Microbrite 10 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 21%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 10 is most commonly used as a filler/extender in coating applications. veja menos | |
| Microbrite 15 | Micronized Products | Microbrite 15 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 17%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Micro...veja mais Microbrite 15 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 17%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 15 is most commonly used as a filler/extender in coating applications. veja menos | |
| Microbrite 2 | Micronized Products | Microbrite 2 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 2 is most commonly used in c...veja mais Microbrite 2 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 2 is most commonly used in coating, adhesive, and mastic applications. veja menos | |
| Microbrite 5 | Micronized Products | Microbrite 5 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 20-22%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Mic...veja mais Microbrite 5 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 20-22%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 5 is most commonly used as a filler/extender in coating applications. veja menos | |
| Min-U-Gel® 400 | Active Minerals | Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal l...veja mais Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal lathe-shaped particles forming a very stable lattice structure that keeps liquids and particles more evenly dispersed and suspended. The uniformity it creates generates unique multi-functional performance benefits well beyond rheological properties, such as syneresis control, suspension, improved tint strength and hiding, reduced pigment flooding and in-can stability. veja menos | Request Sample |
| MINEX® 10 | Sibelco | MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product ha...veja mais MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 2.1 microns and is easily dispersed in all conventional vehicle systems. veja menos | |
| MINEX® 10 (Tamms, Il.) | Sibelco | MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...veja mais MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 2.1 microns. veja menos | |
| MINEX® 12 (Tamms, Il.) | Sibelco | MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...veja mais MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 1.5 microns and is easily dispersed in all conventional vehicle systems. veja menos | |
| MINEX® 2 | Sibelco | MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...veja mais MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 14.3 microns and is easily dispersed in all conventional vehicle systems. veja menos | |
| MINEX® 3 | Sibelco | MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...veja mais MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 10.8 microns. veja menos | |
| MINEX® 4 | Sibelco | MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...veja mais MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 6.8 microns. veja menos | |
| MINEX® 7 | Sibelco | MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...veja mais MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 3.5 microns and is easily dispersed in all conventional vehicle systems. veja menos |
