| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Andisil MOH 1,000 | AB Specialty Silicones | Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone ro...veja mais Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil MOH 10,000 | AB Specialty Silicones | Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone...veja mais Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil MOH 50,000 | AB Specialty Silicones | Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone...veja mais Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil MOS | AB Specialty Silicones | Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like met...veja mais Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like metals or marble. veja menos | |
| Andisil MT 9010 | AB Specialty Silicones | Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like met...veja mais Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like metals or marble. veja menos | |
| Andisil OH 1,000 | AB Specialty Silicones | Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temp...veja mais Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 14,000 | AB Specialty Silicones | Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room t...veja mais Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 2,000 | AB Specialty Silicones | Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temp...veja mais Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 20,000 | AB Specialty Silicones | Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room t...veja mais Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 30 | AB Specialty Silicones | Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcaniz...veja mais Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 300,000 | AB Specialty Silicones | Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone roo...veja mais Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 3,500 | AB Specialty Silicones | Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temp...veja mais Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 40 | AB Specialty Silicones | Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcan...veja mais Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 4,000 | AB Specialty Silicones | Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temp...veja mais Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 50,000 | AB Specialty Silicones | Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room t...veja mais Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 6,000 | AB Specialty Silicones | Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temp...veja mais Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 70 | AB Specialty Silicones | Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulca...veja mais Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 750 | AB Specialty Silicones | Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperatur...veja mais Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil OH 80,000 | AB Specialty Silicones | Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room t...veja mais Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. veja menos | |
| Andisil POS | AB Specialty Silicones | Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like met...veja mais Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like metals or marble. veja menos | |
| Andisil TT 5050 | AB Specialty Silicones | Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive sub...veja mais Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive substrates like metals or marble. veja menos | |
| Andisil VOS | AB Specialty Silicones | Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like meta...veja mais Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like metals or marble. veja menos | |
| Andisil VT 6535 | AB Specialty Silicones | Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like met...veja mais Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like metals or marble. veja menos | |
| Andisil VT 8218 | AB Specialty Silicones | Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like met...veja mais Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like metals or marble. veja menos | |
| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...veja mais Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. veja menos | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...veja mais CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. veja menos | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® 138 é um aditivo multifunctional para pigmentos e molhabilidade de substratos. Este tensoativo não-iônico é usado geralmente sozinho ou em combinação com tensoativos aniônicos. Este tensoativo econômico pode providenciar uma molhabilidade rápid...veja mais Carbowet® 138 é um aditivo multifunctional para pigmentos e molhabilidade de substratos. Este tensoativo não-iônico é usado geralmente sozinho ou em combinação com tensoativos aniônicos. Este tensoativo econômico pode providenciar uma molhabilidade rápida para substratos e pigmentos e ajudar a melhorar uma grande variedade de aplicações. veja menos | |
| Dimethyl Sebacate (DMS) | Chemceed | Sebacato de dimetilo (DMS) é um plastificante para nitrocelulose, borracha e resinas vinílicas. Sebacato de dimetilo é usado na produção de estabilizadores de luz que são utilizados nos revestimentos para proteger as superfícies e os pigmentos contra foto...veja mais Sebacato de dimetilo (DMS) é um plastificante para nitrocelulose, borracha e resinas vinílicas. Sebacato de dimetilo é usado na produção de estabilizadores de luz que são utilizados nos revestimentos para proteger as superfícies e os pigmentos contra fotodegradação pela desativação de radicais livres. Sebacato de dimetilo também pode ser usado como um solvente para resinas e borrachas. Nas tintas e nos revestimentos, DMS pode suavizar os aglutinantes para melhorar a flexibilidade. veja menos | |
| Eunox AO-1098 | Eutec Chemical Co., Ltd. | Eunox AO-1098 is a white to off-white crystalline powder with a melting point between 156-162℃. This product is an efficient hindered phenolic antioxidant for the stabilization of polyamide molded parts, fibers and films in addition to be recommended for ...veja mais Eunox AO-1098 is a white to off-white crystalline powder with a melting point between 156-162℃. This product is an efficient hindered phenolic antioxidant for the stabilization of polyamide molded parts, fibers and films in addition to be recommended for polymers such as adhesives, elastomers and other other organic substrates. veja menos | |
| Eunox AO-1222 | Eutec Chemical Co., Ltd. | Eunox AO-1222 is a white to off-white, free-flowing powder and a phenolic antioxidant that contains phosphorus used as an efficient, non-discoloring stabilizer. This product is used for organic substrates including adhesives for protection against thermo-...veja mais Eunox AO-1222 is a white to off-white, free-flowing powder and a phenolic antioxidant that contains phosphorus used as an efficient, non-discoloring stabilizer. This product is used for organic substrates including adhesives for protection against thermo-oxidative degradation. veja menos | |
| Eunox AO-129 | Eutec Chemical Co., Ltd. | Eunox AO-129 is a white crystalline powder and a primary antioxidant for organic polymers during processing–reducing viscosity change and gel formation. This product provides long-term heat stability in products including adhesives. | |
| Eunox AO-136 | Eutec Chemical Co., Ltd. | Eunox AO-136 is a white powder with a melting point between 130-135℃. This product is used as an antioxidant in several polymers including elastomers and adhesives. | |
| Eunox AO-1425 | Eutec Chemical Co., Ltd. | Eunox AO-1425 is an odorless white to off-white powder and a high molecular weight phenolic antioxidant that contains phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives for protection against th...veja mais Eunox AO-1425 is an odorless white to off-white powder and a high molecular weight phenolic antioxidant that contains phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives for protection against thermo-oxidative degradation while retaining strong color retention. veja menos | |
| Eunox AO-1425 (HQ) | Eutec Chemical Co., Ltd. | Eunox AO-1425 (HQ) is an odorless white to off-white powder, multifunctional additive and a high molecular weight phenolic antioxidant containing phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesiv...veja mais Eunox AO-1425 (HQ) is an odorless white to off-white powder, multifunctional additive and a high molecular weight phenolic antioxidant containing phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives. It protects against thermo-oxidative degradation and has strong color retention and compatibility. veja menos | |
| Eunox AO-1726 | Eutec Chemical Co., Ltd. | Eunox AO-1726 is a solid of 4,6-Bis(dodecylthiomethyl)-o-cresol. This product is a thermo-oxidative stabilizer for adhesives, particularly for hot melt solvent and water born adhesives. It can also be applied to copolymers and PUR products such as PU seal...veja mais Eunox AO-1726 is a solid of 4,6-Bis(dodecylthiomethyl)-o-cresol. This product is a thermo-oxidative stabilizer for adhesives, particularly for hot melt solvent and water born adhesives. It can also be applied to copolymers and PUR products such as PU sealants. veja menos | |
| Eunox AO-445 | Eutec Chemical Co., Ltd. | Eunox AO-445 is a white crystalline powder and an effective non-discoloring aromatic amine type antioxidant. It can be used as a thermal stabilizer in many applications including hot melt adhesives. | |
| Eunox AO-445 | Eutec Chemical Co., Ltd. | Eunox AO-445 is a white crystalline powder and a non-toxic, tasteless and light colored antioxidant. This product can be applied to adhesives and provides resistance to heat, light and aging. | |
| Eunox AO-565 | Eutec Chemical Co., Ltd. | Eunox AO-565 is a white to off-white powder is an antioxidant and stabilizer used in hot melt and solvent-based adhesives as well as natural and synthetic tackifier resins. This product only requires low concentrations for effectiveness, is non-staining d...veja mais Eunox AO-565 is a white to off-white powder is an antioxidant and stabilizer used in hot melt and solvent-based adhesives as well as natural and synthetic tackifier resins. This product only requires low concentrations for effectiveness, is non-staining due to its low volatility, has a low melting point for easy dispersion and contains durability for processing, drying and storage. veja menos | |
| Eunox AO-616 | Eutec Chemical Co., Ltd. | Eunox AO-616 is a cream to amber colored powder and a non-discoloring, non-staining antioxidant, containing high activity and low volatility. This product can be used in tackifiers, adhesives and sealants | |
| Eunox AO-626 | Eutec Chemical Co., Ltd. | Eunox AO-626 is a white crystalline powder with a minimum melting point of 160℃ and a 1% acid value. This product can be used processing stabilizer for elastomers and adhesives. For best effect, it is used with hindered phenolic antioxidants. | |
| Eustab HS-700 | Eutec Chemical Co., Ltd. | Eustab HS-700 is a white to off-white crystalline powder and an efficient anti-hydrolysis agent for many polymers. This product is used to protect against wear due to hydrolysis and to prevent reduction of molecular weight. It can be applied to PU system...veja mais Eustab HS-700 is a white to off-white crystalline powder and an efficient anti-hydrolysis agent for many polymers. This product is used to protect against wear due to hydrolysis and to prevent reduction of molecular weight. It can be applied to PU system adhesives. veja menos | |
| Eustab LS-292 | Eutec Chemical Co., Ltd. | Eustab LS-292 is a clear solution slightly yellow viscous liquid and an efficient liquid hindered amine light stabilizer for use in several applications including adhesives, sealants and coatings. This product is commonly used for polyurethanes due to its...veja mais Eustab LS-292 is a clear solution slightly yellow viscous liquid and an efficient liquid hindered amine light stabilizer for use in several applications including adhesives, sealants and coatings. This product is commonly used for polyurethanes due to its solubility in polyols and demonstrates reduced interaction with co-additives such as pigments and other stabilizers. veja menos | |
| Eustab LS-3853 | Eutec Chemical Co., Ltd. | Eustab LS-3853 is a waxy solid and an efficient liquid hindered amine light stabilizer. It is for use in polypropylene, polyethylene, styrenics, unsaturated polyesters, acrylics, vinyl polymers including adhesives, sealants and coatings. | |
| GENORAD* 16 | Rahn AG | GENORAD* 16 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). The product has good solubility in acrylates and methacrylates, and it maintains reactivity and viscosity. Compared to hydroquinone (HQ...veja mais GENORAD* 16 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). The product has good solubility in acrylates and methacrylates, and it maintains reactivity and viscosity. Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 16 has low or no effect on the reactivity of the system. It can be used in offset inks, letterpress inks, screen inks, flexo inks, inkjet and wood applications. veja menos | Request Sample |
| GENORAD* 18 | Rahn AG | GENORAD* 18 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 18 has low or no effect on the reactivity of the sy...veja mais GENORAD* 18 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 18 has low or no effect on the reactivity of the system. This product is typically used in offset inks and varnishes, letterpress inks, screen inks and varnishes, flexo inks and varnishes, paper and board varnishes and wood coatings. veja menos | Request Sample |
| GENORAD* 20 | Rahn AG | GENORAD* 20 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). This product stabilizes viscosity without reducing the cure speed, and its is recommended for clear coating and white and pastel shades...veja mais GENORAD* 20 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). This product stabilizes viscosity without reducing the cure speed, and its is recommended for clear coating and white and pastel shades. The product is very low in color. Specifically, it can be used in offset varnishes, screen varnishes, flexo varnishes, paper and board varnishes and wood coatings. veja menos | Request Sample |
| GENORAD* 21 | Rahn AG | GENORAD* 21 is an in-can stabilizer specially designed for use in UV-curable metallic inks. With its unique chemistry, GENORAD* 21 greatly widens the scope for in-can stabilization of UV metallic inks without effecting cure speed. Compared to hydroquinone...veja mais GENORAD* 21 is an in-can stabilizer specially designed for use in UV-curable metallic inks. With its unique chemistry, GENORAD* 21 greatly widens the scope for in-can stabilization of UV metallic inks without effecting cure speed. Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 21 has low or no effect on the reactivity of the system. veja menos | Request Sample |
| GENORAD* 22 | Rahn AG | GENORAD* 22 is a low viscosity polymerization inhibitor in acrylic monomer. It is an in-can stabilizer for radically curable inks, coatings and adhesives. Compared to hydroquinone (HQ) and hydroquinone monomethyl ether (HQME), GENORAD*.22 has no or very l...veja mais GENORAD* 22 is a low viscosity polymerization inhibitor in acrylic monomer. It is an in-can stabilizer for radically curable inks, coatings and adhesives. Compared to hydroquinone (HQ) and hydroquinone monomethyl ether (HQME), GENORAD*.22 has no or very low effect on the reactivity of the system. This product is recommended for use in printing inks, inkjet inks, wood coatings and low viscosity systems. veja menos | Request Sample |
| GENORAD* 23 | Rahn AG | GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV c...veja mais GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations. veja menos | Request Sample |
| GENORAD* 24 | Rahn AG | GENORAD* 24 is the latest complement to RAHN'S stabilizer product range. GENORAD* 24 is a unique all-purpose in-can stabilizer for UV LED and other (UV cured) free radical inks, coatings and adhesives. | Request Sample |
| GENORAD* 26 | Rahn AG | GENORAD* 26 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). This product can be used in offset inks, screen inks, flexo inks, and wood applications. | Request Sample |
| GENORAD* 40 | Rahn AG | GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varn...veja mais GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varnishes, adhesives and overprint varnishes. It improves adhesion on metal. veja menos | Request Sample |
| Hydroxypropyl Starch Ether | Shandong Yiteng Chemical Limited Liability Company | Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...veja mais Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. veja menos | |
| Nyacol® CeO2 | Nyacol Nano Technology | Nyacol® CeO2 is cerium oxide. This product is designed for use in automotive and other catalyst production. Nyacol® CeO2 is used in glass polishing and coating applications. | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...veja mais Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. veja menos | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...veja mais Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. veja menos | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...veja mais Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. veja menos | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...veja mais Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. veja menos | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...veja mais Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. veja menos | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...veja mais Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. veja menos | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...veja mais Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. veja menos | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...veja mais Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. veja menos | |
| Purstab 78 | SUNNY CHEMICAL CO.,LTD. | Purstab 78 is a polyurethane stabilizer that comes in a slightly yellowish liquid form, is non-toxic and has a low volatility and better compatibility with liquid polymers. It is suitable for use in the processing and aging conditions of polyurethane adhe...veja mais Purstab 78 is a polyurethane stabilizer that comes in a slightly yellowish liquid form, is non-toxic and has a low volatility and better compatibility with liquid polymers. It is suitable for use in the processing and aging conditions of polyurethane adhesives. veja menos | |
| Purstab 85 | SUNNY CHEMICAL CO.,LTD. | Purstab 85 is a polyurethane stabilizer that comes in an orange liquid form, is non-toxic and has a low volatility and better compatibility with liquid polymers. It is suitable for use in hot melt adhesives. | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...veja mais R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. veja menos | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...veja mais R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. veja menos | |
| SONGNOX® 1010 | Songwon International AG | SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effe...veja mais SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effect in combination with SONGNOX® 1680 and other secondary antioxidants. It can also be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use veja menos | |
| SONGNOX® 1035 | Songwon International AG | SONGNOX® 1035 provides both primary and secondary antioxidant protection for organic polymers. It is compatible with a wide range of organic substrates and can be used with a broad range of other stabilizers for optimum performance. It has low volatility ...veja mais SONGNOX® 1035 provides both primary and secondary antioxidant protection for organic polymers. It is compatible with a wide range of organic substrates and can be used with a broad range of other stabilizers for optimum performance. It has low volatility and provides long-term heat stability. veja menos | |
| SONGNOX® 1076 | Songwon International AG | SONGNOX® 1076 is an effective antioxidant for use in polymer processing - reducing viscosity change and gel formation. It provides long term heat stability, protecting physical properties during storage and use of end-product. SONGNOX® 1076 can be used wi...veja mais SONGNOX® 1076 is an effective antioxidant for use in polymer processing - reducing viscosity change and gel formation. It provides long term heat stability, protecting physical properties during storage and use of end-product. SONGNOX® 1076 can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. veja menos | |
| SONGNOX® 117B | Songwon International AG | SONGNOX® 117B blend of SONGNOX® 1076, a primary hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent Melt Flow and Color protection during processing of Polyolefins. SONGNOX® 117B provides long term h...veja mais SONGNOX® 117B blend of SONGNOX® 1076, a primary hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent Melt Flow and Color protection during processing of Polyolefins. SONGNOX® 117B provides long term heat stability - protects physical properties during storage and in the end use application. It is also useful for stabilization of Polycarbonates, ABS, and Polyesters. veja menos | |
| SONGNOX® 11B | Songwon International AG | SONGNOX® 11B is a blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. provides excellent melt flow and color protection during processing of Polyolefins. It provides...veja mais SONGNOX® 11B is a blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. provides excellent melt flow and color protection during processing of Polyolefins. It provides long term heat stability - protects physical properties during storage and in the end use application. SONGNOX® 11B can also useful for stabilization of Polycarbonate, ABS, and Polyesters. veja menos | |
| SONGNOX® 1290 | Songwon International AG | SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polysty...veja mais SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polystyrene, ABS terpolymer, PVC, Polyamides, Polyurethanes, Elastomers, Adhesives, Rubbers such as EPDM, SBS and rubber blends with Polyolefins, and natural and synthetic tackifier resins. veja menos | |
| SONGNOX® 1520 LQ | Songwon International AG | SONGNOX® 1520 LQ is a liquid phenolic antioxidant for organic substrates such as elastomers, plastics, adhesives, sealants, oil and lubricants. It is also effective thermo-oxidative stabilizer of solution polymerized, emulsion polymerized and thermoplasti...veja mais SONGNOX® 1520 LQ is a liquid phenolic antioxidant for organic substrates such as elastomers, plastics, adhesives, sealants, oil and lubricants. It is also effective thermo-oxidative stabilizer of solution polymerized, emulsion polymerized and thermoplastic elastomers. veja menos | |
| SONGNOX® 1680 | Songwon International AG | SONGNOX® 1680 is a secondary antioxidant for organic polymers. Applications include polyolefins, polycarbonate, polyester, and styrenics. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. | |
| SONGNOX® 2450 | Songwon International AG | SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. I...veja mais SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. It is an effective antioxidant for styrenics, synthetic rubbers, POM homo & copolymer, polyurethanes, polyamides, polyesters, MBS and PVC. It can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. veja menos | |
| SONGNOX® 6260 | Songwon International AG | SONGNOX® 6260 is a secondary high performance antioxidant for organic polymers. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. Applications include polyolefins, elastomers, polycarbonate, polyester, and st...veja mais SONGNOX® 6260 is a secondary high performance antioxidant for organic polymers. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. Applications include polyolefins, elastomers, polycarbonate, polyester, and styrenics. veja menos | |
| SONGNOX® DTDTP | Songwon International AG | SONGNOX® DTDTP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DTDTP is an efficient stabilizer for polyolefins, particularly PP and HDPE. | |
| SONGNOX® PQ | Songwon International AG | SONGNOX® PQ is a high performance secondary antioxidant for organic polymers. It is an effective in stabilization of polyolefins, elastomers, engineering plastic and adhesives. PQ has excellent color stability during compounding, fabrication and end-use, ...veja mais SONGNOX® PQ is a high performance secondary antioxidant for organic polymers. It is an effective in stabilization of polyolefins, elastomers, engineering plastic and adhesives. PQ has excellent color stability during compounding, fabrication and end-use, and improvement in the light stability. It is highly effective processing stabilizer and excellent discoloration inhibitor for organic polymers. veja menos |
