| GENOMER* 7151 | Rahn USA Corp. | GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use...view more GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less | Request Sample |
| Hanwha KCH-15 | Hanwha Chemical Corporation | Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other product...view more Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other products requiring satisfactory adhesion to metal surfaces and corrosion resistance. view less | |
| Hanwha TP-400M | Hanwha Chemical Corporation | Hanwha TP-400M is a PVC resin made from a terpolymer with outstanding adhesion to metals. It is well suited for use in the production of metal coatings, paints and aluminum printing inks. | |
| Hauthane HD-2117 | Hauthaway | Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concret...view more Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. HD-2117 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| Hauthane HD-2503 | Hauthaway | Hauthane HD-2503 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradati...view more Hauthane HD-2503 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. HD-2503 is ideally suited for exterior applications where film durability and longevity are important considerations. HD-2503 may be formulated into coatings applied by spray, brush or pad applicator. It can be used as a sole vehicle or blended with acrylic emulsions. The rheology may be modified with associative thickeners. view less | |
| Hauthane HD-2602 | Hauthaway | Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silic...view more Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. HD-2602 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| Hauthane HD-4669 | Hauthaway | Hauthane HD-4669 is a hard, co-solvent free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4669 can be used as a sole vehicle or blende...view more Hauthane HD-4669 is a hard, co-solvent free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4669 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It may be thickened with associative thickeners for alternative application methods. view less | |
| Hauthane HD-4675 | Hauthaway | Hauthane HD-4675 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4675 can be used as supplied or blended wi...view more Hauthane HD-4675 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4675 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. view less | |
| Hauthane HD-6000 | Hauthaway | Hauthane HD-6000 is a polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The pr...view more Hauthane HD-6000 is a polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. HD-6000 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. view less | |
| Hauthane HD-6002 | Hauthaway | Hauthane HD-6002 is a polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer's Bayhydur 302 or Perstorp's Easaqua D 401/501. The prod...view more Hauthane HD-6002 is a polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer's Bayhydur 302 or Perstorp's Easaqua D 401/501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. HD-6002 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. view less | |
| Hauthane L-2857 | Hauthaway | Hauthane L-2857 is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugiti...view more Hauthane L-2857 is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. L-2857 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| Hauthane L-2875 | Hauthaway | Hauthane L-2875 is a hard, NMP-free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2875 can be used as supplied or blended with acryli...view more Hauthane L-2875 is a hard, NMP-free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2875 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. view less | |
| Hauthane L-2877 | Hauthaway | Hauthane L-2877 is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, pla...view more Hauthane L-2877 is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2877 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| Hauthane L-2883 | Hauthaway | Hauthane L-2883 is an NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X ...view more Hauthane L-2883 is an NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X D 401. The product, when crosslinked provides tough, chemical-resistant, semi-gloss coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. L-2883 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. view less | |
| Hauthane L-2892 | Hauthaway | Hauthane L-2892 is extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, ...view more Hauthane L-2892 is extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2892 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. L-2892 can be used as a sole resin vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| Hauthane L-2996 | Hauthaway | Hauthane L-2996 is an NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers. The product, when crosslinked provides tough, ch...view more Hauthane L-2996 is an NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. L-2996 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. view less | |
| Hauthane L-3225 | Hauthaway | Hauthane L-3225 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. ...view more Hauthane L-3225 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3225 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. view less | |
| Hauthane L-3310 | Hauthaway | Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrat...view more Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrates, including concrete, metal, plastic and wood. L-3310 is ideal for use in applications where excellent flow and leveling properties, and high levels of water- and chemical-resistance are required. L-3310 can be used as a sole vehicle or blended with acrylic emulsions for spray, brush or roller applications. Rheology modifications can be made with associative thickeners. view less | |
| Hauthane L-3466 | Hauthaway | Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicon...view more Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. L-3466 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| HS9301 | Tianyi Chemical Engineering Material Co., Ltd. | HS9301, in the form of a transparent resin, is a pure acrylate resin that can be used in vacuum plating surface paints, top coating varnishes, or metal UV paints. This product is soluble in active monomers or inert solvents. | |
| HS9301B | Tianyi Chemical Engineering Material Co., Ltd. | HS9301B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV cured coatings, paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| HS9303B | Tianyi Chemical Engineering Material Co., Ltd. | HS9303B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV-cured coatings like paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| HS9510 | Tianyi Chemical Engineering Material Co., Ltd. | HS9510, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in vacuum plating finishes, wood coatings, and metal coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that p...view more HS9510, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in vacuum plating finishes, wood coatings, and metal coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. view less | |
| HS9545 | Tianyi Chemical Engineering Material Co., Ltd. | HS9545, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in metal or plastic spray coatings. This product is resistant to stains and abrasion. Its substrate is an oligomer that performs well in radiation or peroxid...view more HS9545, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in metal or plastic spray coatings. This product is resistant to stains and abrasion. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. view less | |
| HS9555 | Tianyi Chemical Engineering Material Co., Ltd. | HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof...view more HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof and plates easily. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. view less | |
| HS9732 | Tianyi Chemical Engineering Material Co., Ltd. | HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provi...view more HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provides a good balance between water and inks. view less | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...view more IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. view less | |
| IDROBEN PD 723 40% W | Benasedo | IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Pol...view more IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Polystyrene etc.) wood and metal substrates, endowed with Flexibility, adhesion, very good water and out door resistance. view less | |
| ISOBEN 6 | Benasedo | ISOBEN 6 is a non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. In combination with aliphatic polyisocianates, provides films having very good gloss and colour retention. | |
| ISOBEN 87 | Benasedo | ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain ...view more ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain high–quality enamels for metals, suitable both for interior and exterior applications. view less | |
| Isocryl® N-2513 | Estron Chemical, Inc. | Isocryl® N-2513 is a solid, non-reactive, moderate molecular weight acrylic resin provided in flake form. The product is suitable for use as a primary binder resin or modifying resin when formulated in reactive (thermal or UV cure) or non-reactive (solven...view more Isocryl® N-2513 is a solid, non-reactive, moderate molecular weight acrylic resin provided in flake form. The product is suitable for use as a primary binder resin or modifying resin when formulated in reactive (thermal or UV cure) or non-reactive (solventborne air dry) inks or coatings for application to plastic or metallic substrates. Isocryl® N-2513 provides improved adhesion, flexibility, impact resistance, and pigment dispersion. view less | |
| JONCRYL® 1532 | BASF Dispersions & Resins | JONCRYL 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity conditions...view more JONCRYL 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity conditions. This product exhibits low VOC capability. view less | |
| JONCRYL® 1540 | BASF Dispersions & Resins | JONCRYL 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is sui...view more JONCRYL 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is suitable for metal and hardboard applications. view less | |
| JONCRYL® 500 | BASF Dispersions & Resins | JONCRYL 500 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with JONCRYL 500 features a low viscosity at high solids and excellent flow and leveling exhibiting good durability. High solids polyurethane coa...view more JONCRYL 500 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with JONCRYL 500 features a low viscosity at high solids and excellent flow and leveling exhibiting good durability. High solids polyurethane coatings can be formulated below 2.6 pounds per gallon of Volatile Organic Compounds. JONCRYL 500 can also be used in melamine crosslinked coating systems. This acrylic is available in several alternative solvents. view less | |
| JONCRYL® 507 | BASF Dispersions & Resins | JONCRYL 507 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with JONCRYL 507 feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. It is recommended for urethane...view more JONCRYL 507 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with JONCRYL 507 feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. It is recommended for urethane coating applications in the industrial coatings market. JONCRYL 507 is an alternate solvent version of JONCRYL 500 for low odor and nonHAPS applications. view less | |
| JONCRYL® 508 | BASF Dispersions & Resins | JONCRYL 508 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with this clear liquid feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. JONCRYL 508 is an altern...view more JONCRYL 508 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with this clear liquid feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. JONCRYL 508 is an alternate solvent version of JONCRYL 500 for low VOC applications. view less | |
| JONCRYL® 537 | BASF Dispersions & Resins | JONCRYL 537 is an acrylic emulsion for industrial coating applications. This translucent emulsion provides the fast dry characteristics of an emulsion, while providing the clarity and sandability necessary for applications such as interior wood sealers. | |
| JONCRYL® 550 | BASF Dispersions & Resins | JONCRYL 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially a...view more JONCRYL 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin that is supplied in a 65/35 blend of PM-acetate/toluene. JONCRYL 550 differs from JONCRYL 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of JONCRYL 587. view less | |
| JONCRYL® 551 | BASF Dispersions & Resins | JONCRYL 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially a...view more JONCRYL 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin. JONCRYL 551 differs from JONCRYL 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of JONCRYL 587. view less | |
| JONCRYL® 587-AC | BASF Dispersions & Resins | JONCRYL 587-AC is a conventional solids, acrylic polyol for polyurethane coating applications. This clear liquid is recommended for interior/exterior automotive OEM and refinish coating applications, interior/exterior general metal coating applications, i...view more JONCRYL 587-AC is a conventional solids, acrylic polyol for polyurethane coating applications. This clear liquid is recommended for interior/exterior automotive OEM and refinish coating applications, interior/exterior general metal coating applications, interior/exterior plastic component coating applications and exterior wood coatings for furniture applications view less | |
| JONCRYL® 901 | BASF Dispersions & Resins | JONCRYL 901 is an innovative acrylic oligomer for high solids polyurethane coatings. High solids coatings containing as low as 2.8 pounds per gallon of VOC (Volatile Organic Compounds) can be formulated to spray by conventional or airless equipment. JONCR...view more JONCRYL 901 is an innovative acrylic oligomer for high solids polyurethane coatings. High solids coatings containing as low as 2.8 pounds per gallon of VOC (Volatile Organic Compounds) can be formulated to spray by conventional or airless equipment. JONCRYL 901 displays excellent viscosity characteristics without the addition of low molecular weight reactive diluents. Paints formulated with should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less | |
| JONCRYL® 903 | BASF Dispersions & Resins | JONCRYL 903 is an acrylic polyol for high solids urethane coating applications. | |
| JONCRYL® 909 | BASF Dispersions & Resins | JONCRYL 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane ...view more JONCRYL 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times, hardness development, and practical pot life. High solids coatings for maintenance, transportation, automotive refinish, and other applications can be formulated from 2.8 to 3.5 pounds per gallon of VOC. JONCRYL 909 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product should be considered as a candidate for high performance, maintenance, automotive refinish, and transportation coatings as a replacement for conventional solids urethane finishes. view less | |
| JONCRYL® 910 | BASF Dispersions & Resins | JONCRYL 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fa...view more JONCRYL 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying polyurethane coatings with good pot life and excellent dry time characteristics for maintenance, transportation, and other applications, at VOC levels as low as 3.2 pounds per gallon without exempt solvents. view less | |
| JONCRYL® 915 | BASF Dispersions & Resins | JONCRYL 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of JONCRYL 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink densit...view more JONCRYL 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of JONCRYL 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink density. High solids coatings that are as low as 2.8 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JONCRYL 915 displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids polyurethane finishes. view less | |
| JONCRYL® 920 | BASF Dispersions & Resins | JONCRYL 920 is an innovative acrylic oligomer for high solids polyurethane coatings, which features fast cure with a practical pot life. High solids coatings that are as low as 2.3 pounds per gallon of VOC can be formulated to spray by conventional or air...view more JONCRYL 920 is an innovative acrylic oligomer for high solids polyurethane coatings, which features fast cure with a practical pot life. High solids coatings that are as low as 2.3 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. It displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. JONCRYL 920 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less | |
| JONCRYL® 922 | BASF Dispersions & Resins | JONCRYL 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coat...view more JONCRYL 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times and a practical pot life. High solids coatings for maintenance, transportation, and other applications can be formulated from 2.3 to 3.8 pounds per gallon of VOC. JONCRYL 922 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product is also available in MAK as JONCRYL 920. It should be considered as a candidate for high performance, maintenance, and transportation coatings as a replacement for conventional solids urethane finishes. view less | |
| JONCRYL® 924 | BASF Dispersions & Resins | JONCRYL 924 is an innovative acrylic oligomer for high solids urethane coatings, which features fast cure with a practical pot life. It is supplied in the exempt solvent PCBTF for very low to zero VOC applications, although most formulations will contain ...view more JONCRYL 924 is an innovative acrylic oligomer for high solids urethane coatings, which features fast cure with a practical pot life. It is supplied in the exempt solvent PCBTF for very low to zero VOC applications, although most formulations will contain 1.0 – 2.5 lbs/gal of VOC content. It possesses outstanding exterior durability and outstanding gloss, flow, leveling, and application properties. view less | |
| JONCRYL® 934 | BASF Dispersions & Resins | JONCRYL 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JON...view more JONCRYL 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JONCRYL 934 displays good cure rate and pot life. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less | |
| JONCRYL® 935 | BASF Dispersions & Resins | JONCRYL 935 is a high performance polyol for polyurethane coatings suitable for automotive refinish and industrial applications. It offers excellent exterior durability with good chemical resistance and is available in PCBTF as JONCRYL 939. | |
| JONCRYL® 945 | BASF Dispersions & Resins | JONCRYL 945 is a fast curing acrylic polyol designed for high solids polyurethane coatings. It displays excellent gloss and gloss retention as well as good chemical resistance. JONCRYL 945 should be considered as a candidate for high performance maintenan...view more JONCRYL 945 is a fast curing acrylic polyol designed for high solids polyurethane coatings. It displays excellent gloss and gloss retention as well as good chemical resistance. JONCRYL 945 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less | |
| JONCRYL® RPD 950-AC/P | BASF Dispersions & Resins | JONCRYL RPD 950-AC/P is a specialty acrylic polyol with rapid property development for solvent-borne 2K polyurethane systems in automotive refinish and general industrial applications. This polyol, when cross-linked with either BASONAT® HI 100 or HI 190 a...view more JONCRYL RPD 950-AC/P is a specialty acrylic polyol with rapid property development for solvent-borne 2K polyurethane systems in automotive refinish and general industrial applications. This polyol, when cross-linked with either BASONAT® HI 100 or HI 190 aliphatic trimer isocyanate, provides fast cure with early hardness development and a long pot life. JONCRYL RPD 950-AC/P offers early buffability for automotive refinish applications. view less | |
| L-2813 | Chan Sieh Enterprises Co, Ltd. | L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and te...view more L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and textile coatings. view less | |
| L-2815 | Chan Sieh Enterprises Co, Ltd. | L-2815 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, is solvent free, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, glass fiber sizing, leather coating, and paper and te...view more L-2815 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, is solvent free, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, glass fiber sizing, leather coating, and paper and textile coatings. view less | |
| L-2851 | Chan Sieh Enterprises Co, Ltd. | L-2851 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides chemical and abrasion resistance, and good adhesion to substrates. It can be used in concrete coatings, wall paints, and plastic and ...view more L-2851 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides chemical and abrasion resistance, and good adhesion to substrates. It can be used in concrete coatings, wall paints, and plastic and metal coatings. view less | |
| L-2857 | Chan Sieh Enterprises Co, Ltd. | L-2857 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides good chemical and abrasion resistance, and adheres well. It can be used to coat parquet and cork floors, concrete, wall paint, metal ...view more L-2857 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides good chemical and abrasion resistance, and adheres well. It can be used to coat parquet and cork floors, concrete, wall paint, metal and plastic. It can also be used as an anti-gravity coating. view less | |
| L-2869 | Chan Sieh Enterprises Co, Ltd. | L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and t...view more L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and textile coatings. view less | |
| L-2883 | Chan Sieh Enterprises Co, Ltd. | L-2883 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is hard and flexible, provides good abrasion and chemical resistance, with good adhesion. It can be used to coat paper, plastic, concrete, metal, wood, parquet and l...view more L-2883 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is hard and flexible, provides good abrasion and chemical resistance, with good adhesion. It can be used to coat paper, plastic, concrete, metal, wood, parquet and lacquer. view less | |
| L-2908 | Chan Sieh Enterprises Co, Ltd. | L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal c...view more L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal coatings, and to coat vinyl, wood, and plastic. view less | |
| L-2909 | Chan Sieh Enterprises Co, Ltd. | L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete...view more L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete, metal, vinyl, wood and plastic. view less | |
| L-2916 | Chan Sieh Enterprises Co, Ltd. | L-2916 is an aliphatic polyester polyol with a solid content ratio of 39.5%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates in a broad range of application. It can be used in metal finishing ...view more L-2916 is an aliphatic polyester polyol with a solid content ratio of 39.5%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates in a broad range of application. It can be used in metal finishing repair coatings, floor polishes and wood primers, and coatings for paper, plastic, wood and parquet. view less | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...view more L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. view less | |
| L-2918 | Chan Sieh Enterprises Co, Ltd. | L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal ...view more L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal and plastic. view less | |
| L-2919 | Chan Sieh Enterprises Co, Ltd. | L-2919 is an aliphatic polyester polyol with a solid content ratio of 39%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates with a broad range of application. L-2919 can be used in metal finish...view more L-2919 is an aliphatic polyester polyol with a solid content ratio of 39%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates with a broad range of application. L-2919 can be used in metal finishing repair coatings, floor polish, wood primer, and to coat paper, plastic, wood, and parquet. view less | |
| L-2939 | Chan Sieh Enterprises Co, Ltd. | L-2939 is an aliphatic polyester polyol with a solid content ratio of 34.5%. This product is tough and flexible, and provides chemical and water resistance. It can be used to coat metals. | |
| L-2976 | Chan Sieh Enterprises Co, Ltd. | L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet. | |
| L-2982 | Chan Sieh Enterprises Co, Ltd. | L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet. | |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...view more L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. view less | |
| L-3050 | Chan Sieh Enterprises Co, Ltd. | L-3050 is an aliphatic polycarbonate polyol with a solid content ratio of 34.7%. This product is very hard, tough and flexible. It has good chemical, solvent, water, humidity, and UV resistance. L-3050 adheres well to plastics. This product can be use...view more L-3050 is an aliphatic polycarbonate polyol with a solid content ratio of 34.7%. This product is very hard, tough and flexible. It has good chemical, solvent, water, humidity, and UV resistance. L-3050 adheres well to plastics. This product can be used as the top-coat for PVC and non-PVC flooring, and to coat metal, wood and parquet. view less | |
| L-3935 | Chan Sieh Enterprises Co, Ltd. | L-3935 is a tough, flexible, clear aqueous polyurethane acrylate copolymer that provides high water, alcohol, chemical, and abrasion resistances. This product can be used in industrial wood coatings & varnishes, parquet lacquers, concrete floor coatings, ...view more L-3935 is a tough, flexible, clear aqueous polyurethane acrylate copolymer that provides high water, alcohol, chemical, and abrasion resistances. This product can be used in industrial wood coatings & varnishes, parquet lacquers, concrete floor coatings, and metal coatings. view less | |
| Lumicryl® 1000 | Estron Chemical, Inc. | Lumicryl® 1000 is a unique energy curable (UV/EB) acrylic resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters, other thermoplastics or thermosets, metals, and coated paper substrates. Alternativel...view more Lumicryl® 1000 is a unique energy curable (UV/EB) acrylic resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters, other thermoplastics or thermosets, metals, and coated paper substrates. Alternatively, Lumicryl® 1000 may be appropriate for use as the major film forming component of UV curable coatings. view less | |
| Lumicryl® 101S | Estron Chemical, Inc. | Lumicryl® 101S is a UV/EB-curable acrylic macromer suitable for formulating coatings and inks. Cured coatings based on Lumicryl® 101S have abrasion and chemical resistance. Lumicryl® 101S can be used to formulate clear, pigmented or highly filled systems....view more Lumicryl® 101S is a UV/EB-curable acrylic macromer suitable for formulating coatings and inks. Cured coatings based on Lumicryl® 101S have abrasion and chemical resistance. Lumicryl® 101S can be used to formulate clear, pigmented or highly filled systems. Lumicryl® 101S can be used on film, laminate, plastic, metal, wood, paper or other substrates. view less | |
| Lumicryl® U-721S | Estron Chemical, Inc. | Lumicryl® U-721S is a UV/EB-curable acrylic macromer suitable for formulating coatings and inks. Cured coatings based on Lumicryl® U-721S have abrasion, scratch and chemical resistance, and mechanical properties (e.g. adhesion and flexibility). Lumicryl®...view more Lumicryl® U-721S is a UV/EB-curable acrylic macromer suitable for formulating coatings and inks. Cured coatings based on Lumicryl® U-721S have abrasion, scratch and chemical resistance, and mechanical properties (e.g. adhesion and flexibility). Lumicryl® U-721S can be used to formulate clear, pigmented or highly filled systems. It is 60-70% solids in Butyl Acetate. Lumicryl® U-721S is applied on film, laminate, plastic, metal, wood, paper or other substrates. view less | |
| Mowinyl 6520 | Nippon Gohsei | Mowinyl 6520 is a synthetic acrylic resin emulsion that provides good adherence to various substrates, as well as good water and alkaline resistances. This product is well suited for use in paints and coatings for metal surface applications. | |
| Mowinyl 6530 | Nippon Gohsei | Mowinyl 6530 is a synthetic acrylic resin emulsion that provides good adherence to various substrates, as well as good heat, water, alkaline, and blocking resistances. This product is well suited for use in paints and coatings for metal surface applicatio...view more Mowinyl 6530 is a synthetic acrylic resin emulsion that provides good adherence to various substrates, as well as good heat, water, alkaline, and blocking resistances. This product is well suited for use in paints and coatings for metal surface applications. view less | |
| nolax C35.3030 | nolax AG (Vanora) | nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, p...view more nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000 mPa•s at 20°C, a pH value of 7.5 ± 1, and a particle size of approximately 250 nm. view less | |
| Optirub™ OP A | Lawter | Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems an...view more Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax flotation and defoamer interactions. Optirub™ OP A is used in flexographic and packaging gravure inks as well as publication gravure inks and aqueous overprint varnishes. view less | |
| Optirub™ PC A | Lawter | Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC ...view more Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC A is suitable for use in flexographic and gravure inks, in heatset and sheet-fed inks and in UV metal deco inks. view less | |
| Optirub™ SP1 A | Lawter | Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single c...view more Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single component system. OptiruB™ SP1 A is used in flexographic and gravure inks and in heatset, sheet-fed, UV and metal decorating inks. view less | |
| OTL-B-5 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...view more OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-BE-50 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...view more OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-BE-51 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...view more OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-G-49 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...view more OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-R-52 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...view more OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-R-57 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...view more OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-W-58 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...view more OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-Y-53 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...view more OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-Y-54 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...view more OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| OTL-Y-55 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...view more OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. view less | |
| PAP-110 | FTC Korea Co.,Ltd | PAP-110 has excellent adhesion and weatherability (non-yellowing) properties. It also shows good chemical resistance and good solubility. It is suitable for use in metal adhesion for paint and lacquer, organic solvent-borne and water-borne paints, and tex...view more PAP-110 has excellent adhesion and weatherability (non-yellowing) properties. It also shows good chemical resistance and good solubility. It is suitable for use in metal adhesion for paint and lacquer, organic solvent-borne and water-borne paints, and textile fabrics. view less | Request Sample |
| Picassian® AC-191 | Stahl Polymers | Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...view more Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. view less | |
| Pigment Yellow RLT | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Pigment Yellow RLT is a high strength reddish yellow pigment with good resistance to light, weather, heat, and migration. This product has a density of 1.82 g/cm3 and a pH value of 6.5-7.5. It is commonly used in metal decorative paints, inks, automobile ...view more Pigment Yellow RLT is a high strength reddish yellow pigment with good resistance to light, weather, heat, and migration. This product has a density of 1.82 g/cm3 and a pH value of 6.5-7.5. It is commonly used in metal decorative paints, inks, automobile paints, and latex paints. view less | |
| PLIOTEC® HDT12 | Omnova Solutions | PLIOTEC® HDT12 is a unique styrene acrylic latex that, thanks to a proprietary Hydrophobic Dispersion Technology (HDT), provides an excellent water resistance, thus delivering corrosion protection for metal, even without the use of anticorrosive pigments....view more PLIOTEC® HDT12 is a unique styrene acrylic latex that, thanks to a proprietary Hydrophobic Dispersion Technology (HDT), provides an excellent water resistance, thus delivering corrosion protection for metal, even without the use of anticorrosive pigments. PLIOTEC® HDT12 can adhere to ferrous and non ferrous metals, for use on a variety of residential, commercial and industrial Direct-To-Metal (DTM) applications, from high gloss enamels to anticorrosive primers. view less | |
| PLIOTEC® HDT16 | Omnova Solutions | PLIOTEC® HDT16 is a styrene acrylic latex that provides excellent water resistance, adhesion to ferrous and non-ferrous metals and fast hardness development, hence ideally suitable for industrial Direct-To-Metal (DTM) applications, from high gloss enamels...view more PLIOTEC® HDT16 is a styrene acrylic latex that provides excellent water resistance, adhesion to ferrous and non-ferrous metals and fast hardness development, hence ideally suitable for industrial Direct-To-Metal (DTM) applications, from high gloss enamels to anticorrosive primers. PLIOTEC® HDT16 is also particularly suitable for the formulation of multi-surface renovation paints, for both horizontal and vertical uses, with superior adhesion on a wide variety of substrates including ceramic tiles, PVC, concrete, glass, wood, and PU foam. view less | |
| Polurene AC510 | S.A.P.I.C.I. SpA | Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This produ...view more Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This product contains less than .7% TDI isocyanates. view less | |
| Polurene MT 100 LLV | S.A.P.I.C.I. SpA | Polurene MT 100 LLV is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 75 | S.A.P.I.C.I. SpA | Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints a...view more Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints and enamels for metal, wood and plastics. This product contains less than .2% HDI isocyanates. view less | |
| Polurene MT 90 | S.A.P.I.C.I. SpA | Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanat...view more Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. view less | |
| Polurene MT 90 AB | S.A.P.I.C.I. SpA | Polurene MT 90 AB is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low-viscosity 2K paints and enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. |
