| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...view more ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. view less |  |
| Attrition Mill | Munson Machinery Co., Inc. | Attrition Mill produces particles within a relatively narrow particle size spectrum, from granular (10 to 200 mesh). It is employed primarily for reduction of fibrous materials, but is also suitable for friable products. It is available in three sizes wit...view more Attrition Mill produces particles within a relatively narrow particle size spectrum, from granular (10 to 200 mesh). It is employed primarily for reduction of fibrous materials, but is also suitable for friable products. It is available in three sizes with single- or dual (counter-rotating) powered discs, and extensive selection of plate designs for optimum performance. In addition to general process applications, Munson Attrition Mills are utilized for conditioning of materials prior to packaging. view less |  |
| Automated Discharge Systems | Charles Ross & Son Company | A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...view more A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. view less |  |
| CAMSIZER® - Dynamic Image Analysis System Particle Size | HORIBA Instruments, Inc. | CAMSIZER® features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. 100% higher resolution. It has a new LED-stroboscope light source ...view more CAMSIZER® features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. 100% higher resolution. It has a new LED-stroboscope light source with 20 times higher intensity. It provides extreme depth of sharpness and improved shape and size analysis across the entire measuring range. CAMSIZER® has an optimized, process oriented software, excellent compatibility to sieve analysis it is easy to reproduce and there are several language versions.Typical examples of applications for CAMSIZER® are: Salt/sugar, Sand, Polystyrene, Plastics, Carbon black/coal, Glass/ceramics, Catalysts, Coffee, Fertilisers, Abrasives, Refractory products, Drugs, Carbon products, Foodstuffs and Metal powder. view less |  |
| CAMSIZER XT - Dynamic Image Analysis System Particle Size | HORIBA Instruments, Inc. | CAMSIZER XT features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and wet dispersions in the size range from 1µm to 3mm. It performs high resolution for narrow, mono-modal distributions...view more CAMSIZER XT features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and wet dispersions in the size range from 1µm to 3mm. It performs high resolution for narrow, mono-modal distributions, excellent dynamic measurement range for broad distributions or multi-modal samples and reliable detection of smallest amounts (< 0.1 %) of “oversize” particles. It also performs particle shape analysis (e. g. aspect ratio, symmetry or roundness for detection of agglomerates, broken particles or contaminations). CAMSIZER XT is ideal for granules and fine pellets, pulverized and granulated food, detergent powder and raw materials, plastic powders (also with electrostatic charge) metal and ore powders, abrasives (medium-sized and small grit), fine sands and cement, fine wood fibers and fine plastic fibers view less |  |
| Cenomic™ 1 | Bühler AG | Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...view more Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. view less |  |
| Cenomic™ 15 | Bühler AG | Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler ...view more Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. view less |  |
| Cenomic™ 3 | Bühler AG | Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...view more Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. view less |  |
| Cenomic™ 6 | Bühler AG | Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...view more Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. view less |  |
| Centrifugal Impact Mills | Munson Machinery Co., Inc. | Centrifugal Impact Mill ("CIM" or "Pin Mill") provides a simple, inexpensive means of grinding, sizing, de-agglomerating and homogenizing material, and can be employed as an effective infestation destroyer. It yields particle sizes down to 325 mesh and pr...view more Centrifugal Impact Mill ("CIM" or "Pin Mill") provides a simple, inexpensive means of grinding, sizing, de-agglomerating and homogenizing material, and can be employed as an effective infestation destroyer. It yields particle sizes down to 325 mesh and primarily used for friable materials. Available in #304 stainless steel, sanitary, abrasive resistant and standard carbon steel design, Centrifugal Impact Mill operates without screens, hammers, knives or rolls. view less |  |
| CX Heavy Duty Cutter | Munson Machinery Co., Inc. | CX Heavy Duty Cutter is a single-rotor high torque cutter/hog with a positive, high profile raking action (unlike a shredder) for primary size reduction of large, bulky materials that typically would not fit into an SCC screen classifying cutter and/or re...view more CX Heavy Duty Cutter is a single-rotor high torque cutter/hog with a positive, high profile raking action (unlike a shredder) for primary size reduction of large, bulky materials that typically would not fit into an SCC screen classifying cutter and/or require greater torque than other cutters provide. The CX Heavy Duty Cutter delivers high horsepower at low speeds to produce tremendous torque for seemingly effortless reduction of high density, high tensile bulk materials up to 36" in size. view less |  |
| Cylindrical Plow Blenders | Munson Machinery Co., Inc. | Munson Cylindrical Plow Blenders consist of a cylindrical vessel and a mixing shaft that rotates about 4-times faster. The vessel is typically filled to 60 percent of capacity that, together with fast rotation of the mixing shaft, serves to fluidize the m...view more Munson Cylindrical Plow Blenders consist of a cylindrical vessel and a mixing shaft that rotates about 4-times faster. The vessel is typically filled to 60 percent of capacity that, together with fast rotation of the mixing shaft, serves to fluidize the material and fill the entire mixing vessel with airborne material, maximizing material transfer rates while minimizing impact and degradation. view less |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available. |  |
| DT-1201 - Acoustic & Electroacoustic Spectrometer For Particle Size Analysis And Zeta Potential | HORIBA Instruments, Inc. | DT-1201 - Acoustic & Electroacoustic Spectrometer uses acoustic and electroacoustic spectrometry to measure both particle size and zeta potential in very concentrated suspensions (up to 50 vol%) over a size range of 5nm-100µm. Acoustic measurements provid...view more DT-1201 - Acoustic & Electroacoustic Spectrometer uses acoustic and electroacoustic spectrometry to measure both particle size and zeta potential in very concentrated suspensions (up to 50 vol%) over a size range of 5nm-100µm. Acoustic measurements provide a wealth of information beyond particle size and zeta potential. For well developed applications, acoustic parameters can be correlated to other product variables. It's advantages over light based techniques include: no dilution needed the sample is measured in native state, it is much less sensitive to contamination, there is no calibration needed, higher precision and wide size range from 5nm to 100 microns. DT-1201 measures sound attenuation and velocity of any fluid like material, gels and milk, for example. view less |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less |  |
| Hammer Mills | Munson Machinery Co., Inc. | Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mil...view more Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mills have an extra quarter screen located in the hinged section of the top case, increasing screen area by approximately 50% over that of conventional designs, for a total of 270°. view less |  |
| Hauschild SpeedMixer® Brochure | Hauschild GmbH & Co. KG | Since 1974 Hauschild GmbH & Co. KG has been providing innovative mixing solutions worldwide for a wide range of applications. Hauschild SpeedMixer® is the most widely used equipment in laboratories when mixing is a critical part of the R&D process. |  |
| Hauschild SpeedMixer® DAC 150.1 / DAC 250.1 | Hauschild GmbH & Co. KG | The DAC 150.1 and DAC 250.1 are the first generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)] |  |
| Hauschild SpeedMixer® DAC 150.3 / DAC 250.3 | Hauschild GmbH & Co. KG | The DAC 150.3 and DAC 250.3 are the last generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)] |  |
| Hauschild SpeedMixer® DAC 150SP / DAC 250SP | Hauschild GmbH & Co. KG | DAC 150 SP and DAC 250 SP are small machine which allow for programming different speeds within the mixing time window. |  |
| Hauschild SpeedMixer® DAC 3000 / 5000 / 10000 HP | Hauschild GmbH & Co. KG | Large machines offer the possibility to mix larger batches (up to 10 kg = 22 lb) and are suitable to run small production lots. |  |
| Hauschild SpeedMixer® DAC 3000 / 5000 VAC-P | Hauschild GmbH & Co. KG | Large machines can be provided with a vacuum feature to achieve a very homogeneous and completely air bubble-free mixture. |  |
| Hauschild SpeedMixer® DAC 400.1 / 1100.1 | Hauschild GmbH & Co. KG | Machines in the medium range are capable of mixing materials compounds with nominal gross weight between 400g (.88lb) and 1.1Kg (2.42 lb). |  |
| Hauschild SpeedMixer® DAC 400.1 / 800.1 LR | Hauschild GmbH & Co. KG | Machines in the medium range are available in a LR (long radius) configuration, generally better for mixing materials with low specific weight . |  |
| Hauschild SpeedMixer® DAC 400.2 / 1100.2 VAC-P | Hauschild GmbH & Co. KG | Medium range machines can be provided with a vacuum feature, which allows to achieve a very homogeneous and completely air bubble-free mixture [nominal gross weight between 400g (.88lb) and 1.1Kg (2.42 lb)] |  |
| Hauschild SpeedMixer® DAC 400.2 / 800.2 VAC-P LR | Hauschild GmbH & Co. KG | 8. Medium range machines with vacuum can be provided with LR (long radius) configuration. |  |
| High Intensity Continuous Blenders | Munson Machinery Co., Inc. | The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of li...view more The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of liquids, which can also serve to dedust and/or agglomerate dry materials. view less |  |
| High Shear Mixer | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...view more All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. view less |  |
| High Speed Disperser | Charles Ross & Son Company | Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic ...view more Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic lift system with hand/foot controls; and stainless steel wetted parts and shaft guard. Sizes range from 1/2 HP to 200 HP to handle batches from 1 to 2000 gallons. Custom designs are also available. view less |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...view more High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. view less |  |
| LA-300 - Portable Routine Laser Diffraction Analyzer | HORIBA Instruments, Inc. | The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-30...view more The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-300's revolutionary size makes it a welcome change to the other large and cumbersome designs. It's real-time displays of particle size distribution and sample concentration let the user check sample at all times. Using a diode laser, the LA-300 measures particles ranging anywhere between 0.1 and 600 μm in diameter with unprecedented precision, and processes high-resolution data for display within 20 seconds. The wide measurable range makes it ideal for application in fundamental studies and quality control of production lines in such diverse fields as pharmaceuticals, fine ceramics, metal powders, polymers, pigments, paints/coatings, adhesives, catalysts, minerals and clays, just to name a few. view less |  |
| LA-950 - High Performance Laser Diffraction Analyzer | HORIBA Instruments, Inc. | LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different in...view more LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different industries. From ultra-fine nano-order particles to individually visible particles, all can be measured with this single instrument. Designed to handle the entire range of applications extending from the complex needs of research to routine quality control procedures, the LA-950 offers practicality as a"standard instrument" that is easy to use and enables precise measurement. LA-950 has a wide range of applications including: nano-level research and development, ceramics, pigments, battery materials, catalysts, cosmetics, pharmaceuticals and food products. view less |  |
| Lab Analysis Services | Univar Solutions Lab Services | Take advantage today of our product performance and analytical testing capabilities from our application and formulation experts. A newly built and custom designed Analytical Laboratory in Houston, Texas enhances Univar Solutions (formerly Nexeo Lab Servi...view more Take advantage today of our product performance and analytical testing capabilities from our application and formulation experts. A newly built and custom designed Analytical Laboratory in Houston, Texas enhances Univar Solutions (formerly Nexeo Lab Services) offering for product testing services. Univar Solutions has designed a state-of-the-art chemical analysis and product testing lab that is now able to service a variety of industries and applications. view less | |
| Laboratory Mini-Cutters | Munson Machinery Co., Inc. | Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same ma...view more Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same materials and offer similar size reduction characteristics but at lower capacities. Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. view less |  |
| Large Block Shredders | Munson Machinery Co., Inc. | The "Maxum 30" shredder from Munson reduces large blocks and bails of material into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips able to shred a broad ...view more The "Maxum 30" shredder from Munson reduces large blocks and bails of material into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips able to shred a broad variety of materials, including the most difficult-to-shred products. The conical tips have an interference fit into receiver slots for rapid replacement. view less |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...view more Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. view less |  |
| Lubricants & Metalworking Lab Services | Univar Solutions Lab Services | At Univar Solutions, our experts in lubricants and metalworking fluids understand the tolerances and requirements necessary to help ensure your products are optimized. We aim to enhance your custom formulations to grow your business. Services include form...view more At Univar Solutions, our experts in lubricants and metalworking fluids understand the tolerances and requirements necessary to help ensure your products are optimized. We aim to enhance your custom formulations to grow your business. Services include formulation development and comparative performance testing. view less | |
| LUBRICATION SYSTEMS MC781 PULSED | Nordson EFD | The MC781 system is designed for applications where pulsed lubrication or thicker lubricants are required. |  |
| LUBRICATION SYSTEMS MC800 CONTINUOUS | Nordson EFD | The MC800 Series system operates up to eight valves. Precision flow controls permit the amount of lubricant applied by each valve to be adjusted independently. Valves can be mounted above or below the stock |  |
| MacroMedia™ | Bühler AG | MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform prop...view more MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform properties achieved for the pre-ground intermediate products. This produces optimum results in fine grinding and consequently increases the quality of the end product. At the same time, the system reduces production costs due to an improved material yield and optimized energy efficiency compared with other pre-grinding solutions. view less |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...view more MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. view less |  |
| MicroMedia™ L | Bühler AG | MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMe...view more MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less |  |
| MicroMedia™ L-C | Bühler AG | MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micro...view more MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less |  |
| MicroMedia™ P1-C | Bühler AG | MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...view more MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less |  |
| MicroMedia™ P2-C | Bühler AG | MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...view more MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less |  |
| MicroMedia™ X1 | Bühler AG | MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...view more MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less |  |
| MicroMedia™ X2 | Bühler AG | MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...view more MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less |  |
| MicroMedia™ X3 | Bühler AG | MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...view more MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less |  |
| MicroMedia™ X4 | Bühler AG | MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...view more MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less |  |
| Mini-Mixers | Munson Machinery Co., Inc. | Mini-Mixers offer the same features as the full-scale Rotary Batch Mixer. Six models with maximum capacities of 0.25 to 15 cu-ft.This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant a...view more Mini-Mixers offer the same features as the full-scale Rotary Batch Mixer. Six models with maximum capacities of 0.25 to 15 cu-ft.This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant and small production applications, including pre-blends. for laboratories, pilot plants and small production runs including pre-blends. view less |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion an...view more We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion and mixing applications. view less |  |
| Nested - Open Head Pail | Cleveland Steel Container Corporation | Nested - Open Head Pail has a tapered body design that allows pails to be nested to maximize storage space and freight costs. It it the most versatile and durable design for a wide range of products. | |
| Planetary Dispersers | Charles Ross & Son Company | The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials ...view more The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials directly into the high shear zone of the orbiting high speed disperser. This combination of unique mixing actions eliminate the need for multiple mixers i.e. 2 technologies in one machine. view less |  |
| PML 2 | Bühler AG | The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...view more The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. view less |  |
| Powder Induction | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...view more All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. view less |  |
| PreMax | Charles Ross & Son Company | This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produ...view more This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produce an intense combination of mechanical, hydraulic and cavitational shear, which results in aggressive deagglomeration. view less |  |
| PSA300 - Static Image Analysis System Particle Size | HORIBA Instruments, Inc. | PSA300 - Static Image Analysis System Particle Size is a state of the art turn-key image analysis solution. Seamless integration of Clemex's powerful particle characterization software and an automated microscope with high resolution camera creates an int...view more PSA300 - Static Image Analysis System Particle Size is a state of the art turn-key image analysis solution. Seamless integration of Clemex's powerful particle characterization software and an automated microscope with high resolution camera creates an intuitive, easy-to-use imaging workstation. Analysis of numerous samples from the same batch guarantees significant statistical measurements. Clemex/Horiba PSA300 is the only image analysis system that offers this advantage. Using the microscopy solution allows to: measure different-sized particles in the same run; measure and isolate particles on the basis of shape, color, size and texture; automatically validate the accuracy and precision of measurements; scan large or small areas of one or many samples; customize reports and meet compliance. PSA300 can measure fine and ultra-fine micronized particles of many types of powdered materials. view less |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...view more RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. view less |  |
| Rheolaser™ Crystal | Formulaction Inc. | A new device from Formulaction, the Rheolaser™ Crystal measures the microstructure evolution of samples by detecting phase transitions and molecular movements under thermal ramping conditions. Diffusing Wave Spectroscopy is utilized to detect melting, cry...view more A new device from Formulaction, the Rheolaser™ Crystal measures the microstructure evolution of samples by detecting phase transitions and molecular movements under thermal ramping conditions. Diffusing Wave Spectroscopy is utilized to detect melting, crystallization and polymorphic transitions in bulk samples with the click of a button. This thermal analysis technique excels when measuring samples with delicate microstructures or in cases where typical thermal analysis techniques fail. view less |  |
| Rheolaser™ Master | Formulaction Inc. | The Rheolaser™ Master uses Diffusing Wave Spectroscopy in order to characterize the viscoelastic nature of concentrated samples in a native state. This non-invasive technique can allow for the determination of viscosity and elasticity profiles as well as ...view more The Rheolaser™ Master uses Diffusing Wave Spectroscopy in order to characterize the viscoelastic nature of concentrated samples in a native state. This non-invasive technique can allow for the determination of viscosity and elasticity profiles as well as accurate gel point determination. view less |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...view more RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. view less |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon Blenders are ideal for powder blending applications. The dual action ribbon agitator creates an intimate blend in a short cycle time. Ross stocks Ribbon Blenders in many sizes from 1 - 100 cu.ft. working capacity. |  |
| Ribbon, Paddle Blenders, & Plow Blenders | Munson Machinery Co., Inc. | Munson has been manufacturing high performance ribbon blenders, paddle blenders and plow blenders since 1960, and has most likely solved a horizontal blending problem precisely like yours numerous times. SERIES HD Heavy Duty for materials up to 70 lbs/cu ...view more Munson has been manufacturing high performance ribbon blenders, paddle blenders and plow blenders since 1960, and has most likely solved a horizontal blending problem precisely like yours numerous times. SERIES HD Heavy Duty for materials up to 70 lbs/cu ft. SERIES XHD Extra Heavy Duty For materials heavier than 70 lbs/cu-ft. view less |  |
| Rotary Batch Dryers/Coolers | Munson Machinery Co., Inc. | Munson Rotary Batch Equipment is highly effective for drying, cooling or moisturizing of bulk solid materials, independent of or in combination with, blending operations. Rotary machines can be configured for "direct" drying, cooling or moisturizing, or "...view more Munson Rotary Batch Equipment is highly effective for drying, cooling or moisturizing of bulk solid materials, independent of or in combination with, blending operations. Rotary machines can be configured for "direct" drying, cooling or moisturizing, or "indirect" drying or cooling. view less |  |
| Rotary Batch Mixers | Munson Machinery Co., Inc. | The Munson Rotary Batch Mixer offers 100 percent uniform particle distribution, 100 percent uniform liquid coatings, the fastest cycle times, gentle product handling, the lowest energy consumption per pound of blended product per hour, and complete discha...view more The Munson Rotary Batch Mixer offers 100 percent uniform particle distribution, 100 percent uniform liquid coatings, the fastest cycle times, gentle product handling, the lowest energy consumption per pound of blended product per hour, and complete discharge with no segregation of blended products. view less |  |
| Rotary Continuous Mixers | Munson Machinery Co., Inc. | The Munson Rotary Continuous Mixer provides gentle, 100 percent uniform, dust-free blending at rates from 25 to 5000 cubic feet per hour—inexpensively and in minimal floor space. Whether adding 1/100% minor additive to a blend, liquid-spray-coating a mate...view more The Munson Rotary Continuous Mixer provides gentle, 100 percent uniform, dust-free blending at rates from 25 to 5000 cubic feet per hour—inexpensively and in minimal floor space. Whether adding 1/100% minor additive to a blend, liquid-spray-coating a material or homogenizing, Munson has a solution to your continuous processing needs. view less |  |
| Rotary Drum Screen | Munson Machinery Co., Inc. | Munson Rotary Drum Screens utilize a cylindrical drum constructed of wedge wire screen to remove solid materials from waste streams at capacities from 200 to 4,650 gal/min. Models with drums of 24 in. (610 mm) diameter are offered in 36, 48, 50 and 72 in...view more Munson Rotary Drum Screens utilize a cylindrical drum constructed of wedge wire screen to remove solid materials from waste streams at capacities from 200 to 4,650 gal/min. Models with drums of 24 in. (610 mm) diameter are offered in 36, 48, 50 and 72 in. (914, 1219, 1270 and 1829 mm) lengths. Models with drums of 36 in. (914 mm) diameter are offered in 96 and 120 in. (2438 and 3048 mm) lengths. view less |  |
| Rotary Glass Batchers | Munson Machinery Co., Inc. | The Munson Glass Batcher is designed for blending of ingredients (including cullet) comprising glass formulations. While designed to meet glass industry requirements, the Munson Batcher is also well suited for mixing of ceramics, refractory products, powd...view more The Munson Glass Batcher is designed for blending of ingredients (including cullet) comprising glass formulations. While designed to meet glass industry requirements, the Munson Batcher is also well suited for mixing of ceramics, refractory products, powdered metal and other highly abrasive materials with extreme reliability and efficiency. view less |  |
| Rotary Knife Cutters | Munson Machinery Co., Inc. | Munson's Rotary Knife Cutter is designed primarily as a cutter/cracker for grains, spices, roots and related food products. One of the more popular applications is cutting corn for chicken feed. It delivers controlled end product sizes with minimum fines ...view more Munson's Rotary Knife Cutter is designed primarily as a cutter/cracker for grains, spices, roots and related food products. One of the more popular applications is cutting corn for chicken feed. It delivers controlled end product sizes with minimum fines at ultra-high rates, achieved by means of five rotating blades cutting against four stationary blades, and propelling on-size particles through a perforated screen with 270° of exposure. view less |  |
| Rotary Lump Breaker | Munson Machinery Co., Inc. | The Rotary Lump Breaker is a heavy duty, dual-rotor mill that is inexpensive, simple to maintain, and trouble free. It is designed for cost-effective, rapid, in-line de-agglomerating, or situations where high speed and high horsepower are not required. It...view more The Rotary Lump Breaker is a heavy duty, dual-rotor mill that is inexpensive, simple to maintain, and trouble free. It is designed for cost-effective, rapid, in-line de-agglomerating, or situations where high speed and high horsepower are not required. It is available in a variety of materials such as carbon steel, #304 and #316 stainless steel, abrasion resistant steel (AR-235), and in sanitary construction. view less |  |
| SA-9600 Series Surface Area Analyzers | HORIBA Instruments, Inc. | SA-9600 Series Surface Area Analyzer brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements with push-button ease. ...view more SA-9600 Series Surface Area Analyzer brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements with push-button ease. It's use of the flowing-gas method allows routine total surface area measurements to be made as quickly as every six minutes, depending on magnitude of surface area. The three-station SA-9603 analyzer measures three samples simultaneously. Because it is fully automated, the SA-9600 series eliminates variables that are sometimes introduced by operator involvement, such as the measurement of nitrogen or movement of the dewer flasks. The SA-9600 provides quick, user friendly specific surface area analysis for a wide variety of powders ranging from catalysts to active pharmaceutical ingredients (API’s). Low surface area API’s and excipients are particularly well suited for analysis by the SA-9600, which provides a quicker measurement time at a lower cost than competitive options. view less |  |
| Sample Center Program | Chemical Marketing Concepts, Inc. | From our state-of-the-art warehouse and distribution sites strategically located in the U.S., Europe and Asia we have processed over 6.5 million sample shipments. We ship over 90% of our orders within 24 hours! |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipm...view more Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipment can match. view less |  |
| SCC Screen Classifying Cutters | Munson Machinery Co., Inc. | The Munson "SCC" Screen Classifying Cutter range of products are highly effective at cutting hard, soft and fibrous materials into controlled particle sizes with minimal fines at high rates. They feature proprietary helical rotor design with dozens of cut...view more The Munson "SCC" Screen Classifying Cutter range of products are highly effective at cutting hard, soft and fibrous materials into controlled particle sizes with minimal fines at high rates. They feature proprietary helical rotor design with dozens of cutter blades attached to a helical array of staggered holders called "interconnected parallelograms" to continuously shear oversize materials against twin, stationary bed knives. view less |  |
| Small Package Sales Program | Chemical Marketing Concepts, Inc. | CMC offers small order sales of your material through our Small Package Sales Program. We can take orders directly from you or your customer for the purchase of samples, gallons, 5 gallon pails or other small sizes of products that you have designated for...view more CMC offers small order sales of your material through our Small Package Sales Program. We can take orders directly from you or your customer for the purchase of samples, gallons, 5 gallon pails or other small sizes of products that you have designated for a revenue stream. view less |  |
| SMARTPAVE / SMARTPAVE PLUS ASPHALT RHEOMETER | Anton Paar Viscosity & Rheology | The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-b...view more The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315. The SmartPave rheometer takes asphalt rheology to previously unattained levels of accuracy, comfort, and ease of use. view less |  |
| Specification & Certification Testing Services | Univar Solutions Lab Services | We are uniquely positioned to service the needs of the Petroleum, Petrochemical, Refining and Chemical industries. Univar Solutions (formerly Nexeo Lab Services)’ Specification and Certification Testing Lab (formerly ST Labs) has serviced the chemical an...view more We are uniquely positioned to service the needs of the Petroleum, Petrochemical, Refining and Chemical industries. Univar Solutions (formerly Nexeo Lab Services)’ Specification and Certification Testing Lab (formerly ST Labs) has serviced the chemical and petrochemical industry for more than 30 years, offering a wide range of comprehensive testing services, and continues to set the standard for quality and accuracy. view less | |
| SSC Magnum Cutters | Munson Machinery Co., Inc. | Munson's SCC Magnum Cutter is an ultra heavy-duty version of the SCC Cutter, itself an exceptionally rugged machine. While the SCC Magnum Cutter handles the same types of materials as the SCC cutter, its extremely robust design enables it to accommodate i...view more Munson's SCC Magnum Cutter is an ultra heavy-duty version of the SCC Cutter, itself an exceptionally rugged machine. While the SCC Magnum Cutter handles the same types of materials as the SCC cutter, its extremely robust design enables it to accommodate infeed of significantly larger sizes, and achieve much higher rates with ease. view less |  |
| Static/Motionless Mixers | Charles Ross & Son Company | Ross LPD/LLPD (low pressure drop) and ISG (interfacial surface generator) Motionless Mixers are well known for their wide ranging uses in turbulent and laminar flow mixing applications. |  |
| Steel Pail with Full Plastic Liner | Cleveland Steel Container Corporation | A steel pail with a full plastic liner is an ideal package when you need the compatibility of plastic and the strength of steel. | |
| Steel Pail with Poly Bottle Insert | Cleveland Steel Container Corporation | The Steel Pail with Poly Bottle Insert can be manufactured in an open head straight-sided or a tighthead style pail. This container is intended for products that need to be packaged in plastic but warrant the protection of a steel pail. It is a great opti...view more The Steel Pail with Poly Bottle Insert can be manufactured in an open head straight-sided or a tighthead style pail. This container is intended for products that need to be packaged in plastic but warrant the protection of a steel pail. It is a great option for overseas and domestic shipments where durability and overall package integrity is a concern. view less | |
| Straight Sided - Open Head Pail | Cleveland Steel Container Corporation | Straight Sided - Open Head Pail has a straight body design, and is ideal for products that require a follower plate for dispensing products such as adhesives, lubricants and greases. | |
| Systems And Controls | Charles Ross & Son Company | Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific n...view more Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific needs. view less |  |
| SZ-100 - Nanopartica Series Instruments | HORIBA Instruments, Inc. | SZ-100 - Nanopartica Series Instruments is a highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle diameter, zeta potential, and molecular weight. Advan...view more SZ-100 - Nanopartica Series Instruments is a highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle diameter, zeta potential, and molecular weight. Advantages of SZ-100 include sampling measurement using the industry’s lowest sample volume of 100 μL is possible and arithmetic processing from an auto-correlation function by a Fourier transformation to electrical mobility. SZ-100 provides a mean to highly accurate, highly reproducible measurement: electro-osmotic flow countermeasure. Some applications for SZ-100 include biomaterials such as vitamins, enzymes and metals. view less |  |
| Three Roll Mill | Charles Ross & Son Company | When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all other...view more When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all others are measured — in applications as diverse as magnetic coatings, cosmetics, paints, inks and high performance ceramics. view less |  |
| Tighthead - Closed Head Pail | Cleveland Steel Container Corporation | Tighthead - Closed Head Pail has a non-removable top ideal for products that need a higher UN rating. There are a variety of fittings available. | |
| Titan 20 Shredder | Munson Machinery Co., Inc. | Titan 20 Shredder shreds plastics and purgings, wood products, carpets, glass, aluminum, PET bottles and various industrial, medical and manufacturing waste products. It handles the toughest size reduction problem materials with low RPM, high torque and ...view more Titan 20 Shredder shreds plastics and purgings, wood products, carpets, glass, aluminum, PET bottles and various industrial, medical and manufacturing waste products. It handles the toughest size reduction problem materials with low RPM, high torque and little temperature rise. This instrument reduces bulk volume up to 75 to 80%. Positive self-cleaning shearing action assures no product binding or plugging, available with automatic reversing. view less |  |
| Trias™ 300 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...view more Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. view less |  |
| Trias™ 600 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...view more Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. view less |  |
| Trias™ 800 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...view more Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. view less |  |
| Trinomic™ 1300 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...view more Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning view less |  |
| Trinomic™ 600 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...view more Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning view less |  |
| Tumble Blenders | Charles Ross & Son Company | Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror ...view more Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror finish on interior surfaces, 150 grit finish on exterior surfaces, and the non-stainless steel components are finished with a durable two-component paint. view less |  |
| Turbiscan™ AGS | Formulaction Inc. | The Turbiscan™ AGS integrates the Turbiscan™ LAB stability analyzer to an autosampling robot capable of analyzing up to 54 samples with three different temperature chambers operating from RT to 60 degrees C. |  |
| Turbiscan™ Classic MA 2000 | Formulaction Inc. | Turbiscan™ Classic MA 2000 is the device to optimise the pre-formulation work by giving an insight into the instability phenomena. |  |
| TURBISCAN™ HEAVY FUEL | Formulaction Inc. | Turbiscan™ Heavy Fuel is the easiest and fastest analytical device to perform complete stability tests on fuel oil, crude oil, drilling fluid, effect of additive, water-in-oil demulsification. |  |
| Turbiscan™ LAB | Formulaction Inc. | The Turbiscan™ LAB can quantify and predict the stability of concentrated systems such as emulsions, dispersions and foams. A non-invasive Multiple Light Scattering (MLS) technique is employed to determine the intensity of particle migration kinetics (sed...view more The Turbiscan™ LAB can quantify and predict the stability of concentrated systems such as emulsions, dispersions and foams. A non-invasive Multiple Light Scattering (MLS) technique is employed to determine the intensity of particle migration kinetics (sedimentation, creaming, clarification) and particle size change kinetics (flocculation, coalescence, packing) as well as phase thickness growth. Analysis can be performed from RT to 60 degrees C on samples up to 95% concentration. view less |  |
| Turbiscan™ Online Process | Formulaction Inc. | Turbiscan™ Online and Turbiscan™ Online+ to monitor on-line and in real time the physical properties of liquid dispersions: diameter and concentration. |  |
| UniPak™ System | Cleveland Steel Container Corporation | The UniPak™ System allows for two separate products to be shipped in one UN rated container. An ideal packaging choice for two part coatings in which a catalyst must be segregated from the base product until mixing prior to application. The UniPak™ System...view more The UniPak™ System allows for two separate products to be shipped in one UN rated container. An ideal packaging choice for two part coatings in which a catalyst must be segregated from the base product until mixing prior to application. The UniPak™ System includes a specially designed steel cover to work with an extended lip plastic tray or cradle. The plastic cradle is designed to hold a 1 gallon tin can while the plastic tray is designed to hold either free flowing material, a small container or bag. view less |
