| BR-571MB | Bomar, formerly Dymax Oligomers & Coatings | BR-571MB, a difunctional, aliphatic polyether urethane methacrylate, is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. It is an excellent choice for impact-resistant coatings. BR-571MB also brings desirable weather resistance and low-yellowing properties to formulations...veja mais BR-571MB, a difunctional, aliphatic polyether urethane methacrylate, is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. It is an excellent choice for impact-resistant coatings. BR-571MB also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. veja menos | |
| THIXATROL® AS 8024 | Elementis | THIXATROL® AS 8024 is a finely micronized polyamide rheological additive. This product is recommended for the use in solvent-borne and solvent-free medium to higher polar liquid organic systems. The product is suitable as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties, and other formulations...veja mais THIXATROL® AS 8024 is a finely micronized polyamide rheological additive. This product is recommended for the use in solvent-borne and solvent-free medium to higher polar liquid organic systems. The product is suitable as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties, and other formulations. veja menos | |
| Relca® PU-415 | Stahl Polymers | Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has go...veja mais Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has good water resistance properties and good compatibility properties with other binders. veja menos | |
| Pangel M280 | Tolsa, S.A. | Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties...veja mais Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties. It can be used for adhesives, emulsion paints, bituminous emulsion, textural paints, and granulation and agglomeration. veja menos | |
| DEE FO® 2020E/50 | Munzing Chemie | DEE FO® 2020E/50 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It has high persistence and is specifically designed for use in most emulsion systems, including EVA, VA, and acrylic formulations. It is commonly used ...veja mais DEE FO® 2020E/50 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It has high persistence and is specifically designed for use in most emulsion systems, including EVA, VA, and acrylic formulations. It is commonly used PSA, laminating, packaging, envelope and construction adhesives. veja menos | |
| RHOPLEX™ EP-6060 | Univar Solutions | RHOPLEX™ EP-6060 is an acrylic emulsion recommended for factory-applied interior wood coatings requiring early hardness, block resistance, and sandability. It can be used in clear formulations as a sealer and topcoat or in lightly pigmented (PVC 20%) coat...veja mais RHOPLEX™ EP-6060 is an acrylic emulsion recommended for factory-applied interior wood coatings requiring early hardness, block resistance, and sandability. It can be used in clear formulations as a sealer and topcoat or in lightly pigmented (PVC 20%) coatings. The wet and dry clarity of films are good, especially over light wood. veja menos | Request Sample |
| BR-744BT | Bomar, formerly Dymax Oligomers & Coatings | BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail ge...veja mais BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail gel polishes. This material has low skin sensitivity for dental and cosmetic applications and is INCI listed. veja menos | |
| Epotec® YD 011X-75 | Aditya Birla | Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for us...veja mais Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for use in solvent-based anti-corrosive coatings, marine paints, industrial paints, adhesives, and laminates. veja menos | |
| TergoSol™ | TBF Environmental Technology Inc. | TergoSol™ is and environmentally friendly solvent that is non-carcinogenic and benzene free. Its primary application is to be used in paint, ink/marker and adhesive formulations. This product has excellent solvency, solubility, and is VOC-exempt in 49 Sta...veja mais TergoSol™ is and environmentally friendly solvent that is non-carcinogenic and benzene free. Its primary application is to be used in paint, ink/marker and adhesive formulations. This product has excellent solvency, solubility, and is VOC-exempt in 49 States. The high purity of TergoSol™ makes it both non-toxic and biodegradable. veja menos | |
| DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...veja mais DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. veja menos | |
| ACRYSOL™ RM-3030 | Univar Solutions | ACRYSOL™ RM-3030 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal KU response. This product has demonstrated improved flow and leveling, improved syneresis resistance, and good film build in flat to gloss formulations...veja mais ACRYSOL™ RM-3030 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal KU response. This product has demonstrated improved flow and leveling, improved syneresis resistance, and good film build in flat to gloss formulations. veja menos | Request Sample |
| 1,3-Dioxolane | BASF SE, Intermediates Division | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxi...veja mais 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. It can also be used as a solvent in polyester film seaming. veja menos | |
| Ethyl Acetate | Prakash Chemical Intl. Pvt. Ltd. | Ethyl Acetate is the ester of ethanol and acetic acid, and is manufactured on a large scale for use as a solvent. This product can be used in a variety of coating formulations such as epoxies, urethanes, cellulosics, acrylics and vinyls. It can also be us...veja mais Ethyl Acetate is the ester of ethanol and acetic acid, and is manufactured on a large scale for use as a solvent. This product can be used in a variety of coating formulations such as epoxies, urethanes, cellulosics, acrylics and vinyls. It can also be used in solvent based flexographic and rotogravure inks and glues. veja menos | |
| STYRONAL® ND 811 | BASF Dispersions & Resins | Styronal® ND 811 is a very stiff carboxylated styene/butadiene dispersion used as a binder for nonwoven and coating applications. It is a mechanically and chemically stable modifier in laminating adhesive formulations. It provides stiffness and toughness....veja mais Styronal® ND 811 is a very stiff carboxylated styene/butadiene dispersion used as a binder for nonwoven and coating applications. It is a mechanically and chemically stable modifier in laminating adhesive formulations. It provides stiffness and toughness. Styronal® ND 811 may also be used as a glossing additive for both paper and paperboard coatings. veja menos | |
| TIB KAT® 318 | TIB Chemicals | TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. This product improves pot life and can be used in 1p- and 2p- PU formulations...veja mais TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. This product improves pot life and can be used in 1p- and 2p- PU formulations. veja menos | |
| SiSiB® PC7950 | SiSiB SILICONES | SiSiB® PC7950 is a colorless or yellowish transparent liquid with an acrid odor of acetic acid (vinegar). It hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce siloxanes or bind to inorganic substrates. It is used as a curing agent in acetoxy crosslinking RTV-1 sealant formulations...veja mais SiSiB® PC7950 is a colorless or yellowish transparent liquid with an acrid odor of acetic acid (vinegar). It hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce siloxanes or bind to inorganic substrates. It is used as a curing agent in acetoxy crosslinking RTV-1 sealant formulations. veja menos | |
| REAXIS® E140P | Reaxis Inc. | REAXIS® E140P is an exceptionally pure grade of potassium stannate that is approved for use in applications where the tightest specifications must be met, such as in formulations for Hydrogen Peroxide stabilization. It is manufactured by a proprietary dir...veja mais REAXIS® E140P is an exceptionally pure grade of potassium stannate that is approved for use in applications where the tightest specifications must be met, such as in formulations for Hydrogen Peroxide stabilization. It is manufactured by a proprietary direct process which yields the purest product available anywhere. REAXIS® E140P also finds use in esterfications. veja menos | |
| AGITAN® 315 | Munzing Chemie | AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all...veja mais AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all common binders. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. veja menos | |
| Ancamine® 2441 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2441 curing agent is a modified polyamine which was designed for use as a latent curing agentfor onecomponent adhesive formulations. The product can also be used as an accelerator fordicyandiamide (dicy). Its combinatio...veja mais Ancamine® 2441 curing agent is a modified polyamine which was designed for use as a latent curing agentfor onecomponent adhesive formulations. The product can also be used as an accelerator fordicyandiamide (dicy). Its combination of low temperature activation, good shelf life and high glass transitiontemperature permits use in many applications requiring latency and high performance. veja menos | Request Sample |
| Proxel™ BD20 Preservative | Arxada | Proxel™ BD20 Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints, water based adhesives, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations...veja mais Proxel™ BD20 Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints, water based adhesives, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations, aqueous slurries, titanium dioxide slurries, tape joint compounds, leather processing solutions, and for the preservation of fresh animal hides and skins. veja menos | |
| ProFlex MS 80 | P.A.T. Products | ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations...veja mais ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. veja menos | Request Sample |
| CN1002 | Sartomer Americas | CN1002 is an oligomer that combines abrasion resistance and flexibility with hardness and fast cure response. CN1002 is specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations...veja mais CN1002 is an oligomer that combines abrasion resistance and flexibility with hardness and fast cure response. CN1002 is specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations. The suggested level of addition is 15-20% of the total formulation. veja menos | |
| BR-571 | Bomar, formerly Dymax Oligomers & Coatings | BR-571 is an aliphatic polyether urethane diacrylate with exceptionally low color. Based on a stable polyether backbone, BR-571 offers excellent physical properties in formulated films. While relatively high in neat viscosity, BR-571 reduces quickly with the addition of heat or monomer. Formulations...veja mais BR-571 is an aliphatic polyether urethane diacrylate with exceptionally low color. Based on a stable polyether backbone, BR-571 offers excellent physical properties in formulated films. While relatively high in neat viscosity, BR-571 reduces quickly with the addition of heat or monomer. Formulations using BR-571 often have a unique blend of toughness and flexibility. veja menos | |
| DOWSIL™ 67 Additive | Univar Solutions | Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effec...veja mais Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. veja menos | Request Sample |
| TEGOPAC® RD 1 | Evonik Operations GmbH, BL Silanes | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...veja mais TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. veja menos | |
| TEGOPAC® RD 1 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...veja mais TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. veja menos | |
| TEGOPAC® RD 2 | Evonik Operations GmbH, BL Silanes | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...veja mais TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. veja menos | |
| TEGOPAC® RD 2 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...veja mais TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. veja menos | |
| DOWSIL™ 500W Additive | Univar Solutions | Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...veja mais Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. veja menos | Request Sample |
| DOWSIL™ 501W Additive | Univar Solutions | Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...veja mais Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. veja menos | Request Sample |
| DOWSIL™ 502W Additive | Univar Solutions | Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...veja mais Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. veja menos | Request Sample |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations...veja mais LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. veja menos | Request Sample |
| SiSiB® PC6310 | SiSiB SILICONES | SiSiB® 6310 is a clear, colorless liquid with a characteristic odor. It can be used in the production of pipes and cables made of silane crosslinked polyethylene (PE-Xb), as a water scavenger during the production of crosslinking adhesive and sealant formulations...veja mais SiSiB® 6310 is a clear, colorless liquid with a characteristic odor. It can be used in the production of pipes and cables made of silane crosslinked polyethylene (PE-Xb), as a water scavenger during the production of crosslinking adhesive and sealant formulations, or as co-monomers in the production of silane-modified binders for surface coatings. veja menos | |
| Epotec® RD 107 | Aditya Birla | Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This prod...veja mais Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This product is ideal for use in structural adhesives, coatings, and filament winding, lamination, & electronic encapsulation applications. veja menos | |
| SiSiB® PC7130 | SiSiB SILICONES | SiSiB® PC7130 is colorless or yellowish transparent liquid. It is used as a neutral curing agent in silicone sealant formulations or as the main crosslinker of choice for oxime silicone sealants that can be used by itself or in combination with other oxi...veja mais SiSiB® PC7130 is colorless or yellowish transparent liquid. It is used as a neutral curing agent in silicone sealant formulations or as the main crosslinker of choice for oxime silicone sealants that can be used by itself or in combination with other oxime silanes to provide the sealant with targeted properties (such as desired cure rate, adhesion etc). veja menos | |
| PEL-SIL CL320 | Ele Corporation | PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl functional. It is useful for imparting silicone characteristics itno synthetic leather top coat formulations...veja mais PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl functional. It is useful for imparting silicone characteristics itno synthetic leather top coat formulations. veja menos | |
| Decoupage MNP | Univar Solutions | Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage co...veja mais Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage coating. Decoupage MNP can also be used in other nonylphenol applications where color stability is of prime importance. veja menos | Request Sample |
| REAXIS® S45 | Reaxis Inc. | REAXIS® S45 is a very high purity stable aqueous tin salt solution that is manufactured by a proprietary process to insure consistently low impurity levels. It is widely used as a reducing agent, and as a perfered tin source for tin/nickel in electrolytic baths for plating. REAXIS® S45 is also used in Sn/Pd activator formulations...veja mais REAXIS® S45 is a very high purity stable aqueous tin salt solution that is manufactured by a proprietary process to insure consistently low impurity levels. It is widely used as a reducing agent, and as a perfered tin source for tin/nickel in electrolytic baths for plating. REAXIS® S45 is also used in Sn/Pd activator formulations for POP. veja menos | |
| Lumicryl® 1928 | Estron Chemical, Inc. | Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations...veja mais Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. veja menos | |
| AGITAN® 260 | Munzing Chemie | AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations...veja mais AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. veja menos | |
| Andisil OH 750 | AB Specialty Silicones | Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 1,000 | AB Specialty Silicones | Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 2,000 | AB Specialty Silicones | Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 3,500 | AB Specialty Silicones | Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 4,000 | AB Specialty Silicones | Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 6,000 | AB Specialty Silicones | Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 14,000 | AB Specialty Silicones | Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 20,000 | AB Specialty Silicones | Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 50,000 | AB Specialty Silicones | Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 80,000 | AB Specialty Silicones | Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 300,000 | AB Specialty Silicones | Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil MOH 1,000 | AB Specialty Silicones | Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil MOH 10,000 | AB Specialty Silicones | Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil MOH 50,000 | AB Specialty Silicones | Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...veja mais Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| TAMOL™ 945 | Univar Solutions | TAMOL™ 945 is a highly-effective polycarboxylic acid dispersant supplied at 45% solids in the sodium form. It is recommended for use in waterborne paint and coatings formulations by providing compatibility with anionic HASE associative rheology modifiers,...veja mais TAMOL™ 945 is a highly-effective polycarboxylic acid dispersant supplied at 45% solids in the sodium form. It is recommended for use in waterborne paint and coatings formulations by providing compatibility with anionic HASE associative rheology modifiers, excellent heat age and viscosity stability. It is very low foaming and is very efficient in dispersing mineral slurries. veja menos | Request Sample |
| Oppanol® B 10 | BASF Corporation | Oppanol® B 10 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations...veja mais Oppanol® B 10 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations. Applications include adhesives, sealants, coating compounds, electrical insulation, and chewing gum. veja menos | |
| Oppanol® B 11 | BASF Corporation | Oppanol® B 11 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations...veja mais Oppanol® B 11 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations. Applications include adhesives, sealants, coating compounds, electrical insulation, and chewing gum. veja menos | |
| Oppanol® B 14 | BASF Corporation | Oppanol® B 14 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations...veja mais Oppanol® B 14 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations. Applications include adhesives, sealants, coating compounds, electrical insulation, and chewing gum. veja menos | |
| Oppanol® B 15 | BASF Corporation | Oppanol® B 15 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations...veja mais Oppanol® B 15 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations. Applications include adhesives, sealants, lubricating oils, coating compounds, and chewing gum. veja menos | |
| BR-582E8 | Bomar, formerly Dymax Oligomers & Coatings | BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact and bend-resistant coatings. BR-582E8 also brings desirable weather resistance and low-yellowing properties to formulations...veja mais BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact and bend-resistant coatings. BR-582E8 also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. veja menos | |
| AGITAN® 305 | Munzing Chemie | AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations...veja mais AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood coatings, printing inks, and adhesives. veja menos | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations...veja mais Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. veja menos | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations...veja mais Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. veja menos | |
| GENOMER* 1231 | Rahn USA Corp. | GENOMER* 1231 is a difunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. It offers excellent flexibility, excellent toughness, low yellowing, good heat resistance, and good chemical resistance. This product ...veja mais GENOMER* 1231 is a difunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. It offers excellent flexibility, excellent toughness, low yellowing, good heat resistance, and good chemical resistance. This product is recommended for coatings on metals and metallized substrates, coatings on glass, plastics, wood and paper, coatings on optical fiber, adhesives, electronics, and inks. veja menos | Request Sample |
| Epotec® RD 113 | Aditya Birla | Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is idea...veja mais Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is ideal for chemical resistant coatings, fast setting adhesives & sealants, tank linings, abrasion resistant castings, and encapsulation & other electronic applications. veja menos | |
| REAXIS® C214 | Reaxis Inc. | REAXIS® C214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. A clear to slightly yellow liquid, it is usually more reactive than DBTL (REAXIS® C218) fo...veja mais REAXIS® C214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. A clear to slightly yellow liquid, it is usually more reactive than DBTL (REAXIS® C218) for most polyurethane systems, resulting in quicker cure times.In addition, REAXIS® C214 can be used in waterborne systems. veja menos | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...veja mais DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. veja menos | |
| KRATON™ G1652 H | Univar Solutions | KRATON™ G1652 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient...veja mais KRATON™ G1652 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings. veja menos | Request Sample |
| Bisomer® PTE | GEO Specialty Chemicals, Inc.TRIMET Products Group | BISOMER ® PTE é amplamente utilizado na ativação de resinas acrílicas à base de MMA; estireno com base de poliesteres insaturados e formulações de metacrilato de éster de vinilo. Este produto tem um valor de amina de 250 264 mg KOH / g, um número de cor d...veja mais BISOMER ® PTE é amplamente utilizado na ativação de resinas acrílicas à base de MMA; estireno com base de poliesteres insaturados e formulações de metacrilato de éster de vinilo. Este produto tem um valor de amina de 250 264 mg KOH / g, um número de cor de Gardner de 15 máx., E um peso molecular (médio) de 217g/mol. BISOMER ® PTE é uma amina terciária aromática utilizada como um ativador de amina para a iniciação de peróxido orgânico, ideal para o uso em formulações usando peróxido de dibenzoilo (BPO). Ele tem uma toxicidade reduzida. BISOMER ® PTE é amplamente utilizado para ativar resinas acrílicas à base de MMA, poliesteres insaturados à base de estireno e formulações de metacrilato de ésteres de vinil. É ideal em uma ampla gama de aplicações, incluindo piso acrílico, adesivos, montagens químicas, tintas para marcação de estradas, chumbadores e argamassas químicas. veja menos | |
| Crodafos™ T6A | Croda Coatings & Polymers | Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also ...veja mais Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also functions as a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. veja menos | |
| MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 (PM-004) | PT. NASCO | MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations...veja mais MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations. It exhibits good hardness, high gloss and vest fest drying speed. veja menos | |
| RHOPLEX™ WL-91 | Univar Solutions | RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoidin...veja mais RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoiding surface preparation and raw materials associated with many solvent-borne systems. Furthermore, it exhibits superiority in chemical resistance, oil resistance, and film toughness. veja menos | Request Sample |
| SiSiB® PC5011 | SiSiB SILICONES | SiSiB® PC5011 is a colorless transparent liquid. It can be used as a coupling agent to improve adhesion of organic resins to inorganic surfaces, as an additive in a urethane adhesive formulations, as a coupling agent for epoxy resins to glass in laminate...veja mais SiSiB® PC5011 is a colorless transparent liquid. It can be used as a coupling agent to improve adhesion of organic resins to inorganic surfaces, as an additive in a urethane adhesive formulations, as a coupling agent for epoxy resins to glass in laminates, as a coupling agent for treating glass fabric used in polystyrene laminates, or as an intermediate for other functional organosilanes. veja menos | |
| KRATON™ A1536 H | Univar Solutions | KRATON™ A1536 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 57%. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid ...veja mais KRATON™ A1536 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 57%. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures. veja menos | Request Sample |
| DEE FO® XRM-1547A | Munzing Chemie | DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV systems. It is also commonly used in printing ink formulations...veja mais DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV systems. It is also commonly used in printing ink formulations, such as film/foil, envelope and metallic. veja menos | |
| VINAVIL® 5815 | VINAVIL Americas Corp. | VINAVIL® 5815, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives, as a cement additive, and in textile printing applications. This product is compatible with cement adhesives and additives that are used in the formulations...veja mais VINAVIL® 5815, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives, as a cement additive, and in textile printing applications. This product is compatible with cement adhesives and additives that are used in the formulations of coatings or adhesives. veja menos | |
| AGITAN® 265 | Munzing Chemie | AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations...veja mais AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. veja menos | |
| GENOMER* 4230 | Rahn USA Corp. | GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations...veja mais GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations. This product is recommended for use in the following applications: coatings for metal and plastic; printing inks; laminating adhesives; and peroxide curing. veja menos | Request Sample |
| AGITAN® 307 | Munzing Chemie | AGITAN® 307 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations...veja mais AGITAN® 307 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood and paper coatings, printing inks, and adhesives. veja menos | |
| GEL-3500 | NuSil Silicone Technology 1 | GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requi...veja mais GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requirements. This product is best utilized in applications that would require a gel that has a solvent resistance. veja menos | |
| Burez® K80 500D | Lawter | Burez® K80 500D is a rosin soap with 80% solids and functions as an emulsifier in emulsion systems, as a tackifier for bottle label adhesives and applications in pigment resination. The Burez® range of rosin soaps are based on modified and disproportionated rosins saponified with potassium hydroxide or sodium. It is designed mostly for emulsion polymerization, wet glue formulations...veja mais Burez® K80 500D is a rosin soap with 80% solids and functions as an emulsifier in emulsion systems, as a tackifier for bottle label adhesives and applications in pigment resination. The Burez® range of rosin soaps are based on modified and disproportionated rosins saponified with potassium hydroxide or sodium. It is designed mostly for emulsion polymerization, wet glue formulations and organic pigment production. veja menos | |
| Oppanol® B 12 | BASF Corporation | Oppanol® B 12 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations...veja mais Oppanol® B 12 is a polyisobutene that creates a vapor barrier and is elastic at low temperatures. This material produces no skin irritation and adheres to a wide variety of surfaces while also creating electrical insulation. This material is resinous and provides a tack and adhesion to formulations. Applications include adhesives, sealants, lubricating oils, coating compounds, electrical insulation, and chewing gum. veja menos | |
| BRC-8430E | Bomar, formerly Dymax Oligomers & Coatings | BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellent candidate for moisture resistant adhesives, coatings, and resins, as well as formulations...veja mais BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellent candidate for moisture resistant adhesives, coatings, and resins, as well as formulations that need to pass autoclave or 85/85 testing. veja menos | |
| REAXIS® C125 | Reaxis Inc. | REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can...veja mais REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can also be utilized either neat or as a mixture in alcohols. REAXIS® C125 is typically used at concentrations ranging from 0.01 - 0.20 wt%. veja menos | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...veja mais Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. veja menos | |
| Ancamine® 2442 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations. The product can also be used to accelerate dicyandiamide (DICY). It provides an excellent balance of low-temp...veja mais Ancamine® 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations. The product can also be used to accelerate dicyandiamide (DICY). It provides an excellent balance of low-temperature activation, good shelf stability and high glass transition temperature, and can be used in many applications requiring latency and high performance. veja menos | Request Sample |
| DEE FO® PI-16P | Munzing Chemie | DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations....veja mais DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations. It is commonly used in corrugated, envelope, film and foil, and metallic printing inks, and can be used in PVOH adhesives. veja menos | |
| Surfynol® DF-220 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid that has been specifically designed to be used in a variety of water-based formulations...veja mais Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid that has been specifically designed to be used in a variety of water-based formulations, including printing inks, coatings and adhesives. veja menos | |
| Rheotech™ 3800 | Arkema Rheology & Specialty Additives | Rheotech™ 3800 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to ...veja mais Rheotech™ 3800 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by brush, especially for finishing touches. veja menos | Request Sample |
| Rheotech™ 4200 | Arkema Rheology & Specialty Additives | Rheotech™ 4200 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to ...veja mais Rheotech™ 4200 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by brush, especially for finishing touches. veja menos | Request Sample |
| Proxel™ GXL Preservative | Arxada | Proxel™ GXL Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints including varnishes, lacquers, and stains, water based adhesives, inks, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations...veja mais Proxel™ GXL Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints including varnishes, lacquers, and stains, water based adhesives, inks, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations, aqueous slurries, titanium dioxide slurries, tape joint compounds, leather processing solutions, and for the preservation of fresh animal hides and skins. veja menos | |
| GENOMER* 4515 | Rahn USA Corp. | GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printin...veja mais GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printing. GENOMER* 4515 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. veja menos | Request Sample |
| Coapur™ XS 12 | Arkema Rheology & Specialty Additives | Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheo...veja mais Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ XS 12 is a pure associative thickener. veja menos | Request Sample |
| SR217 | Sartomer Americas | SR217 é um monômero monofuncional alifático de baixa viscosidade para uso em revestimento UV/EB e formulações de tinta. O SR217 melhora a aderência ao plástico, metais e outros substratos difíceis | |
| SR9053 | Sartomer Americas | O SR9053 é um éster ácido trifuncional que melhora a aderência de formulações de adesivos e revestimento de metal, plástico, borracha e vidro. SR9053 não é recomendado para uso com aminas. | |
| ACRYSOL™ RM-400 | Univar Solutions | ACRYSOL™ RM-400 is a solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, designed as a KU-building associative thickener offering formulators an excellent balance of sag resistance, particularly in tinted paints, flow and leveling, and gloss development for interior and exterior paints. It also contributes significant ICI viscosity, allowing the reduction of ICI builder to approximately 25% of other starting point formulations...veja mais ACRYSOL™ RM-400 is a solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, designed as a KU-building associative thickener offering formulators an excellent balance of sag resistance, particularly in tinted paints, flow and leveling, and gloss development for interior and exterior paints. It also contributes significant ICI viscosity, allowing the reduction of ICI builder to approximately 25% of other starting point formulations. veja menos | Request Sample |
| KRATON™ G1633 E | Univar Solutions | KRATON™ G1633 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of ...veja mais KRATON™ G1633 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures. veja menos | Request Sample |
| KRATON™ G1651 H | Univar Solutions | KRATON™ G1651 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of...veja mais KRATON™ G1651 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures. veja menos | Request Sample |
| VINAVIL® 5816 | VINAVIL Americas Corp. | VINAVIL® 5816, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives. It can also be used in cementitious waterproofing membranes and in textile printing applications. This product is compatible with cement adhesives as well as additives used in coating or adhesive formulations...veja mais VINAVIL® 5816, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives. It can also be used in cementitious waterproofing membranes and in textile printing applications. This product is compatible with cement adhesives as well as additives used in coating or adhesive formulations. veja menos | |
| SiSiB® PC3510 | SiSiB SILICONES | SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), or in waterborne coating formulations...veja mais SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), or in waterborne coating formulations, to improve solvent, impact and mar resistance, wet and dry adhesion, also stain resistance in wood and automotive plastic coatings. veja menos | |
| DEE FO® 215 | Munzing Chemie | DEE FO® 215 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It is a universal defoamer that is used in a variety of adhesive applications, including PSA, laminating, packaging, envelope, wood glue, construction, and natural/neoprene formulations...veja mais DEE FO® 215 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It is a universal defoamer that is used in a variety of adhesive applications, including PSA, laminating, packaging, envelope, wood glue, construction, and natural/neoprene formulations. It is also commonly used in clear, industrial water-based, and high gloss coatings, as well as traffic paints. veja menos | |
| TAMOL™ 851 | Univar Solutions | TAMOL™ 851 is a versatile 30% solids polyacid pigment dispersant, free of ammonia and formaldehyde, with low-foam and used in a wide range of latex paint formulations. It is recommended for flat through semi-gloss acrylic, styrene/acrylic, and vinyl acryl...veja mais TAMOL™ 851 is a versatile 30% solids polyacid pigment dispersant, free of ammonia and formaldehyde, with low-foam and used in a wide range of latex paint formulations. It is recommended for flat through semi-gloss acrylic, styrene/acrylic, and vinyl acrylic by providing efficient dispersibility and compatibility with ZnO and other pigments/fillers, viscosity stability and highly compatible with anionic HASE associative rheology modifiers. veja menos | Request Sample |
