| ADDITOL® XL 203 | Allnex | Agente catiônico anti-flutuante contendo silicone, agente umectante e agente ddispersante. | Request Sample |
| ADDITOL® XL 204 | Allnex | Agente anti-flutuante, umectante e dispersante, aniônico ativo contendo silicone. | Request Sample |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...veja mais CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. veja menos | |
| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...veja mais CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. veja menos | |
| DISPERBYK®-108 FOR INKS | BYK | It is a wetting and dispersing additive for solvent-borne printing inks. Applications include gravure inks, flexographic inks, and silk screen printing inks. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....veja mais Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". veja menos | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...veja mais R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. veja menos | |
| R-1008-3 | NuSil Silicone Technology 1 | R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with...veja mais R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with long term stability. veja menos | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must ma...veja mais R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). veja menos | |
| R-1008-5 | NuSil Silicone Technology 1 | R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...veja mais R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). veja menos | |
| R-1008-6 | NuSil Silicone Technology 1 | R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must main...veja mais R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). veja menos | |
| R-1008-7 | NuSil Silicone Technology 1 | R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maint...veja mais R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). veja menos | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...veja mais R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). veja menos | |
| TEGO® Therm L 300 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm L 300 is a hybrid polysiloxane dispersion. | Request Sample |
