| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...veja mais CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. veja menos | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...veja mais CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. veja menos | |
| CHS-Alkyd S 622 N 60 | Spolchemie | CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...veja mais CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. veja menos | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...veja mais CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. veja menos | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...veja mais CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. veja menos | |
| CHS-Epoxy 112 | Spolchemie | CHS-Epoxy 112 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 4 solid epoxy resin with epoxide equivalent weight (EEW) range between 900-1050 g/mol. This product is primarily used for manufacture of epoxy esters, ...veja mais CHS-Epoxy 112 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 4 solid epoxy resin with epoxide equivalent weight (EEW) range between 900-1050 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. veja menos | |
| CHS-Epoxy 121 | Spolchemie | CHS-Epoxy 121 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 800-900 g/mol. This product is primarily used for manufacture of epoxy esters,...veja mais CHS-Epoxy 121 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 800-900 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution veja menos | |
| CHS-Epoxy 130 | Spolchemie | CHS-Epoxy 130 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3 solid epoxy resin with epoxide equivalent weight (EEW) range between 700-800 g/mol. This product is primarily used for manufacture of epoxy esters, p...veja mais CHS-Epoxy 130 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3 solid epoxy resin with epoxide equivalent weight (EEW) range between 700-800 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. veja menos | |
| CHS-Epoxy 141 | Spolchemie | CHS-Epoxy 141 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 650-700 g/mol. This product is primarily used for manufacture of epoxy esters, po...veja mais CHS-Epoxy 141 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 650-700 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. veja menos | |
| CHS-Epoxy 160 | Spolchemie | CHS-Epoxy 160 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2 solid epoxy resin with epoxide equivalent weight (EEW) range between 600-650 g/mol. This product is primarily used for manufacture of epoxy esters, powd...veja mais CHS-Epoxy 160 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2 solid epoxy resin with epoxide equivalent weight (EEW) range between 600-650 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. veja menos | |
| CHS-Epoxy 171 | Spolchemie | CHS-Epoxy 171 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 550-600 g/mol. This product is primarily used for manufacture of epoxy esters, po...veja mais CHS-Epoxy 171 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 550-600 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. veja menos | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| Disvaket-200 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-200 is a ketonic resin. This product's melting point range is 105-115 degrees Celsius. It can be used in ballpoint inks and in wood lacquers. | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Filtrez™ 3320 A | Lawter | Filtrez™ 3320 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Filtrez™ 3320 A is considered suitable for use in gravure and flexographic inks and coatings. | |
| Filtrez™ 339 A | Lawter | Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure i...veja mais Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure inks and coatings. veja menos | |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...veja mais Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. veja menos | |
| Flex-Rez™ 1084AS A | Lawter | Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is...veja mais Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is suitable for use in flexo/gravure inks for plastics and foils and in overprint varnishes and coatings. veja menos | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...veja mais Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. veja menos | |
| Flex-Rez™ 4584AD A | Lawter | Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics an...veja mais Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics and foil, in cold seal release lacquers and in coatings and overprint varnishes. veja menos | |
| Resygs CG 3070 | SGS Polimeros | Resygs CG 3070 is a pure alkydic resin, in cocunut oil, characterized by its flexibility, weather resistance, retention, color, and shine. This product is used in furniture paints, polyurethanic primers, sealants, varnishes, automotive repainting, and lac...veja mais Resygs CG 3070 is a pure alkydic resin, in cocunut oil, characterized by its flexibility, weather resistance, retention, color, and shine. This product is used in furniture paints, polyurethanic primers, sealants, varnishes, automotive repainting, and lacquers. veja menos | |
| Resygs SPG 4060 | SGS Polimeros | Resygs SPG 4060 is a pure alkyd resin, characterized by its high viscosity, chemical resistance, and hardness. This product is used in furniture paints, primers, sealants, lacquers, fillers, and automotive repainting varnishes. | |
| Resygs SPG 5050 | SGS Polimeros | Resygs SPG 5050 is a conventional alkyd resin. This product is designed for mechanical paints, synthetic paints and primers, automotive repainting, dye concentrates, decorative enamels, and wood varnishes and sealants. | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...veja mais Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. veja menos | |
| WorléeKyd C 632 M | Worlée-Chemie G.m.b.H. | WorléeKyd C 632 M é uma resina alquídica modificada curta em óleo para a fabricação de lacas e tintas resistentes a PVC de combinação NC. W´Kyd C 632 M é utilizada em combinação com nitrocelulose para a fabricação de lacas e tintas resistentes a PVC de co...veja mais WorléeKyd C 632 M é uma resina alquídica modificada curta em óleo para a fabricação de lacas e tintas resistentes a PVC de combinação NC. W´Kyd C 632 M é utilizada em combinação com nitrocelulose para a fabricação de lacas e tintas resistentes a PVC de combinação NC. Não é necessária a adição de resina ureia e catalizador ácido. veja menos | |
| WorléeKyd C 641 | Worlée-Chemie G.m.b.H. | WorléeKyd C 641 é uma resina alquídica de viscosidade extremamente baixa utilizada com nitrocelulose para lacas de nitrocelulose transparentes e pigmentadas além de revestimentos de cura por ácido para madeira, metal e papel. Esta categoria apresenta um t...veja mais WorléeKyd C 641 é uma resina alquídica de viscosidade extremamente baixa utilizada com nitrocelulose para lacas de nitrocelulose transparentes e pigmentadas além de revestimentos de cura por ácido para madeira, metal e papel. Esta categoria apresenta um teor não volátil de 70% ± 1, além de uma liberação muito rápida de solvente, boa repintura a qualquer momento e muito boa resistência contra o amarelamento. veja menos | |
| WorléeSin MK 223 | Worlée-Chemie G.m.b.H. | WorléeSin MK 223 é uma resina maleica plastificada internamente apropriada para uso em lacas de nitrocelulose de alta qualidade com uma boa resistência verificada ao frio e rápida liberação de solvente. W´Sin MK 223 é compatível com resinas de nitrocelulo...veja mais WorléeSin MK 223 é uma resina maleica plastificada internamente apropriada para uso em lacas de nitrocelulose de alta qualidade com uma boa resistência verificada ao frio e rápida liberação de solvente. W´Sin MK 223 é compatível com resinas de nitrocelulose, alquídicas não secantes e curtas em óleo e de ureia-formaldeído. Mesmo pequenas quantidades de W´Sin MK 223 nestas lacas pode melhorar a dureza, resistência a riscos e formação de filme. veja menos | |
| WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 800 (38,5%-41,5% em Isoparaffin HC 170-200) é um alquídico modificado com uretano e longo em óleo com uma estrutura de gel mole. A tixotropia é estável à temperatura e aos solventes polares. É utilizado para a fabricação de revestimentos e la...veja mais WorléeThix V 800 (38,5%-41,5% em Isoparaffin HC 170-200) é um alquídico modificado com uretano e longo em óleo com uma estrutura de gel mole. A tixotropia é estável à temperatura e aos solventes polares. É utilizado para a fabricação de revestimentos e lacas de camada grossa. Esta categoria apresenta um teor não volátil de 40% ± 1.5. As tintas e lacas à base de W´Thix V 800 apresentam boa capacidade de pintura, excelente fluxo e processo de secagem muito bom até com camadas espessas. veja menos | |
| WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 800 (48%-52% em Dearomatized HC 160-200) é um alquídico modificado com uretano longo em óleo com estrutura de gel mole. É utilizado para a fabricação de revestimentos e lacas de camada espessa. Esta categoria apresenta um teor não volátil de ...veja mais WorléeThix V 800 (48%-52% em Dearomatized HC 160-200) é um alquídico modificado com uretano longo em óleo com estrutura de gel mole. É utilizado para a fabricação de revestimentos e lacas de camada espessa. Esta categoria apresenta um teor não volátil de 50% ± 2. W´Thix V 800 é compatível com a maioria das resinas alquídicas secantes médias e longas em óleo. Também é compatível com resinas maleicas e fenólicas duras modificadas. As tintas e lacas à base de W´Thix V 800 apresentam boa capacidade de pintura, excelente fluxo e processo de secagem muito bom até com camadas espessas. Devido ao processo de secagem muito bom, obtém-se uma sobreposição rapidamente. Testes naturais e artificiais para a verificação do frio indicaram uma elasticidade de longo prazo. veja menos |
