| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| AQUACER 8075 | Univar Solutions | AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio o...もっと表示する AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8075 is compatible with all known polymer dispersions and plasticizers. 表示を減らす | Request Sample |
| EBECRYL® 11 | Allnex | EBECRYL® 11 is a polyethylene glycol diacrylate derivative. Ebecryl®11, being 100% water soluble, is designed for use in applications needing this type of solubility. | Request Sample |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...もっと表示する FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. 表示を減らす | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...もっと表示する FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. 表示を減らす | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...もっと表示する FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. 表示を減らす | |
| Flexonic™ 37 A | Lawter | Flexonic™ 37 A is a nonionic, high-density polyethylene wax emulsion that functions as an additive in coatings and water-based inks where rub resistance, slip and block resistance and/or hardness are required. It can be used as an additive in wood, metal ...もっと表示する Flexonic™ 37 A is a nonionic, high-density polyethylene wax emulsion that functions as an additive in coatings and water-based inks where rub resistance, slip and block resistance and/or hardness are required. It can be used as an additive in wood, metal and paper coatings and in overprint varnishes where hardness and slip are needed, without much degradation of gloss. 表示を減らす | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...もっと表示する HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. 表示を減らす | |
| Optirub™ OP A | Lawter | Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems an...もっと表示する Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax flotation and defoamer interactions. Optirub™ OP A is used in flexographic and packaging gravure inks as well as publication gravure inks and aqueous overprint varnishes. 表示を減らす | |
| Optirub™ PC A | Lawter | Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC ...もっと表示する Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC A is suitable for use in flexographic and gravure inks, in heatset and sheet-fed inks and in UV metal deco inks. 表示を減らす | |
| Optirub™ SP1 A | Lawter | Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single c...もっと表示する Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single component system. OptiruB™ SP1 A is used in flexographic and gravure inks and in heatset, sheet-fed, UV and metal decorating inks. 表示を減らす | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...もっと表示する SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 表示を減らす | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...もっと表示する SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 表示を減らす | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...もっと表示する SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 表示を減らす | |
| Stirinol™ 350 A | Lawter | Stirinol™ 350 A is a coatable polyethylene and PTFE heatset compound to give good gloss retention, rub resistance and slip in heatset inks. It resists re-crystallization at ink-processing temperature. Stirinol™ 350 A is suitable for use in heatset inks. | |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...もっと表示する Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. 表示を減らす | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...もっと表示する Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. 表示を減らす | |
| Ultrapoly™ 211 A | Lawter | Ultrapoly™ 211 A is a sheet-fed polyethylene and PTFE compound blend dispersed in a hard drying binder and is recommended in instances where heat resistance, abrasion and a high degree of slip are required. It is fast setting and non-volatile and protects...もっと表示する Ultrapoly™ 211 A is a sheet-fed polyethylene and PTFE compound blend dispersed in a hard drying binder and is recommended in instances where heat resistance, abrasion and a high degree of slip are required. It is fast setting and non-volatile and protects film in the earliest phases of the printing process. Ultrapoly™ 211 A is suitable for use in sheet-fed offset inks and in UV, OPV inks. 表示を減らす | |
| Ultrapoly™ 213 A | Lawter | Ultrapoly™ 213 A is a sheet-fed polyethylene and PTFE compound that is dispersed in a non-volatile, hard-drying binder. It boasts gloss retention and lubricity, with abrasion and mar resistance as added features. Ultrapoly™ 213 A can be used in sheet-fed ...もっと表示する Ultrapoly™ 213 A is a sheet-fed polyethylene and PTFE compound that is dispersed in a non-volatile, hard-drying binder. It boasts gloss retention and lubricity, with abrasion and mar resistance as added features. Ultrapoly™ 213 A can be used in sheet-fed and heatset inks, in UV and metal decorating inks. 表示を減らす | |
| Ultrapoly™ 215 A | Lawter | Ultrapoly™ 215 A is a blend of sheet-fed polyethylene and PTFE compounds in instances where a high degree of lubricity is called for and where mar, heat and abrasion resistance are also necessary. It is fast-setting and non-volatile and protects the film ...もっと表示する Ultrapoly™ 215 A is a blend of sheet-fed polyethylene and PTFE compounds in instances where a high degree of lubricity is called for and where mar, heat and abrasion resistance are also necessary. It is fast-setting and non-volatile and protects the film in the earliest phase of the printing cycle. Ultrapoly™ 215 A can be used in sheet-fed offset inks and metal decorating inks. 表示を減らす | |
| Ultrapoly™ 2300 A | Lawter | Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip a...もっと表示する Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip are needed. The product is fast-setting and non-volatile and protects film in the earliest phase of printing while developing toughness over time. Ultrapoly™ 2300 A is considered ideal for use in sheet-fed offset inks and in UV and OPV metal decorating inks. 表示を減らす |
