| CV-2644 | NuSil Silicone Technology 1 | CV-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operati...veja mais CV-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operating conditions. This product is well suited to use with form-in-place conductive gaskets. veja menos | |
| CV2-2644 | NuSil Silicone Technology 1 | CV2-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. This product is well suited to use with form-in-place conductive gaskets. It meets the low outgas specifications outlined by NASA and the European Space Agency so it ca...veja mais CV2-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. This product is well suited to use with form-in-place conductive gaskets. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operating conditions. veja menos | |
| CV3-2289-1 | NuSil Silicone Technology 1 | CV3-2289-1 is a two-part white silicone elastomer, that is an ideal adhesive where a large surface area must be covered. It has the ability to provide protection to electrical components against harsh environments where shock, vibration, dust and moisture...veja mais CV3-2289-1 is a two-part white silicone elastomer, that is an ideal adhesive where a large surface area must be covered. It has the ability to provide protection to electrical components against harsh environments where shock, vibration, dust and moisture are a threat. It is also an ideal product for applications that require minimal outgassing. veja menos | |
| CV4-2500 | NuSil Silicone Technology 1 | CV4-2500 is a two-part, optically clear silicone system that has a controlled volatility. It is suitable to be used as an adhesive in low-strength applications such as bonding solar cell arrays where low volatility and clarity are needed. It can also be u...veja mais CV4-2500 is a two-part, optically clear silicone system that has a controlled volatility. It is suitable to be used as an adhesive in low-strength applications such as bonding solar cell arrays where low volatility and clarity are needed. It can also be used as an embedding or potting compound for electronic assemblies that need to be protected from extremes in radiation, humidity, mechanical and thermal stress. veja menos | |
| Epoxies® 40-3900 | Epoxies, Etc. | Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic...veja mais Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic applications. Due to its excellent continuity, it has also been used extensively in applications such as micro-wave EMI and RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connectors, circuitry, and as a cold solder. veja menos | |
| Epoxies® 40-3905 | Epoxies, Etc. | Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epo...veja mais Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epoxy filled with pure silver for improved electrical conduction and heat transfer. It has outstanding adhesion to plastics, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic, and printed circuit boards. 40-3905 can also be thinned with up to 10% Toluol for many coating applications. veja menos | |
| Epoxies® 40-3909 | Epoxies, Etc. | Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternat...veja mais Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternative to many silver filled epoxy systems. 40-3909 has a convenient 1:1 mix ratio by weight and can cure at room temperature overnight but can also be accelerated with mild heat. It is well suited for use in the assembly or repairs of printed circuit boards, connectors, wave guides, high frequency shields, and as a cold solder. veja menos | |
| Epoxies® 40-3911 | Epoxies, Etc. | Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part ...veja mais Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part system cures quickly at elevated temperatures making it a suitable adhesive for many electronic assembly operations. And it is a good choice for lid sealing and die bonding applications. veja menos | |
| R-1130 | NuSil Silicone Technology 1 | R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and ...veja mais R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and connectors. It is ideal for overhead or side wall applications due to its non-slumping characteristics. veja menos |
