| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| AQUACER 1040 | BYK | AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting. | |
| AQUACER 1063 | BYK | AQUACER 1063 is a polyethylene dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector. | |
| AQUACER 8075 | Univar Solutions | AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio o...veja mais AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8075 is compatible with all known polymer dispersions and plasticizers. veja menos | |
| Chlorinated Polyolefin-YURON CP 20 | Yuron New Material | YURON CP 20 é composto por poliolefina clorada e é fornecido na forma de pó branco que é imiscível em água. Este produto é recomendado como aglutinante para revestimentos de plástico ou de aço. | |
| Dispurez 101 | Incorez Ltd. | Dispurez 101 é uma dispersão de poliuretano à base de água de Tg elevado, duro, cristalino com excelente resistência química. É adequado para acabamos e lacas transparentes e protetoras. Ao aplicar, a água se evapora para produzir um filme resistente, tra...veja mais Dispurez 101 é uma dispersão de poliuretano à base de água de Tg elevado, duro, cristalino com excelente resistência química. É adequado para acabamos e lacas transparentes e protetoras. Ao aplicar, a água se evapora para produzir um filme resistente, transparente e com bom brilho. Os filmes derivados de Dispurez 101 apresentam excelente resistência a água e produtos químicos. O produto apresenta rápido desenvolvimento da dureza e, portanto, é apropriado para uma ampla gama de aplicações finais nas indústrias de revestimentos de superfície. É adequado principalmente como um revestimento duro para substratos de plástico rígidos. veja menos | |
| EBECRYL® 11 | Allnex | EBECRYL® 11 is a polyethylene glycol diacrylate derivative. Ebecryl®11, being 100% water soluble, is designed for use in applications needing this type of solubility. | Request Sample |
| Flexonic™ 37 A | Lawter | Flexonic™ 37 A is a nonionic, high-density polyethylene wax emulsion that functions as an additive in coatings and water-based inks where rub resistance, slip and block resistance and/or hardness are required. It can be used as an additive in wood, metal ...veja mais Flexonic™ 37 A is a nonionic, high-density polyethylene wax emulsion that functions as an additive in coatings and water-based inks where rub resistance, slip and block resistance and/or hardness are required. It can be used as an additive in wood, metal and paper coatings and in overprint varnishes where hardness and slip are needed, without much degradation of gloss. veja menos | |
| High Chlorinated Polyethylene-YURON HCPE | Yuron New Material | HCPE é solúvel em etilenoglicol aromático, éster, cetona. Tem uma boa compatibilidade com a maioria dos pigmentos orgânicos e inorgânicos, além disso, e tem uma boa resistência às intempéries, bem como resistência à química, resistência ao óleo e resistên...veja mais HCPE é solúvel em etilenoglicol aromático, éster, cetona. Tem uma boa compatibilidade com a maioria dos pigmentos orgânicos e inorgânicos, além disso, e tem uma boa resistência às intempéries, bem como resistência à química, resistência ao óleo e resistência ao ozônio. HCPE pode substituir a borracha clorada em muitas áreas de aplicação. HCPE é usado principalmente para a produção de revestimentos de resistentes à desgaste, a auto-extinção e à corrosão pesada. Como revestimento, pode ser usado em equipamentos químicos, dutos de campos de petróleo, instalações costeiras, revestimentos de navios, metalurgia e minas, indústria de sal, área de pesca, tratamento de resíduos, instalações de transporte, embalagem e equipamentos elétricos. veja menos | |
| High Chlorinated Polyethylene-YURON HCPE-M | Yuron New Material | HCPE é solúvel em etilenoglicol aromático, éster, cetona. Tem uma boa compatibilidade com a maioria dos pigmentos orgânicos e inorgânicos, além disso, e tem uma boa resistência às intempéries, bem como resistência à química, resistência ao óleo e resistên...veja mais HCPE é solúvel em etilenoglicol aromático, éster, cetona. Tem uma boa compatibilidade com a maioria dos pigmentos orgânicos e inorgânicos, além disso, e tem uma boa resistência às intempéries, bem como resistência à química, resistência ao óleo e resistência ao ozônio. HCPE pode substituir a borracha clorada em muitas áreas de aplicação. HCPE é usado principalmente para a produção de revestimentos de resistentes à desgaste, a auto-extinção e à corrosão pesada. Como revestimento, pode ser usado em equipamentos químicos, dutos de campos de petróleo, instalações costeiras, revestimentos de navios, metalurgia e minas, indústria de sal, área de pesca, tratamento de resíduos, instalações de transporte, embalagem e equipamentos elétricos. veja menos | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1305 | Yuron New Material | HPE 1515 tem uma viscosidade à temperatura de 25 ° C, que é de 40% em xileno a 400-600 mPa.s. Tem aplicações que produzem resistência ao desgaste, à corrosão pesada, à auto-extinção, em adesivos de alta definição e em tinta de impressão de alta qualidade. | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1505 | Yuron New Material | YURON HPE1505 é um polietileno altamente clorado de alto desempenho. É fornecido na forma de pó branco e não é miscível em água. Este produto é utilizado principalmente para promover a resistência ao desgaste, resistência à corrosão pesada, e auto-extin...veja mais YURON HPE1505 é um polietileno altamente clorado de alto desempenho. É fornecido na forma de pó branco e não é miscível em água. Este produto é utilizado principalmente para promover a resistência ao desgaste, resistência à corrosão pesada, e auto-extinção em revestimentos e em tinta de impressão de alta qualidade. veja menos | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1510 | Yuron New Material | HPE 1510 tem uma viscosidade à temperatura de 25 ° C, que é de 40% em xileno a 150-250 mPa.s. Tem aplicações que produzem resistência ao desgaste, à corrosão pesada, à auto-extinção, em adesivos de alta definição e em tinta de impressão de alta qualidade. | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1515 | Yuron New Material | HPE 1515 tem uma viscosidade à temperatura de 25 ° C, que é de 40% em xileno a 400-600 mPa.s. Tem aplicações que produzem resistência ao desgaste, à corrosão pesada, à auto-extinção, em adesivos de alta definição e em tinta de impressão de alta qualidade. | |
| Optirub™ OP A | Lawter | Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems an...veja mais Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax flotation and defoamer interactions. Optirub™ OP A is used in flexographic and packaging gravure inks as well as publication gravure inks and aqueous overprint varnishes. veja menos | |
| Optirub™ PC A | Lawter | Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC ...veja mais Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC A is suitable for use in flexographic and gravure inks, in heatset and sheet-fed inks and in UV metal deco inks. veja menos | |
| Optirub™ SP1 A | Lawter | Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single c...veja mais Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single component system. OptiruB™ SP1 A is used in flexographic and gravure inks and in heatset, sheet-fed, UV and metal decorating inks. veja menos | |
| POLYBATCH® CRR 3971 | ICO Polymers | POLYBATCH® CRR 3971 is a low density polyethylene masterbatch combined with a chill roll release agent. This solid pellet prevents low density polyethylene (LDPE) from chill roll sticking during extrusion without damaging the adhesion of the resin to the ...veja mais POLYBATCH® CRR 3971 is a low density polyethylene masterbatch combined with a chill roll release agent. This solid pellet prevents low density polyethylene (LDPE) from chill roll sticking during extrusion without damaging the adhesion of the resin to the substrate. POLYBATCH® CRR 3971 is used in extrusion lamination, coextrusion coating, and for coatings on different substrates such as kraft, board and paper, aluminum foil, and flexible films. It is also used in extrusion coating applications where chill roll adhesion occurs under normal circumstances, and at very high line speeds featuring high chill roll temperatures and use of a glossy chill roll finish. veja menos | |
| Regalflex™ E1016PL-1 | Univar Solutions | Regalflex™ E1016PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. | |
| Regalflex™ E1060 | Univar Solutions | Regalflex™ E1060 is a copolymer of propylene and ethylene, having a melt viscosity of 6000 mPa·s at 190°C. | |
| Regalflex™ E1060PL | Univar Solutions | Regalflex™ E1060PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder, having a melt viscosity of 5,700 mPa·s at 190°C. | |
| Regalflex™ E1060PL-1 | Univar Solutions | Regalflex™ E1060PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder, having a melt viscosity of 6,000 mPa·s at 190°C. | |
| Regalflex™ E1200PL | Univar Solutions | Regalflex™ E1200PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder, having a melt viscosity of 17,000 mPa·s at 190°C. | |
| Regalflex™ M1018PL-1 | Univar Solutions | Regalflex™ M1018PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polyethylene powder. The resulting blend has a melt viscosity of 1,800 mPa·s at 190°C. | |
| Regalflex™ M1030PL-1 | Univar Solutions | Regalflex™ M1030PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. The resulting blend has a melt viscosity of 3,000 mPa·s at 190°C. | |
| Stirinol™ 350 A | Lawter | Stirinol™ 350 A is a coatable polyethylene and PTFE heatset compound to give good gloss retention, rub resistance and slip in heatset inks. It resists re-crystallization at ink-processing temperature. Stirinol™ 350 A is suitable for use in heatset inks. | |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...veja mais Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. veja menos | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...veja mais Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. veja menos | |
| Ultrapoly™ 211 A | Lawter | Ultrapoly™ 211 A is a sheet-fed polyethylene and PTFE compound blend dispersed in a hard drying binder and is recommended in instances where heat resistance, abrasion and a high degree of slip are required. It is fast setting and non-volatile and protects...veja mais Ultrapoly™ 211 A is a sheet-fed polyethylene and PTFE compound blend dispersed in a hard drying binder and is recommended in instances where heat resistance, abrasion and a high degree of slip are required. It is fast setting and non-volatile and protects film in the earliest phases of the printing process. Ultrapoly™ 211 A is suitable for use in sheet-fed offset inks and in UV, OPV inks. veja menos | |
| Ultrapoly™ 213 A | Lawter | Ultrapoly™ 213 A is a sheet-fed polyethylene and PTFE compound that is dispersed in a non-volatile, hard-drying binder. It boasts gloss retention and lubricity, with abrasion and mar resistance as added features. Ultrapoly™ 213 A can be used in sheet-fed ...veja mais Ultrapoly™ 213 A is a sheet-fed polyethylene and PTFE compound that is dispersed in a non-volatile, hard-drying binder. It boasts gloss retention and lubricity, with abrasion and mar resistance as added features. Ultrapoly™ 213 A can be used in sheet-fed and heatset inks, in UV and metal decorating inks. veja menos | |
| Ultrapoly™ 215 A | Lawter | Ultrapoly™ 215 A is a blend of sheet-fed polyethylene and PTFE compounds in instances where a high degree of lubricity is called for and where mar, heat and abrasion resistance are also necessary. It is fast-setting and non-volatile and protects the film ...veja mais Ultrapoly™ 215 A is a blend of sheet-fed polyethylene and PTFE compounds in instances where a high degree of lubricity is called for and where mar, heat and abrasion resistance are also necessary. It is fast-setting and non-volatile and protects the film in the earliest phase of the printing cycle. Ultrapoly™ 215 A can be used in sheet-fed offset inks and metal decorating inks. veja menos | |
| Ultrapoly™ 2300 A | Lawter | Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip a...veja mais Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip are needed. The product is fast-setting and non-volatile and protects film in the earliest phase of printing while developing toughness over time. Ultrapoly™ 2300 A is considered ideal for use in sheet-fed offset inks and in UV and OPV metal decorating inks. veja menos |
