| KRATON® D1111 KT Polymer | Univar Solutions | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...view more KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1111 KU Polymer | Univar Solutions | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...view more KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1113 PT Polymer | Univar Solutions | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...view more KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1114 PT Polymer | Univar Solutions | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1117 PT Polymer | Univar Solutions | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1118 ET Polymer | Univar Solutions | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...view more KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1118 ETM Polymer | Univar Solutions | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...view more KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1119 PT Polymer | Univar Solutions | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1124 PT Polymer | Univar Solutions | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...view more KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1126 PT Polymer | Univar Solutions | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...view more KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1155 ES Polymer | Univar Solutions | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1157 ES Polymer | Univar Solutions | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1161 KT Polymer | Univar Solutions | KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low ...view more KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1161 KU Polymer | Univar Solutions | KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and ...view more KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1161 PT Polymer | Univar Solutions | KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...view more KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1162 PT Polymer | Univar Solutions | KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1162 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1163 PT Polymer | Univar Solutions | KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...view more KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1164 PT Polymer | Univar Solutions | KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1164 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1165 PT Polymer | Univar Solutions | KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1165 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1171 PT Polymer | Univar Solutions | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness,...view more KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. view less | Request Sample |
| KRATON® D1184 AIM Polymer | Univar Solutions | KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range...view more KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1184 AT Polymer | Univar Solutions | KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1191 ET Polymer | Univar Solutions | KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. view less | Request Sample |
| KRATON® D1192 ET Polymer | Univar Solutions | KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...view more KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1192 ETM Polymer | Univar Solutions | KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, an...view more KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1193 PT Polymer | Univar Solutions | KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...view more KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1193 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D4150 KT Polymer | Univar Solutions | KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...view more KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D4150 KU Polymer | Univar Solutions | KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, a...view more KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® FG1901 GT Polymer | Univar Solutions | KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...view more KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1901 GT Polymer is used in adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® FG1924 GT Polymer | Univar Solutions | KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...view more KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1924 GT Polymer is used in adhesives, coatings, and sealants. view less | Request Sample |
| LUMIFLON® FD1000 | Univar Solutions | LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weigh...view more LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weight combined with a high hydroxyl value for creating 2K waterbased polyurethane coatings with a high crosslink density. This waterborne polyol is classified as a dispersion as it is synthesized without emulsifier. This unique, emulsifier-free technology allows for the formulation of waterbased 2K polyurethane coatings with the same performance as traditional solventbased 2K coatings. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. view less | Request Sample |
| LUMIFLON® FE4300 | Univar Solutions | LUMIFLON® FE4300 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coat...view more LUMIFLON® FE4300 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coatings with excellent resistance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. view less | Request Sample |
| LUMIFLON® LF-552 | Univar Solutions | LUMIFLON® LF-552 is a moderate molecular weight, moderate OH number resin dissolved in a blend of cyclohexanone and Aromatic 150 solvent. It is used in coil coatings where outstanding weatherability is required. This product is modified to improve pigment...view more LUMIFLON® LF-552 is a moderate molecular weight, moderate OH number resin dissolved in a blend of cyclohexanone and Aromatic 150 solvent. It is used in coil coatings where outstanding weatherability is required. This product is modified to improve pigment compatibility, resulting in crisp, clear colors in a broad range of colors. The major market for coil coatings made with LF-552 is in architectural coatings. view less | Request Sample |
| LUMIFLON® LF-710F | Univar Solutions | LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin ca...view more LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin can be crosslinked with standard aliphatic blocked isocyanates. Potential applications for coatings made with LF-710F include architectural (window frames and construction panels), heavy equipment coatings, and clear coats for automotive and aerospace applications. view less | Request Sample |
| LUMIFLON® LF-810 | Univar Solutions | LUMIFLON® LF-810 is a high molecular weight, low OH number fluoropolymer resin. It is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with...view more LUMIFLON® LF-810 is a high molecular weight, low OH number fluoropolymer resin. It is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with LF-810 include architectural, industrial maintenance, and bridge coatings. view less | Request Sample |
| LUMIFLON® LF200 | Univar Solutions | LUMIFLON® LF200 is a solventborne fluoroethylene vinyl ether resin designed for weather-resistant coatings. It has hydroxyl functionality and can be crosslinked with polyisocyanates. Coatings based on LF200 exhibit high gloss and excellent durability. Thi...view more LUMIFLON® LF200 is a solventborne fluoroethylene vinyl ether resin designed for weather-resistant coatings. It has hydroxyl functionality and can be crosslinked with polyisocyanates. Coatings based on LF200 exhibit high gloss and excellent durability. This product is a general purpose resin, used for heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for alternative energy applications. It is also available in a flake version called LF200F. This flake grade can be used with exempt solvents for low VOC formulations. view less | Request Sample |
| LUMIFLON® LF200F | Univar Solutions | LUMIFLON® LF200F is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has both moderate molecular weight and h...view more LUMIFLON® LF200F is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has both moderate molecular weight and hydroxyl value making it a versatile polyol for various applications. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. view less | Request Sample |
| LUMIFLON® LF910LM | Univar Solutions | LUMIFLON® LF910LM is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2...view more LUMIFLON® LF910LM is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2K crosslinkable coatings. Low molecular weight also allows for easy blending with other polyols. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. view less | Request Sample |
| LUMIFLON® LF916F | Univar Solutions | LUMIFLON® LF916F is fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with...view more LUMIFLON® LF916F is fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with a high hydroxyl value for formulating highly crosslinked 2K coatings with excellent performance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. view less | Request Sample |
