| GENOMER* 4335 | Rahn AG | GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be...veja mais GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be used for automotive coatings, industrial coatings, and outdoor applications. veja menos | Request Sample |
| AFCONA - 4017 | AFCONA Additives Sdn Bhd | AFCONA – 4017 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, alkylbenzene, sec-butanol, and diisobutylketone solution. AFCONA – 4017 is a high molecular weight polymeric dispersant for co-grinding coil and can coatings, and ...veja mais AFCONA – 4017 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, alkylbenzene, sec-butanol, and diisobutylketone solution. AFCONA – 4017 is a high molecular weight polymeric dispersant for co-grinding coil and can coatings, and in baking polyesters, acrylics, epoxies, and polyurethanes. veja menos | |
| GENOMER* 4514 | Rahn AG | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...veja mais GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. veja menos | Request Sample |
| UNIQFOAM 170 S | UNIQCHEM (UK) CO., LTD. | UNIQFOAM 170 S is a solution of non-silicone defoaming polymers. This product is silicone-free and characterized by its quick de-aeration and defoaming effect and heat stability. It is used in unsaturated polyesters and 2K polyurethane coatings. | |
| Domopol 6052 80 BAc | HELIOS RESINS | Domopol 6052 80 BAc is a saturated polyester resin developed for 2K polyurethane coatings as a combination resin for hydroxyl acrylic resins to increase solids content, improve flexibility and outdoor durability in industrial finishes, protective coatings...veja mais Domopol 6052 80 BAc is a saturated polyester resin developed for 2K polyurethane coatings as a combination resin for hydroxyl acrylic resins to increase solids content, improve flexibility and outdoor durability in industrial finishes, protective coatings, and plastics coatings. veja menos | |
| Methylene Chloride | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Methylene Chloride is an organic compound with the formula CH2Cl2. It has multiple applications for use in the production of adhesives, polyurethane foam, solvents in safety film, reaction medium in pharmaceuticals, paint strippers and removers, metal cle...veja mais Methylene Chloride is an organic compound with the formula CH2Cl2. It has multiple applications for use in the production of adhesives, polyurethane foam, solvents in safety film, reaction medium in pharmaceuticals, paint strippers and removers, metal cleaning and degreasers. veja menos | |
| Rexin DP 390 | S.A.P.I.C.I. SpA | Rexin DP 390 is a saturated polyester resin. This product dries quickly with good flexibility, hardness, and a long pot life. It can be used in clear or pigmented matte and high gloss 2K polyurethane sealers and top coats. | |
| Oxymer™ HD56 | Perstorp | Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers...veja mais Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. veja menos | |
| ASCONIUM® 112 | ASCOTEC | ASCONIUM® 112 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on pure or modified alkyd, polyester, 1K or 2K polyurethane resins. | Request Sample |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurgreen AD AB-01 | S.A.P.I.C.I. SpA | Polurgreen AD AB-01 is a polyurethane adduct. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols and vinyl resins. It can be used in 2K varnishes, enamels, and coatings. It is composed of less than .1% ...veja mais Polurgreen AD AB-01 is a polyurethane adduct. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols and vinyl resins. It can be used in 2K varnishes, enamels, and coatings. It is composed of less than .1% TDI isocyanates and is based in a butyl-acetate solvent. veja menos | |
| Trixene BI 7950 | Baxenden Chemicals Ltd. | Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...veja mais Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7961 | Baxenden Chemicals Ltd. | Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fa...veja mais Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7963 | Baxenden Chemicals Ltd. | Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...veja mais Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7982 | Baxenden Chemicals Ltd. | Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...veja mais Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7991 | Baxenden Chemicals Ltd. | Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...veja mais Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7992 | Baxenden Chemicals Ltd. | Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...veja mais Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| VIALKYD® TO 608/60WS | Allnex | Vialkyd® TO 608/60WS is an oil-modified, air-drying polyurethane resin. It has rapid initial and through drying, along with good brushability. It also has high film hardness and abrasion resistance, and very good resistance to chemicals and water. It is u...veja mais Vialkyd® TO 608/60WS is an oil-modified, air-drying polyurethane resin. It has rapid initial and through drying, along with good brushability. It also has high film hardness and abrasion resistance, and very good resistance to chemicals and water. It is used as a single binder in wood, industrial and floor finishes, and combinations with other long oil alkyds for improved drying and resistance. veja menos | Request Sample |
| Polurene LP 1810 | S.A.P.I.C.I. SpA | Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...veja mais Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. veja menos | |
| DUROFTAL® FC 9511/80BAC | Allnex | DUROFTAL® FC 9511/80BAC is a fast curing hydroxy-functional polyester, modified with synthetic fatty acids, with approx. 4.5 % OH (on solid resin) that produces, in combination with aliphatic polyisocyanates, high quality ultra-high solids 2-pack polyurethane...veja mais DUROFTAL® FC 9511/80BAC is a fast curing hydroxy-functional polyester, modified with synthetic fatty acids, with approx. 4.5 % OH (on solid resin) that produces, in combination with aliphatic polyisocyanates, high quality ultra-high solids 2-pack polyurethane lacquers. veja menos | Request Sample |
| CN9002 | Sartomer Americas | CN9002 is a clear liquid difunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. This low viscosity oligomer offers low colour, flexibility, non-yellowing, and adhesion. It is particularly suitable for adhes...veja mais CN9002 is a clear liquid difunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. This low viscosity oligomer offers low colour, flexibility, non-yellowing, and adhesion. It is particularly suitable for adhesives, industrial coatings, and inks. veja menos | |
| Ithane 02 | Ichemco | Ithane 02 is an aromatic thermoplastic polyurethane in a dry granule form. This product has a Brookfield viscosity at 25°C of 460-680 cPs. Ithane 02 is most commonly used in shoe adhesive applications. | |
| EBECRYL® 4690 | Allnex | EBECRYL® 4690 is an energy-curable, Tin-free, urethane acrylate with ~27% bio-carbon offering and an excellent outdoor durability for clear and pigmented coats. This solvent-free product presents a high reactivity for an effective productivity and brings ...veja mais EBECRYL® 4690 is an energy-curable, Tin-free, urethane acrylate with ~27% bio-carbon offering and an excellent outdoor durability for clear and pigmented coats. This solvent-free product presents a high reactivity for an effective productivity and brings high hardness after cure with excellent substrate protection. veja menos | Request Sample |
| Tolonate™ HDB 75 B | Vencorex | Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd urethanes and polyurethane...veja mais Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for weatherable protective coatings for industrial maintenance and auto refinish applications. veja menos | |
| DOUBLEMER® 527 | DBC Europe GmbH | DOUBLEMER® 527 is a hexa-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). It is used as a matting coating with anti-staining property especially for mar...veja mais DOUBLEMER® 527 is a hexa-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). It is used as a matting coating with anti-staining property especially for marker pen. veja menos | |
| DOUBLEMER® 528 | DBC Europe GmbH | DOUBLEMER® 528 is a hexa-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). It is used as a clear coating with anti-staining property especially for marke...veja mais DOUBLEMER® 528 is a hexa-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). It is used as a clear coating with anti-staining property especially for marker pen. veja menos | |
| BYK®-1710 | BYK | O BYK®-1710 é uma mistura de polímeros destruidores de espuma e sólidos hidrofóbicos Este produto tem excelentes propriedades antiespumantes, especialmente em tintas de emulsão alquídica e revestimentos híbridos, de PU e EP. | |
| Unithane MP-270 | Union Specialties, Inc. | Unithane MP-270 is a NMP free matte water-based polyurethane that is silica free and has excellent jettness, flexibility, and low gloss properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in co...veja mais Unithane MP-270 is a NMP free matte water-based polyurethane that is silica free and has excellent jettness, flexibility, and low gloss properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in coatings and graphic arts. veja menos | |
| GENOMER* 4256 | Rahn AG | GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...veja mais GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. veja menos | Request Sample |
| Dispurez 102 | Incorez Ltd. | Dispurez 102 é uma dispersão de poliuretano flexível, temperada e de autorreticulação com excelente claridade ótica e excelente resistência química e de bloco. Ao aplicar, a água se evapora para produzir um filme resistente, transparente e com bom brilho....veja mais Dispurez 102 é uma dispersão de poliuretano flexível, temperada e de autorreticulação com excelente claridade ótica e excelente resistência química e de bloco. Ao aplicar, a água se evapora para produzir um filme resistente, transparente e com bom brilho. Os filmes derivados de Dispurez 102 apresentam excelente resistência química, a manchas e aos raios UV. veja menos | Request Sample |
| Trixene BI 7641 | Baxenden Chemicals Ltd. | Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...veja mais Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7674 | Baxenden Chemicals Ltd. | Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...veja mais Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7675 | Baxenden Chemicals Ltd. | Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...veja mais Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7951 | Baxenden Chemicals Ltd. | Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under...veja mais Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| Trixene BI 7960 | Baxenden Chemicals Ltd. | Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured und...veja mais Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
| ADDITOL® P 932 | Allnex | Um agente de reticulação de prepolímero de uretano alifático, para uso com resinas de poliéster terminadas com hidróxila, para a fabricação de revestimentos em pó de poliuretano. Formulações baseadas em ADDITOL® P 932 exibem excelente resistência exterior...veja mais Um agente de reticulação de prepolímero de uretano alifático, para uso com resinas de poliéster terminadas com hidróxila, para a fabricação de revestimentos em pó de poliuretano. Formulações baseadas em ADDITOL® P 932 exibem excelente resistência exterior quando usadas com CRYLCOAT® 2839-0 (proporção de 72/28) e com CRYLCOAT® 2845-0 (proporção de 81/19). veja menos | Request Sample |
| TRM-PLP Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-PLP Rheology Modifier is a nonionic, solvent free, hydrophobically modified ethylene oxide urethane (HEUR) intended for waterborne architectural and functional coatings. This product can also be applied to interior and exterior high end paints | |
| RHEOLATE® FX 1010 | Elementis | RHEOLATE® FX 1010 rheological additive is a high efficient polyether polyurethane associative thickener (NISAT) for use in waterborne coatings and aqueous paint systems. This rheology modifier is supplied as a liquid, is convenient to handle and ready fo...veja mais RHEOLATE® FX 1010 rheological additive is a high efficient polyether polyurethane associative thickener (NISAT) for use in waterborne coatings and aqueous paint systems. This rheology modifier is supplied as a liquid, is convenient to handle and ready for immediate use. veja menos | Request Sample |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| ROPOL PC-12 | DKSH | ROPOL PC-12 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is a Polycarbonated based on 1,6 Hexanediol enables to obtain high performance polyurethane preparations, improving weather, heat and hydrolysis resistance. This product ...veja mais ROPOL PC-12 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is a Polycarbonated based on 1,6 Hexanediol enables to obtain high performance polyurethane preparations, improving weather, heat and hydrolysis resistance. This product is available for Europe and Asia. veja menos | Request Sample |
| K-KAT® XK-628 | King Industries, Inc. | K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appear...veja mais K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appears as a clear, amber liquid and is a made to give enhanced hydrolytic stability. This product offers good exterior ability, gloss retention, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is partially soluble in alcohols, esters, and is insoluble in water. This product can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams, and coatings. veja menos | |
| K-KAT® XC-B221 | King Industries, Inc. | K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...veja mais K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. veja menos | |
| K-KAT® 348 | King Industries, Inc. | K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...veja mais K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. veja menos | |
| CN9276 | Sartomer Americas | CN9276 is a tetrafunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. Key properties include toughness, excellent adhesion, scratch resistance, and non yellowing. It is particularly suitable for lithographi...veja mais CN9276 is a tetrafunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. Key properties include toughness, excellent adhesion, scratch resistance, and non yellowing. It is particularly suitable for lithographic inks, flexographic inks, and varnishes on plastic. veja menos | |
| Rexin 590 | S.A.P.I.C.I. SpA | Rexin 590 is a short-oil alkyd resin. This product dries well with good hardness, flexibility, colour retention and solving release. It can be used in pigmented or clear interior or exterior polyurethane coatings. This product is resistant to overspray...veja mais Rexin 590 is a short-oil alkyd resin. This product dries well with good hardness, flexibility, colour retention and solving release. It can be used in pigmented or clear interior or exterior polyurethane coatings. This product is resistant to overspray. veja menos | |
| ROPOL PC-11 | DKSH | ROPOL PC-11 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is Polycarbonated based on 1,6 Hexanediol enables to obtain high performance in polyurethane preparations, improving weather, heat and hydrolysis resistance. This product...veja mais ROPOL PC-11 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is Polycarbonated based on 1,6 Hexanediol enables to obtain high performance in polyurethane preparations, improving weather, heat and hydrolysis resistance. This product is available for Europe and Asia. veja menos | Request Sample |
| Polyol-32 | Macro Polymers Pvt. Ltd. | Polyol-32 is a specialty alkyd resin based on glycerine and anhydrous phthalic acid. This product has compatibility with drying oils, nitrocellulose, drying and non-drying alkyds, and aliphatic/aromatic isocyanates. It can be used as a polyol in polyurethane...veja mais Polyol-32 is a specialty alkyd resin based on glycerine and anhydrous phthalic acid. This product has compatibility with drying oils, nitrocellulose, drying and non-drying alkyds, and aliphatic/aromatic isocyanates. It can be used as a polyol in polyurethane finishes. veja menos | |
| Rexin DP 127 | S.A.P.I.C.I. SpA | Rexin DP 127 is a saturated polyester resin. This product has good abrasion and yellowing resistance. It can be used in high-gloss and fast-drying clear or pigmented 2K polyurethane coatings. It is particularly recommended for pigmented paste formulati...veja mais Rexin DP 127 is a saturated polyester resin. This product has good abrasion and yellowing resistance. It can be used in high-gloss and fast-drying clear or pigmented 2K polyurethane coatings. It is particularly recommended for pigmented paste formulations. veja menos | |
| VESTAMIN® TMD | Evonik Operations GmbH, BL Crosslinkers | Uma diamina alifática ramificada. É um líquido incolor com partes aproximadamente iguais de isómeros 2,2,4- e 2,4,4-trimetil hexametileno diamina. | Request Sample |
| Polurene HR.B.S. | S.A.P.I.C.I. SpA | Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% T...veja mais Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% TDI isocyanates. veja menos | |
| Rexin CM65 | S.A.P.I.C.I. SpA | Rexin CM65 is a short-oil alkyd resin. This product has good hardness, flexibility, colour retention and drying. It can be used in clear or pigmented interior or exterior polyurethane coatings. This product releases solvents quickly and is resistant to...veja mais Rexin CM65 is a short-oil alkyd resin. This product has good hardness, flexibility, colour retention and drying. It can be used in clear or pigmented interior or exterior polyurethane coatings. This product releases solvents quickly and is resistant to overspraying. veja menos | |
| SCABA | PCI Group, Inc. | SCABA is a light amber reactive polyamide resin solution that is intended to increase viscosity and improve sag resistance for pigmented systems. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and ...veja mais SCABA is a light amber reactive polyamide resin solution that is intended to increase viscosity and improve sag resistance for pigmented systems. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and polyester. veja menos | |
| CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...veja mais CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. veja menos | |
| AFCONA - 3085 | AFCONA Additives Sdn Bhd | AFCONA – 3085 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive that cross-links in polyurethane systems and baking paints. AFCONA – 3085 finds application in solvent-based co...veja mais AFCONA – 3085 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive that cross-links in polyurethane systems and baking paints. AFCONA – 3085 finds application in solvent-based coatings, including wood coatings. veja menos | |
| SETALUX® D A 265 BA | Allnex | Setalux D A 265 BA is a polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N 75 or N 3390, in the formulation of two-component polyurethane coatings with good gloss retention, light fastness and resistance to chalking. | Request Sample |
| Rexin HSP 05100 | S.A.P.I.C.I. SpA | Rexin HSP 05100 is a saturated polyester resin. This product has good abrasion and chemical resistance and good hardness and levelling. It can be used in high-gloss clear or pigmented 2K polyurethane coatings, especially those formulations with high sol...veja mais Rexin HSP 05100 is a saturated polyester resin. This product has good abrasion and chemical resistance and good hardness and levelling. It can be used in high-gloss clear or pigmented 2K polyurethane coatings, especially those formulations with high solids content. veja menos | |
| Unithane IC-805 | Union Specialties, Inc. | Unithane IC-805 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60º of 91 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated topcoat for wood, metal, concrete...veja mais Unithane IC-805 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60º of 91 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated topcoat for wood, metal, concrete, flooring, and graphic arts. veja menos | |
| Polydo PN-400 | Kukdo Chemical Co., Ltd. | Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...veja mais Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. veja menos | |
| Polydo PN-560 | Kukdo Chemical Co., Ltd. | Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...veja mais Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. veja menos | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. | |
| Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...veja mais Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). veja menos | |
| ESACOTE ST 47 | LEHVOSS Group | ESACOTE ST 47 is a water-borne polyurethane dispersion, based on polyether and aliphatic isocyanates. Its film is transparent, non sticky, very flexible, soft and rubber like. It is recommended for textile application, and for the formulation of coatings ...veja mais ESACOTE ST 47 is a water-borne polyurethane dispersion, based on polyether and aliphatic isocyanates. Its film is transparent, non sticky, very flexible, soft and rubber like. It is recommended for textile application, and for the formulation of coatings with a “soft touch” effect, alone or in combination with acrylic dispersions. A matt film can be obtained adding wax dispersions, silicas, polyurea based matting agents, or combination of them. veja menos | |
| ESACOTE UR 116 | LEHVOSS Group | ESACOTE UR 116 is a waterborne dispersion of an aliphatic polyurethane modified by fatty acids, surfactants free, which forms very hard and tough films with high degree of gloss and transparency. It is particularly suitable for wood coating, where good ch...veja mais ESACOTE UR 116 is a waterborne dispersion of an aliphatic polyurethane modified by fatty acids, surfactants free, which forms very hard and tough films with high degree of gloss and transparency. It is particularly suitable for wood coating, where good chemical resistance, adhesion and aesthetics issues are required and it can also be used only in combination with acrylic resins, having a MFFT not exceeding 30-35°C. veja menos | |
| Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...veja mais Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). veja menos | |
| Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...veja mais Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). veja menos | |
| Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...veja mais Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). veja menos | |
| CN964A85 | Sartomer Americas | CN964A85 is a resilient difunctional aliphatic polyester urethane acrylate oligomer, diluted in TPGDA for use in UV and EB curing coatings, inks, and adhesives. This product has excellent non-yellowing characteristics, medium tensile strength/high elongat...veja mais CN964A85 is a resilient difunctional aliphatic polyester urethane acrylate oligomer, diluted in TPGDA for use in UV and EB curing coatings, inks, and adhesives. This product has excellent non-yellowing characteristics, medium tensile strength/high elongation, low viscosity, and high reactivity. veja menos | |
| CN966H90 | Sartomer Americas | CN966H90 is a flexible difunctional aliphatic polyester urethane acrylate oligomer, diluted in 2-(2-ethoxyethoxy)ethyl acrylate for use in UV and EB curing coatings and inks. It is particularly suited for use in pressure sensitive adhesives and laminating...veja mais CN966H90 is a flexible difunctional aliphatic polyester urethane acrylate oligomer, diluted in 2-(2-ethoxyethoxy)ethyl acrylate for use in UV and EB curing coatings and inks. It is particularly suited for use in pressure sensitive adhesives and laminating adhesives. veja menos | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...veja mais Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. veja menos | |
| GENOMER* 4312 | Rahn AG | GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and pla...veja mais GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and plastics; wood and industrial coatings; and adhesives. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. veja menos | Request Sample |
| GENOMER* 4316 | Rahn AG | GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood an...veja mais GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. veja menos | Request Sample |
| Trixene BI 7642 | Baxenden Chemicals Ltd. | Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...veja mais Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. veja menos | |
| DM-831 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applicat...veja mais DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applications where good flexibility, soft hand feel and lower gloss properties are required. veja menos | |
| ECOPOLTEXT-40 V | Ecopol Tech | ECOPOLTEXT-40 V is an anionic aliphatic polyester-polyurethane dispersion, specifically designed for use in textile coating formulations. This product is suitable for all common textile coating processes in areas such as sports, clothing, fashion, technic...veja mais ECOPOLTEXT-40 V is an anionic aliphatic polyester-polyurethane dispersion, specifically designed for use in textile coating formulations. This product is suitable for all common textile coating processes in areas such as sports, clothing, fashion, technical articles, and general protective equipment. This product is used to improve both the technical and aesthetic properties of fabrics as it contributes to the look and feel of the fabric. veja menos | Request Sample |
| AFCONA - 4015 | AFCONA Additives Sdn Bhd | AFCONA – 4015 is a modified polyurethane polymer in a xylene, alkylbenzene, DIBK, and MEK solution. This product functions as a dispersant for co-grinding, functioning in high polar systems. AFCONA – 4015 contains strong acid and amine functional groups a...veja mais AFCONA – 4015 is a modified polyurethane polymer in a xylene, alkylbenzene, DIBK, and MEK solution. This product functions as a dispersant for co-grinding, functioning in high polar systems. AFCONA – 4015 contains strong acid and amine functional groups and finds application in coatings. veja menos | |
| KA-7101 | Keeneyes International Co., Ltd. | KA-7101is a matting powder mainly used for amine baking coating, PU and PE coating. It offers high matting efficiency, good transparency, and easy dispersibility. This product has no adverse effect on coating films. | |
| KA-7602 | Keeneyes International Co., Ltd. | KA-7602 is a matting powder for amine baking coatings, PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| Novalkyd S1352-60X | Novaresine S.r.l | Novalkyd S1352-60X is a modified saturated polyester resin that displays good pigment wettability as well as good leveling properties. The resin is ideal for PU clear or pigmented hard and flexible top coats. | |
| TA-816 | PCI Group, Inc. | TA-816 is a reactive siloxane polymer blend which can produce a rough or textured appearance to paints and coatings. It can be used with lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane systems. | |
| BRB Siloen® DA 290 | BRB International BV | BRB Siloen® DA 290 is solvent solution of a fluorosilicone fluid. It can be used as a silicone defoamer for solvent-free, solvent-borne, printing inks and ambient curing plastic system (epoxy and PU). | |
| UCECOAT® 7210 | Allnex | UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasi...veja mais UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH adjustment if required) with other waterborne UV resins to increase solid content and/or flexibility. veja menos | Request Sample |
| PChem® BM751 | Pioneer Chemicals Co., Ltd. | PChem® BM751, in the form of a powder, is an acrylic resin that provides good moisture curable reactive functionalities, adhesion, and chemical resistance. It is soluble in glycol ether acetates, esters, glycol ethers, ketones, aromatic, and is compatible with a extensive variety of other resins including esters, vinyl, acrylics, and is a binder for moisture curable reactive PU hot melt adhesive application especially for polyurethane...veja mais PChem® BM751, in the form of a powder, is an acrylic resin that provides good moisture curable reactive functionalities, adhesion, and chemical resistance. It is soluble in glycol ether acetates, esters, glycol ethers, ketones, aromatic, and is compatible with a extensive variety of other resins including esters, vinyl, acrylics, and is a binder for moisture curable reactive PU hot melt adhesive application especially for polyurethane adhesives. PChem® BM751 has a molecular weight of 25,000 g/mol, moisture content of equal to or less than 1.0%, acid value of less than 6.0 mgKOH/g, and an inherent viscosity of 0.13. veja menos | |
| Easaqua™ M 501 | Vencorex | Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane...veja mais Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. veja menos | |
| GENOMER* 4590/PP | Rahn AG | GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks ...veja mais GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; and wood and industrial coatings. The low viscosity in combination with the high functionality allows for an easy product handling. veja menos | Request Sample |
| UCECOAT® 2803 | Allnex | UCECOAT® 2803 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionically stabilized in water without any external emulsifier. It is not stable under acidic conditions. This product contains no co-...veja mais UCECOAT® 2803 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionically stabilized in water without any external emulsifier. It is not stable under acidic conditions. This product contains no co-solvent and exhibits favorable ink jetting properties associated with its water resolubility before cure. UCECOAT® 2803 provides hard cured coating along with good stain and chemical resistance. veja menos | Request Sample |
| Tetrahydrofurane (THF) | Penpet Petrochemical Trading GmbH | Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and polyurethane...veja mais Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and polyurethane. veja menos | |
| Unithane IC-100 | Union Specialties, Inc. | Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, ink...veja mais Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, inks, adhesives, and graphic arts. veja menos | |
| GENOMER* 4297 | Rahn AG | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...veja mais GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. veja menos | Request Sample |
| Neboplast® PCU 6401 | NECARBO B.V. | Neboplast® PCU 6401 is an aliphatic polyurethane dispersion in water. This white liquid has abrasion and chemical resistance, high hardness, a low solvent content, and a high MFFT content. Neboplast® PCU 6401 produces a transparent, tack-free film and fin...veja mais Neboplast® PCU 6401 is an aliphatic polyurethane dispersion in water. This white liquid has abrasion and chemical resistance, high hardness, a low solvent content, and a high MFFT content. Neboplast® PCU 6401 produces a transparent, tack-free film and finds application in high quality water based two-component floor and furniture lacquers. veja menos | |
| Polurgreen HR-01 | S.A.P.I.C.I. SpA | Polurgreen HR-01 is a low-monomer isocyanurate. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. It is composed of less than .1% TDI isocyanate, and is based in a butyl-acetate solvent. | |
| Uni-Dur E 2002 ARFE | S.A.P.I.C.I. SpA | Uni-Dur E 2002 ARFE is an adhesive that is soluble in ethyl acetate. This product significantly improves the adhesion, cohesion, and heat resistance of the final bond. It can be used to cross-link polyurethane adhesives for natural or synthetic rubber. | |
| AFCONA - 2727 | AFCONA Additives Sdn Bhd | AFCONA – 2727 is a silicone-based defoamer in a SBP spirit. This slightly hazy, clear yellow liquid functions as an anti-foam, de-aeration, and levelling agent for filled and unfilled epoxy, UPE, and polyurethane systems. AFCONA – 2727 finds application i...veja mais AFCONA – 2727 is a silicone-based defoamer in a SBP spirit. This slightly hazy, clear yellow liquid functions as an anti-foam, de-aeration, and levelling agent for filled and unfilled epoxy, UPE, and polyurethane systems. AFCONA – 2727 finds application in coatings. veja menos | |
| WorléeAdd ST-70 | Worlée-Chemie G.m.b.H. | O WorléeAdd ST-70 é um catalisador de octanoato de estanho de fluxo livre usado em revestimentos em pó de poliuretano. O produto é preparado a partir de um líquido de octoato de estanho e um pó de sílica amorfa. O W'Add ST-70 pode ser utilizado revestimen...veja mais O WorléeAdd ST-70 é um catalisador de octanoato de estanho de fluxo livre usado em revestimentos em pó de poliuretano. O produto é preparado a partir de um líquido de octoato de estanho e um pó de sílica amorfa. O W'Add ST-70 pode ser utilizado revestimentos em pó de poliéster-uretano e acrílico-uretano para aumentar a reatividade. veja menos | |
| Rexin 2268 | S.A.P.I.C.I. SpA | Rexin 2268 is a short-oil alkyd resin. This product has good hardness, yellowing resistance, and gloss. It can be used in clear or pigmented polyurethane coatings with high solids. It can also be used in enamels with high flexibility and hardness. | |
| ISOBEN 11 | Benasedo | ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce...veja mais ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce wood coatings for frames or parquets. veja menos | Request Sample |
| LIOPUR PFL 1964 | Synthopol Chemie Germany | LIOPUR PFL 1964 é uma dispersão aquosa de poliuretano alifático com base em um policarbonato. Após secagem ao ar, revestimentos de película a base de Liopur PFL 1964 formam filmes macios e elásticos. Liopur PFL 1964 é adequado como uma única pasta e em co...veja mais LIOPUR PFL 1964 é uma dispersão aquosa de poliuretano alifático com base em um policarbonato. Após secagem ao ar, revestimentos de película a base de Liopur PFL 1964 formam filmes macios e elásticos. Liopur PFL 1964 é adequado como uma única pasta e em combinação com poliésteres hidroxi-elásticos ou dispersões de poliuretano como sistema de 2 componentes para tintas de sensação macia e de decoração. Como parceiro de combinação a dispersão de poliuretano Liopur PFL 1953 baseado em um poliéster é recomendada a fim de encontrar o equilíbrio justo entre preço e desempenho. veja menos | |
| Kemapur® PCU 200 S | CTP Egypt S.A.E. CTP Original | Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring appli...veja mais Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring applications. veja menos | |
| MACRYNAL® SM 2855/70BAC | Allnex | Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties ...veja mais Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties in terms of chemical and solvent resistance. veja menos | Request Sample |
| Polydo SC-455 | Kukdo Chemical Co., Ltd. | Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer pro...veja mais Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. veja menos | |
| Blendex Seal DH 14 | Ichemco | Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile ap...veja mais Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile applications. veja menos |
