4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...veja mais 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. veja menos | Request Sample |
Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...veja mais Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. veja menos | |
ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
ADDITOL® VXW 4934 | Allnex | Additol® VXW 4934 é um aditivo para tintas hidrossolúveis usado para a prevenção de sedimentação do pigmento, para o melhoramento do enfraquecimento nas bordas durante a aplicação a imersão e para melhorar o limite de “sagging” durante a aplicação com spr...veja mais Additol® VXW 4934 é um aditivo para tintas hidrossolúveis usado para a prevenção de sedimentação do pigmento, para o melhoramento do enfraquecimento nas bordas durante a aplicação a imersão e para melhorar o limite de “sagging” durante a aplicação com spray. veja menos | Request Sample |
ADDITOL® VXW 6360 | Allnex | Additol® VXW 6360 é um espessante poliuretano para tintas base água com secagem ao ar. Possui excelentes propriedades reológicas que melhoram o fluxo, o nivelamento, a formação do film e melhora a aplicação com pincel. | Request Sample |
ADDITOL® VXW 6388 | Allnex | Engrossante de poliuretano para sistemas de revestimentos aquosos, de secagem à ar. | Request Sample |
ADDITOL® XL 280 | Allnex | Pasta líquida anti-sedimentação com propriedades umectantes para pigmentos, com base em uma argila de montmorillonita especialmente modificada. | Request Sample |
ADDITOL® XL 6557 | Allnex | O Additol® XL 6557 é um meio de moagem polimérico reticulável. Proporciona umedecimento de pigmentos, baixa viscosidade nas massas e boa estabilização dos pigmentos nas massas. Os revestimentos acabados tingidos com este produto têm uma alta dureza, uma r...veja mais O Additol® XL 6557 é um meio de moagem polimérico reticulável. Proporciona umedecimento de pigmentos, baixa viscosidade nas massas e boa estabilização dos pigmentos nas massas. Os revestimentos acabados tingidos com este produto têm uma alta dureza, uma resistência ao amarelecimento, alto brilho, boas propriedades de secagem e boa resistência à água/ intempéries. É recomendado para aplicações industriais a base de solventes, tais como revestimento de bobinas, tintas anti-corrosivas marítimas e de trabalho pesado, agricultura, madeira industrial e demais revestimentos metálicos. veja menos | Request Sample |
AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 é uma dispersão de AEROSIL® hidrofóbico, especial, estruturada, altamente preenchida. Torna possível, facilmente e eficazmente, melhorar o engrossamento e a tixotropia e as propriedades anti-sedimentação, estabilização do pigmento bem co...veja mais AERODISP® WR 8520 é uma dispersão de AEROSIL® hidrofóbico, especial, estruturada, altamente preenchida. Torna possível, facilmente e eficazmente, melhorar o engrossamento e a tixotropia e as propriedades anti-sedimentação, estabilização do pigmento bem como propriedades mecânicas, em revestimentos pigmentados aquosos e revestimentos transparentes à base de água. veja menos | Request Sample |
AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica hidrofílica com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, alimentos e cosméticos, compostos para cabo e géis, borracha de silicone e na proteção d...veja mais Uma sílica pirogênica hidrofílica com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, alimentos e cosméticos, compostos para cabo e géis, borracha de silicone e na proteção de planta. veja menos | Request Sample |
AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica hidrofílica com uma área de superfície específica de 300 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, compostos para cabos e em borracha de silicone. | Request Sample |
AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica hidrofílica com uma área de superfície específica de 380 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, compostos para cabos e borracha de silicone. | Request Sample |
AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...veja mais AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. veja menos | Request Sample |
AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | Um sílica pirogênica pós-tratada com um polidimetilsiloxano. | Request Sample |
AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...veja mais AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. veja menos | Request Sample |
AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica pós-tratada com um octil silano baseado em AEROSIL® 200. É utilizada em tintas e revestimentos, adesivos e seladores e sistemas multi-camadas de epóxi. | Request Sample |
AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | Um sílica pirogênica pós-tratada com HMDS baseado em AEROSIL® 300. É utilizada em tintas e revestimentos, borracha de silicone e adesivos e seladores. | Request Sample |
AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica pós-tratada com um hexadecil silano baseado em AEROSIL® 200. É utilizado em sistemas de revestimentos à base de água. | Request Sample |
AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 é um sílica pirogênica pós-tratada com DDS (dimetildiclorossilano). É utilizada em borracha e seladores de silicone, tintas e revestimentos, tintas de impressão, tôners, adesivos, compostos para cabos e géis, proteção de planta. | Request Sample |
AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 é um sílica pirogênica hidrofóbica pós-tratada com o DDS (dimetildiclorossilano), baseada em uma sílica pirogênica hidrofílica, com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, borracha e seladores d...veja mais AEROSIL® R 974 é um sílica pirogênica hidrofóbica pós-tratada com o DDS (dimetildiclorossilano), baseada em uma sílica pirogênica hidrofílica, com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, borracha e seladores de silicone, tôner negativo, adesivos, polímeros de revestimento. veja menos | Request Sample |
AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...veja mais AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. veja menos | Request Sample |
AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...veja mais AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. veja menos | |
AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...veja mais AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. veja menos | |
AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...veja mais AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. veja menos | |
BENTONE® 34 | Elementis | BENTONE® 34 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
BENTONE® 38 | Elementis | BENTONE® 38 rheological additive is a modified hectorite organoclay. This rheology modifier is advised for medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...veja mais BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. veja menos | |
BENTONE® EW | Elementis | BENTONE® EW rheological additive is a refined and benificiated hectorite clay based thickener for waterborne paint and aqueous coating systems. This rheology modifier has outstanding sag and suspension control and can be incorporated in the pre-gel. | |
BENTONE SD®-1 | Elementis | BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the pai...veja mais BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the paint manufacturing process and can be used for post-correction. veja menos | |
BENTONE SD®-2 | Elementis | BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents...veja mais BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. veja menos | |
BK-127 | LUKEM D.O.O. | BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...veja mais BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. veja menos | |
BK-883 | LUKEM D.O.O. | BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...veja mais BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. veja menos | |
BK–884A | LUKEM D.O.O. | BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives...veja mais BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives, varnishes, inks, nitro lacquer, and sealants. veja menos | |
BK-923 | LUKEM D.O.O. | BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is ...veja mais BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is also used in inks, adhesives, putties, sealants, varnishes, and nitro lacquer. veja menos | |
CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...veja mais CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. veja menos | |
CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...veja mais CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. veja menos | |
CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...veja mais CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. veja menos | |
CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...veja mais CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. veja menos | |
CLAYTONE® 40 | BYK | O Claytone® 40 é um derivado da bentonita organofílica, que é utilizada como agente espessante tixotrópico e agente anti-decantação em sistemas de revestimentos baseados em solventes de baixa a média polaridade. É uma argila organofílica tradicional que e...veja mais O Claytone® 40 é um derivado da bentonita organofílica, que é utilizada como agente espessante tixotrópico e agente anti-decantação em sistemas de revestimentos baseados em solventes de baixa a média polaridade. É uma argila organofílica tradicional que exige a adição de um ativador para alcançar a eficiência completa. Como produto esmectita organofílico, ele pode inchar em meios orgânicos e construir uma estrutura de gel (estrutura da de casa cartão). As ligações de hidrogênio fracas entre as plaquetas individuais de esmectite são a razão para esta estrutura de gel tixotrópico. Para uma ótima eficiência é necessária a separação completa das plaquetas (dispersão completa dos aglomerados em partículas primárias). veja menos | |
CLAYTONE® AF | BYK | O Claytone® AF é uma montmorilonita modificada projetada para uso em sistemas contendo solventes alifáticos e misturas de solventes alifático-aromáticos que exibem baixa a média polaridade. O Claytone® AF produz viscosidade reprodutível e desenvolvimento ...veja mais O Claytone® AF é uma montmorilonita modificada projetada para uso em sistemas contendo solventes alifáticos e misturas de solventes alifático-aromáticos que exibem baixa a média polaridade. O Claytone® AF produz viscosidade reprodutível e desenvolvimento tixotrópico, um alto grau de controle de decaimento e impede a decantação do pigmento. O Claytone® AF é auto-dispersante e não requer um ativador polar. O Claytone® AF elimina a necessidade de cisalhamento elevado ou pré-géis. veja menos | |
CLAYTONE® APA | BYK | O Claytone® APA é uma montmorilonita modificada projetada para uso em sistemas contendo solvente aromático ou misturas de solventes aromático-oxigenados que apresentam média a alta polaridade. O Claytone® APA demonstra alta eficiência de gelificação, visc...veja mais O Claytone® APA é uma montmorilonita modificada projetada para uso em sistemas contendo solvente aromático ou misturas de solventes aromático-oxigenados que apresentam média a alta polaridade. O Claytone® APA demonstra alta eficiência de gelificação, viscosidade reprodutível e desenvolvimento tixotrópico, um elevado grau de controle de descaimento e evita a decantação rígida de pigmentos e enchimentos. veja menos | |
CLAYTONE® HY | BYK | O Claytone® HY é uma montmorilonita modificada projetada para uso em tintas de impressão de polaridade baixa a média. O Claytone® HY demonstra alta eficiência de gelificação, aumenta a viscosidade e o valor de rendimento, evita a aglomeração e decantação ...veja mais O Claytone® HY é uma montmorilonita modificada projetada para uso em tintas de impressão de polaridade baixa a média. O Claytone® HY demonstra alta eficiência de gelificação, aumenta a viscosidade e o valor de rendimento, evita a aglomeração e decantação do pigmento, reduz a formação de névoa e permite que o fabricante de tinta controle a viscosidade da aderência. veja menos | |
CLAYTONE-40 | BYK | O TIXOGEL® VP é um agente tixotrópico e anti-decantação para sistemas de baixa a média polaridade. Para alcançar a máxima eficiência, o TIXOGEL VP® deve ser disperso usando altas forças de cisalhamento. | |
CLAYTONE-EM | BYK | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
CLAYTONE-ER | BYK | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
CLAYTONE-IMG 400 | BYK | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
CLAYTONE-MPZ | BYK | O TIXOGEL® MPZ é um produto da série organofílica Maximum Performance. É um espessante tixotrópico altamente eficiente e agente anti-decantação, que é usado em sistemas de média a alta polaridade. Via de regra, a adição de um ativador não é necessária em ...veja mais O TIXOGEL® MPZ é um produto da série organofílica Maximum Performance. É um espessante tixotrópico altamente eficiente e agente anti-decantação, que é usado em sistemas de média a alta polaridade. Via de regra, a adição de um ativador não é necessária em sistemas altamente polares, mas é benéfico em sistemas com polaridade média. veja menos | |
CLAYTONE-SF | BYK | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
CLAYTONE®-VZ | BYK | O TIXOGEL® VZ é um agente tixotrópico e anti-decantação para sistemas polares. Para a máxima eficiência, o TIXOGEL® VZ deve ser incorporado sob cisalhamento alto. De preferência, o TIXOGEL® VZ deve ser adicionado à base da pulverização. Ele não tem grau p...veja mais O TIXOGEL® VZ é um agente tixotrópico e anti-decantação para sistemas polares. Para a máxima eficiência, o TIXOGEL® VZ deve ser incorporado sob cisalhamento alto. De preferência, o TIXOGEL® VZ deve ser adicionado à base da pulverização. Ele não tem grau pré-ativado e devem ser usados ativadores para proporcionar um desempenho ótimo. veja menos | |
DA-40A | Antex Chemicals (Zhongshan) Limited | DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
DA-40N | Antex Chemicals (Zhongshan) Limited | DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...veja mais Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. veja menos | |
Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...veja mais Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. veja menos | |
DISPERBYK®-2013 | BYK | O DISPERBYK®-2013 é um umectante sem solventes e aditivo dispersante para sistemas 100% UV e sistemas UV à base de solventes e à base de água para tintas de impressão e revestimentos. Com base na sua polaridade de produto equilibrada e forma de administra...veja mais O DISPERBYK®-2013 é um umectante sem solventes e aditivo dispersante para sistemas 100% UV e sistemas UV à base de solventes e à base de água para tintas de impressão e revestimentos. Com base na sua polaridade de produto equilibrada e forma de administração 100%, o DISPERBYK-2013 alcança uma excelente estabilização, em particular em sistemas 100% UV e especialmente de pigmentos orgânicos e pigmentos negro de fumo. Ao fazê-lo, o produto tem um efeito de redução da viscosidade impressionante e eficaz, reduzindo simultaneamente o comportamento do fluxo tixotrópico. veja menos | |
EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) | Eastman Chemical B.V. | A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will...veja mais A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder. veja menos | |
EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-553-0.4) | Eastman Chemical B.V. | Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is rea...veja mais Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is reactive and may be crosslinked with ureaformaldehydes, melamines, and polyisocyantes. Films of CAB-553-0.4 are colorless and have good ultraviolet stability, maintaining their low color over long periods of time. veja menos | |
EASTMAN CELLULOSE ACETATE (CA-398-3) | Eastman Chemical B.V. | One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solv...veja mais One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solvents, plasticizers, and other modifying resins to formulate coatings for paper, glass, plastic, wire screen, and electrical wiring. veja menos | |
EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-482-0.5) | Eastman Chemical B.V. | A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed ...veja mais A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed from Eastman CAP-482-0.5 have fast solvent release, excellent antiblocking properties, and grease resistance superior to that of other film-formers. veja menos | |
EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | Eastman Chemical B.V. | A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV li...veja mais A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. veja menos | |
Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...veja mais Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. veja menos | |
Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...veja mais Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. veja menos | |
Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...veja mais Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. veja menos | |
Hakuenka® CCR-S10 | Shiraishi-Omya GmbH | Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...veja mais Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. veja menos | |
HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...veja mais HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. veja menos | |
HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...veja mais HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. veja menos | |
HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...veja mais HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. veja menos | |
HDK® H20 | Wacker Chemie AG | HDK® H20 é uma sílica sintética, hidrofóbica, amorfa, produzida através de hidrólise da chama. É usado como um enchimento de reforço em elastômeros, principalmente elastômeros de silicone. HDK® H20 atua como um aditivo de fluxo livre na produção de revest...veja mais HDK® H20 é uma sílica sintética, hidrofóbica, amorfa, produzida através de hidrólise da chama. É usado como um enchimento de reforço em elastômeros, principalmente elastômeros de silicone. HDK® H20 atua como um aditivo de fluxo livre na produção de revestimentos em pó. Pode ser aplicado em adesivos, revestimentos, tintas de impressão, produtos para cuidados da pele, cosméticos decorativos e muito mais. veja menos | |
HDK® T30 | Wacker Chemie AG | O HDK® T30 é uma sílica sintética, hidrofóbica e amorfa, produzida por hidrólise da chama, e que é um pó coloidal branco de alta pureza. É aplicado como um agente espessante e tixotrópico em muitos sistemas orgânicos como, por exemplo, poliésteres insatur...veja mais O HDK® T30 é uma sílica sintética, hidrofóbica e amorfa, produzida por hidrólise da chama, e que é um pó coloidal branco de alta pureza. É aplicado como um agente espessante e tixotrópico em muitos sistemas orgânicos como, por exemplo, poliésteres insaturados, revestimentos, tintas de impressão, adesivos e outros. O HDK® T30 é usado como um enchimento de reforço em elastômeros, principalmente elastômeros de silicone. veja menos | |
HDK® T40 | Wacker Chemie AG | O HDK® T40 é um pó branco coloidal de alta pureza e é uma sílica sintética, amorfa e hidrófila produzida por hidrólise da chama. Ele é utilizado como um aditivo de fluxo livre na produção de substâncias em pó e produtos de alimentação. O HDK® T40 é aplica...veja mais O HDK® T40 é um pó branco coloidal de alta pureza e é uma sílica sintética, amorfa e hidrófila produzida por hidrólise da chama. Ele é utilizado como um aditivo de fluxo livre na produção de substâncias em pó e produtos de alimentação. O HDK® T40 é aplicado como um agente espessante e tixotrópico em muitos sistemas orgânicos como, por exemplo, poliésteres insaturados, revestimentos, tintas de impressão, adesivos e outros. veja menos | |
HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...veja mais HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. veja menos | |
HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...veja mais HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. veja menos | |
HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...veja mais HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. veja menos | |
HS971 | Tianyi Chemical Engineering Material Co., Ltd. | HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...veja mais HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. veja menos | |
HS973 | Tianyi Chemical Engineering Material Co., Ltd. | HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...veja mais HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. veja menos | |
HS975 | Tianyi Chemical Engineering Material Co., Ltd. | HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...veja mais HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. veja menos | |
Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
Indunal S 2230 HPL | Indulor Chemie GmbH | Indunal S 2230 HPL is a water based resin technology for high performance pigment dispersions, solubilised with ammonia. It has excellent transfer and gloss, high color strength at lower pigment dosage, and high pigment to binder ratio with low viscosity....veja mais Indunal S 2230 HPL is a water based resin technology for high performance pigment dispersions, solubilised with ammonia. It has excellent transfer and gloss, high color strength at lower pigment dosage, and high pigment to binder ratio with low viscosity. Indunal S 2230 HPL is used in printing inks and overprint varnishes. veja menos | |
Indunal T 122 | Indulor Chemie GmbH | Indunal T 122 is an emulsion polymer based on acrylates that is carboxylated and APEO-free. It is a thickener and can be combined with Induprint PAC 504 for the production of low-cost printing inks. Indunal T 122 is used in paints, plasters, water-based p...veja mais Indunal T 122 is an emulsion polymer based on acrylates that is carboxylated and APEO-free. It is a thickener and can be combined with Induprint PAC 504 for the production of low-cost printing inks. Indunal T 122 is used in paints, plasters, water-based printing inks, overprint varnishes, wood lacquers, base coatings on fiberboard, adhesives, paper coatings, and other water-based systems. veja menos | |
Indunal T 1420 | Indulor Chemie GmbH | Indunal T 1420 is a terpolymeric carboxylated acrylic emulsion. It is a thickener and has excellent resolubility, very good transfer, and very high hydrosol viscosity. Indunal T 1420 is used in emulsion paints, water-based printing inks, plasters, and ove...veja mais Indunal T 1420 is a terpolymeric carboxylated acrylic emulsion. It is a thickener and has excellent resolubility, very good transfer, and very high hydrosol viscosity. Indunal T 1420 is used in emulsion paints, water-based printing inks, plasters, and overprint varnishes. veja menos | |
Indunal T 147 | Indulor Chemie GmbH | Indunal T 147 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener and has excellent thixotropic thickening effect, excellent water retention value, and stabilizes pigments and fillers. Indunal T 147 is used in emulsion paints...veja mais Indunal T 147 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener and has excellent thixotropic thickening effect, excellent water retention value, and stabilizes pigments and fillers. Indunal T 147 is used in emulsion paints, plasters, wood lacquers and stains, adhesives, paper coatings, and textile coatings. veja menos | |
Indunal T 256 | Indulor Chemie GmbH | Indunal T 256 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener, rheology additive, and stabilizes pigments and fillers. Indunal T 256 is used in printing inks, emulsion paints and plasters, wood lacquers and stains, adhesi...veja mais Indunal T 256 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener, rheology additive, and stabilizes pigments and fillers. Indunal T 256 is used in printing inks, emulsion paints and plasters, wood lacquers and stains, adhesives, paper coatings, and textile coatings. veja menos | |
LAPONITE® RD | BYK | O Laponite® RD é um silicato sintéticos em camadas. É insolúvel em água, mas hidrata e incha para proporcionar dispersões coloidais transparentes e incolores. Em concentrações de 2% ou mais em água, podem ser produzidos géis altamente tixotrópicos. Este p...veja mais O Laponite® RD é um silicato sintéticos em camadas. É insolúvel em água, mas hidrata e incha para proporcionar dispersões coloidais transparentes e incolores. Em concentrações de 2% ou mais em água, podem ser produzidos géis altamente tixotrópicos. Este produto é utilizado para proporcionar uma estrutura sensível ao cisalhamento a uma ampla variedade de formulações à base de água. Estes incluem revestimentos de superfície domésticos e industriais, produtos de limpeza, esmaltes cerâmicos, agroquímicos, produtos para campos petrolíferos e hortícolas. veja menos | |
LAPONITE® RDS | BYK | O Laponite® RDS é um silicato sintético em camadas que incorpora um peptizador polifosfato inorgânico. Ele hidrata e incha em água para proporcionar dispersões coloidais transparentes e incolores de baixa viscosidade conhecidas como sóis. Em concentração ...veja mais O Laponite® RDS é um silicato sintético em camadas que incorpora um peptizador polifosfato inorgânico. Ele hidrata e incha em água para proporcionar dispersões coloidais transparentes e incolores de baixa viscosidade conhecidas como sóis. Em concentração de 10% em água, eles irão permanecer livres para fluir durante 24 horas. Com a adição de pequenas quantidades de eletrólito, são formados géis altamente tixotrópicos rapidamente. Este produto é utilizado para proporcionar uma estrutura sensível ao cisalhamento a uma ampla gama de formulações à base de água, incluindo revestimentos de superfície domésticos e industriais, produtos de limpeza, agroquímicos e produtos hortícolas. veja menos | |
LAPONITE® S482 | BYK | O Laponite® S482 é um silicato sintético em camadas modificado com um agente de dispersão patenteado. Ele hidrata e incha em água para proporcionar dispersões coloidais líquidas translúcidas e incolores conhecidas como sóis. Em 25% de concentração de sóli...veja mais O Laponite® S482 é um silicato sintético em camadas modificado com um agente de dispersão patenteado. Ele hidrata e incha em água para proporcionar dispersões coloidais líquidas translúcidas e incolores conhecidas como sóis. Em 25% de concentração de sólidos em água, eles permanecerão livres para fluir por até 1 ano. Pela adição de pequenas quantidades de eletrólito, ou pela adição às formulações que contenham, por exemplo, resinas, agentes tensioativos ou pigmentos, são formados géis altamente tixotrópicos rapidamente. Ele é utilizado para proporcionar uma estrutura sensível ao cisalhamento a uma ampla gama de formulações à base de água, incluindo revestimentos de superfície do tipo "faça você mesmo" e industriais, produtos de limpeza, cerâmicos e produtos agroquímicos. veja menos | |
LAPONITE® SL25 | BYK | O Laponite® SL25 é uma dispersão líquida pronta para uso de silicato sintético em camadas modificado com um agente de dispersão patenteado. Fornecido a 25% de teor de sólidos em água, o Laponite® SL25 é uma dispersão líquida de baixa viscosidade translúci...veja mais O Laponite® SL25 é uma dispersão líquida pronta para uso de silicato sintético em camadas modificado com um agente de dispersão patenteado. Fornecido a 25% de teor de sólidos em água, o Laponite® SL25 é uma dispersão líquida de baixa viscosidade translúcida e incolor. Pela adição às formulações que contenham, por exemplo, resinas, agentes tensioativos ou pigmentos, são formados géis altamente tixotrópicos rapidamente. Ele é utilizado para proporcionar uma estrutura sensível ao cisalhamento a uma ampla gama de formulações à base de água, incluindo revestimentos de superfície do tipo "faça você mesmo" e industriais, produtos de limpeza, cerâmicos e produtos agroquímicos. veja menos | |
Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...veja mais Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. veja menos | |
Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...veja mais Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. veja menos | |
Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...veja mais Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. veja menos | |
Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...veja mais Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. veja menos | |
Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...veja mais Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. veja menos | |
Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...veja mais Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. veja menos | |
Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...veja mais Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. veja menos |