3126 Fast Red BBM | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3126 Fast Red BBM has a pH value of 7.0, oil absorption of equal to or less than 555, and a heat resistance of 200. It has recommended applications in PS, aqueous paints, water-based inks, and possible applications in PMMA and solvent-based paints. | |
3128 Permanent Red F5RK | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3128 Permanent Red F5RK has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in solvent-based paints, PS, AS, ABS, PMMA, and possible applications in offset ink, and solvent and w...veja mais 3128 Permanent Red F5RK has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in solvent-based paints, PS, AS, ABS, PMMA, and possible applications in offset ink, and solvent and water based inks. veja menos | |
313 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
313 R Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313 R Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
3135 Fast Red F2R | Hangzhou Jiekai Chemical Co., Ltd. | 3135 Fast Red F2R is a naphthol red pigment that can be used in aqueous inks and textile printing applications. This product's density is 1.7 g/cm3 and its pH value is 6.5. Its molecular weight is 436.29. | |
3136 Phthalo Green 36 | Lansco Colors | 3136 Phthalo Green 36 is a yellow shade fully brominated phthalocyanine green pigment with good tinting strength and color purity. This product is used in various coatings and water based inks. | |
313S Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313S Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
3150 Permanent Red FGR | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3150 Permanent Red FGR has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 150. It has recommended applications in aqueous paints, offset inks, solvent and water based inks, and possible applications in PS, AS, ABS,...veja mais 3150 Permanent Red FGR has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 150. It has recommended applications in aqueous paints, offset inks, solvent and water based inks, and possible applications in PS, AS, ABS, and PMMA. veja menos | |
318 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 318 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 95% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
329-A Chromium Oxide Green | Lansco Colors | 329-A Chromium Oxide Green is a clean, medium shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 329-A Chromium Oxide Green is used in coatings and is r...veja mais 329-A Chromium Oxide Green is a clean, medium shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 329-A Chromium Oxide Green is used in coatings and is recommended for the construction industry. veja menos | |
3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | Este é um elemento reticulador (cross-linker) para resinas de epoxi, elemento fundamental para poliamida e poliuretanos. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) é adequado para revestimentos de resina epoxi de dois-componentes, para adesivos e ...veja mais Este é um elemento reticulador (cross-linker) para resinas de epoxi, elemento fundamental para poliamida e poliuretanos. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) é adequado para revestimentos de resina epoxi de dois-componentes, para adesivos e compostos cola a base de epoxi. A estrutura hidrofóbica de 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) melhora a resistência hidrolítica, aumenta a reatividade e a compatibilidade em revestimentos com epoxi. veja menos | |
330 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 330 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 90% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
3320 Phthalo Green 7 | Lansco Colors | 3320 Phthalo Green 7 is a phthalocyanine medium-yellow shade pigment with good tinting values, color purity and a high degree of permanency. This product is used in UV and water based inks and coatings. | |
333 Chromium Oxide Green | Lansco Colors | 333 Chromium Oxide Green is a clean, light to medium shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 333 Chromium Oxide Green is used in coatings and...veja mais 333 Chromium Oxide Green is a clean, light to medium shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 333 Chromium Oxide Green is used in coatings and recommended for the construction industry. veja menos | |
(3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 | Zhejiang Feidian Chemical Co., Ltd. | FD-1001 é um silano de di-metoxi de metilo (3,3,3 tri fluoro propil). É fornecido como um líquido incolor. | |
3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) | Kowa American Corporation | 3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) is a low viscosity, low odor and excellent solvency monomer containing a light stable cyclic group. TMCHMA is useful in paints, adhesives, sealants, water treatment & other similar applications. TMCHMA provi...veja mais 3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) is a low viscosity, low odor and excellent solvency monomer containing a light stable cyclic group. TMCHMA is useful in paints, adhesives, sealants, water treatment & other similar applications. TMCHMA provides impact, chemical, water, weather & abrasion resistance as well as low shrinkage, thermal stability & adhesion. veja menos | Request Sample |
3,4 Dihydro-2-Methoxy-2H-Pyran | Puyang Shenghuade Chemical Co., Ltd. | 3,4 Dihydro-2-Methoxy-2H-Pyran is a liquid base product that is light yellow in color. This product has a boiling point at 126 ºC and a flash point at 16ºC. 3,4 Dihydro-2-Methoxy-2H-Pyran can be used in a variety of applications including paint and coatin...veja mais 3,4 Dihydro-2-Methoxy-2H-Pyran is a liquid base product that is light yellow in color. This product has a boiling point at 126 ºC and a flash point at 16ºC. 3,4 Dihydro-2-Methoxy-2H-Pyran can be used in a variety of applications including paint and coatings. veja menos | |
3,4-Epoxycyclohexylmethyl (3,4-epoxy) cyclohexane TTA2083 | PhibroChem | 3,4-Epoxycyclohexylmethyl (3,4-epoxy) cyclohexane TTA2083 is a pale yellow liquid produced through unsaturated groups oxidation which performs different reactivity, viscosity, and weatherability compared with general condensation either epoxy resins. This...veja mais 3,4-Epoxycyclohexylmethyl (3,4-epoxy) cyclohexane TTA2083 is a pale yellow liquid produced through unsaturated groups oxidation which performs different reactivity, viscosity, and weatherability compared with general condensation either epoxy resins. This product's main applications include epoxy active diluent, electrical parts packaging, coating, fiber reinforced composite, LED encapsulants, photo adhesive and curing products, as well as stabilizers and large electrical molds. veja menos | Request Sample |
3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to ...veja mais 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to the dual epoxide functionality which can react with hydroxyl, carboxyl or amine groups of polymers contained in the system. End uses take advantage of the UV stability and low viscosity compared to other epoxy resin. This grade has an assay of 90% min and a weight per epoxide of 131-143. veja menos | Request Sample |
3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21L | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21L is a pale yellow to colorless liquid that is part of Cycloaliphatic Epoxy Resin TTA21 Series. It is a general-purpose cycloaliphatic diepoxide used principally with polyacid and anhydride c...veja mais 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21L is a pale yellow to colorless liquid that is part of Cycloaliphatic Epoxy Resin TTA21 Series. It is a general-purpose cycloaliphatic diepoxide used principally with polyacid and anhydride cures. In particular, it provides good electrical loss properties, good weathering, and a high-heat-distortion temperature. veja menos | Request Sample |
3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21P | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21P is a pale yellow to colorless liquid that is part of Cycloaliphatic Epoxy Resin TTA21 Series. It is a general-purpose cycloaliphatic diepoxide used principally with polyacid and anhydride c...veja mais 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21P is a pale yellow to colorless liquid that is part of Cycloaliphatic Epoxy Resin TTA21 Series. It is a general-purpose cycloaliphatic diepoxide used principally with polyacid and anhydride cures. In particular, it provides good electrical loss properties, good weathering, and a high-heat-distortion temperature. veja menos | Request Sample |
3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to...veja mais 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to the dual epoxide functionality which can react with hydroxyl, carboxyl or amine groups of polymers contained in the system. End uses take advantage of the UV stability and low viscosity compared to other epoxy resin. This grade has an assay of 90% min. veja menos | Request Sample |
3,4-Epoxycyclohexylmethyl Methacrylate TTA15 | PhibroChem | 3,4-Epoxycyclohexylmethyl Methacrylate TTA15 is a light yellow liquid. Because of an unsaturated bond of epoxy and acrylic group, this product has both characteristics of epoxy and acrylic resins and can be cured with multi-curing methods. It has low visc...veja mais 3,4-Epoxycyclohexylmethyl Methacrylate TTA15 is a light yellow liquid. Because of an unsaturated bond of epoxy and acrylic group, this product has both characteristics of epoxy and acrylic resins and can be cured with multi-curing methods. It has low viscosity, good heat resistance, weatherability and electrical insulation. Some applications of TTA15 include epoxy active diluents, electrical parts packaging, coatings, fiber reinforced composites, LED encapsulates, photo adhesive and curing products, stabilizers, and large electrical molds. veja menos | Request Sample |
3,4,9,10-Perylenetetracarboxylic Dianhydride | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. | O Dianidrido 3,4 9,10-Perilenetetracarbolíxico é um importante intermediário para sintetizar corantes e pigmentos de perileno. É um pó uniforme vermelho brilhante com um ponto de fusão de >300°C. | |
34DT137 | Flint Group | 34DT137 is a yellow shade orange pigment with a color index number of PO 34. It has a specific gravity of 1.4 and is used primarily in offset solutions. | |
35 HPC | Toyal Europe | 35 HPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
35 HPS | Toyal Europe | 35 HPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
35 NPC | Toyal Europe | 35 NPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
35 NPS | Toyal Europe | 35 NPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
35 UPC | Toyal Europe | 35 UPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
35 UPS | Toyal Europe | 35 UPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
3,5-Xylidine | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. | O 3,5-Xilidino é um líquido amarelo claro ou sem cor que é um intermediário para corantes, pigmentos e farmacêuticos. | |
3,5,5-TRIMETHYL HEXANOL (NONANOL) | KH Neochem Americas, Inc. | Intermediate for cosmetics, fragrance, detergent, lubricant and plasticizer. | |
3,6–DIOXAOCTANEDIOIC ACID | AMRI Global | 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low meltin...veja mais 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
361 Chromium Oxide Green | Lansco Colors | 361 Chromium Oxide Green is a dark shade, stable, green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 361 Chromium Oxide Green is used in coatings for the construction...veja mais 361 Chromium Oxide Green is a dark shade, stable, green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 361 Chromium Oxide Green is used in coatings for the construction industry. veja menos | |
3663 Green | Lansco Colors | 3663 Green is a clean, green powder produced by solid state reactions at a very high temperature. It is lightfast, alkali resistant, acid resistant, heat resistant and weather resistant. Applications include stucco coatings, glass enamels, and glazes. Ad...veja mais 3663 Green is a clean, green powder produced by solid state reactions at a very high temperature. It is lightfast, alkali resistant, acid resistant, heat resistant and weather resistant. Applications include stucco coatings, glass enamels, and glazes. Additional uses can be found in various industrial baking and air-dry coatings veja menos | |
3,6,9–TRIOXADECANOIC ACID | AMRI Global | 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting...veja mais 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
3,6,9–TRIOXAUNDECANEDIOIC ACID | AMRI Global | 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low me...veja mais 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. veja menos | |
3736 Phthalo Green 36 | Lansco Colors | 3736 Phthalo Green 36 is a blue shade brominated phthalocyanine green pigment with good tinting strength and color purity. This product is used in various coatings. | |
3777 Phthalo Green 7 | Lansco Colors | 3777 Phthalo Green 7 is a bright, somewhat blue shade phthalocyanine pigment that is used in various inks and coatings. | |
386 Chromium Oxide Green | Lansco Colors | 386 Chromium Oxide Green is a dark shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherabilty. 386 Chromium Oxide Green is recommended for military and camouflage...veja mais 386 Chromium Oxide Green is a dark shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherabilty. 386 Chromium Oxide Green is recommended for military and camouflage applications. veja menos | |
3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M c...veja mais 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-210 are typically chosen over other 3M ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. veja menos | |
3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler load...veja mais 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-410 are typically chosen over other 3M ceramic microspheres for their overall balance in properties. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. veja menos | |
3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic m...veja mais 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. veja menos | |
3M™ Fluorosurfactant FC-4430 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...veja mais 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4430 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product can provide stain and dirt pick up resistance. veja menos | |
3M™ Fluorosurfactant FC-4432 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...veja mais 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4432 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. veja menos | |
3M™ Fluorosurfactant FC-4434 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...veja mais 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4434 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. veja menos | |
3M™ Glass Bubbles iM16K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...veja mais 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles iM30K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...veja mais 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles K1 | 3M Advanced Materials Division | 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...veja mais 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles K15 | 3M Advanced Materials Division | 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....veja mais 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles K20 | 3M Advanced Materials Division | 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....veja mais 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles K25 | 3M Advanced Materials Division | 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....veja mais 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles K37 | 3M Advanced Materials Division | 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...veja mais 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles K42HS | 3M Advanced Materials Division | 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...veja mais 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles K46 | 3M Advanced Materials Division | 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...veja mais 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S15 | 3M Advanced Materials Division | 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....veja mais 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S22 | 3M Advanced Materials Division | 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...veja mais 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S28HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...veja mais 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S32 | 3M Advanced Materials Division | 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...veja mais 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S35 | 3M Advanced Materials Division | 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...veja mais 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S38 | 3M Advanced Materials Division | 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...veja mais 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S38HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush streng...veja mais 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S42XHS | 3M Advanced Materials Division | 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...veja mais 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S60 | 3M Advanced Materials Division | 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...veja mais 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles S60HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...veja mais 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Glass Bubbles XLD3000 | 3M Advanced Materials Division | 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...veja mais 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. veja menos | |
3M™ Stain Resistant Additive and Sealer SRA-250 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product pe...veja mais 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-250 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-250 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. veja menos | |
3M™ Stain Resistant Additive and Sealer SRA-270 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The ...veja mais 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-270 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-270 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. veja menos | |
3M™ Stain Resistant Additive and Sealer SRA-450 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the...veja mais 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-450 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-450 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. veja menos | |
3M™ Stain Resistant Additive and Sealer SRA-451 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates th...veja mais 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-451 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-451 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. veja menos | |
3M™ Stain Resistant Additive SRC-220 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product...veja mais 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRC-220 offers durability, long-lasting performance and UV resistance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRC-220 is easy to incorporate into existing water and some solvent-based products and can be added to existing formulations or diluted with water or water miscible solvents and used as a stand-alone sealer. veja menos | |
3NG810 | Univar Solutions | 3NG810 is an ester of TMP alcohol and C8C10 acid, and is used as a lubricant in synthetic engine oils. | Request Sample |
3NG810 | OXEA | 3NG810 is an ester of TMP alcohol and C8C10 acid, and is used as a lubricant in synthetic engine oils. | |
4 HPC | Toyal Europe | 4 HPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
4 HPS | Toyal Europe | 4 HPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
(4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
4 NPC | Toyal Europe | 4 NPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
4 NPS | Toyal Europe | 4 NPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
4 UPC | Toyal Europe | 4 UPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
4 UPS | Toyal Europe | 4 UPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
4- vinyl-1-cyclohexene | Puyang Shenghuade Chemical Co., Ltd. | 4- vinyl-1-cyclohexene is a liquid base product that is colorless. This product has a flash point of 16 ºC and boiling point at 126-127 ºC. 4- vinyl-1-cyclohexene is used in polymer manufacturing and organic synthesis. | |
4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) | North Wanxing Chemical Co., Ltd. | 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,...veja mais 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) has a boiling point of 188-189°C, gas chromatography content of 98% minimum, and a melting point of 16-18°C. veja menos | |
4-Hydroxybutyl Acrylate (4HBA) | Kowa American Corporation | 4-HBA is a clear water white liquid. It is used for automotive painting. It helps protect against hardness and anit-rust, as well as offers good color, flatness, smoothness, brightness, and gloss. | Request Sample |
4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | Elemento fundamental para monômetros e o monômetro macro para os copolímeros do vinil, diluentes reactivos para revestimentos UV. Ethoxylatated HBVE é usado como um monômetro para o aditivo concreto. Usado para a água e o solvente baseou os polímeros de...veja mais Elemento fundamental para monômetros e o monômetro macro para os copolímeros do vinil, diluentes reactivos para revestimentos UV. Ethoxylatated HBVE é usado como um monômetro para o aditivo concreto. Usado para a água e o solvente baseou os polímeros de vinil do hydroxyfunctional, que são ligados com poliisocianatos e resinas de melamina. veja menos | |
4-Sulpho-1,8-Naphthalic Anhydride, Potassium Salt | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. | O Sal de Potássio Anidrido 4-Sulfo-1,8-Naftalico é um pó uniforme branco amarelado palha que é um importante material para sintetizar corantes e pigmentos vat. | |
4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII | PhibroChem | 4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII is a colorless, transparent liquid. Reactive through its vinyl or epoxide functionalities, it is useful as a chemical intermediate. It also serves as reactive diluent where high crosslink density is not critical. Th...veja mais 4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII is a colorless, transparent liquid. Reactive through its vinyl or epoxide functionalities, it is useful as a chemical intermediate. It also serves as reactive diluent where high crosslink density is not critical. This product is used in addition polymerization reaction in luminescent materials, electronic chips encapsulant, sealant, coupling agent, organic silicon synthesis, and microelctronics. veja menos | Request Sample |
40-200™ | Univar Solutions | 40-200™ is a dry ground marble with a coarse particle size controlled between 40 and 200 mesh screens. It is widely used in applications with high loading levels such as cement finishes, textured coatings, and abrasives. | Request Sample |
4032 Carbon Black | Lansco Colors | 4032 Carbon Black is a medium particle size, granular carbon black pigment with medium viscosity and jetness. This product is used in coating applications. | |
4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
410 Carbon Black | Lansco Colors | 410 Carbon Black is a granular carbon black pigment with high viscosity. This product is used in coatings, UV and solvent based inks. | |
42DT381 | Flint Group | 42DT381 is a transparent yellow pigment with a color index number of PY 42. It has a specific gravity of 3.5 and can be used primarily in UV/EB solutions. | |
4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | Este é um elemento reticulador (cross-linker) para resinas de epoxi, elemento fundamental para poliamida. Diaminodicyclohexylmethane é usado para revestimentos com resina epoxi de dois-componente e para os adesivos a base de epoxi. Diaminodicyclohexylme...veja mais Este é um elemento reticulador (cross-linker) para resinas de epoxi, elemento fundamental para poliamida. Diaminodicyclohexylmethane é usado para revestimentos com resina epoxi de dois-componente e para os adesivos a base de epoxi. Diaminodicyclohexylmethane assegura um equilíbrio ideal entre dureza e flexibilidade. veja menos | |
4,4'-dithiodimorpholine | Hainan Zhongxin Chemical Co., Ltd. | 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in t...veja mais 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in the production of synthetic rubbers and adhesives. veja menos | |
4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | Elemento fundamental para polyimides, polyamideimides, polyesterimides, e um agente reticulador (cross linker) especial para resinas de epoxi. Resinas de polyimides, polyamideinmides e polyesterimides a base de 4,4'-Methylenedianiline pode ser utilizada p...veja mais Elemento fundamental para polyimides, polyamideimides, polyesterimides, e um agente reticulador (cross linker) especial para resinas de epoxi. Resinas de polyimides, polyamideinmides e polyesterimides a base de 4,4'-Methylenedianiline pode ser utilizada para revestimentos isolantes eletricos. 4,4'-Methylenedianiline é também utilizada como um agente cruzada para revestimentos especiais com epoxi em pó. veja menos | |
4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...veja mais 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. veja menos | |
4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
4489-M-60 Long Oil Silicone Modified Alkyd Resin | Gabriel Performance Products | 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...veja mais 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. veja menos | |
461 Carbon Black | Lansco Colors | 461 Carbon Black is a blue tone black pigment powder with medium viscosity and good flood resistance that is used in coatings. | |
4640NS | Toyal Europe | 4640NS is a silver-grey, non-leafing-type aluminium pigment paste, comprised of aluminium flakes and oleic acid in a medium aliphatic and light aromatic solvent. This product is suitable for use, especially in conjunction with other pigments, in metallic ...veja mais 4640NS is a silver-grey, non-leafing-type aluminium pigment paste, comprised of aluminium flakes and oleic acid in a medium aliphatic and light aromatic solvent. This product is suitable for use, especially in conjunction with other pigments, in metallic paint and ink applications. veja menos |