| BENCRYL PU 139 | Benasedo | BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is...veja mais BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is curable thorugh EB or UV radiations, when used in combination with photoinitiators. veja menos | |
| BENCRYL PU 141 | Benasedo | BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition o...veja mais BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition of photoinitiators whit small amounts of photoactivator (acrylated amine) veja menos | |
| BENCRYL PU 1515 | Benasedo | BENCRYL PU 1515 is a linear aromatic urethane acrylated oligomer endowed with good flexibility, very good chemicals resistances, hardness and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| BYD-1007 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1007, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in surface coatings for paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyureth...veja mais BYD-1007, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in surface coatings for paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. veja menos | |
| BYD-1308 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1308, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a polish for card paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane...veja mais BYD-1308, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a polish for card paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. veja menos | |
| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...veja mais BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. veja menos | |
| BYD-1348 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil...veja mais BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. veja menos | |
| BYD-1403 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. Th...veja mais BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. This product is non-toxic. Its substrate is an aromatic waterborne polyurethane. veja menos | |
| BYD2610 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water....veja mais BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. veja menos | |
| BYD2620 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and wat...veja mais BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. veja menos | |
| BYD7201 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7201, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a plastic binder for PVC, PS, fabrics, wood, paper, and cement applications. This product offers strong cohesive strength and fast film formation....veja mais BYD7201, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a plastic binder for PVC, PS, fabrics, wood, paper, and cement applications. This product offers strong cohesive strength and fast film formation. Its pH value is 5.0 +/- 1.0. veja menos | |
| BYD7231 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesi...veja mais BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesive strength and thickening effects. Its pH value is 5.0 +/- 1.0. veja menos | |
| CN2264 | Sartomer Americas | O CN2264 é um oligômero de acrilato de poliéster de cor fraca que tem uma rápida resposta de cura. Este produto tem boa dureza e elevada resistência à abrasão, bem como resistência ao calor, produtos químicos e à água. O CN2264 foi desenvolvido para reves...veja mais O CN2264 é um oligômero de acrilato de poliéster de cor fraca que tem uma rápida resposta de cura. Este produto tem boa dureza e elevada resistência à abrasão, bem como resistência ao calor, produtos químicos e à água. O CN2264 foi desenvolvido para revestimentos curáveis a UV/EB, especialmente nos casos em que dureza e resistência à abrasão são necessárias, especialmente para revestimentos de madeira, papel, pisos e tela, jato de tinta, e tintas flexo. veja menos | |
| CN294E | Sartomer Americas | O CN294E é um oligômero poliéster tetrafuncional líquido claro. Este produto tem boa resistência química e ao calor, bem como boa adesão elevada resistência à abrasão. Ele também tem uma resposta de cura rápida, bom comportamento litográfico, e boa umecta...veja mais O CN294E é um oligômero poliéster tetrafuncional líquido claro. Este produto tem boa resistência química e ao calor, bem como boa adesão elevada resistência à abrasão. Ele também tem uma resposta de cura rápida, bom comportamento litográfico, e boa umectação de pigmento. O CN294E é utilizado em tintas curáveis a UV incluindo revestimentos de metal, papel e plástico e tintas flexográficas, de tela e tintas litográficas. veja menos | |
| CN299 | Sartomer Americas | O CN299 é um oligômero poliéster tetrafuncional líquido claro a leitoso. Ele possui resposta rápida de cura, bom comportamento litográficp, boa umectação de pigmento, e equilíbrio hidrófobo/hidrofílico. O CN299 é utilizado em revestimentos e tintas curá...veja mais O CN299 é um oligômero poliéster tetrafuncional líquido claro a leitoso. Ele possui resposta rápida de cura, bom comportamento litográficp, boa umectação de pigmento, e equilíbrio hidrófobo/hidrofílico. O CN299 é utilizado em revestimentos e tintas curáveis a UV incluindo de metal, plástico e papel e tintas flexográficas, de tela e tintas litográficas. Este produto também possui boa resistência química, boa resistência ao calor, alta resistência à abrasão e boa aderência. veja menos | |
| CN9167US | Sartomer Americas | O CN9167US é um oligômero acrilato de uretano aromático líquido claro. Este produto possui excelentes propriedades umectantes de pigmento e de impressão litográfica a UV. Ele também tem utilidade em uma grande variedade de aplicações de revestimento, e co...veja mais O CN9167US é um oligômero acrilato de uretano aromático líquido claro. Este produto possui excelentes propriedades umectantes de pigmento e de impressão litográfica a UV. Ele também tem utilidade em uma grande variedade de aplicações de revestimento, e concede dureza e resistência à abrasão sem fragilidade. As aplicações sugeridas do CN9167US incluem revestimentos de madeira, metal, papel, plástico e tintas litográfico e de tela. veja menos | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| EPOFEN 2319 | Benasedo | EPOFEN 2319 is typically used in packaging coating applications where a pre-formulated coating system is desired or in wash coat applications. | |
| Epokukdo YDB-400 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400H | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400H is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T60 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T60 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly being applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400TE70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400TE70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Flexonic™ 601 A | Lawter | Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming ...veja mais Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming without impacting on water resistance or contributing to incompatibility. Flexonic™ 601 A is suited for use in aqueous flexographic and gravure inks and in aqueous paper, metal, wood and OPV coatings. veja menos | |
| Flexonic™ 902 A | Lawter | Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foa...veja mais Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foaming without impacting on incompatibility or water resistance. Flexonic™ 902 A is suited for use in aqueous flexographic and gravure inks and in aqueous wood, paper, metal and OPV coatings. veja menos | |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...veja mais Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. veja menos | |
| HS9103 | Tianyi Chemical Engineering Material Co., Ltd. | HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good f...veja mais HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good flexibility. veja menos | |
| HS9104 | Tianyi Chemical Engineering Material Co., Ltd. | HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibilit...veja mais HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibility. veja menos | |
| HS9301B | Tianyi Chemical Engineering Material Co., Ltd. | HS9301B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV cured coatings, paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| HS9303B | Tianyi Chemical Engineering Material Co., Ltd. | HS9303B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV-cured coatings like paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| Maleic Anhydride | Hainan Zhongxin Chemical Co., Ltd. | Maleic anhydride is an important organic chemical and raw material. It is primarily used to make unsaturated polyester resins and paints and paper products. It has additional uses as a treatment agent for artificial leather and marble. | |
| Miradull™ 7060 A | Lawter | Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and...veja mais Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and is considered ideal for use in overprints. veja menos | |
| Miradull™ 8689 A | Lawter | Miradull™ 8689 A is an ultra dull sheet-fed overprint varnish that offers premium performance in terms of offset lithography. The dull finish makes it resistant to polishing with good yellowing characteristics. The wax and drier content allows for skinnin...veja mais Miradull™ 8689 A is an ultra dull sheet-fed overprint varnish that offers premium performance in terms of offset lithography. The dull finish makes it resistant to polishing with good yellowing characteristics. The wax and drier content allows for skinning in the can. Other benefits include the highest degree of matte finish, good transparency and hard drying. Miradull™ 8689 A is suitable for use in overprints. veja menos | |
| Picassian® AC-246 | Stahl Polymers | Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...veja mais Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. veja menos | |
| Polurene AC510 | S.A.P.I.C.I. SpA | Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This produ...veja mais Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This product contains less than .7% TDI isocyanates. veja menos | |
| PVP-K12 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emuls...veja mais PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K120 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and e...veja mais PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emuls...veja mais PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying ag...veja mais PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emuls...veja mais PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying ag...veja mais PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K25 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying ag...veja mais PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emuls...veja mais PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying ag...veja mais PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K60 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emuls...veja mais PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emuls...veja mais PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying ag...veja mais PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. veja menos | |
| PVP/VA28W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and vis...veja mais PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| PVP/VA37E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and vis...veja mais PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| PVP/VA55E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is...veja mais PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| PVP/VA55W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and vis...veja mais PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| PVP/VA73E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and vis...veja mais PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| PVP/VA73W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and vis...veja mais PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| PVP/VA84E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is...veja mais PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| PVP/VA84S | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing ...veja mais PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| PVP/VA84W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and vis...veja mais PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. veja menos | |
| Reactol™ 1717H A | Lawter | Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment we...veja mais Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment wetting, gloss and adhesion. Reactol™ 1717H A is used in vinyl sealers and coatings, cellulose lacquers and in flexographic and rotogravure inks. veja menos | |
| Reactol™ 1979 A | Lawter | Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and ni...veja mais Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and nitrocellulose and can be cross-linked with melamine to create a glossy thermoset coating with good color retention. Reactol™ 1979 A is used in flexographic and gravure inks and in paper and wood coatings. veja menos | |
| Reactol™ 3107 A | Lawter | Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use ...veja mais Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use of the resin binder eliminates discoloration tendencies, leading to cleaner colors. The product is used in liquid inks and coatings and in wood stains and lacquers. veja menos | |
| Rexin DP 417 | S.A.P.I.C.I. SpA | Rexin DP 417 is a solventless saturated polyester resin. This product has good elasticity. It can be used in enamels and coatings for paper, leather, plastic and rubber. It is particularly used for the formation of soft-touch effect coatings. | |
| Rexin DP 430 | S.A.P.I.C.I. SpA | Rexin DP 430 is a solventless saturated polyester resin. This product has good elasticity. It can be used in coatings and enamels for leather, plastic, rubber and paper coatings. It is used to formulate soft-touch effect coatings. | |
| Sarbox SB510E35 | Sartomer Americas | O Sarbox SB510E35 é moderadamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, monômero triacrilato trimetilolpropano etoxilatado. Ele oferece excelente cura velocidade, excelente aderência em metal e plástico, boas características ...veja mais O Sarbox SB510E35 é moderadamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, monômero triacrilato trimetilolpropano etoxilatado. Ele oferece excelente cura velocidade, excelente aderência em metal e plástico, boas características umectantes e de fluxo. O Sarbox SB510E35 também possui excelente aderência de película fina ao aço electrocoberto. As aplicações sugeridas deste produto incluem adesivos, plastisóis, tintas de tela, flexogáficas e de gravura e revestimentos de papel, plástico, metal e madeira. veja menos | |
| Sarbox SB520E35 | Sartomer Americas | O Sarbox SB520E35 é moderadamente funcional, ácido carboxílico contendo manômero diacrilato glicol tripopileno oligômero acrilato. Os sólidos reagentes deste produto são 100%. O Sarbox SB520E35 oferece um dos mais rápidos índices de cura da linha de produ...veja mais O Sarbox SB520E35 é moderadamente funcional, ácido carboxílico contendo manômero diacrilato glicol tripopileno oligômero acrilato. Os sólidos reagentes deste produto são 100%. O Sarbox SB520E35 oferece um dos mais rápidos índices de cura da linha de produtos Sarbox, excelente aderência em metais e plásticos, e boas características umectantes e de fluxo. Ele também oferece alta resistência a impactos e flexibilidade, bem como uma boa resistência química, à água e ao calor. Outras aplicações sugeridas para este produto incluem aplicações de tinta, revestimentos de madeira e papel, revestimentos fotorresistentes e máscaras de solda eletrônica. veja menos | |
| Sarbox SB520M35 | Sartomer Americas | O Sarbox SB520M35 é moderadamente funcional, ácido carboxílico contendo manômero diacrilato glicol tripopileno oligômero acrilato. O Sarbox SB520M35 oferece um dos mais rápidos índices de cura da linha de produtos Sarbox, excelente aderência em metais e p...veja mais O Sarbox SB520M35 é moderadamente funcional, ácido carboxílico contendo manômero diacrilato glicol tripopileno oligômero acrilato. O Sarbox SB520M35 oferece um dos mais rápidos índices de cura da linha de produtos Sarbox, excelente aderência em metais e plásticos, e boas características umectantes e de fluxo. Ele também oferece alta resistência a impactos e flexibilidade, bem como uma boa resistência química, à água e ao calor. Outras aplicações sugeridas para este produto incluem aplicações de tinta de tela, flexográficas, e de gravura, revestimentos de madeira e papel, revestimentos fotorresistentes e máscaras de solda eletrônica. veja menos | |
| SmartHide™ | ShayoNano USA, Inc. | SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon z...veja mais SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon zinc oxide composite pigment that can also provide the beneficial functionality of a zinc oxide in a more formula stable manor. This product can be used for ceiling paints, traffic paints, roof coatings, water-based ink, interior and exterior paints, DTM enamel, specialty primers, and paper coatings. veja menos | |
| Stirinol™ 350 A | Lawter | Stirinol™ 350 A is a coatable polyethylene and PTFE heatset compound to give good gloss retention, rub resistance and slip in heatset inks. It resists re-crystallization at ink-processing temperature. Stirinol™ 350 A is suitable for use in heatset inks. | |
| Stirinol™ 97 A | Lawter | Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset in...veja mais Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset inks and hot foil stamping applications. veja menos | |
| Stirinol™ 98 A | Lawter | Stirinol™ 98 A is a heatset wax compound to give good rub and slip in heatset inks used to print catalogs, tabloids and publication inserts. It disperses easily, retains gloss and has good re-crystallization resistance. Stirinol™ 98 A is suitable for use ...veja mais Stirinol™ 98 A is a heatset wax compound to give good rub and slip in heatset inks used to print catalogs, tabloids and publication inserts. It disperses easily, retains gloss and has good re-crystallization resistance. Stirinol™ 98 A is suitable for use in heatset offset inks and in hot foil stamping applications. veja menos | |
| Synkyd™ 50 E | Lawter | Synkyd™ 50 E consists of a vinyl-modified alkyd resin displaying high solubility in mineral distillates and effective water resistance benefits. It has good pigment wetting properties, along with a high gloss and good flow behavior. The product is used in...veja mais Synkyd™ 50 E consists of a vinyl-modified alkyd resin displaying high solubility in mineral distillates and effective water resistance benefits. It has good pigment wetting properties, along with a high gloss and good flow behavior. The product is used in offset, sheet-fed, letterpress and screen ink applications. veja menos | |
| Terlon™ 3010 A | Lawter | Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and...veja mais Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and maintain color strength with little bronzing while providing leveling and flow, ensure the product is an essential formulating tool. Terlon™ 310 A is compatible with most inks, helping to stabilizing ink formulations that don't hold up on long runs. The applications in which it has uses include sheet-fed offset, heatset offset, coldset offset, metal deco and letterpress. veja menos | |
| TKAS-11 Pink | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-11 Pink is a pink fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, scre...veja mais TKAS-11 Pink is a pink fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-12 Cerise | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-12 Cerise is a cerise fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, ...veja mais TKAS-12 Cerise is a cerise fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-13 Red | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-13 Red is a red fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen...veja mais TKAS-13 Red is a red fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-14 Red Orange | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-14 Red Orange is a red orange fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper co...veja mais TKAS-14 Red Orange is a red orange fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-15 Orange | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-15 Orange is an orange fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings,...veja mais TKAS-15 Orange is an orange fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-16 Orange Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-16 Orange Yellow is an orange yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, p...veja mais TKAS-16 Orange Yellow is an orange yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-17 Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-17 Yellow is a yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, ...veja mais TKAS-17 Yellow is a yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-18 Green | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-18 Green is a green fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, sc...veja mais TKAS-18 Green is a green fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-19 Blue | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-19 Blue is a blue fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, scre...veja mais TKAS-19 Blue is a blue fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-20 Lemon Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-20 Lemon Yellow is a lemon yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, pape...veja mais TKAS-20 Lemon Yellow is a lemon yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-21 Rose | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-21 Rose is a rose fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, scre...veja mais TKAS-21 Rose is a rose fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKAS-22 Violet | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-22 Violet is a violet fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, ...veja mais TKAS-22 Violet is a violet fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. veja menos | |
| TKG-2C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-2C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds applicati...veja mais TKG-2C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. veja menos | |
| TKPS-10 Lemon Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-10 Lemon Yellow is a lemon yellow fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recom...veja mais TKPS-10 Lemon Yellow is a lemon yellow fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-11 Green | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-11 Green is a green fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use...veja mais TKPS-11 Green is a green fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-12 Orange Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-12 Orange Yellow is an orange yellow fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is re...veja mais TKPS-12 Orange Yellow is an orange yellow fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-13 Orange | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-13 Orange is an orange fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for ...veja mais TKPS-13 Orange is an orange fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-14 Red Orange | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-14 Red Orange is a red orange fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommend...veja mais TKPS-14 Red Orange is a red orange fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-15 Red | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-15 Red is a red fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in ...veja mais TKPS-15 Red is a red fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-16 Cerise | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-16 Cerise is a cerise fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for u...veja mais TKPS-16 Cerise is a cerise fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-17 Pink | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-17 Pink is a pink fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use i...veja mais TKPS-17 Pink is a pink fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-18 Rose | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-18 Rose is a rose fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use i...veja mais TKPS-18 Rose is a rose fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-19 Blue | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-19 Blue is a blue fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use i...veja mais TKPS-19 Blue is a blue fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-20 White | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-20 White is a white fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use...veja mais TKPS-20 White is a white fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| TKPS-21 Violet | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-21 Violet is a violet fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for u...veja mais TKPS-21 Violet is a violet fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. veja menos | |
| Trionol™ 3 A | Lawter | Trionol™ 3 A is an alkyd for enhancing ink film integrity that comes with good pigment wetting properties and has the ability to improve setting speed, gloss and rub resistance. It can replace drying oils in heatset and quickset inks in order to improve c...veja mais Trionol™ 3 A is an alkyd for enhancing ink film integrity that comes with good pigment wetting properties and has the ability to improve setting speed, gloss and rub resistance. It can replace drying oils in heatset and quickset inks in order to improve compatibility, pigment wetting, rub resistance and solvent tolerance without sacrificing setting speed. The product's viscosity is stable in finished inks. It is ideal for sheet-fed, coldset, heatset, metal deco, silk screen and letterpress applications. veja menos | |
| Trionol™ 33 A | Lawter | Trionol™ 33 A is an alkyd for boosting ink film integrity and provides a tough anchor as it partially penetrates and oxidizes when printed on coated paper. The rest of the product sits on the surface as a film-forming coating that quickly hardens into a r...veja mais Trionol™ 33 A is an alkyd for boosting ink film integrity and provides a tough anchor as it partially penetrates and oxidizes when printed on coated paper. The rest of the product sits on the surface as a film-forming coating that quickly hardens into a rub-resistant and tough print. It has good pigment wetting properties, can improve setting speed, rub resistance and gloss unlike other pigment wetting vehicles that lose setting speed and gloss. The product is used in coldset, heatset and sheet-fed offsets, with other applications in silk screen, metal deco and letterpress inks. veja menos | |
| Trionol™ 7 A | Lawter | Trionol™ 7 A is a specialty alkyd used for boosting ink film integrity. It has good pigment wetting properties and can improve setting speed, gloss and rub resistance. The product can replace drying oils in heatset and quickset systems to improve pigment ...veja mais Trionol™ 7 A is a specialty alkyd used for boosting ink film integrity. It has good pigment wetting properties and can improve setting speed, gloss and rub resistance. The product can replace drying oils in heatset and quickset systems to improve pigment wetting, solvent tolerance, rub resistance and compatibility without sacrificing setting speed. It is ideally used in coldset, heatset and sheet-fed offsets with applications also in letterpress and metal deco inks. veja menos | |
| Ucoflex EW 810/30A | S.A.P.I.C.I. SpA | Ucoflex EW 810/30A is an oleourethanic elastomer. This product has good yellowing, abrasion, and shock resistance. It can be used in clear or pigmented paints for ABS, PVC, PUR, polystyrene or paper. |
