| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...veja mais Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. veja menos | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...veja mais MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. veja menos | |
| COPONYL™ N-4399 | Nippon Gohsei | COPONYL™ N-4399 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides slight adhesion, adhesion to rough surfaces, and is residue free. Applications include masking tapes,...veja mais COPONYL™ N-4399 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides slight adhesion, adhesion to rough surfaces, and is residue free. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. veja menos | |
| TACOLYN 1070 | Univar Solutions | TACOLYN 1070 is an aqueous, 55% solids, solvent-free, anionic hydrocarbon dispersion. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction adhesive applications by enhancing adhesion to polyolefin substrates an...veja mais TACOLYN 1070 is an aqueous, 55% solids, solvent-free, anionic hydrocarbon dispersion. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction adhesive applications by enhancing adhesion to polyolefin substrates and recycled corrugated board. It promotes cohesive strength and offers good moisture resistance when used in pressure sensitive adhesives. veja menos | Request Sample |
| BYK®-349 | BYK | Silicone surfactante para melhora da umectação em sistemas aquosos. Siloxane modificado com poliéter. | |
| GENOMER* 6083/HD | Rahn USA Corp. | GENOMER* 6083/HD is an inert resin in HDDA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: letterpress inks; flexo inks and varnishes; screen inks and varnishes; wood, p...veja mais GENOMER* 6083/HD is an inert resin in HDDA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: letterpress inks; flexo inks and varnishes; screen inks and varnishes; wood, plastic, and paper coatings; and pigment master batches. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. veja menos | Request Sample |
| CN9004 | Sartomer Americas | O CN9004 é um oligômero acrilato de uretano alifático bifuncional que não causa amarelamento e confere flexibilidade para adesivos, revestimentos e tintas. O CN9004 tem boa resistência às intempéries e boa aderência. | |
| CN104A80Z | Sartomer Americas | CN104A80Z é um acrilato epóxi bifuncional a base de bisfenol A misturado com 20% SR306, diacrilato glicol tripropileno. Ele proporciona um bom equilíbrio de propriedades da água e alta reatividade. O oligômero básico, CN104, oferece a menor cor dos acrila...veja mais CN104A80Z é um acrilato epóxi bifuncional a base de bisfenol A misturado com 20% SR306, diacrilato glicol tripropileno. Ele proporciona um bom equilíbrio de propriedades da água e alta reatividade. O oligômero básico, CN104, oferece a menor cor dos acrilatos de epóxi com base bisfenol-A da Sartomer. CN104A80Z oferece resistência química, excelente brilho, alta reatividade e baixa cor. As s aplicações sugeridas incluem adesivos, revestimentos, eletrônicos, tintas e selantes. veja menos | |
| BR-941 | Bomar, formerly Dymax Oligomers & Coatings | BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its exc...veja mais BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers. veja menos | |
| EPS® 2224 | EPS Materials | EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It ...veja mais EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It is also an excellent choice for both clear and pigmented caulk and sealant formulations that meet ASTM C834 specifications. veja menos | Request Sample |
| RHOPLEX™ WL-91 | Univar Solutions | RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoidin...veja mais RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoiding surface preparation and raw materials associated with many solvent-borne systems. Furthermore, it exhibits superiority in chemical resistance, oil resistance, and film toughness. veja menos | Request Sample |
| CN9028 | Sartomer Americas | O CN9028 é um oligômero acrilato de uretano alifático bifuncional que se caracteriza por pouca cor e baixa viscosidade. Ele não causa amarelamento e confere maciez e flexibilidade aos adesivos, revestimentos e tintas. | |
| CN9023 | Sartomer Americas | O CN9023 é um oligômero acrilato de uretano alifático bifuncional que se caracteriza por pouca cor e baixa viscosidade. Ele não causa amarelamento e confere maciez e flexibilidade aos adesivos, revestimentos e tintas. | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| CN3715 | Sartomer Americas | CN3715 is an acrylated amine synergist with good reactivity, high flexibility and low pigment bleeding that improve surface cure when used with a suitable photoinitiator system. | |
| ACRYSOL™ ASE-75 | Univar Solutions | ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in imp...veja mais ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics. veja menos | Request Sample |
| VINAVIL® 2433 | VINAVIL Americas Corp. | VINAVIL® 2433, in the form of a clear film, is an anionic vinyl/acrylic copolymer emulsion containing high solids that can be used in pressure-sensitive adhesives. It is compatible with a wide variety of substrates, including metals and plastics, and work...veja mais VINAVIL® 2433, in the form of a clear film, is an anionic vinyl/acrylic copolymer emulsion containing high solids that can be used in pressure-sensitive adhesives. It is compatible with a wide variety of substrates, including metals and plastics, and works best with non-polar surfaces such as polypropylene or polyethylene. This product can be used both for permanent and temporary labeling applications. veja menos | |
| RHOPLEX™ WL-100 | Univar Solutions | RHOPLEX™ WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal s...veja mais RHOPLEX™ WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) accommodates a wide range of formulation types and process types capable of meeting many applications. It can achieve volume solids above conventional waterborne binders. veja menos | Request Sample |
| RHOPLEX™ AC-1034 | Univar Solutions | RHOPLEX™ AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edgesealer products and offers very good compatibility with high leve...veja mais RHOPLEX™ AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edgesealer products and offers very good compatibility with high levels of waxes and fillers, which are often used in such products. RHOPLEX™ AC-1034 can also be used as a clear primer or sealer coat to provide water resistance. veja menos | Request Sample |
| RAYKOTE® 2000 | Specialty Polymers, Inc. | RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. R...veja mais RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. RAYKOTE® 2000 is a formulated coating that is able to adhere wet and dry to galvanized, aluminum, wood and aged alkyd enamel materials. veja menos | |
| VINAVIL® 5707 LP 28 | VINAVIL Americas Corp. | VINAVIL® 5707 LP 28, in the form of a transparent, clear and flexible film, is a modified styrene/acrylic latex that can be used in water-based coatings, especially for exterior wood applications. It can also be used as a wood sealer or as a protective c...veja mais VINAVIL® 5707 LP 28, in the form of a transparent, clear and flexible film, is a modified styrene/acrylic latex that can be used in water-based coatings, especially for exterior wood applications. It can also be used as a wood sealer or as a protective coating. This product is compatible with any paint additive on the market and is presented in an anionic emulsifying system. veja menos | |
| ZIPCONE™ UA | Gelest, Incorporated | Clear acrylate modified silicone designed for UV cure. | |
| Auroren® AE-301 (Waterborne) | PhibroChem | Auroren® AE-301 (Waterborne) is a waterborne acrylic modified polyolefin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like aluminum. Th...veja mais Auroren® AE-301 (Waterborne) is a waterborne acrylic modified polyolefin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like aluminum. This product has excellent alcohol tolerance. Applicable fields of AE-301 are coating, primer, ink ingredient, and adhesive for a variety of substrates. veja menos | Request Sample |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...veja mais MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. veja menos | |
| CN9178 | Sartomer Americas | O CN9178 é um oligômero acrilato de uretano alifático bifuncional que se caracteriza por pouca cor e baixa viscosidade. Ele não causa amarelamento e confere maciez e flexibilidade aos adesivos, revestimentos e tintas. | |
| CN9002 | Sartomer Americas | CN9002 is a difunctional aliphatic urethane acrylate oligomer characterized by low color and low viscosity. It is non-yellowing and imparts softness and flexibility to adhesives, coatings, and inks. | |
| Soluryl E-80T (APE Free) | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl E-80T (APE Free) is a styrene-acryl emulsion for water-based products. It is recommended as a let down vehicle for corrugated paper. | |
| VINAVIL® 5816 | VINAVIL Americas Corp. | VINAVIL® 5816, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives. It can also be used in cementitious waterproofing memb...veja mais VINAVIL® 5816, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives. It can also be used in cementitious waterproofing membranes and in textile printing applications. This product is compatible with cement adhesives as well as additives used in coating or adhesive formulations. veja menos | |
| RAYCORE® 9506A | Specialty Polymers, Inc. | RAYCORE® 9506A is anionic hydroxyl functional polyurethane-acrylic core shell hybrid. This product is intended to offer chemical, scratch and UV resistance. It has the ability to be cross-linked with isocyanates or melamines. It is intended for hard surfa...veja mais RAYCORE® 9506A is anionic hydroxyl functional polyurethane-acrylic core shell hybrid. This product is intended to offer chemical, scratch and UV resistance. It has the ability to be cross-linked with isocyanates or melamines. It is intended for hard surfaces and to produce scratch resistance. This product primarily is used for topcoat chemical, water and scratches resistance on hard wood and cement surfaces. veja menos | |
| RAYCRYL® 1096 | Specialty Polymers, Inc. | RAYCRYL® 1096 is a clear anionic acrylic core shell polymer and is classified as an efflorescence resistant polymer. This product is designed for architectural, concretes and woods. It passes Kitchen Cabinet Manufacture Association (KCMA) testing for wood...veja mais RAYCRYL® 1096 is a clear anionic acrylic core shell polymer and is classified as an efflorescence resistant polymer. This product is designed for architectural, concretes and woods. It passes Kitchen Cabinet Manufacture Association (KCMA) testing for wood applications. It has hot wet block resistance on concrete as a sealer. The primary use for this product is for moisture and effofescence resistance, clear topcoats and scratch/chemical resistance. veja menos | |
| Texicryl® S-0933M | Scott Bader | Texicryl® S-0933M is a styrene acrylic copolymer emulsion that has a 33% solids resin solution, solubilized with Monoethanolamine, in water. It is a vehicle made for use in various flexible packaging applications including pigmented systems like inks, coa...veja mais Texicryl® S-0933M is a styrene acrylic copolymer emulsion that has a 33% solids resin solution, solubilized with Monoethanolamine, in water. It is a vehicle made for use in various flexible packaging applications including pigmented systems like inks, coatings and adhesives. When formulated into ink systems, it is ideal for gravure and flexographic applications. Texicryl® S-0933M is designed to give off good gloss, while maintaining low foaming and aiding good printability. veja menos | |
| RAYCRYL® 1526 | Specialty Polymers, Inc. | RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the woo...veja mais RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the wood, aged alkyd, and cement surfaces; and is primarily used to protect surfaces from water resistance and a sealer for concrete. veja menos | |
| Rheotech™ 2800 | Arkema Rheology & Specialty Additives | Rheotech™ 2800 is an acrylic associative thickener for water-based systems (also called HASE). Its specific associative behavior allows it to provide a unique rheological balance between high, medium and low shear rates. It helps to aim simultaneously ver...veja mais Rheotech™ 2800 is an acrylic associative thickener for water-based systems (also called HASE). Its specific associative behavior allows it to provide a unique rheological balance between high, medium and low shear rates. It helps to aim simultaneously very good body, value at hand stirring, stability and ease of coat, leveling, film building and spatter resistance. veja menos | Request Sample |
| RAYPLUS™ 1097 | Specialty Polymers, Inc. | RAYPLUS™ 1097 is an anionic aluminum oxide infused core shell acrylic polymer, intended to be a topcoat. RAYPLUS™ 1097 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a topcoat that has chemical and s...veja mais RAYPLUS™ 1097 is an anionic aluminum oxide infused core shell acrylic polymer, intended to be a topcoat. RAYPLUS™ 1097 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a topcoat that has chemical and scratch resistance. RAYPLUS™ 1097 has wet block resistance that provides water resistance and allows it to be a concrete sealer. veja menos | |
| RAYCORE® 9534A | Specialty Polymers, Inc. | RAYCORE® 9534A is an anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV resistance. The products properties allow it to adhere to several different surfaces. RAYCORE® 9534A has th...veja mais RAYCORE® 9534A is an anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV resistance. The products properties allow it to adhere to several different surfaces. RAYCORE® 9534A has the ability to be formulated to low VOC levels. The RAYCORE® 9534A topcoat protects surfaces from scratches, chemicals and water corrosion. veja menos | |
| VINAVIL® 5706 | VINAVIL Americas Corp. | VINAVIL® 5706, in the form of a clear, slightly tacky film, is an elastomeric styrene/acrylic copolymer containing high solids that can be used in wood flat paints and primers, flexible coatings, waterproof membranes, interior or exterior wall paints and ...veja mais VINAVIL® 5706, in the form of a clear, slightly tacky film, is an elastomeric styrene/acrylic copolymer containing high solids that can be used in wood flat paints and primers, flexible coatings, waterproof membranes, interior or exterior wall paints and plasters, and flooring adhesives. This product will improve the water-resistance, the flexibility and adhesion to different substrates of cement-based systems. veja menos | |
| GENOMER* 5271 | Rahn USA Corp. | GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and a...veja mais GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and adhesives. GENOMER* 5271 contributes to excellent cure response, toughness, flexibility and adhesion. Unlike conventional amine synergists, GENOMER* 5271 reacts to become part of the product network, leading to lower odor, lower extractables and better overall properties. veja menos | Request Sample |
| VINAVIL® 2401 | VINAVIL Americas Corp. | VINAVIL® 2401, in the form of a transparent, clear, flexible and slightly sticky film, is an anionic/non-ionic copolymer emulsion based on vinyl acrylic that can be used in wool insulation adhesives, flooring adhesives, and paper external adhesion applica...veja mais VINAVIL® 2401, in the form of a transparent, clear, flexible and slightly sticky film, is an anionic/non-ionic copolymer emulsion based on vinyl acrylic that can be used in wool insulation adhesives, flooring adhesives, and paper external adhesion applications. This product is compatible with organic resins in the adhesive industry. It offers a good balance of shear strength and good adhesion on aluminum. veja menos | |
| AGITAN® A206E | Munzing Chemie | AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acry...veja mais AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, and latex-based adhesives, and industrial water-based and wood coatings, as well as traffic paint. veja menos | |
| RAYCORE® 9021A | Specialty Polymers, Inc. | RAYCORE® 9021A is anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV protection. RAYCORE® 9021A properties allow it to adhere to several different surfaces and be formulated with...veja mais RAYCORE® 9021A is anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV protection. RAYCORE® 9021A properties allow it to adhere to several different surfaces and be formulated with low VOC. The primary use for this product is to apply a thin coat to the surface and provide UV and scratch protection and water resistance. veja menos | |
| CN971J75 | Sartomer Americas | O CN971J é um éter aromático a base de oligômero triacrilato de uretano misturado com 25% SR506, acrilato isobornílico. É um oligômero robusto recomendado para tintas curáveis a UV/EB. | |
| CN9026 | Sartomer Americas | O CN9026 é um acrilato de uretano alifático altamente funcional projetado para uso em revestimentos rígidos ou onde reticulador adicional é necessária. O oligômero oferece menor densidade de reticulador que outros acrilatos de uretano altamente funcionais...veja mais O CN9026 é um acrilato de uretano alifático altamente funcional projetado para uso em revestimentos rígidos ou onde reticulador adicional é necessária. O oligômero oferece menor densidade de reticulador que outros acrilatos de uretano altamente funcionais e é, portanto, mais flexíveis em revestimento mais pesados. O CN9026 tem boa dureza e resistência a arranhões. As aplicações sugeridas incluem: revestimentos de vidro, metálicos e plásticos, tintas de estereolitografia, flexográficas, jato de tinta, litográficas, tela giratória e de tela. veja menos | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...veja mais MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. veja menos | |
| CN9007 | Sartomer Americas | O CN9007 é um oligômero acrilato de uretano alifático bifuncional. Ele confere flexibilidade e resistência à abrasão a tintas e revestimentos curados a UV/EB. O CN9007 também é não-amarelante e de pouca cor. | |
| MIRAMER M600 | Rahn USA Corp. | MIRAMER M600 is a dipentaerythritol hexaacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; screen i...veja mais MIRAMER M600 is a dipentaerythritol hexaacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; screen inks and varnishes; and overprint varnishes. The cured product provides very high cross linked density and chemical resistance. It is used up to 70% in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. veja menos | Request Sample |
| AVANSE™ MV-100 | Univar Solutions | AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field ...veja mais AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field applied finishes for metal, concrete and masonry substrates. It has the ability to be formulated into high performance coating at or below 100 g/L of volatile organic content (VOC). veja menos | Request Sample |
| RHOPLEX™ HG-44P | Univar Solutions | RHOPLEX™ HG-44P is an acrylic co-polymer emulsion developed specifically as a paint vehicle for both interior and light duty exterior high gloss and semigloss enamels. This aqueous latex allows the formulator to make enamel-like paints with the outstandin...veja mais RHOPLEX™ HG-44P is an acrylic co-polymer emulsion developed specifically as a paint vehicle for both interior and light duty exterior high gloss and semigloss enamels. This aqueous latex allows the formulator to make enamel-like paints with the outstanding block resistance, stain removal, and washability needed for indoor use. It has good metal adhesion, resistance to household chemicals and can be formulated for light maintenance applications. veja menos | Request Sample |
| Auroren® AE-202 | PhibroChem | Auroren® AE-202 is a waterborne acrylic modified polyolefin developed with NPC’s original technology. AE-202 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like aluminum. Applicable ...veja mais Auroren® AE-202 is a waterborne acrylic modified polyolefin developed with NPC’s original technology. AE-202 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like aluminum. Applicable fields of AE-202 are coating, primer, ink ingredient, and adhesive for a variety of substrates. This product appears as a white to light brown aqueous liquid. veja menos | Request Sample |
| METOLAT® 600 | Munzing Chemie | METOLAT® 600 a yellowish, clear aqueous solution of modified acrylic copolymer. METOLAT® 600 is an additive designed to increase the water retention of paper coating colours. Due to its moderate thickening effect in combination with high water retention M...veja mais METOLAT® 600 a yellowish, clear aqueous solution of modified acrylic copolymer. METOLAT® 600 is an additive designed to increase the water retention of paper coating colours. Due to its moderate thickening effect in combination with high water retention METOLAT® 600 is recommended for all coating colours in which the water retention should be improved without increasing the viscosity. veja menos | |
| VINAVIL® 4830 | VINAVIL Americas Corp. | VINAVIL® 4830 is a water-based acrylic dispersion that can be used in high gloss emulsion paints, enamels for wall, metal and wood substrates, clear varnishes, and stains, among other uses. This product is free from alkyl phenol ethoxylates (APEO-free), ...veja mais VINAVIL® 4830 is a water-based acrylic dispersion that can be used in high gloss emulsion paints, enamels for wall, metal and wood substrates, clear varnishes, and stains, among other uses. This product is free from alkyl phenol ethoxylates (APEO-free), formaldehyde, plasticizers and coalescing agents. The end product will have high gloss, blocking resistance, chemical and mechanical resistance, and good wet/dry adhesion. veja menos | |
| RHOPLEX™ MULTILOBE 200 | Univar Solutions | RHOPLEX™ MULTILOBE 200 is an APEO (Alkyl Phenol Ethoxylate) surfactant free acrylic emulsion providing outstanding durability, tint retention, and dirt resistance for low VOC exterior flat and satin coatings. This unique technology enhances brush drag, du...veja mais RHOPLEX™ MULTILOBE 200 is an APEO (Alkyl Phenol Ethoxylate) surfactant free acrylic emulsion providing outstanding durability, tint retention, and dirt resistance for low VOC exterior flat and satin coatings. This unique technology enhances brush drag, durability, film build, chalk adhesion and minimized thickener, and surfactant levels in the paint formulation. It also saves on raw material costs with surfactant and defoamers for building tint and minimizing air entrapment. veja menos | Request Sample |
| RHOPLEX™ PR-33 | Univar Solutions | RHOPLEX™ PR-33 is an aqueous, all-acrylic binder designed for exterior and interior primers and stain blocking sealers, which uses ambient crosslinking technology to offer improved performance versus conventional latex polymers. It achieves excellent film...veja mais RHOPLEX™ PR-33 is an aqueous, all-acrylic binder designed for exterior and interior primers and stain blocking sealers, which uses ambient crosslinking technology to offer improved performance versus conventional latex polymers. It achieves excellent film formation blocking stains from migrating through the dry paint film and yields stain blocking performance at high PVC. Enhanced adhesion and excellent durability are additional attributes of this technology. veja menos | Request Sample |
| ACRYSOL™ SCT-275 | Univar Solutions | ACRYSOL™ SCT-275 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener...veja mais ACRYSOL™ SCT-275 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener usage. It offers formulators an excellent balance of sag resistance and leveling, especially in paints utilizing vinyl acrylic binder technology. veja menos | Request Sample |
| CN1967 | Sartomer Americas | CN1967 is a difunctional aliphatic urethane acrylate oligomer. It imparts flexibility and abrasion resistance to UV/EB-cured inks and coatings. CN1967 is also non-yellowing and low in color. | |
| CN104B80Z | Sartomer Americas | CN104B80Z is a difunctional bisphenol A-based epoxy acrylate blended with 20% SR238, hexanediol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer’s bisphenol A-bas...veja mais CN104B80Z is a difunctional bisphenol A-based epoxy acrylate blended with 20% SR238, hexanediol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer’s bisphenol A-based epoxy acrylates. veja menos | |
| CN120B80Z | Sartomer Americas | CN120B80Z is a difunctional bisphenol A-based epoxy acrylate blended with 20% SR238 hexane diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN120, offers the lowest viscosity of Sartomer's bisphenol A-base...veja mais CN120B80Z is a difunctional bisphenol A-based epoxy acrylate blended with 20% SR238 hexane diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN120, offers the lowest viscosity of Sartomer's bisphenol A-based epoxy acrylates. veja menos | |
| GENOMER* 2312 | Rahn USA Corp. | GENOMER* 2312 (epoxidized soy oil acrylate or ESOA) is an epoxy acrylate oligomer with utility in UV and EB free radical inks, coatings and adhesives. It offers moderate functionality and viscosity, excellent flexibility and good adhesion in a variety of ...veja mais GENOMER* 2312 (epoxidized soy oil acrylate or ESOA) is an epoxy acrylate oligomer with utility in UV and EB free radical inks, coatings and adhesives. It offers moderate functionality and viscosity, excellent flexibility and good adhesion in a variety of applications, all with the benefit of low skin irritancy. This product is useful in dispersions where excellent pigment wetting contributes to inks with high gloss, color hold out and substrate adhesion. Likewise, in coatings for paper, metal and wood, GENOMER* 2312 contributes to excellent toughness, flexibility, crease and scuff resistance. veja menos | Request Sample |
| CN2302 | Sartomer Americas | O CN2302 é um oligômero de acrilato de poliéster hiperbranquado projetado com baixa viscosidade e alta funcionalidade. As aplicações sugeridas incluem metal, revestimento à base de água e plásticos, eletrônicos, e tintas flexo e jato de tinta. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. | |
| Acrylated Amine Oligomer SZ 225 | Soltech Ltd | Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehi...veja mais Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehicles, clear paper coatings, wood coatings, and wood fillers. Acrylated Amine Oligomer SZ 225 is 100% polymer solid by weight with a viscosity of 500-1,100 at 25℃. veja menos | |
| Soluryl 20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 20 is a low molecular weight styrene-acryl resin for water-based products. It is a gloss improving additives in water based overprint varnishes to produce a high gloss finish product. | |
| VINAVIL® 2440 | VINAVIL Americas Corp. | VINAVIL® 2440, in the form of a transparent, tacky film, is an anionic/non-ionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive, cement base and vinyl adhesives. This product is compatible with organic resins. It has good peel a...veja mais VINAVIL® 2440, in the form of a transparent, tacky film, is an anionic/non-ionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive, cement base and vinyl adhesives. This product is compatible with organic resins. It has good peel and tack properties as well as good shear strength. VINAVIL® 2440 can also be used in interior or exterior emulsion paints and coatings. veja menos | |
| Vinyltriisopropenyloxysilane | Dalian Onichem Co., Ltd. | O Viniltriisopropeniloxisilano é adequado para sistemas a base de água. Este produto é utilizado em emulsões de vinil e acrílico. | Request Sample |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| VINAVIL® 5845 | VINAVIL Americas Corp. | VINAVIL® 5845, in the form of a transparent, tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used in flexible coating and waterproofing membranes, floor adhesives, cementitious waterproofing membranes, caulks, and roof coatings....veja mais VINAVIL® 5845, in the form of a transparent, tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used in flexible coating and waterproofing membranes, floor adhesives, cementitious waterproofing membranes, caulks, and roof coatings. This product is compatible with cementitious binders and organic resins that are used in the manufacture of construction adhesives or coatings. It is water resistant and shows high tack. veja menos | |
| RAYFLEX® 2024 | Specialty Polymers, Inc. | RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has el...veja mais RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has elongated tensile strength and has low temperature flexibility. The primary use of this product is to be applied to outdoor roofing and provide durability and UV protection. veja menos | |
| GENOMER* 3143 | Rahn USA Corp. | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| AVANSE™ ST-410 | Univar Solutions | AVANSE™ ST-410 is a 100% acrylic water borne emulsion, formulated to meet the toughest VOC standards and still outperform traditional solvent and water borne semitransparent stain technologies. It is easy to apply and doesn't require coalescent or heavy m...veja mais AVANSE™ ST-410 is a 100% acrylic water borne emulsion, formulated to meet the toughest VOC standards and still outperform traditional solvent and water borne semitransparent stain technologies. It is easy to apply and doesn't require coalescent or heavy metal driers to enhance the long lasting appearance of new or weathered wood. It's morphology and unique particle stabilization maximize the flow and lapping characteristics during application while building early resistance properties upon drying. veja menos | Request Sample |
| CN292 | Sartomer Americas | O CN292 é um acrilato de poliéster multifuncional, de baixa viscosidade projetado como um oligômero de reação rápida de uso geral. As suas excelentes propriedades umectantes tornam o CN292 adequado para tintas, em especial as tintas flexográficas. | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| Epoxy Acrylate SE 147 | Soltech Ltd | Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as ...veja mais Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 147 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. veja menos | |
| GENOMER* 4188/EHA | Rahn USA Corp. | GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industr...veja mais GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. veja menos | Request Sample |
| GENORAD* 22 | Rahn USA Corp. | GENORAD* 22 is a low viscosity polymerization inhibitor in acrylic monomer. It is an in-can stabilizer for radically curable inks, coatings and adhesives. Compared to hydroquinone (HQ) and hydroquinone monomethyl ether (HQME), GENORAD*.22 has no or very l...veja mais GENORAD* 22 is a low viscosity polymerization inhibitor in acrylic monomer. It is an in-can stabilizer for radically curable inks, coatings and adhesives. Compared to hydroquinone (HQ) and hydroquinone monomethyl ether (HQME), GENORAD*.22 has no or very low effect on the reactivity of the system. This product is recommended for use in printing inks, inkjet inks, wood coatings and low viscosity systems. veja menos | Request Sample |
| VINAVIL® 5406P | VINAVIL Americas Corp. | VINAVIL® 5406P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/vinyl versatate/acrylic ester in a polyvinyl alcohol colloid that can be used in adhesive mortar, plaster and exterior insulation finish systems. This product is part...veja mais VINAVIL® 5406P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/vinyl versatate/acrylic ester in a polyvinyl alcohol colloid that can be used in adhesive mortar, plaster and exterior insulation finish systems. This product is particularly recommended in the formation of gypsum plasters. The colloid will increase the water-resistance, flexural strength, and mechanical resistance of finished products. veja menos | |
| DEE FO® 806-102 | Munzing Chemie | DEE FO® 806-102 is a liquid opaque off-white defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that provides initial and long-term persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, an...veja mais DEE FO® 806-102 is a liquid opaque off-white defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that provides initial and long-term persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, and latex-based adhesives, as well as in industrial water-based, and wood based coatings, and in traffic paints. veja menos | |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...veja mais Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. veja menos | |
| Rheotech™ 4200 | Arkema Rheology & Specialty Additives | Rheotech™ 4200 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to ...veja mais Rheotech™ 4200 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by brush, especially for finishing touches. veja menos | Request Sample |
| GENORAD* 20 | Rahn USA Corp. | GENORAD* 20 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). This product stabilizes viscosity without reducing the cure speed, and its is recommended for clear coating and white and pastel shades...veja mais GENORAD* 20 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). This product stabilizes viscosity without reducing the cure speed, and its is recommended for clear coating and white and pastel shades. The product is very low in color. Specifically, it can be used in offset varnishes, screen varnishes, flexo varnishes, paper and board varnishes and wood coatings. veja menos | Request Sample |
| Hymod® SB432 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modi...veja mais Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. veja menos | |
| CN961H81 | Sartomer Americas | O CN961H81 é um poliéster anaAlifático a base de oligômero diacrilato de uretano misturado com SR-256, 2(2-etoxietoxi) acrilato de etila. É robusto e oferece boa condição climática. Revestimentos são os usos recomendados para este produto. | |
| CN9782 | Sartomer Americas | O CN9782 é um oligômero acrilato de uretano aromático bifuncional resistente que produz filmes fortes, flexíveis, resistentes à abrasão e curados à radiação. O CN9782 é especialmente recomendado para revestimentos de plástico, têxteis, couro, madeira e me...veja mais O CN9782 é um oligômero acrilato de uretano aromático bifuncional resistente que produz filmes fortes, flexíveis, resistentes à abrasão e curados à radiação. O CN9782 é especialmente recomendado para revestimentos de plástico, têxteis, couro, madeira e metálicos. veja menos | |
| CN9783 | Sartomer Americas | O CN9783 é um oligômero acrilato de uretano aromático bifuncional resistente que produz filmes fortes, flexíveis, resistentes à abrasão e curados à radiação. O CN9783 é especialmente recomendado para revestimentos de plástico, têxteis, couro, madeira e me...veja mais O CN9783 é um oligômero acrilato de uretano aromático bifuncional resistente que produz filmes fortes, flexíveis, resistentes à abrasão e curados à radiação. O CN9783 é especialmente recomendado para revestimentos de plástico, têxteis, couro, madeira e metálicos. veja menos | |
| N3D-P220 | Sartomer Americas | N3D-P220 is a urethane acrylate specifically designed for durable and robust part performance. This particular base resin features a low molecular weight urethane dimethacrylate that can be tailored to your printers light source. | |
| ACRONAL® DS 3570 NA | BASF Dispersions & Resins | Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...veja mais Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. veja menos | |
| EMULSION E-2353 | Univar Solutions | EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and top...veja mais EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer, such as RHOPLEX™ AC-261, to improve on flexibility and toughness. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long-term warranty applications. veja menos | Request Sample |
| Desmophen® NH 1220 | Covestro | Desmophen® NH 1220 resin is a solvent-free, aminefunctional reactive partner for polyisocyanates, and is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® N...veja mais Desmophen® NH 1220 resin is a solvent-free, aminefunctional reactive partner for polyisocyanates, and is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® NH 1220 resin may be used by itself or as a blend with hydroxyfunctional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/ urea clearcoats. veja menos | |
| AGITAN® A203E | Munzing Chemie | AGITAN® A203E is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for printing ink formulations and is also used as a press-side defoamer. It is commonly used for architecutral co...veja mais AGITAN® A203E is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for printing ink formulations and is also used as a press-side defoamer. It is commonly used for architecutral coatings, and corrugated, film and foil, press-side, and screen ink printing inks, as well as PSA, laminating, packaging, envelope, labels, and acrylic adhesives. veja menos | |
| Coapur™ XS 12 | Arkema Rheology & Specialty Additives | Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheo...veja mais Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ XS 12 is a pure associative thickener. veja menos | Request Sample |
| CN989 | Sartomer Americas | O CN989 é um oligômero acrilato de poliéster alifático trifuncional que confere dureza e resistência à abrasão a revestimentos curados a UV/EB. Ele possui alta resistência à temperatura. Revestimentos e revestimentos de metal são os usos recomendados para...veja mais O CN989 é um oligômero acrilato de poliéster alifático trifuncional que confere dureza e resistência à abrasão a revestimentos curados a UV/EB. Ele possui alta resistência à temperatura. Revestimentos e revestimentos de metal são os usos recomendados para este produto. veja menos | |
| CN2261LV | Sartomer Americas | O CN2261LV é um oligômero de acrilato de poliéster. O CN2261LV foi desenvolvido para aplicações de revestimentos de madeira e piso curáveis a UV, onde resistência à abrasão e dureza são necessárias. O CN2261LV demonstra uma taxa de cura excelente e resist...veja mais O CN2261LV é um oligômero de acrilato de poliéster. O CN2261LV foi desenvolvido para aplicações de revestimentos de madeira e piso curáveis a UV, onde resistência à abrasão e dureza são necessárias. O CN2261LV demonstra uma taxa de cura excelente e resistência ao impacto. veja menos | |
| GENOMER* 4188/M22 | Rahn USA Corp. | GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives a...veja mais GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. veja menos | Request Sample |
| Desmophen® NH 1420 | Covestro | Desmophen® NH 1420 resin is a solvent-free, amine-functional reactive partner for polyisocyanates, and is a low viscosity amine functional resin developed for use in the formulation of high solids two-component polyurethane/urea coatings. Desmophen® NH 14...veja mais Desmophen® NH 1420 resin is a solvent-free, amine-functional reactive partner for polyisocyanates, and is a low viscosity amine functional resin developed for use in the formulation of high solids two-component polyurethane/urea coatings. Desmophen® NH 1420 resin may be used by itself or as a blend with hydroxy-functional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/urea clearcoats. veja menos | |
| GENOMER* 4337 | Rahn USA Corp. | GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overpr...veja mais GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overprint varnishes. veja menos | Request Sample |
| CN2921 | Sartomer Americas | O CN2921 é um oligômero de acrilato de uretano alifático desenvolvido para revestimento curáveis a UV e aplicações de tinta onde aderência e excelente resistência às condições meteorológicas são necessárias. O CN2921 adere aos plásticos e aos policarbonat...veja mais O CN2921 é um oligômero de acrilato de uretano alifático desenvolvido para revestimento curáveis a UV e aplicações de tinta onde aderência e excelente resistência às condições meteorológicas são necessárias. O CN2921 adere aos plásticos e aos policarbonatos e tem boa flexibilidade. veja menos | |
| CN929 | Sartomer Americas | O CN929 é um oligômero acrilato de poliéster alifático trifuncional desenvolvido para utilização em tintas e revestimentos de cura a UV e EB. Intemperismo, flexibilidade, baixa viscosidade e cura rápida estão entre os principais atributos do CN929. | |
| CN975 | Sartomer Americas | O CN975 é um oligômero acrilato aromático hexafuncional que oferece excelente resposta de cura, baixa viscosidade e densidade de reticulador muito alta. As aplicações sugeridas incluem: revestimentos, revestimentos de metal e madeira, eletrônicos e tintas...veja mais O CN975 é um oligômero acrilato aromático hexafuncional que oferece excelente resposta de cura, baixa viscosidade e densidade de reticulador muito alta. As aplicações sugeridas incluem: revestimentos, revestimentos de metal e madeira, eletrônicos e tintas. veja menos | |
| RAYCRYL® 918K | Specialty Polymers, Inc. | RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to...veja mais RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate and gives it chemical resistance. The primary use for this product is to be used as a topcoat and provide surfaces such as cement and wood with chemical, water and UV resistance. veja menos | |
| GENOMER* 3498 | Rahn USA Corp. | GENOMER* 3498 is a modified polyetherpolyol acrylate. Resin for radically curable inks, coatings, and adhesives. | Request Sample |
| PRO14072 | Sartomer Americas | PRO14072 is a low viscosity (meth)acrylate providing low residual ash content and high reactivity for the printing of ceramic by SLA/DLP. PRO14072 offers high green strength and flexibility in the development of technical ceramic formulations. | |
| GENORAD* 18 | Rahn USA Corp. | GENORAD* 18 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 18 has low or no effect on the reactivity of the sy...veja mais GENORAD* 18 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 18 has low or no effect on the reactivity of the system. This product is typically used in offset inks and varnishes, letterpress inks, screen inks and varnishes, flexo inks and varnishes, paper and board varnishes and wood coatings. veja menos | Request Sample |
