| Fillite Standard Grades | Tolsa SA | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...veja mais Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. veja menos | |
| Fillite White / High-Alumina Grades | Tolsa SA | Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, s...veja mais Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, sealants, coatings, cast resins, refractories, foundry applications, or high temperatures resistant coatings. veja menos | |
| GL-0237 | Mo-Sci Corporation | GL-0237 consists of solid clear amorphous silica microspheres with white color in powder form. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including calibration, high temperatures spacer...veja mais GL-0237 consists of solid clear amorphous silica microspheres with white color in powder form. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including calibration, high temperatures spacer material for gauge control, coating, and filler for plastics. veja menos | |
| GL-0271 | Mo-Sci Corporation | GL-0271 consists of E-glass spheres that are white to gray or greenish in color. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including conductive filler for plastic and pigment. | |
| GL-0715 | Mo-Sci Corporation | GL-0715 consists of solid glass microspheres with light yellow color in powder form. It eliminates the environmental impact and requirements on leaded glass products. It can be used as high temperatures spacer material for gauge control, coating, filler...veja mais GL-0715 consists of solid glass microspheres with light yellow color in powder form. It eliminates the environmental impact and requirements on leaded glass products. It can be used as high temperatures spacer material for gauge control, coating, filler for plastic, and retro-reflection applications. veja menos | |
| GL-1611 | Mo-Sci Corporation | GL-1611 consists of porous walled, hollow glass microspheres with white color in powder form. It is a glass extender for liquid resin systems. It can be used for thermal insulation in coating systems. | |
| GL-1619 | Mo-Sci Corporation | GL-1619 consists of borosilicate glass microspheres with a metallic cerium oxide coating that appears to be white or pink in color. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including ...veja mais GL-1619 consists of borosilicate glass microspheres with a metallic cerium oxide coating that appears to be white or pink in color. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including conductive filler for plastic and pigment. veja menos | |
| Glass Beads / Glass Microspheres | Anhui Elite Industrial Co., Ltd | Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traf...veja mais Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traffic marking paint. veja menos | |
| Hollow Glass Microspheres T20 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adj...veja mais Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adjusts the density of paint. veja menos | |
| Hollow Glass Microspheres T25 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adj...veja mais Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adjusts the density of paint. veja menos | |
| Hollow Glass Microspheres T32 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adj...veja mais Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adjusts the density of paint. veja menos | |
| Hollow Glass Microspheres T40 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adj...veja mais Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adjusts the density of paint. veja menos | |
| Hollow Glass Microspheres T46 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adj...veja mais Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adjusts the density of paint. veja menos | |
| Hollow Glass Microspheres T60 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adj...veja mais Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adjusts the density of paint. veja menos | |
| Microsil 100 | Tolsa SA | Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor....veja mais Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. veja menos | |
| Microsil 100S | Tolsa SA | Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting...veja mais Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. veja menos | |
| Microsil 200 | Tolsa SA | Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. ...veja mais Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. veja menos | |
| Microsil 200S | Tolsa SA | Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting f...veja mais Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. veja menos | |
| Microsil 325 | Tolsa SA | Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be ...veja mais Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. veja menos | |
| Microsil 325S | Tolsa SA | Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in a...veja mais Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in applications where a lower viscosity or smaller absorption is required. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. veja menos | |
| Pansil UltraSpheres™ 2000 | Tolsa SA | Pansil UltraSpheres™ 2000 consists of ceramic microspheres. It is used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in film/antiblock applications, top coats, high solid industrial coatings, an...veja mais Pansil UltraSpheres™ 2000 consists of ceramic microspheres. It is used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in film/antiblock applications, top coats, high solid industrial coatings, and decorative powder coatings. veja menos | |
| Pansil UltraSpheres™ 4000 | Tolsa SA | Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marin...veja mais Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primers. veja menos | |
| Pansil UltraSpheres™ 6000 | Tolsa SA | Pansil UltraSperes™ 6000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction mater...veja mais Pansil UltraSperes™ 6000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction materials. veja menos | |
| Pansil UltraSpheres™ 8000 | Tolsa SA | Pansil UltraSpheres™ 8000 consists of ceramic microspheres. They are used as additives and fillers and paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction mater...veja mais Pansil UltraSpheres™ 8000 consists of ceramic microspheres. They are used as additives and fillers and paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction materials. veja menos | |
| Prizmalite P2011SL | Prizmalite Industries Inc. | Prizmalite P2011SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 3 to 6 microns. Prizmalite P2011SL can be used in solvent and water-based paint applications. | |
| Prizmalite P2050SL | Prizmalite Industries Inc. | Prizmalite P2050SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 35 to 45 microns. Prizmalite P2050SL can be used in textile and vinyl coatings, solvent and water-based coating...veja mais Prizmalite P2050SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 35 to 45 microns. Prizmalite P2050SL can be used in textile and vinyl coatings, solvent and water-based coatings, and tactile coatings. veja menos | |
| Prizmalite P2075SL | Prizmalite Industries Inc. | Prizmalite P2075SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 65 to 75 microns. Prizmalite P2075SL can be used in textile and vinyl coatings, solvent and water-based coating...veja mais Prizmalite P2075SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 65 to 75 microns. Prizmalite P2075SL can be used in textile and vinyl coatings, solvent and water-based coatings, and tactile coatings. veja menos | |
| Prizmalite P2453BTA | Prizmalite Industries Inc. | Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coating...veja mais Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coatings, solvent and water-based coatings, reflective plastisol inks, tactile coatings, and reflective powder coatings. veja menos |
