| 4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...もっと表示する 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. 表示を減らす | Request Sample |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...もっと表示する Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 表示を減らす | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDITOL® VXW 4934 | Allnex | ADDITOL® VXW 4934 is an additive for water-dilutable paints for the prevention of pigment settling, for the improvement of edge crawling at dipping application and for increase of sagging limit at spray application. | Request Sample |
| ADDITOL® VXW 6360 | Allnex | ADDITOL® VXW 6360 is a polyurethane thickener for air-drying, aqueous coating systems. It has excellent rheologic properties, resulting in improved flow and leveling, film-build and brushability. | Request Sample |
| ADDITOL® VXW 6388 | Allnex | ADDITOL® VXW 6388 -rheology additive - is a polyurethane thickener for air-drying, aqueous coating systems. It is used for thickening and modification of flow properties of waterborne paints in the middle shear area e.g. gloss paints, dispersion paints an...もっと表示する ADDITOL® VXW 6388 -rheology additive - is a polyurethane thickener for air-drying, aqueous coating systems. It is used for thickening and modification of flow properties of waterborne paints in the middle shear area e.g. gloss paints, dispersion paints and anti-corrosive paints. 表示を減らす | Request Sample |
| ADDITOL® XL 280 | Allnex | ADDITOL® XL 280 is a modified montmorrilonite clay rheology control/thickener additive. | Request Sample |
| ADDITOL® XL 6557 | Allnex | Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gl...もっと表示する Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gloss, good drying properties, and good water/weather resistance. It is recommended for solvent-borne industrial applications, such as coil coatings, marine and heavy duty anti-corrosive paints, agriculture, industrial wood, and other metal coatings. 表示を減らす | Request Sample |
| AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
| AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 is a special, structured, highly filled dispersion of hydrophobic AEROSIL® fumed silica. It can be used for rheology control, anti-settling, pigment stabilization and improves the mechanical properties. | Request Sample |
| AEROSIL® 200 | DKSH | AEROSIL® 200 hydrophilic fumed silica, surface area 200m2/g. Widely usable in a broad range of applications. | Request Sample |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking chara...もっと表示する AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica' and holds a COSMOS certification. 表示を減らす | Request Sample |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of ap...もっと表示する AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. 表示を減らす | Request Sample |
| AEROSIL® 380 | DKSH | AEROSIL® 380 is a hydrophilic fumed silica, with a surface area of 380m2/g. | Request Sample |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and a...もっと表示する AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. 表示を減らす | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...もっと表示する AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. 表示を減らす | Request Sample |
| AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
| AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
| AEROSIL® R 202 | DKSH | AEROSIL® R 202 hydrophobic fumed silica surface-treated with polydimethylsiloxane. | Request Sample |
| AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 202 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 202 helps with the thickening and thixotropy of complex polar liquids based ...もっと表示する AEROSIL® R 202 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 202 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. 表示を減らす | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...もっと表示する AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. 表示を減らす | Request Sample |
| AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 805 is a fumed silica aftertreated with an octylsilane based on AEROSIL® 200. AEROSIL® R 805 has effective rheology control in complex liquid sytems. It also can be applied in coatings systems as an anti-settling agent, for the stabilization of...もっと表示する AEROSIL® R 805 is a fumed silica aftertreated with an octylsilane based on AEROSIL® 200. AEROSIL® R 805 has effective rheology control in complex liquid sytems. It also can be applied in coatings systems as an anti-settling agent, for the stabilization of pigments, and to enhance the effect of corrosion protection, which makes it interesting for nail polish. In the personal care industry the AEROSIL® R 805 can be used as a rheology controller and stabilization aid in every kind of deodorants like sprays, roll-on and sticks. Its INCI-name is 'Silica caprylyl silylate' 表示を減らす | Request Sample |
| AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be use...もっと表示する AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be used as a free flow agent and rheology controller. It is well known in products like styling agents (dry water) and dry shampoos. Using AEROSIL® R 812 S is also recommended for sprays (e.g. antiperspirant) and powder-to-cream applications (e.g. lipsticks). Its INCI-name is 'Silica silylate' 表示を減らす | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed...もっと表示する AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed dry feel. AEROSIL® R 816 is PCPC-listed as 'Silica cetyl silylate'. 表示を減らす | Request Sample |
| AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
| AEROSIL® R 972 | DKSH | AEROSIL® R 972 is a hydrophobic fumed silica after being treated with DDS (dimethyldichlorosilane). It is easy to disperse and suitable for a broad range of applications. | Request Sample |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 h...もっと表示する AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 has rheology control of complex liquid systems and is water resistant, hydrophobising of liquid systems. It is used in coatings as an anti-settling agent, for pigment stabilization and improvement of corrosion protection. 表示を減らす | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AERO...もっと表示する AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AEROSIL® R 974 to enrich at water and oil interfaces and thereby stabilize water droplets in a continuous oil phase by the Pickering effect. AEROSIL® R 974 is PCPC-listed as 'Silica dimethyl silylate'. The product is also very suitable for rheology control as well as an oil thickener. 表示を減らす | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...もっと表示する AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. 表示を減らす | Request Sample |
| AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...もっと表示する AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. 表示を減らす | |
| AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...もっと表示する AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. 表示を減らす | |
| AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...もっと表示する AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. 表示を減らす | |
| BENTONE® 120 | DKSH | BENTONE® 120 is a rheological additive for low to intermediate polarity systems. | Request Sample |
| BENTONE® 27 | DKSH | BENTONE® 27 is a conventional hectorite-based organoclay for high polarity systems, polyol, epoxy, etc. | Request Sample |
| BENTONE® 34 | Elementis | BENTONE® 34 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
| BENTONE® 38 | DKSH | BENTONE® 38 is a rheological additive designed for low to intermediate-polarity organic systems. | Request Sample |
| BENTONE® 38 | Elementis | BENTONE® 38 rheological additive is a modified hectorite organoclay. This rheology modifier is advised for medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
| BENTONE® 54 | DKSH | BENTONE® 54 is a conventional organoclay for low to intermediate-polarity organic systems. | Request Sample |
| BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...もっと表示する BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. 表示を減らす | |
| BENTONE® EW | Elementis | BENTONE® EW rheological additive is a refined and benificiated hectorite clay based thickener for waterborne paint and aqueous coating systems. This rheology modifier has outstanding sag and suspension control and can be incorporated in the pre-gel. | |
| BENTONE SD®-1 | Elementis | BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the pai...もっと表示する BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the paint manufacturing process and can be used for post-correction. 表示を減らす | |
| BENTONE SD®-2 | Elementis | BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents...もっと表示する BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. 表示を減らす | |
| BK-127 | LUKEM D.O.O. | BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...もっと表示する BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. 表示を減らす | |
| BK-883 | LUKEM D.O.O. | BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...もっと表示する BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. 表示を減らす | |
| BK–884A | LUKEM D.O.O. | BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives...もっと表示する BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives, varnishes, inks, nitro lacquer, and sealants. 表示を減らす | |
| BK-923 | LUKEM D.O.O. | BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is ...もっと表示する BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is also used in inks, adhesives, putties, sealants, varnishes, and nitro lacquer. 表示を減らす | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...もっと表示する CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. 表示を減らす | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...もっと表示する CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. 表示を減らす | |
| CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...もっと表示する CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. 表示を減らす | |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...もっと表示する CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. 表示を減らす | |
| CLAYTONE® 40 | BYK | CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achiev...もっと表示する CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary. 表示を減らす | |
| CLAYTONE® AF | BYK | CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a hig...もっと表示する CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. CLAYTONE® AF is self dispersing and does not require a polar activator. CLAYTONE® AF eliminates the need for high shear or pregels. 表示を減らす | |
| CLAYTONE® APA | BYK | CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and ...もっと表示する CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. 表示を減らす | |
| CLAYTONE® HY | BYK | CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting ...もっと表示する CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting and allows the ink manufacturer to control tack viscosity. 表示を減らす | |
| CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. | |
| CLAYTONE-EM | BYK | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-ER | BYK | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-IMG 400 | BYK | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-MPZ | BYK | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally su...もっと表示する CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. 表示を減らす | |
| CLAYTONE-SF | BYK | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE®-VZ | BYK | CLAYTONE®-VZ is a rheology additive in powder form based on an organophilic phyllosilicate especially for polar as well as for medium-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE®-VZ is ideally ...もっと表示する CLAYTONE®-VZ is a rheology additive in powder form based on an organophilic phyllosilicate especially for polar as well as for medium-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE®-VZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. Using the additive produces thixotropic flow behavior, and therefore results in significant improvement to the anti-sagging properties while at the same time maintaining good leveling. This also optimizes storage stability, and prevents pigments and fillers from settling. 表示を減らす | |
| DA-40A | Antex Chemicals (Zhongshan) Limited | DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| DA-40N | Antex Chemicals (Zhongshan) Limited | DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...もっと表示する Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 表示を減らす | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...もっと表示する Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 表示を減らす | |
| DISPERBYK®-2013 | BYK | DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excel...もっと表示する DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excellent stabilization, in particular in 100% UV systems and particularly of organic pigments and carbon black pigments. In so doing, this product has an impressive, effective viscosity-reducing effect, simultaneously reducing thixotropic flow behavior. 表示を減らす | |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) | Eastman Chemical B.V. | A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will...もっと表示する A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder. 表示を減らす | |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-553-0.4) | Eastman Chemical B.V. | Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is rea...もっと表示する Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is reactive and may be crosslinked with ureaformaldehydes, melamines, and polyisocyantes. Films of CAB-553-0.4 are colorless and have good ultraviolet stability, maintaining their low color over long periods of time. 表示を減らす | |
| EASTMAN CELLULOSE ACETATE (CA-398-3) | Eastman Chemical B.V. | One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solv...もっと表示する One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solvents, plasticizers, and other modifying resins to formulate coatings for paper, glass, plastic, wire screen, and electrical wiring. 表示を減らす | |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-482-0.5) | Eastman Chemical B.V. | A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed ...もっと表示する A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed from Eastman CAP-482-0.5 have fast solvent release, excellent antiblocking properties, and grease resistance superior to that of other film-formers. 表示を減らす | |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | Eastman Chemical B.V. | A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV li...もっと表示する A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. 表示を減らす | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...もっと表示する Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 表示を減らす | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...もっと表示する Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 表示を減らす | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...もっと表示する Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 表示を減らす | |
| Hakuenka® CCR-S10 | Shiraishi-Omya GmbH | Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...もっと表示する Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. 表示を減らす | |
| HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...もっと表示する HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. 表示を減らす | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...もっと表示する HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. 表示を減らす | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...もっと表示する HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. 表示を減らす | |
| HDK® H20 | Wacker Chemie AG | HDK® H20 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. It can be appl...もっと表示する HDK® H20 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. It can be applied in adhesives, coatings, printing inks, skin care, decorative cosmetics and more. 表示を減らす | |
| HDK® T30 | Wacker Chemie AG | HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, pr...もっと表示する HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. 表示を減らす | |
| HDK® T40 | Wacker Chemie AG | HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickenin...もっと表示する HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. 表示を減らす | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...もっと表示する HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 表示を減らす | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...もっと表示する HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 表示を減らす | |
| HL-380 | DKSH | HL-380 is and hydrophilic fumed silica. Reinforcing filler for elastomers. Anti-settling anti-sagging and thickening agent. Rheology control and thixotropic agent. Free flow aid and anti-caking aid for powders.High transparency. | Request Sample |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...もっと表示する HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 表示を減らす | |
| HS971 | Tianyi Chemical Engineering Material Co., Ltd. | HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...もっと表示する HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 表示を減らす | |
| HS973 | Tianyi Chemical Engineering Material Co., Ltd. | HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...もっと表示する HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 表示を減らす | |
| HS975 | Tianyi Chemical Engineering Material Co., Ltd. | HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...もっと表示する HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 表示を減らす | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Indunal S 2230 HPL | Indulor Chemie GmbH | Indunal S 2230 HPL is a water based resin technology for high performance pigment dispersions, solubilised with ammonia. It has excellent transfer and gloss, high color strength at lower pigment dosage, and high pigment to binder ratio with low viscosity....もっと表示する Indunal S 2230 HPL is a water based resin technology for high performance pigment dispersions, solubilised with ammonia. It has excellent transfer and gloss, high color strength at lower pigment dosage, and high pigment to binder ratio with low viscosity. Indunal S 2230 HPL is used in printing inks and overprint varnishes. 表示を減らす | |
| Indunal T 122 | Indulor Chemie GmbH | Indunal T 122 is an emulsion polymer based on acrylates that is carboxylated and APEO-free. It is a thickener and can be combined with Induprint PAC 504 for the production of low-cost printing inks. Indunal T 122 is used in paints, plasters, water-based p...もっと表示する Indunal T 122 is an emulsion polymer based on acrylates that is carboxylated and APEO-free. It is a thickener and can be combined with Induprint PAC 504 for the production of low-cost printing inks. Indunal T 122 is used in paints, plasters, water-based printing inks, overprint varnishes, wood lacquers, base coatings on fiberboard, adhesives, paper coatings, and other water-based systems. 表示を減らす | |
| Indunal T 1420 | Indulor Chemie GmbH | Indunal T 1420 is a terpolymeric carboxylated acrylic emulsion. It is a thickener and has excellent resolubility, very good transfer, and very high hydrosol viscosity. Indunal T 1420 is used in emulsion paints, water-based printing inks, plasters, and ove...もっと表示する Indunal T 1420 is a terpolymeric carboxylated acrylic emulsion. It is a thickener and has excellent resolubility, very good transfer, and very high hydrosol viscosity. Indunal T 1420 is used in emulsion paints, water-based printing inks, plasters, and overprint varnishes. 表示を減らす | |
| Indunal T 147 | Indulor Chemie GmbH | Indunal T 147 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener and has excellent thixotropic thickening effect, excellent water retention value, and stabilizes pigments and fillers. Indunal T 147 is used in emulsion paints...もっと表示する Indunal T 147 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener and has excellent thixotropic thickening effect, excellent water retention value, and stabilizes pigments and fillers. Indunal T 147 is used in emulsion paints, plasters, wood lacquers and stains, adhesives, paper coatings, and textile coatings. 表示を減らす | |
| Indunal T 256 | Indulor Chemie GmbH | Indunal T 256 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener, rheology additive, and stabilizes pigments and fillers. Indunal T 256 is used in printing inks, emulsion paints and plasters, wood lacquers and stains, adhesi...もっと表示する Indunal T 256 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener, rheology additive, and stabilizes pigments and fillers. Indunal T 256 is used in printing inks, emulsion paints and plasters, wood lacquers and stains, adhesives, paper coatings, and textile coatings. 表示を減らす | |
| LAPONITE® RD | BYK | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...もっと表示する LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. 表示を減らす | |
| LAPONITE® RDS | BYK | LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will r...もっと表示する LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products. 表示を減らす |
