| Hauthane L-3466 | Hauthaway | Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicon...veja mais Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. L-3466 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. veja menos | |
| HS9101 | Tianyi Chemical Engineering Material Co., Ltd. | HS9101, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic or wooden coatings. This product has a rapid cure with high flexibility. It shows good hardness and resistance to abrasion. | |
| HS9103 | Tianyi Chemical Engineering Material Co., Ltd. | HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good f...veja mais HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good flexibility. veja menos | |
| HS9104 | Tianyi Chemical Engineering Material Co., Ltd. | HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibilit...veja mais HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibility. veja menos | |
| HS9106 | Tianyi Chemical Engineering Material Co., Ltd. | HS9106, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic paints or wooden paints. This product has good flowability and wetting characteristics. It cures quickly with good flexibility. | |
| HS9501 | Tianyi Chemical Engineering Material Co., Ltd. | HS9501, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in plastic coatings, UV oil inks, and abrasion-resistant wood coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligom...veja mais HS9501, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in plastic coatings, UV oil inks, and abrasion-resistant wood coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. veja menos | |
| HS9502 | Tianyi Chemical Engineering Material Co., Ltd. | HS9502, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in plastic UV top finishes. This product is quite flexible and has low shrinkage. Its substrate is a high-performance oligomer ...veja mais HS9502, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in plastic UV top finishes. This product is quite flexible and has low shrinkage. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. veja menos | |
| HS9510 | Tianyi Chemical Engineering Material Co., Ltd. | HS9510, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in vacuum plating finishes, wood coatings, and metal coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that p...veja mais HS9510, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in vacuum plating finishes, wood coatings, and metal coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. veja menos | |
| HS9545 | Tianyi Chemical Engineering Material Co., Ltd. | HS9545, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in metal or plastic spray coatings. This product is resistant to stains and abrasion. Its substrate is an oligomer that performs well in radiation or peroxid...veja mais HS9545, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in metal or plastic spray coatings. This product is resistant to stains and abrasion. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. veja menos | |
| HS9555 | Tianyi Chemical Engineering Material Co., Ltd. | HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof...veja mais HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof and plates easily. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. veja menos | |
| HS9732 | Tianyi Chemical Engineering Material Co., Ltd. | HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provi...veja mais HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provides a good balance between water and inks. veja menos | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| Hydrorexin PU 5855 | S.A.P.I.C.I. SpA | Hydrorexin PU 5855 is a waterborne polyurethane dispersion based on polycarbonate. This product has good chemical and abrasion resistance with good pigment wetting. It can be used in 1K or 2K topcoats. It is particularly recommended for plastic and RIM...veja mais Hydrorexin PU 5855 is a waterborne polyurethane dispersion based on polycarbonate. This product has good chemical and abrasion resistance with good pigment wetting. It can be used in 1K or 2K topcoats. It is particularly recommended for plastic and RIM applications. veja menos | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...veja mais IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. veja menos | |
| KONDICRYL SV 166 | Pidilite Industries Ltd. - Resins Division | O KONDICRYL SV 166 oferece uma película brilhosa e flexível que possui boa resistência à gasolina. A sua ampla compatibilidade com outros veículos de revestimento tais como a nitrocelulose, celulose acetato butirato e vinis. O KONDICRYL SV 166 pode ser us...veja mais O KONDICRYL SV 166 oferece uma película brilhosa e flexível que possui boa resistência à gasolina. A sua ampla compatibilidade com outros veículos de revestimento tais como a nitrocelulose, celulose acetato butirato e vinis. O KONDICRYL SV 166 pode ser usado como aglutinante para revestimentos de propósito geral pata metais e plásticos, revestimentos de alvenaria de alto desempenho e tintas e pinturas de re-acabamento automotivo. veja menos | |
| OTL-B-5 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...veja mais OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-BE-50 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...veja mais OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-BE-51 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...veja mais OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-G-49 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...veja mais OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-R-52 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...veja mais OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-R-57 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...veja mais OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-W-58 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...veja mais OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-Y-53 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...veja mais OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-Y-54 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...veja mais OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-Y-55 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...veja mais OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| Picassian® AC-191 | Stahl Polymers | Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...veja mais Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. veja menos | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...veja mais Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. veja menos | |
| Polurene MT 100 | S.A.P.I.C.I. SpA | Polurene MT 100 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 100 LLV | S.A.P.I.C.I. SpA | Polurene MT 100 LLV is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 75 | S.A.P.I.C.I. SpA | Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints a...veja mais Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints and enamels for metal, wood and plastics. This product contains less than .2% HDI isocyanates. veja menos | |
| Polurene MT 90 | S.A.P.I.C.I. SpA | Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanat...veja mais Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. veja menos | |
| Polurene MT 90 AB | S.A.P.I.C.I. SpA | Polurene MT 90 AB is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low-viscosity 2K paints and enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Relca® PU-968 | Stahl Polymers | Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion p...veja mais Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion properties, and is crosslinkable at room temperature with polycarbodiimides. veja menos | |
| Rexin DP 412 | S.A.P.I.C.I. SpA | Rexin DP 412 is a slightly branched solventless saturated polyester resin. This product has high chemical resistance and good elasticity. It can be used in coatings and enamels for metal, plastic, wood and rubber. | |
| Rexin DP 417 | S.A.P.I.C.I. SpA | Rexin DP 417 is a solventless saturated polyester resin. This product has good elasticity. It can be used in enamels and coatings for paper, leather, plastic and rubber. It is particularly used for the formation of soft-touch effect coatings. | |
| Rexin DP 430 | S.A.P.I.C.I. SpA | Rexin DP 430 is a solventless saturated polyester resin. This product has good elasticity. It can be used in coatings and enamels for leather, plastic, rubber and paper coatings. It is used to formulate soft-touch effect coatings. | |
| Sarbox SB401 | Sartomer Americas | O Sarbox SB401 é altamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, misturados com solvente propinato etil-3-etoxi (EEP). Ele oferece uma rápida velocidade de cura e e excelente aderência ao cobre. Tem um alto número de ácido par...veja mais O Sarbox SB401 é altamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, misturados com solvente propinato etil-3-etoxi (EEP). Ele oferece uma rápida velocidade de cura e e excelente aderência ao cobre. Tem um alto número de ácido para retirada alcalina. O Sarbox SB401 também oferece boa resistência a solventes e ácidos e excelente desenvolvimento de brilho aquoso. As aplicações sugeridas deste produto incluem revestimentos de metal, plástico e madeira, tintas e máscaras de solda e fotoresistores para eletrônicos. veja menos | |
| Sarbox SB405 | Sartomer Americas | O Sarbox SB405 é um líquido claro altamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, misturados com solvente de acetato PM. Este produto oferece boas condições de aderência e de cura dupla com uma resposta de cura rápida. Ele tam...veja mais O Sarbox SB405 é um líquido claro altamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, misturados com solvente de acetato PM. Este produto oferece boas condições de aderência e de cura dupla com uma resposta de cura rápida. Ele também possui alta flexibilidade, baixa retratibilidade e boa resistência ao calor, água e a produtos químicos. O Sarbox SB405 é sugerido para cauterizar, resistores de placa, e máscaras de solda para eletrônicos e aplicações de revestimentos para madeiras e plásticos. veja menos | |
| Sarbox SB510E35 | Sartomer Americas | O Sarbox SB510E35 é moderadamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, monômero triacrilato trimetilolpropano etoxilatado. Ele oferece excelente cura velocidade, excelente aderência em metal e plástico, boas características ...veja mais O Sarbox SB510E35 é moderadamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, monômero triacrilato trimetilolpropano etoxilatado. Ele oferece excelente cura velocidade, excelente aderência em metal e plástico, boas características umectantes e de fluxo. O Sarbox SB510E35 também possui excelente aderência de película fina ao aço electrocoberto. As aplicações sugeridas deste produto incluem adesivos, plastisóis, tintas de tela, flexogáficas e de gravura e revestimentos de papel, plástico, metal e madeira. veja menos | |
| Sarbox SB520E35 | Sartomer Americas | O Sarbox SB520E35 é moderadamente funcional, ácido carboxílico contendo manômero diacrilato glicol tripopileno oligômero acrilato. Os sólidos reagentes deste produto são 100%. O Sarbox SB520E35 oferece um dos mais rápidos índices de cura da linha de produ...veja mais O Sarbox SB520E35 é moderadamente funcional, ácido carboxílico contendo manômero diacrilato glicol tripopileno oligômero acrilato. Os sólidos reagentes deste produto são 100%. O Sarbox SB520E35 oferece um dos mais rápidos índices de cura da linha de produtos Sarbox, excelente aderência em metais e plásticos, e boas características umectantes e de fluxo. Ele também oferece alta resistência a impactos e flexibilidade, bem como uma boa resistência química, à água e ao calor. Outras aplicações sugeridas para este produto incluem aplicações de tinta, revestimentos de madeira e papel, revestimentos fotorresistentes e máscaras de solda eletrônica. veja menos | |
| Sarbox SB520M35 | Sartomer Americas | O Sarbox SB520M35 é moderadamente funcional, ácido carboxílico contendo manômero diacrilato glicol tripopileno oligômero acrilato. O Sarbox SB520M35 oferece um dos mais rápidos índices de cura da linha de produtos Sarbox, excelente aderência em metais e p...veja mais O Sarbox SB520M35 é moderadamente funcional, ácido carboxílico contendo manômero diacrilato glicol tripopileno oligômero acrilato. O Sarbox SB520M35 oferece um dos mais rápidos índices de cura da linha de produtos Sarbox, excelente aderência em metais e plásticos, e boas características umectantes e de fluxo. Ele também oferece alta resistência a impactos e flexibilidade, bem como uma boa resistência química, à água e ao calor. Outras aplicações sugeridas para este produto incluem aplicações de tinta de tela, flexográficas, e de gravura, revestimentos de madeira e papel, revestimentos fotorresistentes e máscaras de solda eletrônica. veja menos | |
| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, a...veja mais SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, and 2-pack coatings. veja menos | Request Sample |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...veja mais SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. veja menos | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...veja mais SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. veja menos | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...veja mais SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. veja menos | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...veja mais SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. veja menos | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...veja mais STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. veja menos | |
| STANLUX® Silver 2210 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an a...veja mais STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an average particle size of 60 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver 2240 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an a...veja mais STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...veja mais STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. veja menos | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...veja mais STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. veja menos | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...veja mais STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. veja menos | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...veja mais STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. veja menos | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...veja mais STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. veja menos | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...veja mais STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. veja menos | |
| STANLUX® Silver 3871 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an aver...veja mais STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver 3891 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property....veja mais STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property. STANLUX® Silver 3891 has an average particle size of 11 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R2970 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Sil...veja mais STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Silver R2970 has an average particle size of 32 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R3270 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an av...veja mais STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an average particle size of 25 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R3370 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an ave...veja mais STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an ave...veja mais STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R3670 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an ave...veja mais STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R3770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 ha...veja mais STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R3870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has ...veja mais STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R4100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...veja mais STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4100 has an average particle size of 64 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R4112 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...veja mais STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4112 has an average particle size of 45 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R4114 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metal...veja mais STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4114 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R4200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...veja mais STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4200 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® SIlver R4500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...veja mais STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4500 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R4700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...veja mais STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4700 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R4800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...veja mais STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4800 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R4850 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metalli...veja mais STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4850 has an average particle size of 15 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R6200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an...veja mais STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R6300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6300 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver...veja mais STANLUX® Silver R6300 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6300 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver R6400 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6400 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It has a differentiated metallic effect in whiteness and brilliance and is recommended for...veja mais STANLUX® Silver R6400 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It has a differentiated metallic effect in whiteness and brilliance and is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6400 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver SD7100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7100 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...veja mais STANLUX® Silver SD7100 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7100 has an average particle size of 34 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver SD7200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7200 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...veja mais STANLUX® Silver SD7200 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7200 has an average particle size of 33 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver SD7300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7300 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...veja mais STANLUX® Silver SD7300 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7300 has an average particle size of 30 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver SD7450 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7450 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that req...veja mais STANLUX® Silver SD7450 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7450 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver SD7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7500 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that req...veja mais STANLUX® Silver SD7500 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7500 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® Silver SD7700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7700 is a non-leafing type aluminium pigment with medium-fine, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance sys...veja mais STANLUX® Silver SD7700 is a non-leafing type aluminium pigment with medium-fine, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7700 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. veja menos | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...veja mais STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. veja menos | |
| TKA-66 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-66 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good gloss hardness and pigment dispersion while providing good chemical and weather resistance. It is commonly used in a variety of appli...veja mais TKA-66 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good gloss hardness and pigment dispersion while providing good chemical and weather resistance. It is commonly used in a variety of applications including inks, plastic paints, and container paints. veja menos | |
| UCECOAT® 6570 | Allnex | UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance ...veja mais UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance after curing by ultraviolet light (UV) or electron beam (EB). veja menos | Request Sample |
| Ucopol M 4054 | S.A.P.I.C.I. SpA | Ucopol M 4054 is a moisture-curing prepolymer. This product dries quickly with good surface hardness, abrasion resistance and good brightness. It can be used in parquet or plastic coatings. This product contains less than .5% TDI isocyanates. | |
| Ucopol M 505 | S.A.P.I.C.I. SpA | Ucopol M 505 is a moisture-curing prepolymer. This product has good flexibility and weather resistance. It can be used in coatings for wood, plastics, concrete, rubber, textile fabrics, and leather. This product contains less than .5% TDI isocyanates. | |
| Ucopol W 708 | S.A.P.I.C.I. SpA | Ucopol W 708 is a moisture-curing prepolymer. This product has good chemical, weather, and yellowing resistance. It can be used in wood, plastic and concrete coatings. This product has less than .5% HDI isocyanates. | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | O WorléeCryl® 7135 é uma emulsão de copolímero acrílico de estireno. Ele é utilizado para acabamentos superiores em metal, madeira e plásticos (PS, ABS). Este produto se destina também a primers anticorrosivos temporários sobre metal, e pode ser combinado...veja mais O WorléeCryl® 7135 é uma emulsão de copolímero acrílico de estireno. Ele é utilizado para acabamentos superiores em metal, madeira e plásticos (PS, ABS). Este produto se destina também a primers anticorrosivos temporários sobre metal, e pode ser combinado com resinas alquídicas diluíveis em água. Este grau é fornecido sob a forma de 42% em água. veja menos | |
| WorléeCryl® A 1220 | Worlée-Chemie G.m.b.H. | O WorléeCryl® A 1220 é uma resina acrílica que pode sofrer ligação cruzada (reticulada) com poliisocianatos. O W'Cryl A 1220 é um copolímero acrílico para a fabricação de revestimentos plásticos de alta qualidade. Devido às boas propriedades de adesão, es...veja mais O WorléeCryl® A 1220 é uma resina acrílica que pode sofrer ligação cruzada (reticulada) com poliisocianatos. O W'Cryl A 1220 é um copolímero acrílico para a fabricação de revestimentos plásticos de alta qualidade. Devido às boas propriedades de adesão, este produto também é adequado para tintas sobre material composto, como, por exemplo, caravanas, e até mesmo sobre metal. veja menos | |
| WorléeCryl® A 2141 | Worlée-Chemie G.m.b.H. | O WorléeCryl® A 2141 é uma resina acrílica que pode sofrer ligação cruzada (ser reticulada) com poliisocianatos para a produção de tintas industriais de alta qualidade. Estes vernizes de dois componentes são sistemas com alto teor de sólidos. Mesmo quando...veja mais O WorléeCryl® A 2141 é uma resina acrílica que pode sofrer ligação cruzada (ser reticulada) com poliisocianatos para a produção de tintas industriais de alta qualidade. Estes vernizes de dois componentes são sistemas com alto teor de sólidos. Mesmo quando secadas à temperatura ambiente, os revestimentos apresentam excelente brilho, rigidez e resistência a intempéries e a produtos químicos. Os campos de aplicação para o W'Cryl A 2141 são tintas com alto teor de sólidos para elementos de fachada, caravanas e plásticos. veja menos | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | O WorléeCryl® A 2218 é uma resina acrílica de estireno que pode sofrer ligação cruzada (ser reticulada) com poliisocianatos. Ele é o preferido para a formulação de primers de secagem muito rápida e revestimentos superiores para aço e plásticos. Este grau ...veja mais O WorléeCryl® A 2218 é uma resina acrílica de estireno que pode sofrer ligação cruzada (ser reticulada) com poliisocianatos. Ele é o preferido para a formulação de primers de secagem muito rápida e revestimentos superiores para aço e plásticos. Este grau apresenta um teor não-volátil de 50% ± 1. veja menos | |
| WorléeThix A 1420 | Worlée-Chemie G.m.b.H. | WorléeThix A 1420 é um acrilato puro tixotrópico hidroxifuncional para a fabricação de revestimentos de acabamento de dois componentes. Esta categoria apresenta um teor não volátil de 50% ± 2. W´Thix A 1420 pode ser combinado para revestimentos de madeir...veja mais WorléeThix A 1420 é um acrilato puro tixotrópico hidroxifuncional para a fabricação de revestimentos de acabamento de dois componentes. Esta categoria apresenta um teor não volátil de 50% ± 2. W´Thix A 1420 pode ser combinado para revestimentos de madeira e plástico para secagem a ar e forçada em dois pacotes. Após a cura, o revestimento apresenta dureza e resistência química e climática. Os campos de aplicação para W´Thix A 1420 são sistemas de revestimento de madeira pigmentados e incolores. Nessas formulações de revestimentos, W´Thix A 1420 é usado para ajustar a estabilidade nas superfícies verticais. veja menos | |
| WorléeThix A 2125 | Worlée-Chemie G.m.b.H. | WorléeThix A 2125 é uma resina acrílica tixotrópica reticulável com isocianato. Esta categoria apresenta um teor não volátil de 50% ± 2. W´Thix A 2125 pode ser reticulada com poliisocianatos alifáticos e aromáticos para formular sistemas de secagem a ar e...veja mais WorléeThix A 2125 é uma resina acrílica tixotrópica reticulável com isocianato. Esta categoria apresenta um teor não volátil de 50% ± 2. W´Thix A 2125 pode ser reticulada com poliisocianatos alifáticos e aromáticos para formular sistemas de secagem a ar e forçada para metal, madeira e plásticos. O sistema alifático apresenta excelente dureza, boa resistência química e boa durabilidade externa já em temperatura ambiente. W´Thix A 2125 é apropriada para muitas aplicações industriais como equipamentos agrários, caminhões de construção e revestimentos plásticos. Este produto também é usado para formular revestimentos de efeito decorativo. veja menos | |
| WorléeThix A 2313 | Worlée-Chemie G.m.b.H. | WorléeThix A 2313 é uma resina acrílica tixotrópica que pode ser reticulada com isocianatos. Esta categoria apresenta um teor não volátil de 60 % ± 2. W´Thix A 2313 pode ser utilizada como aglutinante isolado ou em combinação com outros hidróxi acrilatos ...veja mais WorléeThix A 2313 é uma resina acrílica tixotrópica que pode ser reticulada com isocianatos. Esta categoria apresenta um teor não volátil de 60 % ± 2. W´Thix A 2313 pode ser utilizada como aglutinante isolado ou em combinação com outros hidróxi acrilatos para a fabricação de tintas industriais de secagem a ar ou forçada. Os filmes de tinta mostram alta dureza, resistência química e muito boa resistência climática mesmo em temperatura ambiente. Os campos de aplicação para a W´Thix A 2313 são revestimentos de elementos dianteiros e de plástico. W´Thix A 2313 pode ser usada também para formular acabamentos de efeito decorativo. veja menos | |
| XHG-9169 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless ...veja mais XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless adhesion, it can be applied to most non-porous siliceous material such as glass, tiles, ceramics, enamel and glazed tiles as well as impregnated, varnished or painted wood and some plastics. veja menos | |
| XHG-9179 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. A...veja mais XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As an adhesion, it can be applied to glass such as windows, glazed surfaces, ceramic tiles, and many plastics and paints. veja menos |
