| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| Anti-static Primer/B3320K | Tianjin Boyuan New Materials Co., Ltd. | B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation. | |
| Adhesion Reinforcing Primer/B3325 | Tianjin Boyuan New Materials Co., Ltd. | B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material. | |
| Stainban® 185 | WPC Technologies, Inc. | Stainban® 185 is an aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 17.5-19.0% and a specific gravity of 1.27-1.35 g/cm3. It is most commonly used in water-based primer applications intended for w...veja mais Stainban® 185 is an aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 17.5-19.0% and a specific gravity of 1.27-1.35 g/cm3. It is most commonly used in water-based primer applications intended for wood protection. veja menos | |
| Stainban® 186 | WPC Technologies, Inc. | Stainban® 186 is a zinc-free, odorless, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 41-43% and a specific gravity of 1.5-1.6 g/cm3. It is most commonly used in water-based primer applications. | |
| Stainban® 187 | WPC Technologies, Inc. | Stainban® 187 is a zinc free, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 28-36% and a specific gravity of 1.37-1.41 g/cm3. It is most commonly used in water-based primer applications intended...veja mais Stainban® 187 is a zinc free, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 28-36% and a specific gravity of 1.37-1.41 g/cm3. It is most commonly used in water-based primer applications intended for wood protection. veja menos | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W é um primer aquoso e promotor de adesão desenvolvido para resolver os problemas de aderência em substratos críticos, como misturas e plásticos poliolefínicos. Este grau apresenta um teor não-volátil de 30% ± 1,5. Este produto é ap...veja mais Special-Primer PP 3200 W é um primer aquoso e promotor de adesão desenvolvido para resolver os problemas de aderência em substratos críticos, como misturas e plásticos poliolefínicos. Este grau apresenta um teor não-volátil de 30% ± 1,5. Este produto é apresentado como um líquido turvo acastanhado de baixa viscosidade. Special-Primer PP 3200 W pode ser utilizado como promotor de adesão pela incorporação em adesivos, tintas de impressão e tintas em caso de compatibilidade suficiente ou diluída até 10% de teor de sólidos como primer. veja menos | |
| PAT-ADD DA 817 | Patcham USA | PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particula...veja mais PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting agents, and prevents hard sedimentation in waterborne as well as solvent-borne primers. veja menos | Request Sample |
| 3# Water-Based Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | 3# Water-Based Sealing Coating is a transparent coating. It is used as a coating for its transparency, and adhesion. It is commonly used in various kinds of primer and does not change the properties of the primer. | |
| ASCONIUM® 143 | ASCOTEC | ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...veja mais HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. veja menos | Request Sample |
| PAT-ADD AF 31 | Patcham USA | PAT-ADD AF 31 é um antiespumante facilmente dispersável para uso em revestimentos a base de água como vernizes, revestimentos de madeira, tintas industriais, tintas aquosas e dispersões de pigmentos. PAT-ADD AF 31 é livre de óleo e com base em composto po...veja mais PAT-ADD AF 31 é um antiespumante facilmente dispersável para uso em revestimentos a base de água como vernizes, revestimentos de madeira, tintas industriais, tintas aquosas e dispersões de pigmentos. PAT-ADD AF 31 é livre de óleo e com base em composto polisiloxano. Embora desenvolvido especialmente para o uso em tintas e vernizes e baixa pigmentação, PAT-ADD AF 31 é muito versátil na aplicação, tão eficiente em diversos sistemas aquáticos para efeitos anti-espumantes durante a fabricação e aplicação. veja menos | Request Sample |
| ASCOTRAN® H10 | ASCOTEC | ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...veja mais ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). veja menos | Request Sample |
| ASCONIUM® 142DA | ASCOTEC | ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
| ASCONIUM® 114 | ASCOTEC | ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins. | Request Sample |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne...veja mais HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. veja menos | Request Sample |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...veja mais HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. veja menos | Request Sample |
| ASCOTRUST® X4 | ASCOTEC | ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| Amirez 148/010 | Incorez Ltd. | Incorez 148/010 é um agente de cura poliamina adutor reativo para resinas epóxi. Vai emulsionar resinas epóxi mais líquidas. Também pode reticular epóxis por reação química para produzir polímeros resistentes e duráveis. Este produto possui uma longa vida útil, baixa viscosidade, VOC zero e boa estabilidade de congelamento / descongelamento. É completamente compatível com o cimento e o sal de cálcio e é particularmente fica bem adaptado em climas de temperatura elevada. Incorez 148/010 é usado em tintas para pavimentos e paredes, revestimentos de higiene, primer...veja mais Incorez 148/010 é um agente de cura poliamina adutor reativo para resinas epóxi. Vai emulsionar resinas epóxi mais líquidas. Também pode reticular epóxis por reação química para produzir polímeros resistentes e duráveis. Este produto possui uma longa vida útil, baixa viscosidade, VOC zero e boa estabilidade de congelamento / descongelamento. É completamente compatível com o cimento e o sal de cálcio e é particularmente fica bem adaptado em climas de temperatura elevada. Incorez 148/010 é usado em tintas para pavimentos e paredes, revestimentos de higiene, primers de concreto, e em tintas brilhantes. veja menos | |
| SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment | Univar Solutions | SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment. This product is mainly used for water-b...veja mais SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment. This product is mainly used for water-borne paint systems, general industrial coatings, maintenance and protective coating applications and automotive paints. veja menos | |
| ASCOTRUST® X1 | ASCOTEC | ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| Anquamine® 287 Waterborne Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 é um agente de cura epóxi novo à base de água concebido para um uso em sistemas epóxi bi-componentes com resinas epóxi líquidas standard e modificadas sem precisar do emulsificador. E’ fornecido na forma de um líquido de cor âmbar a verde. ...veja mais Anquamine® 287 é um agente de cura epóxi novo à base de água concebido para um uso em sistemas epóxi bi-componentes com resinas epóxi líquidas standard e modificadas sem precisar do emulsificador. E’ fornecido na forma de um líquido de cor âmbar a verde. Os primários feitos com Anquamine® 287 demostram uma excelente adesão ao concreto verde e propriedades de penetração que superam muitas outras tecnologias de agentes de cura a base aquosa. Pode ser formulado também em pavimentos epóxi a base de cimento, primários para concreto verde, agente de cura para concreto e primário para concreto antigo e novo. veja menos | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primer...veja mais HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. veja menos | Request Sample |
| ASCOTRAN® H17 | ASCOTEC | ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...veja mais ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). veja menos | Request Sample |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIFLEX ® 348 é um copolímero amarelado, opaco, líquido, bisfenol-A-epóxi-silicone. Este modificador de resina reativo é utilizado no primer / preenchimento e revestimento superior em formulações a base de resina epóxi de cura térmica de 2 componentes l...veja mais ALBIFLEX ® 348 é um copolímero amarelado, opaco, líquido, bisfenol-A-epóxi-silicone. Este modificador de resina reativo é utilizado no primer / preenchimento e revestimento superior em formulações a base de resina epóxi de cura térmica de 2 componentes livres de solvente e à base de solvente. Não tem nenhuma diminuição da transparência e uma melhoria excelente na flexibilidade. Também aumenta a aderência e possui grande resistência à água. ALBIFLEX ® 348 tem boa preservação da densidade da rede, sem qualquer alteração nas propriedades mecânicas além de boa compatibilidade com resinas epóxi aromáticas. veja menos | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primer...veja mais HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. veja menos | Request Sample |
| Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...veja mais Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. veja menos | |
| Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...veja mais Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. veja menos | |
| Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...veja mais Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. veja menos | |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...veja mais HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. veja menos | Request Sample |
| ORDISOL SWT-45 | Concentrol, S.A., Productos | ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer...veja mais ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer coatings. veja menos | |
| MONORAL® 420-20 | HS CHEM CO.,LTD | MONORAL® 420-20 is a light yellow hard paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic pa...veja mais MONORAL® 420-20 is a light yellow hard paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint, and industrial coating systems. veja menos | |
| MONORAL® 60X | HS CHEM CO.,LTD | MONORAL® 60X is a hard light yellow paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint...veja mais MONORAL® 60X is a hard light yellow paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint, enamels, and industrial coating systems. veja menos | |
| Coadis™ 144 A | Arkema Rheology & Specialty Additives | Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized...veja mais Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potentien which providing ideal viscosity, flow and wet adhesion from flat to high gloss systems. veja menos | |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...veja mais HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. veja menos | Request Sample |
| Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...veja mais Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. veja menos | Request Sample |
| Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...veja mais Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. veja menos | |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primer...veja mais HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. veja menos | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...veja mais HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. veja menos | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer...veja mais HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. veja menos | Request Sample |
| Loxanol® MI 6730 | BASF Formulation Additives | Loxanol® MI 6730 é uma solução aquosa de um polímero catiônico utilizado como primer nas aplicações de revestimento, onde ele melhora a aderência ao substrato. Podem ser obtidas melhorias consideráveis com o uso de Loxanol® MI 6730 como primer, principalm...veja mais Loxanol® MI 6730 é uma solução aquosa de um polímero catiônico utilizado como primer nas aplicações de revestimento, onde ele melhora a aderência ao substrato. Podem ser obtidas melhorias consideráveis com o uso de Loxanol® MI 6730 como primer, principalmente nos sistemas de cura UV, que muitas vezes apresentam aderência pobre por causa da redução do volume. veja menos | |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...veja mais HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. veja menos | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer...veja mais HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. veja menos | Request Sample |
| TEGO® Wet 251 | Evonik Operations GmbH, BL Coating Additives | TEGO ® Wet 251 é um aditivo universal de umedecimento do substrato. É um copolímero líquido de poliéter-siloxano. Este produto é adequado para sistemas transparentes, pigmentados e à base de água.TEGO ® Wet 251 pode ser utilizados no primer / revestimento...veja mais TEGO ® Wet 251 é um aditivo universal de umedecimento do substrato. É um copolímero líquido de poliéter-siloxano. Este produto é adequado para sistemas transparentes, pigmentados e à base de água.TEGO ® Wet 251 pode ser utilizados no primer / revestimento de base e no revestimento superior para revestimentos de alta pigmentação. A adição deste produto no revestimento pode ser feito como fornecido ou com pré-diluição. veja menos | Request Sample |
| Methyltriethoxysilane | Zhejiang Wynca Chemical Industry Group | Methyltriethoxysilane is a colorless clear liquid used as a water repellant and primer for hard coating of plastic and synthesis for cross-linked resin. | |
| TEGO® Phobe 6510 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 6510 is a formulation of a polysiloxane resin / silane-blend for waterborne impregnations and primers. | Request Sample |
| Nubirox 106 | Ferro Pigments | O Nubirox 106 é um pigmento Anti-corrosivo branco sem rotulação. É um Fosfato-Molidbato de Zinco Organofilizado que exibe excelente desempenho e eficiência de custo em sistemas com base em solvente e com base em água, sendo adequado para aplicações de fil...veja mais O Nubirox 106 é um pigmento Anti-corrosivo branco sem rotulação. É um Fosfato-Molidbato de Zinco Organofilizado que exibe excelente desempenho e eficiência de custo em sistemas com base em solvente e com base em água, sendo adequado para aplicações de filme fino (tais como Revestimentos de Bobina). veja menos | |
| Amirez 148/024 | Incorez Ltd. | Incorez 148/024 é um agente de cura poliamina adutor reativo para resinas epóxi. Vai emulsionar resinas epóxi mais líquidas. Também pode reticular epóxis por reação química para produzir polímeros resistentes e duráveis. Este produto possui uma longa vida útil, baixa viscosidade, VOC zero e boa estabilidade de congelamento / descongelamento. É completamente compatível com o cimento e o sal de cálcio e é particularmente fica bem adaptado em climas de temperatura elevada. Incorez 148/010 é usado em tintas para pavimentos e paredes, revestimentos de higiene, primer...veja mais Incorez 148/024 é um agente de cura poliamina adutor reativo para resinas epóxi. Vai emulsionar resinas epóxi mais líquidas. Também pode reticular epóxis por reação química para produzir polímeros resistentes e duráveis. Este produto possui uma longa vida útil, baixa viscosidade, VOC zero e boa estabilidade de congelamento / descongelamento. É completamente compatível com o cimento e o sal de cálcio e é particularmente fica bem adaptado em climas de temperatura elevada. Incorez 148/010 é usado em tintas para pavimentos e paredes, revestimentos de higiene, primers de concreto, e em tintas brilhantes. veja menos | |
| Nubirox FR-10 | Ferro Pigments | O Nubirox FR-10 é um inibidor de líquido com base em nitrito para prevenção de ferrugem de sistemas com base em água sem impactos negativos ao desempenho anti-corrosão em longo prazo do Revestimento. É efetivo em concentrações muito baixas e apresenta ati...veja mais O Nubirox FR-10 é um inibidor de líquido com base em nitrito para prevenção de ferrugem de sistemas com base em água sem impactos negativos ao desempenho anti-corrosão em longo prazo do Revestimento. É efetivo em concentrações muito baixas e apresenta atividade nas fases de vapor e líquida. veja menos | |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...veja mais HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. veja menos | Request Sample |
| TEGO® Wet 270 | Evonik Operations GmbH, BL Coating Additives | Aditivo de umedecimento do substrato. | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primer...veja mais HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. veja menos | Request Sample |
| Dynasylan® HYDROSIL 2627 | Evonik Operations GmbH, BL Silanes | Um oligômero siloxano reativo organofuncional em água, que propicia ao produtor de materiais laminados de alto desempenho, um promotor de aderência entre materiais inorgânicos e polímeros orgânicos. | |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 c...veja mais Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired. veja menos | Request Sample |
| Dynol™ 604 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 604 Surfactant é um agente umectante de alto desempenho, não-iônico, com baixa formação de espuma, baixo VOC, ideal para aplicações de tintas à base aquosa. Este agente umectante pode reduzir ambas as tensões superficiais dinâmicas e estáticas como...veja mais Dynol™ 604 Surfactant é um agente umectante de alto desempenho, não-iônico, com baixa formação de espuma, baixo VOC, ideal para aplicações de tintas à base aquosa. Este agente umectante pode reduzir ambas as tensões superficiais dinâmicas e estáticas como nenhum outro tensoativo. Ele é fornecido na forma de um líquido, 100% ativo. As aplicações típicas incluem tintas para madeira, tintas a impressão, primários de concreto, ceras para pavimento, revestimento de couro, primários e acabamentos para metal/plástico, tintas arquitetônicas, adesivos sensíveis à pressão e mais. veja menos | Request Sample |
| TEGO® Wet 280 | Evonik Operations GmbH, BL Coating Additives | Aditivo de umedecimento do substrato. | Request Sample |
| TEGO® Wet 510 | Evonik Operations GmbH, BL Coating Additives | Aditivo de umedecimento do substrato sem silicone. | Request Sample |
| Aqueous Aminoalkyl Silicone Solutions | Dalian Onichem Co., Ltd. | As soluções de silicone aminoalquilo aquoso são utilizadas para revestimentos a base de água, adesivos, selantes de primers. | Request Sample |
| Anquamine® 728 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Anc...veja mais Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Ancarez® AR 555, and standard liquid epoxy resin. veja menos | Request Sample |
| K-FLEX® 850S Low-VOC Coalescent | LANXESS (former Emerald Performance Materials) | K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and indus...veja mais K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and industrial and protective coatings. It is also effective in nitrocellulosic and acrylic lacquers. Emerald Kalama Chemical was acquired by LANXESS in 2021. veja menos | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer...veja mais EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. veja menos | |
| Silane Coupling Agent KH-550 | Zhejiang Feidian Chemical Co., Ltd. | KH-550 é um agente de acoplamento versátil e amino funcional utilizado em uma ampla faixa de aplicações para oferecer ligações superiores entre substratos inorgânicos e polímeros orgânicos. A porção da molécula que contém silicone fornece uma forte ligação aos substratos. A função primária do amino reage com uma variedade ampla de materiais termofixos, termoplásticos e elastoméricos. Reage com água. Adote medidas para evitar o contato com a umidade atmosférica. É um promotor de adesão superior em silicones RTV e outros selantes híbridos. Também é um componente útil em sistemas de primer...veja mais KH-550 é um agente de acoplamento versátil e amino funcional utilizado em uma ampla faixa de aplicações para oferecer ligações superiores entre substratos inorgânicos e polímeros orgânicos. A porção da molécula que contém silicone fornece uma forte ligação aos substratos. A função primária do amino reage com uma variedade ampla de materiais termofixos, termoplásticos e elastoméricos. Reage com água. Adote medidas para evitar o contato com a umidade atmosférica. É um promotor de adesão superior em silicones RTV e outros selantes híbridos. Também é um componente útil em sistemas de primer para selantes híbridos e de poliuretano. veja menos | |
| HEUCOPHOS® ZMP | Heucotech Ltd./Heubach | Um hidrato ortofosfato de zinco molibdênio básico. | Request Sample |
| Nubirox SP | Ferro Pigments | O Nubirox SP é um Fosfato de Zinco de partícula única e especial. É um pigmento Anti-corrosivo branco com alta superfície específica, muito mais eficiente do que o Fosfato de Zinco convencional. | |
| TEGO® Phobe 6600 | Evonik Operations GmbH, BL Coating Additives | Impermeabilizante para alvenaria com boas propriedades de penetração para a formulação de impregnações e primers à base de aguá para substratos minerais. | Request Sample |
| RHEOLATE® 266 | Elementis | O RHEOLATE® 266 é baseado em um novo polímero de poliuretano ureia poliéster. A atividade foi planejada pela engenharia para oferece um espessamento de alta eficiência em taxas de cisalhamento baixo a médio e viscosidade de pseudoplasticidade. É ideal para sistemas que aplicam em spray or por meio de uma lâmina tais como the demão de acabamento e primer...veja mais O RHEOLATE® 266 é baseado em um novo polímero de poliuretano ureia poliéster. A atividade foi planejada pela engenharia para oferece um espessamento de alta eficiência em taxas de cisalhamento baixo a médio e viscosidade de pseudoplasticidade. É ideal para sistemas que aplicam em spray or por meio de uma lâmina tais como the demão de acabamento e primers, vernizes para móveis e madeira, tintas de manutenção e adesivos. veja menos | |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | COAPUR™ 2025 é um modificador de reologia não-iónico associativo e sem solvente, que propicía uma reologia Newtoniana pura para sistemas à base de água. | |
| BECKOCURE™ EH 2260w/41WA | Allnex | O Beckocure® EH 2260w/41WA é um endurecedor de amina hidrofóbica recomendado para a formulação de revestimentos metálicos a base de água, sem aminas básicas voláteis e solventes. Em combinação com dispersões de epoxi, primers de rápida secagem e demão úni...veja mais O Beckocure® EH 2260w/41WA é um endurecedor de amina hidrofóbica recomendado para a formulação de revestimentos metálicos a base de água, sem aminas básicas voláteis e solventes. Em combinação com dispersões de epoxi, primers de rápida secagem e demão única com excelente proteção contra corrosão e excelentes propriedades anti-escorrimento podem ser formulados. Este produto apresenta um excelente comportamento na aplicação e uma performance muito robusta mesmo em superfícies preparadas insatisfatoriamente. veja menos | Request Sample |
| CYMEL® 325 | Allnex | A resina CYMEL® 325 é um reticulador de melamina de alta imina metilada fornecida em iso-butanol. É altamente reativo e tem uma alta tendência para a auto-condensação fornecendo filmes com dureza muito boa, brilho, resistência química e durabilidade externa. É adequado para uma ampla gama de aplicações para cozimento a base de solvente ou a base de água, tal como formulações para revestimentos de bobinas e latas, primer...veja mais A resina CYMEL® 325 é um reticulador de melamina de alta imina metilada fornecida em iso-butanol. É altamente reativo e tem uma alta tendência para a auto-condensação fornecendo filmes com dureza muito boa, brilho, resistência química e durabilidade externa. É adequado para uma ampla gama de aplicações para cozimento a base de solvente ou a base de água, tal como formulações para revestimentos de bobinas e latas, primers automotivos e demãos finais e revestimentos industriais em geral. veja menos | Request Sample |
| Coadis™ BR 85 | Arkema Rheology & Specialty Additives | Combinando a experiência de produtores de emulsão alquídicas ao conhecimento de sistemas à base de aguá, COATEX projetou o COADIS™ BR 85, um dispersante específico para sistemas de a emulsão alquídicas. Os agentes de ligação de emulsão alquídicas interage...veja mais Combinando a experiência de produtores de emulsão alquídicas ao conhecimento de sistemas à base de aguá, COATEX projetou o COADIS™ BR 85, um dispersante específico para sistemas de a emulsão alquídicas. Os agentes de ligação de emulsão alquídicas interagem em uma maneira específica com pigmentos preenchedores e vários aditivos modificado hidrofobicamente. Sua reatividad é geralmente mais forte, a qual resulta em maior viscosidade, particularmente em taxas baixas de cisalhamento e estabilidade de armazenamento mais pobre. veja menos | |
| Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Este é um engrossante de poliuretano sem solvente recomendado para sistemas à base de água, que deve combinar a alta em viscosidade em latas, com excelente compatibilidade do pigmento, para uso posterior em máquina de pintura ou coloração manual. | |
| Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...veja mais Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. veja menos | |
| Borchi® Gel LW 44 | OMG Borchers GmbH | O Borchi® Gel LW 44 é um espessante não iônico baseado em poliuretano livre de éter glicol e livre de VOC de acordo com as Diretivas Europeias 1999/13/EC e 2004/42/EG. Ele é fabricado utilizando isocianatos alifáticos; desta forma não possui influência negativa no amarelamento e engessamento do filme de revestimento. Mesmo pequenas quantidades do Borchi® Gel LW 44 produzem espessamento significante da fase aquosa. O líquido resultante é um pseudo plástico, isto é, sua viscosidade é inversamente proporcional a sua taxa de cisalhamento. O Borchi® Gel LW 44 é então particularmente adequado para aplicações de baixa viscosidade tais como revestimento por spray ou mergulho de sistemas de tintas com base em água e emulsificáveis com água (tintas e primer...veja mais O Borchi® Gel LW 44 é um espessante não iônico baseado em poliuretano livre de éter glicol e livre de VOC de acordo com as Diretivas Europeias 1999/13/EC e 2004/42/EG. Ele é fabricado utilizando isocianatos alifáticos; desta forma não possui influência negativa no amarelamento e engessamento do filme de revestimento. Mesmo pequenas quantidades do Borchi® Gel LW 44 produzem espessamento significante da fase aquosa. O líquido resultante é um pseudo plástico, isto é, sua viscosidade é inversamente proporcional a sua taxa de cisalhamento. O Borchi® Gel LW 44 é então particularmente adequado para aplicações de baixa viscosidade tais como revestimento por spray ou mergulho de sistemas de tintas com base em água e emulsificáveis com água (tintas e primers de acabamento), sistemas baseados em poliuretano de dois componentes aquosos e sistemas epóxi de dois componente e sistemas de poliéster. Pode também ser utilizado para dispersões de copolímero dependendo do perfil de requerimentos. Particularmente vantajoso neste contexto é seu efeito sobre a viscosidade em condições de baixo cisalhamento. veja menos | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | O agente de controle de espuma Drewplus® S-4385 é projetado para uso em revestimentos de superfície e tintas de impressão. Este produto é especialmente recomendado para revestimentos de madeira, tintas arquitetônicas semi-brilho, de alto brilho e vernize...veja mais O agente de controle de espuma Drewplus® S-4385 é projetado para uso em revestimentos de superfície e tintas de impressão. Este produto é especialmente recomendado para revestimentos de madeira, tintas arquitetônicas semi-brilho, de alto brilho e vernizes de parquet. Excelentes resultados foram também obtidos em iniciadores anti-corrosivos acrílicos, tintas de impressão flexográfica e sistemas baseados em alquidas redutível em água. Este produto é altamente eficiente e apresenta excelente persistência. veja menos | |
| HEUCORIN® RZ | Heucotech Ltd./Heubach | Zinco-5-nitro-isoftalato. | Request Sample |
| Coadis™ 123 K | Arkema Rheology & Specialty Additives | COADIS 123 K é um dissipador versátil sintético que propicía fácil enchimento e dispersão do pigmento, boa estabilidade de armazenamento e melhorada resistência à água para sistemas à base de água. Portanto recomendado para uma grande faixa de sistemas à ...veja mais COADIS 123 K é um dissipador versátil sintético que propicía fácil enchimento e dispersão do pigmento, boa estabilidade de armazenamento e melhorada resistência à água para sistemas à base de água. Portanto recomendado para uma grande faixa de sistemas à base de água. veja menos |
