| HVAMA | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to ...veja mais HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. HVAMA is used primarily for air-dry finishes, such as maintenance, marine and metal coating, can sealed paint, wood and glass coating, metal inks, and adhesive for binder nails. veja menos | |
| Griltex® ES 500 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 500 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 500 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-200 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 501 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 501 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 501 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 160-180 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 502 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 502 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 502 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 503 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 503 is a hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissi...veja mais Griltex® ES 503 is a hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 180-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 504 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 504 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 504 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 505 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 505 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 505 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 180-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 700 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 700 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 700 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 130-170 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 702 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 702 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 702 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 160-190 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 703 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 703 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 703 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210°C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 701 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 701 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 701 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 130-160 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| Griltex® ES 704 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 704 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...veja mais Griltex® ES 704 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-190 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. veja menos | |
| VESTOPLAST® 308 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 308 é uma categoria funcionalizada. Aplicação: Matéria prima para produção de adesivos de derretimento quente para colagem de metal substratos polares. | Request Sample |
| PChem® BM82 | Pioneer Chemicals Co., Ltd. | PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive...veja mais PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. veja menos | |
| High Chlorinated Polyethylene-YURON HCPE-H (A) | Yuron New Material 裕隆新材料 | High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high mole...veja mais High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high molecular weight, high viscosity and strong adhesive force. It can be dissolved in toluene, xylene, and dichloroethane. This product can bind all kinds of PVC or CPE tubes, pipes, and plates, replace CPVC adhesives, bond metal materials. and can be used as an adhesive in the fiber industry. veja menos | |
| L-2918 | Chan Sieh Enterprises Co, Ltd. | L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal ...veja mais L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal and plastic. veja menos | |
| SHIKOH™ UV-3000B | Nippon Gohsei | SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...veja mais SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. veja menos | |
| SHIKOH™ UV-3200B | Nippon Gohsei | SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...veja mais SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. veja menos | |
| KEPERADH®-927 | Kito Chem | KEPERADH®-927 is an adhesive, made of a polyester with special structure. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of aluminum paints. Also it can be used to improve the wetting and solve the adhesion prob...veja mais KEPERADH®-927 is an adhesive, made of a polyester with special structure. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of aluminum paints. Also it can be used to improve the wetting and solve the adhesion problem under low dosage for most formulations. It can be useful for the sliver-dropping problem in the aluminum air-dry coating. As well as good adhesion to glass, plastic and metal or non-metal substrates. veja menos | |
| SHIKOH™ UV-3500BA | Nippon Gohsei | SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and elec...veja mais SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, adhesive films and labels. veja menos | |
| High Chlorinated Polyethylene Adhesive Level - YURON HCPE-H(B) | Yuron New Material 裕隆新材料 | YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, ...veja mais YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, and so on. veja menos | |
| SHIKOH™ UV-3300B | Nippon Gohsei | SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive f...veja mais SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive films and labels, and optical applications. veja menos | |
| SiSiB® PC1710 | SiSiB SILICONES | SiSiB® PC1710 is a yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesive promoter in silane-crossl...veja mais SiSiB® PC1710 is a yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesive promoter in silane-crosslinking formulations, such as adhesive sealants, and coatings; or as a surface modifier for fillers (like glass, metal oxides, aluminum hydroxide, kaolin, wollastonite, mica) and pigments. veja menos | |
| Dymax 8-20626 | Bomar, formerly Dymax Oligomers & Coatings | Dymax 8-20626 is an epoxy resin adhesive that forms bonds to a variety of materials. Bonds form rapidly between close-fitting substrates upon induction or heat curing. Dymax 8-20626 exhibits thermal shock characteristics and adhesion to a wide variety of ...veja mais Dymax 8-20626 is an epoxy resin adhesive that forms bonds to a variety of materials. Bonds form rapidly between close-fitting substrates upon induction or heat curing. Dymax 8-20626 exhibits thermal shock characteristics and adhesion to a wide variety of plated surfaces. It is formulated as a one-part epoxy adhesive, and requires no mixing or activator application. Dymax 8-20626 can be used on metal surfaces, glass, ceramics, thermoset plastics, and filled nylon. veja menos | |
| VAM | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VAM is a high molecular weight resin containing approximately 86 percent vinyl chloride, 13 percent vinyl acetate, and 1 percent maleic anhydride. The carboxyl functional group allows VAM to adhere to metal while still being resistant to water, oil, ester...veja mais VAM is a high molecular weight resin containing approximately 86 percent vinyl chloride, 13 percent vinyl acetate, and 1 percent maleic anhydride. The carboxyl functional group allows VAM to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. VAM is used for can sealed paint, shoe adhesive, floor paint, silk screen printing, and transfer ink, as well as electro-chemical aluminum paint, and thermal transfer adhesive. veja menos | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...veja mais UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. veja menos | |
| AC-70 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-70 is a Vinyltri tert-butyl peroxide silane with the chemical formula of C14H30O6Si and comes as a yellowish liquid. Primarily used as an adhesive and sealant, it is used extensively in the rubber industry. AC-70 can bond to other rubber, silicon, and ...veja mais AC-70 is a Vinyltri tert-butyl peroxide silane with the chemical formula of C14H30O6Si and comes as a yellowish liquid. Primarily used as an adhesive and sealant, it is used extensively in the rubber industry. AC-70 can bond to other rubber, silicon, and metal substrates. veja menos | |
| AD-4000L | Chan Sieh Enterprises Co, Ltd. | AD-4000L is an ethylene vinyl acetate copolymer adhesive resin in the form of a white emulsion. This product features good heat resistance and excellent bonding strength with PVC sheet. It can be used as an adhesive for aluminum foil and paper, and in t...veja mais AD-4000L is an ethylene vinyl acetate copolymer adhesive resin in the form of a white emulsion. This product features good heat resistance and excellent bonding strength with PVC sheet. It can be used as an adhesive for aluminum foil and paper, and in the lamination of PVC sheet and plywood. veja menos | |
| Chlorinated Rubber-YURON CR-400 | Yuron New Material 裕隆新材料 | YURON CR-400 é uma borracha clorada fornecida como um pó branco. É utilizada principalmente como matéria-prima adesiva de borracha para aplicações de metal. Este produto é solúvel na maioria dos solventes aromáticos, como tolueno ou xileno e também é solú...veja mais YURON CR-400 é uma borracha clorada fornecida como um pó branco. É utilizada principalmente como matéria-prima adesiva de borracha para aplicações de metal. Este produto é solúvel na maioria dos solventes aromáticos, como tolueno ou xileno e também é solúvel na maioria dos ésteres. veja menos | |
| SONGNOX® 1024 | Songwon International AG | SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (...veja mais SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (particularly SONGNOX® 1010) to achieve synergistic performance. veja menos | |
| Chlorinated Rubber-YURON CR-130 | Yuron New Material 裕隆新材料 | YURON CR-130 é uma borracha clorada fornecida como um pó branco. É utilizada principalmente como matéria-prima adesiva de borracha para aplicações de metal. Este produto é solúvel na maioria dos solventes aromáticos, como tolueno ou xileno, e também é sol...veja mais YURON CR-130 é uma borracha clorada fornecida como um pó branco. É utilizada principalmente como matéria-prima adesiva de borracha para aplicações de metal. Este produto é solúvel na maioria dos solventes aromáticos, como tolueno ou xileno, e também é solúvel na maioria dos ésteres. veja menos | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...veja mais Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. veja menos | |
| Chlorinated Rubber-YURON CR-170 | Yuron New Material 裕隆新材料 | YURON CR-170 é um produto de borracha clorada fornecido como um pó branco. É utilizada principalmente como matéria-prima adesiva de borracha para aplicações de metal. Este produto é solúvel na maioria dos solventes aromáticos, como tolueno ou xileno e tam...veja mais YURON CR-170 é um produto de borracha clorada fornecido como um pó branco. É utilizada principalmente como matéria-prima adesiva de borracha para aplicações de metal. Este produto é solúvel na maioria dos solventes aromáticos, como tolueno ou xileno e também, também é solúvel na maioria dos ésteres. veja menos | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...veja mais L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. veja menos | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...veja mais DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. veja menos | |
| Epoxies® 10-2055I | Epoxies, Etc. | Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I pro...veja mais Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. veja menos | |
| Epoxies® 10-2055P | Epoxies, Etc. | Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P pro...veja mais Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. veja menos | |
| Epoxies® 10-2055PHV | Epoxies, Etc. | Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV...veja mais Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotropic upon mixing. veja menos | |
| Epoxies® 10-2080I | Epoxies, Etc. | Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produc...veja mais Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. veja menos | |
| Epoxies® 10-2080P | Epoxies, Etc. | Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produc...veja mais Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. veja menos | |
| Epoxies® 10-2080PHV | Epoxies, Etc. | Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV pr...veja mais Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. veja menos | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...veja mais Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. veja menos | |
| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...veja mais BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. veja menos | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...veja mais DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. veja menos | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...veja mais DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. veja menos | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...veja mais DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. veja menos | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...veja mais PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. veja menos | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...veja mais DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. veja menos | |
| Poly(1,2-dihydro-2,2,4-trimethylquinoline) | Hainan Zhongxin Chemical Co., Ltd. | Poly(1,2-dihydro-2,2,4-trimethylquinoline), synonymous with RD, Tlectol TMQ, Vulkanox HS and Accinox TQ, is amber to brown granules and is primarily used as an antioxidant in rubbers and adhesives. It can impart heat, oxygen and fatigue resistance to most...veja mais Poly(1,2-dihydro-2,2,4-trimethylquinoline), synonymous with RD, Tlectol TMQ, Vulkanox HS and Accinox TQ, is amber to brown granules and is primarily used as an antioxidant in rubbers and adhesives. It can impart heat, oxygen and fatigue resistance to most products as well as a stronger inhibitory effect for metal catalytic oxidation. It is widely used in the manufacture of tires, motorcycles births, bicycles births, rubber, plastic, adhesive tape, wires, cables and other rubber products. veja menos | |
| SiSiB® PC1108 | SiSiB SILICONES | SiSiB® PC1108 is a yellowish clear liquid with an amine-like odor. It may act as an adhesive promoter between inorganic materials and organic polymers, as a surface modifier, or for chemical modification of substrates. It can be used to improve flexural s...veja mais SiSiB® PC1108 is a yellowish clear liquid with an amine-like odor. It may act as an adhesive promoter between inorganic materials and organic polymers, as a surface modifier, or for chemical modification of substrates. It can be used to improve flexural strength, tensile strength, impact strength and modulus of elasticity; moisture and corrosion resistance; adhesion; or filler dispersion. It can be used for applications including glass fiber/glass fabric composites; metal primers; as additive to phenolic resin binders for mineral fiber insulating materials and abrasives; as additive to phenolic, furane and melamine resins; as a primer or additive in sealants and adhesives; as mineral-filled polymers (composites) or HFFR cables; as pretreatment of fillers and pigments; or for improvement of adhesive to the substrate in paints and coatings. veja menos | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...veja mais CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. veja menos | |
| VMC | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VMC is a medium molecular weight resin containing approximately 83 percent vinyl chloride, 16 percent vinyl acetate, and 1 percent maleic acid. The carboxyl functional group allows VMC to adhere to metal while still being resistant to water, oil, ester, a...veja mais VMC is a medium molecular weight resin containing approximately 83 percent vinyl chloride, 16 percent vinyl acetate, and 1 percent maleic acid. The carboxyl functional group allows VMC to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. VMC is used for air-dry finishes, such as maintenance, marine, metal, and can coatings, as well as interbedded adhesives, thermal transfer adhesives, shoe adhesives, and metal inks. veja menos | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...veja mais R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. veja menos | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...veja mais DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. veja menos | |
| VMA | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VMA is a low molecular weight resin containing approximately 81 percent vinyl chloride, 17 percent vinyl acetate, and 2 percent maleic acid. The carboxyl functional group allows VMA to adhere to metal while still being resistant to chemicals. VMA yields t...veja mais VMA is a low molecular weight resin containing approximately 81 percent vinyl chloride, 17 percent vinyl acetate, and 2 percent maleic acid. The carboxyl functional group allows VMA to adhere to metal while still being resistant to chemicals. VMA yields the balance of solubility and viscosity properties needed for high-build, air-dry maintenance finishes, and is often used to make coatings and adhesives applications where higher solids are desirable. VMA can be used in air-dry finishes, such as maintenance, marine, and metal coatings. It is also used in interbedded adhesives, thermal transfer adhesives, shoe adhesives, ink-jet and metal inks. veja menos | |
| TRM-Wet Adhesion Monomer IV | Dalian Trimer Chemical Co., Ltd. | TRM-Wet Adhesion Monomer IV is used for coatings and in adhesives as well as metal and concrete surface protection applications. | |
| KEPERADH®-932 | Kito Chem | KEPERADH®-932 is an adhesive, made of a polyester with special structure. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of aluminum paints. Also it can be used to improve the wetting and solve the adhesion prob...veja mais KEPERADH®-932 is an adhesive, made of a polyester with special structure. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of aluminum paints. Also it can be used to improve the wetting and solve the adhesion problem under low dosage for most formulations. It can be useful for the sliver-dropping problem in the aluminum air-dry coating. As well as good knife coating color exhibition capability of fine silver applications. veja menos | |
| KEPERADH®-928 | Kito Chem | KEPERADH®-928 is an adhesive, made of a polyester with special structure. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of aluminum paints. Also it can be used to improve the wetting and solve the adhesion prob...veja mais KEPERADH®-928 is an adhesive, made of a polyester with special structure. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of aluminum paints. Also it can be used to improve the wetting and solve the adhesion problem under low dosage for most formulations. It can be useful for the sliver-dropping problem in the aluminum air-dry coating. As well as good knife coating color exhibition capability of fine silver applications. veja menos | |
| Viscoatex™ 560 | Arkema Rheology & Specialty Additives | Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type,...veja mais Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type, surfactant and co-solvent. veja menos | Request Sample |
| MIRAMER M166 | Rahn AG | MIRAMER M166 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in pressure sensitive adhesives, plastic coatings and metal varnishes. | Request Sample |
| MIRAMER M216 | Rahn AG | MIRAMER M216 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in pressure sensitive adhesives, metal varnishes, plastic coatings, wood coatings and printing inks. | Request Sample |
| Nichigo-Polyester LP033 | Nippon Gohsei | Nichigo-Polyester LP033 is a high molecular weight saturated polyester resin featuring good metal adhesion. This product is well suited for use in coatings, primers, laminates, and polyester adhesives. | |
| MIRAMER M164 | Rahn AG | MIRAMER M164 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and metal varnishes. It exhibits high flexibility, good adhesion and low ...veja mais MIRAMER M164 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and metal varnishes. It exhibits high flexibility, good adhesion and low shrinkage. veja menos | Request Sample |
| GENOMER* 1121M | Rahn AG | GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coa...veja mais GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coatings on glass; adhesives; and polymerization and copolymerization in emulsions and solutions. veja menos | Request Sample |
| SHIKOH™ UV-7610B | Nippon Gohsei | SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive...veja mais SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| MIRAMER M340 | Rahn AG | MIRAMER M340 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; wood and industrial coatings; metal varnishes; solder masks; ...veja mais MIRAMER M340 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; wood and industrial coatings; metal varnishes; solder masks; and printing inks. veja menos | Request Sample |
| GENORAD* 40 | Rahn AG | GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varn...veja mais GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varnishes, adhesives and overprint varnishes. It improves adhesion on metal. veja menos | Request Sample |
| MIRAMER M210 | Rahn AG | MIRAMER M210 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks, metal varnishes and plastic coatings. | Request Sample |
| Crestabond® M1-04 | Scott Bader | Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...veja mais Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. veja menos | |
| Crestabond® M1-05 | Scott Bader | Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...veja mais Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. veja menos | |
| Crestabond® M1-20 | Scott Bader | Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...veja mais Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. veja menos | |
| Crestabond® M1-30 | Scott Bader | Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...veja mais Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. veja menos | |
| Crestabond® M1-60 | Scott Bader | Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...veja mais Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. veja menos | |
| Crestabond® M1-90 | Scott Bader | Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...veja mais Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. veja menos | |
| Crestabond® M7-05 | Scott Bader | Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...veja mais Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. veja menos | |
| Crestabond® M7-15 | Scott Bader | Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstratin...veja mais Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. veja menos | |
| CV-1161 | NuSil Silicone Technology 1 | CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This ...veja mais CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This product is ideal for adhering and bonding silicone elastomers, metals, paper, glass, fabric organics rubbers, some synthetics, and films such as polyester or kapton. veja menos | |
| GENOMER* 7151 | Rahn AG | GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use...veja mais GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. veja menos | Request Sample |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...veja mais Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. veja menos | |
| GENOMER* 4230 | Rahn AG | GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulat...veja mais GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations. This product is recommended for use in the following applications: coatings for metal and plastic; printing inks; laminating adhesives; and peroxide curing. veja menos | Request Sample |
| GENOMER* 5142 | Rahn AG | GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in th...veja mais GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in the following applications: overprint varnishes, coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. veja menos | Request Sample |
| GENORAD* 41 | Rahn AG | GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations fro...veja mais GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations from 1% to 5%. veja menos | Request Sample |
| Epokukdo KR-170 | Kukdo Chemical Co., Ltd. | Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used in formulating for the floor coating, molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. This product having medium-high viscosity is suitable for using in non-solvent adhesive, resin mortar, construction applications and flexible coating. KR-170 is particularly suitable for being applied on non-polar substrate surfaces such as PE or PP, greasy surface or oily surface of metal...veja mais Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used in formulating for the floor coating, molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. This product having medium-high viscosity is suitable for using in non-solvent adhesive, resin mortar, construction applications and flexible coating. KR-170 is particularly suitable for being applied on non-polar substrate surfaces such as PE or PP, greasy surface or oily surface of metals and so forth. veja menos | |
| Crestomer® 1186PA | Scott Bader | Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and off...veja mais Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and offers structural adhesion even when bonding FRP laminates with a 30mm thick bondline. The multi-purpose gap filling structural adhesive is used in a variety of FRP applications. veja menos | |
| Polyester Actylate SP 224 | Soltech Ltd | Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives...veja mais Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives, and screen inks. Polyester Actylate SP 224 is 70% polymer solid by weight with a viscosity of 50,000-100,000 at 25℃. veja menos | |
| Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...veja mais Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. veja menos | |
| GENOMER* 5161 | Rahn AG | GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use ...veja mais GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use in the following applications: overprint varnishes; coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. veja menos | Request Sample |
| Unithane IC-100 | Union Specialties, Inc. | Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, ink...veja mais Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, inks, adhesives, and graphic arts. veja menos | |
| MIRAMER M170 | Rahn AG | MIRAMER M170 is a 2-(2-ethoxyethoxy) ethylacrylate (EOEOEA). It is a reactive diluent for radically curable coatings and adhesives. The product has a high cutting power in combination with good reactivity. This product is recommended for use in the follow...veja mais MIRAMER M170 is a 2-(2-ethoxyethoxy) ethylacrylate (EOEOEA). It is a reactive diluent for radically curable coatings and adhesives. The product has a high cutting power in combination with good reactivity. This product is recommended for use in the following applications: pressure sensitive adhesives; printed circuit boards; metal, plastic and paper coatings; and PVC flooring. veja menos | Request Sample |
| SEPOLSION G315 | Sumitomo Seika Chemicals Co., Ltd. | SEPOLSION G315 is an aqueous emulsion composed of ethylene-glycidyl methacrylate copolymer resin. By utilizing high reactivity of the epoxy group, SEPOLSION G515 shows excellent adhesive strength for a variety of materials such as glass, paper, plastics, ...veja mais SEPOLSION G315 is an aqueous emulsion composed of ethylene-glycidyl methacrylate copolymer resin. By utilizing high reactivity of the epoxy group, SEPOLSION G515 shows excellent adhesive strength for a variety of materials such as glass, paper, plastics, metals. SEPOLSION G515 can be applied for adhesive on all kinds of substrates, sizing agent, and improvement additive. veja menos | |
| CV2-1161 | NuSil Silicone Technology 1 | CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal...veja mais CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal for bonding and adhering silicone elastomers, paper, metals, glass, fabric, films, and some synthetics. It can also be used for applications that require low outgassing and minimal volatile condensable materials. veja menos | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...veja mais R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. veja menos | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...veja mais R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. veja menos | |
| Methylene Chloride | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Methylene Chloride is an organic compound with the formula CH2Cl2. It has multiple applications for use in the production of adhesives, polyurethane foam, solvents in safety film, reaction medium in pharmaceuticals, paint strippers and removers, metal cle...veja mais Methylene Chloride is an organic compound with the formula CH2Cl2. It has multiple applications for use in the production of adhesives, polyurethane foam, solvents in safety film, reaction medium in pharmaceuticals, paint strippers and removers, metal cleaning and degreasers. veja menos | |
| Silane USi-2H21 | Nanjing Union Silicon Chemical Co., Ltd. | Silane USi-2H21 is an epoxy functional organosilane. This product appears as a colorless, transparent liquid. It can be used in adhesives and sealants in order to improve the adhesion of polyurethane, acrylic, epoxy, or silicon rubber to glass or metal ...veja mais Silane USi-2H21 is an epoxy functional organosilane. This product appears as a colorless, transparent liquid. It can be used in adhesives and sealants in order to improve the adhesion of polyurethane, acrylic, epoxy, or silicon rubber to glass or metal substrates. Also used as an adhesion promoter for such resins as epoxies, phenolics and polyesters veja menos | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...veja mais Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. veja menos | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...veja mais Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. veja menos | |
| Unithane IC-505 | Union Specialties, Inc. | Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is suitable for use in a formulated primer coat for concrete, automotive, metal, graphic arts, and adhesive...veja mais Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is suitable for use in a formulated primer coat for concrete, automotive, metal, graphic arts, and adhesives. veja menos | |
| R33-2186 | NuSil Silicone Technology 1 | R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...veja mais R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). veja menos | |
| GENOMER* 3497 | Rahn AG | GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coat...veja mais GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coatings, printing inks and varnishes for plastic foils and protective coatings for metals. veja menos | Request Sample |
