| BECKOSOL AQ® 521 | Polynt Composites | BECKOSOL AQ® 521, in the form of a milky, white liquid, is a low-VOC, epoxy modified alkyd latex that can be used in porous concrete and masonry sealers. This product provides a good "wet look" appearance with low odor and can clean up with water. It is u...view more BECKOSOL AQ® 521, in the form of a milky, white liquid, is a low-VOC, epoxy modified alkyd latex that can be used in porous concrete and masonry sealers. This product provides a good "wet look" appearance with low odor and can clean up with water. It is user-friendly and is low-viscosity. view less | |
| BYD3910 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color...view more BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| BYD3928 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compat...view more BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| BYD8001 | Tianyi Chemical Engineering Material Co., Ltd. | BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain r...view more BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain resistance. Its pH value is 9.0 +/- 1.0. view less | |
| Disvacryl-1000 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1000 is a thermoplastic acrylic resin. This product includes xylene as volatile byproducts. It can be used in high-quality air-drying finishes for metal, wood, concrete, and masonry. | |
| Docure KH-814 | Kukdo Chemical Co., Ltd. | Docure KH-814 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-814 has low viscosity and solvent free. It can be used for mortar, floor repair and commercial and industrial floorings. It is well suited for the use in formulati...view more Docure KH-814 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-814 has low viscosity and solvent free. It can be used for mortar, floor repair and commercial and industrial floorings. It is well suited for the use in formulating products such as solvent free coatings. view less | |
| EPODIL® 747 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain term...view more EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. It is ideal for use in flooring, mortars, and grouts, high and 100%-solids coatings, laminates, and potting compounds. view less | Request Sample |
| EPODIL® 757 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting...view more EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting compounds, mortars, grouts and flooring. view less | Request Sample |
| Epokukdo KEM-128M | Kukdo Chemical Co., Ltd. | Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and...view more Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and water dispersible curing agent like KH-723 are applied for water thinned two pack coatings, coal tar modified paint and primer for steel, concrete, and other nonmetallic substrates. It is also applied for decorative wall, structural grouting, adhesives and mortar in order to improve adhesive property and physical properties of cement by adding 10-20wt% epoxy resin emulsion. view less | |
| EPS® 2843 | EPS Materials | EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for u...view more EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less | Request Sample |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...view more L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. view less | |
| Mowinyl 702 | Nippon Gohsei | Mowinyl 702 is a synthetic acrylic resin emulsion that provides good initial water resistance and adherence to various substrates. This product is well suited for use in tennis court paint formulations. | |
| Mowinyl 752 | Nippon Gohsei | Mowinyl 752 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good water and alkaline resistance, this product is well suited for use in slate roofing paint, sand-textured coating, and floor coating applications. | |
| Mowinyl 801 | Nippon Gohsei | Mowinyl 801 is a water-based synthetic resin emulsion composed of a vinyl acetate/VeoVa copolymer. Featuring good miscibility with various agents, this product is well suited for use in heat-resistant paint and sand-textured coating applications. | |
| Mowinyl DM60 | Nippon Gohsei | Mowinyl DM60 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good elasticity and pigment mixing stability, this product is well suited for use in exterior paint and sand-textured coating applications. | |
| Mowinyl DM772 | Nippon Gohsei | Mowinyl DM772 is a synthetic acrylic resin emulsion that provides good adherence to various substrates. This product is well suited for use in clear coats and paints for pavement applications. | |
| Mowinyl LDM6740 | Nippon Gohsei | Mowinyl LDM6740 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good pigment fixing strength and water resistance, this product is well suited for use in sand-textured coating applications. | |
| Mowinyl LDM7520 | Nippon Gohsei | Mowinyl LDM7520 is a synthetic acrylic resin emulsion featuring good pigment mixing stability, water resistance, and hardening properties. This product is well suited for use in sand-textured coating applications. | |
| PLIOLITE® AC4 | Omnova Solutions | PLIOLITE® AC4 is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a thixotropic behavior. PLIOLITE® AC4 forms tough abrasion and chemically resi...view more PLIOLITE® AC4 is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a thixotropic behavior. PLIOLITE® AC4 forms tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Typical applications include: exterior masonry coatings, structural steel, intumescent coatings. view less | |
| PLIOLITE® AC80 | Omnova Solutions | PLIOLITE® AC80 is a newtonian styrene acrylate copolymer, often used in combination with AC4 or AC5G. PLIOLITE® AC80 forms tough abrasion, chemically resistant films that have excellent adhesion, UV resistance and weathering properties. Typical applicatio...view more PLIOLITE® AC80 is a newtonian styrene acrylate copolymer, often used in combination with AC4 or AC5G. PLIOLITE® AC80 forms tough abrasion, chemically resistant films that have excellent adhesion, UV resistance and weathering properties. Typical applications include: "all weather" masonry coatings, anticarbonation, metal protective, intumescent coatings. view less | |
| PLIOLITE® VTAC-L | Omnova Solutions | PLIOLITE® VTAC-L is a highly soluble vinyl toluene-acrylate copolymer. This newtonian film forming resin is recommended for applications where high solubility, high film hardness, good adhesion and balanced ageing properties are required. Typical uses of ...view more PLIOLITE® VTAC-L is a highly soluble vinyl toluene-acrylate copolymer. This newtonian film forming resin is recommended for applications where high solubility, high film hardness, good adhesion and balanced ageing properties are required. Typical uses of PLIOLITE® VTAC-L (alone or in combination with AC3-H) include: flat or high build masonry paints, intumescent coatings. view less | |
| PLIOTEC® EL25 | Omnova Solutions | PLIOTEC® EL25 is an elastomeric acrylic latex very suitable for the formulation of high performance coatings with superior elastomeric properties across a broad temperature range. PLIOTEC® EL25 provides excellent tensile/elongation properties, crack-bridg...view more PLIOTEC® EL25 is an elastomeric acrylic latex very suitable for the formulation of high performance coatings with superior elastomeric properties across a broad temperature range. PLIOTEC® EL25 provides excellent tensile/elongation properties, crack-bridging ability, excellent dirt pick-up resistance and UV resistance. Typical applications include: vertical exterior masonry coatings and roof coatings. view less | |
| PLIOTEC® PA20 | Omnova Solutions | PLIOTEC® PA20 is a pure acrylic latex designed for high performance clear and pigmented coatings, with excellent blush resistance, very good exterior weatherability and UV resistance. PLIOTEC® PA20 provides excellent water and early moisture resistance, a...view more PLIOTEC® PA20 is a pure acrylic latex designed for high performance clear and pigmented coatings, with excellent blush resistance, very good exterior weatherability and UV resistance. PLIOTEC® PA20 provides excellent water and early moisture resistance, and very good adhesion to concrete and masonry. Typical applications include: stucco coatings, universal primers and topcoats, clear and pigmented sealers. view less | |
| PLIOTEC® SA 40 | Omnova Solutions | PLIOTEC® SA 40 is a carboxylated styrene acrylic dispersion used in coatings with excellent adhesion to concrete, water resistance and pigment binding capability. PLIOTEC® SA 40 resin is particularly suitable for low VOC odorless waterproofing sealers and...view more PLIOTEC® SA 40 is a carboxylated styrene acrylic dispersion used in coatings with excellent adhesion to concrete, water resistance and pigment binding capability. PLIOTEC® SA 40 resin is particularly suitable for low VOC odorless waterproofing sealers and exterior masonry pigmented primers, providing excellent resistance to alkali and efflorescence, even on fresh concrete or renovation mortars. view less | |
| RAYKOTE® 1515 | Specialty Polymers, Inc. | RAYKOTE® 1515 is anionic styrene acrylic emulsion that is classified as an efflorescence resistant polymer. This product is designed for masonry, plaster and concrete applications. RAYKOTE® 1515 provides protection against water, alkali metals and efflore...view more RAYKOTE® 1515 is anionic styrene acrylic emulsion that is classified as an efflorescence resistant polymer. This product is designed for masonry, plaster and concrete applications. RAYKOTE® 1515 provides protection against water, alkali metals and efflorescence corrosion. It is best for rough surfaces as it has pigment binding ability and steadiness when it is used as part of the grind base. The primary use of this product is to be applied so it adheres to a surface and is used to protect against water and other chemical corrosion. RAYKOTE® 1515 can also be blended with other resins. view less | |
| UROTUF® F96-MPW-32 | Polynt Composites | UROTUF® F96-MPW-32 is a waterborne, oil-modified urethane dispersion that can be used in wood floor finishes, exterior spar varnishes, semi-transparent or opaque exterior stains, exterior pigmented topcoats, furniture finishes, and clear masonry finishes....view more UROTUF® F96-MPW-32 is a waterborne, oil-modified urethane dispersion that can be used in wood floor finishes, exterior spar varnishes, semi-transparent or opaque exterior stains, exterior pigmented topcoats, furniture finishes, and clear masonry finishes. This product features mar and scuff resistance, impact resistance, stain, chemical and block resistance, and easy flatting in a one-component system. view less | |
| VINAVIL® 5406P | VINAVIL Americas Corp. | VINAVIL® 5406P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/vinyl versatate/acrylic ester in a polyvinyl alcohol colloid that can be used in adhesive mortar, plaster and exterior insulation finish systems. This product is part...view more VINAVIL® 5406P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/vinyl versatate/acrylic ester in a polyvinyl alcohol colloid that can be used in adhesive mortar, plaster and exterior insulation finish systems. This product is particularly recommended in the formation of gypsum plasters. The colloid will increase the water-resistance, flexural strength, and mechanical resistance of finished products. view less | |
| VINAVIL® 5603P | VINAVIL Americas Corp. | VINAVIL® 5603P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/ethylene colloid that can be used in tile adhesives and grouts requiring deformability. It can also be used in cements, mortars, paints, and plasters. This product i...view more VINAVIL® 5603P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/ethylene colloid that can be used in tile adhesives and grouts requiring deformability. It can also be used in cements, mortars, paints, and plasters. This product is particularly indicated for gypsum plasters, because the colloid improves the water-resistance, flexural strength, and mechanical resistance of finite products. view less | |
| VINAVIL® 5706 | VINAVIL Americas Corp. | VINAVIL® 5706, in the form of a clear, slightly tacky film, is an elastomeric styrene/acrylic copolymer containing high solids that can be used in wood flat paints and primers, flexible coatings, waterproof membranes, interior or exterior wall paints and ...view more VINAVIL® 5706, in the form of a clear, slightly tacky film, is an elastomeric styrene/acrylic copolymer containing high solids that can be used in wood flat paints and primers, flexible coatings, waterproof membranes, interior or exterior wall paints and plasters, and flooring adhesives. This product will improve the water-resistance, the flexibility and adhesion to different substrates of cement-based systems. view less | |
| VINAVIL® 6713 | VINAVIL Americas Corp. | VINAVIL® 6713, in the form of a white, non-tacky film, is a modified styrene/acrylic copolymer emulsion containing high solids that can be used in flexible coating and waterproofing membranes. This product is in an anionic/non-ionic emulsifying system. ...view more VINAVIL® 6713, in the form of a white, non-tacky film, is a modified styrene/acrylic copolymer emulsion containing high solids that can be used in flexible coating and waterproofing membranes. This product is in an anionic/non-ionic emulsifying system. THe finished product dries quickly and is compatible with flexible latex/cement mortars. view less | |
| VINAVIL® T05 PA | VINAVIL Americas Corp. | VINAVIL® T05 PA, in the form of a beige powder, is a polyvinyl alcohol colloid based on vinyl acetate/vinyl-versatate copolymers that can be used in tile adhesives, wallpaper adhesives, cement-based mortars, and paints and plasters. This product is compa...view more VINAVIL® T05 PA, in the form of a beige powder, is a polyvinyl alcohol colloid based on vinyl acetate/vinyl-versatate copolymers that can be used in tile adhesives, wallpaper adhesives, cement-based mortars, and paints and plasters. This product is compatible with cementitious binders and gypsum-based materials used in the formation of construction mortars. view less | |
| VINAVIL® VV10Z | VINAVIL Americas Corp. | VINAVIL® VV10Z, in the form of a free-flowing beige powder, is a vinyl-versatate/vinyl-acetate copolymer in a polyvinyl alcohol colloid that can be used in paints and plasters, cements, mortars, and self-leveling compounds. This product should be mixed w...view more VINAVIL® VV10Z, in the form of a free-flowing beige powder, is a vinyl-versatate/vinyl-acetate copolymer in a polyvinyl alcohol colloid that can be used in paints and plasters, cements, mortars, and self-leveling compounds. This product should be mixed with dry products and stored in a water-resistant container. On contact with water, and under the action of mechanical shear, it reproduces the original dispersion. view less | |
| WorléeCryl® A 2141 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstandi...view more WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstanding gloss, hardness, chemical- and weather-resistance. Application fields for W´Cryl A 2141 are high solid paints for facade elements, caravans and plastics. view less | |
| High Build Exterior Masonry Coating (Formulation #07-1040B) | Ashland | PVC 50% - Pliotec LEB 18* low exudation binder exterior masonry coating. |
