| Brasmide RW 100 | SGS Polimeros | Brasmide RW 100 is a polyamide resin in aqueous solution of 65% non-volatiles. It has emulsionability with epoxy resin, dispensing the need of emulsifiers and additional surfactants. Brasmide RW 100 is used with epoxy resins in the formulation of finished...veja mais Brasmide RW 100 is a polyamide resin in aqueous solution of 65% non-volatiles. It has emulsionability with epoxy resin, dispensing the need of emulsifiers and additional surfactants. Brasmide RW 100 is used with epoxy resins in the formulation of finished inks, primers, floor coverings, and industrial maintenance inks. veja menos | |
| Disvamide-603 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-603 is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-605 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-605 is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-605 HV | D.S.V. Chemicals Pvt. Ltd. | Disvamide-605 HV is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-610 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-610 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polythene and polyethylene. | |
| Disvamide-611 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-611 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polyethylene and polypropylene. | |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...veja mais Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. veja menos | |
| Flex-Rez™ 1084AS A | Lawter | Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is...veja mais Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is suitable for use in flexo/gravure inks for plastics and foils and in overprint varnishes and coatings. veja menos | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...veja mais Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. veja menos | |
| Flex-Rez™ 2433AD A | Lawter | Flex-Rez™ 2433AD A is an alcohol dilutable polyamide resin that displays good adhesion on substrates like polypropylene, polyethylene and coated foils together with suitable wet-pack resistance. It is considered suitable for use in gravure and flexographi...veja mais Flex-Rez™ 2433AD A is an alcohol dilutable polyamide resin that displays good adhesion on substrates like polypropylene, polyethylene and coated foils together with suitable wet-pack resistance. It is considered suitable for use in gravure and flexographic inks, overprint varnishes and heat-seal coatings. veja menos | |
| Flex-Rez™ 3370CS A | Lawter | Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varn...veja mais Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varnishes and coatings. veja menos | |
| Flex-Rez™ 4584AD A | Lawter | Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics an...veja mais Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics and foil, in cold seal release lacquers and in coatings and overprint varnishes. veja menos | |
| Kingmide 530 | Sanho Chemical Co., Ltd. | Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications. | |
| Kingmide 549 | Sanho Chemical Co., Ltd. | Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 550 | Sanho Chemical Co., Ltd. | Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications. | |
| Kingmide H-135GC | Sanho Chemical Co., Ltd. | Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applic...veja mais Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applications. veja menos | |
| Polyamide Resin PA-108 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-108 is a benzene-soluble stable polyamide resin. It has good solvent release, excellent glossiness, strong adhesive power, and fine gel resistance. This product is well suited for use in gravure printing ink, paper and thin film printin...veja mais Polyamide Resin PA-108 is a benzene-soluble stable polyamide resin. It has good solvent release, excellent glossiness, strong adhesive power, and fine gel resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. veja menos | |
| Polyamide Resin PA-188 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-188 is a benzene-soluble polyamide resin. It has good solvent release, good adhesive power, and good freezing resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing v...veja mais Polyamide Resin PA-188 is a benzene-soluble polyamide resin. It has good solvent release, good adhesive power, and good freezing resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. veja menos | |
| Polyamide Resin PA-308 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-308 is a benzene-soluble polyamide resin. It has good heat resistance, strong adhesive power, fine glossiness, anti-friction, and anti-scratch. This product is well suited for use in heat-resistance printing ink, paper and thin film pri...veja mais Polyamide Resin PA-308 is a benzene-soluble polyamide resin. It has good heat resistance, strong adhesive power, fine glossiness, anti-friction, and anti-scratch. This product is well suited for use in heat-resistance printing ink, paper and thin film printing ink, over-printing varnish, and over-printing ink. veja menos | |
| Polyamide Resin PA-388 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-388 is a benzene-soluble polyamide resin. It has good transparency, strong adhesive power, outstanding glossiness, and good pigment wettability. This product is well suited for use in gravure printing ink, paper and thin film printing i...veja mais Polyamide Resin PA-388 is a benzene-soluble polyamide resin. It has good transparency, strong adhesive power, outstanding glossiness, and good pigment wettability. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. veja menos | |
| Polyamide Resin PA-508 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-508 is a alcohol-soluble polyamide resin. It has good solvent release and strong adhesive power. This product is well suited for use in gravure printing ink, flexo printing ink, and over-printing varnish. | |
| Polyamide Resin PA-588 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-588 is a alcohol-soluble polyamide resin. It has outstanding glossiness, higher softening point, low freezing point, and good transparency. This product is well suited for use in gravure printing ink, flexo printing ink, and over-printi...veja mais Polyamide Resin PA-588 is a alcohol-soluble polyamide resin. It has outstanding glossiness, higher softening point, low freezing point, and good transparency. This product is well suited for use in gravure printing ink, flexo printing ink, and over-printing varnish. veja menos | |
| Polyamide Resin TK 1014 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-140 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1014 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 1417 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 140-170 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1417 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 1720 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 170-200 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1720 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 2000 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 120-170 mpa.s at 25°C, and has a softening point of 115-125°C. Polyamide Resin TK 2000 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 588B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-180 mpa.s at 25°C, and has a softening point of 105-115°C. Polyamide Resin TK 588B finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 588C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 100-180°C. Polyamide Resin TK 588C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 688B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freez...veja mais Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 110-180 mpa.s at 25°C, and has a softening point of 120-200°C. Polyamide Resin TK 688B finds application in gravure plastics, printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 688C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 120-180°C. Polyamide Resin TK 688C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 7010 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 70-100 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 7010 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| RESISTHERM™ AI 244 L | Allnex | RESISTHERM® AI 244 L can be used as a binder for the formulation of one-component baking coatings with outstanding resistance to heat and chemicals. | Request Sample |
| Tohmide 393 | Sanho Chemical Co., Ltd. | Tohmide 393 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 110-120°C. Tohmide 393 is most commonly used in rotogravure printing ink and varnish formulation applications. | |
| Tohmide 394-N | Sanho Chemical Co., Ltd. | Tohmide 394-N is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 394-N is most commonly used in rotogravure printing ink formulation applications. | |
| Tohmide 90 | Sanho Chemical Co., Ltd. | Tohmide 90 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 90 is most commonly used in rotogravure printing ink formulation applications. | |
| Tohmide 92 | Sanho Chemical Co., Ltd. | Tohmide 92 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 115-125°C. Tohmide 92 is most commonly used in flexographic printing ink formulation applications. | |
| Tohmide TXC-245A | Sanho Chemical Co., Ltd. | Tohmide TXC-245A is a solid-type polyamide resin in a brown-colored pellet form. This product has a viscosity of 1000-2000 mPa.s and a softening point of 85-95°C. Tohmide TXC-245A is most commonly used in heat transfer ink formulation applications. |
